The coupling between advection and diffusion in position space can often lead to enhanced mass transport compared with diffusion without flow. An important framework used to characterize the long-time diffusive transport in position space is the generalized Taylor dispersion theory. In contrast, the dynamics and transport in orientation space remains less developed. In this work we develop a rotational Taylor dispersion theory that characterizes the long-time orientational transport of a spheroidal particle in linear flows that is constrained to rotate in the velocity-gradient plane. Similar to Taylor dispersion in position space, the orientational distribution of axisymmetric particles in linear flows at long times satisfies an effective advection–diffusion equation in orientation space. Using this framework, we then calculate the long-time average angular velocity and dispersion coefficient for both simple shear and extensional flows. Analytic expressions for the transport coefficients are derived in several asymptotic limits including nearly spherical particles, weak flow and strong flow. Our analysis shows that at long times the effective rotational dispersion is enhanced in simple shear and suppressed in extensional flow. The asymptotic solutions agree with full numerical solutions of the derived macrotransport equations and results from Brownian dynamics simulations. Our results show that the interplay between flow-induced rotations and Brownian diffusion can fundamentally change the long-time transport dynamics.

Flow resistance reduction, quantified as a change in flow rate with respect to a reference isothermal flow driven by the same pressure gradient, is realizable in a channel flow using a thermal wave applied on the bounding wall. Countercurrent waves provide a resistance-reducing effect at any wave velocity, Reynolds number and wavenumber considered. Cocurrent waves can reduce resistance only if the wave velocity is lower than a certain threshold, and the Reynolds number is larger than a certain threshold, otherwise, such waves increase resistance. The increase of the wave amplitude increases resistance reduction and resistance increase up to a specific limit. It is possible to reduce resistance up to 20 times compared with the isothermal channel using proper waves. It is shown that the same effect is achieved regardless of the waves applied at the upper and lower walls. The wave-modified flows are shown to be stable for the conditions used in this study.

High angle of attack flows over swept three-dimensional wings based on the NACA 0015 profile are studied numerically at low Reynolds numbers. Linear stability analysis is used to compute instability and receptivity of the flow via the respective three-dimensional (triglobal) direct and adjoint eigenmodes. The magnitude of the adjoint eigenvectors is used to identify regions of maximum flow receptivity to momentum forcing. It is found that such regions are located above the primary three-dimensional separation line, their spanwise position varying with wing sweep. The wavemaker region corresponding to the leading global eigenmode is computed and found to lie inside the laminar separation bubble (LSB) at the spanwise location of peak recirculation. Increasing the Reynolds number leads to the wavemaker becoming more compact in the spanwise direction, and concentrated in the top and bottom shear layers of the LSB. As sweep is introduced, the wavemaker moves towards the wing tip, following the spanwise displacement of maximum recirculation. Flow modifications resulting from application of different types of forcing are studied by direct numerical simulation initialised with insights gained from stability analysis. Periodic forcing at the regions of maximum receptivity to momentum forcing results in greater departure from the baseline case compared to same (low, linear) amplitude forcing applied elsewhere, underlining the potential of linear stability analysis to identify optimal regions for actuator positioning.

Standing acoustic waves have been known to generate Eulerian time-mean ‘streaming’ flows at least since the seminal investigation of Lord Rayleigh in the 1880s. Nevertheless, a recent body of numerical and experimental evidence has shown that inhomogeneities in the ambient density distribution lead to much faster flows than arise in classical Rayleigh streaming. The emergence of these unusually strong flows creates new opportunities to enhance heat transfer in systems in which convective cooling cannot otherwise be easily achieved. To assess this possibility, a theoretical study of acoustic streaming in an ideal gas confined in a rectangular channel with top and bottom walls maintained at fixed but differing temperatures is performed. A two time scale system of equations is utilized to efficiently capture the coupling between the fast acoustic waves and the slowly evolving streaming flow, enabling strongly nonlinear regimes to be accessed. A large suite of numerical simulations is carried out to probe the streaming dynamics, to highlight the critical role played by baroclinically generated wave vorticity and to quantify the additional heat flux induced by the standing acoustic wave. Proper treatment of the two-way coupling between the waves and mean flow is found to be essential for convergence to a self-consistent steady state, and the variation of the resulting acoustically enhanced steady-state heat flux with both the amplitude of the acoustic wave and the $O(1)$ aspect ratio of the channel is documented. For certain parameters, heat fluxes almost two orders of magnitude larger than those realizable by conduction alone can be attained.

The diffusiophoresis of charged hydrophobic nanoparticles (NPs) governed by an imposed ionic concentration gradient is analysed. The main objective is to elucidate the impact of the laterally mobile adsorbed surface ions at the interface on the propulsion of the hydrophobic NPs in diffusiophoresis. In addition, the dielectric polarization due to the difference in dielectric constant between the NPs and the suspension medium is also considered. The mobile surface ions create a friction as well as an electric force at the hydrophobic surface, which leads to a modification of the slip velocity condition and the slip length. We obtain an exact numerical solution of the governing electrokinetic equations in their full form by adopting a control volume formulation. The numerical model is supplemented by analytical solutions derived based on the Debye–Hückel linearization. We find that the lateral mobility of the surface ions obstruct the coions to diffuse from the higher concentration side to the lower concentration side, which results in a repulsive force to the particle leading to the occurrence of a negative mobility. Based on the numerical results and analytical solutions, we have shown that for a fully mobile surface charge, the diffusiophoresis of a hydrophobic NP is identical to the diffusiophoresis of a liquid droplet whose viscosity is related to the slip length of the hydrophobic particle. We establish that the dielectric polarization enhances the velocity of a hydrophobic particle, which has potential applications in the practical context.

The shoreline hazard posed by ocean long waves such as tsunamis and meteotsunamis critically depends on the fraction of energy transmitted across the shallow near-shore shelf. In linear setting, bathymetric inhomogeneities of length comparable to the incident wavelength act as a protective high-pass filter, reflecting long waves and allowing only shorter waves to pass through. Here, we show that, for weakly nonlinear waves, the transmitted energy flux fraction can significantly depend on the amplitude of the incoming wave. The basis of this mechanism is the formation of dispersive shock waves (DSWs), a salient feature of nonlinear evolution of long water waves, often observed in tidal bores and tsunami/meteotsunami evolution. Within the framework of the Boussinesq equations, we show that the DSWs efficiently transfer wave energy into the high wavenumber band, where reflection is negligible. This is phenomenologically similar to self-induced transparency in nonlinear optics: small amplitude long waves are reflected by the bathymetric inhomogeneity, while larger amplitude waves that develop DSWs blueshift into the transparency regime and pass through. We investigate this mechanism in a simplified setting that retains only the key processes of DSW disintegration and reflection, while the effects such as bottom dissipation and breaking are ignored. The results suggests that the phenomenon is a robust, order-one effect. In contrast, the increased transmission due to the growth of bound harmonics associated with the steepening of the wave is weak. The results of the simplified modelling are validated by simulations with the FUNWAVE-TVD Boussinesq model.

This work examines the control of cross-flow instabilities (CFIs) and laminar–turbulent transition on a swept wing, through the plasma-based base flow modification (BFM) technique. The effect of experimentally derived plasma body forces on the steady boundary layer base flow is explored through numerical simulations. Linear stability theory is subsequently used to predict the net BFM effect on CFIs. Based on these preliminary predictions, experiments are conducted in a low-turbulence wind tunnel where a spanwise-invariant plasma actuator is installed near the wing leading edge and operated at constant input voltage and frequency. Various flow parameters governing the plasma-based BFM technique are investigated, namely the Reynolds number, angle of attack and wavelength of excited stationary CFI modes. Stationary and travelling CFIs are quantified by planar particle image velocimetry while the transition topology and location are recorded by infrared thermography. The results confirm the stabilising effect of BFM on the swept-wing boundary layer. However, the plasma-based BFM is found to render the boundary layer more susceptible to travelling CFIs. In the presence of both net BFM effect and intrinsic plasma unsteady perturbations, the plasma-based BFM technique achieves transition delay with specific combinations of Reynolds number, angle of attack and wavelength of excited stationary CFI modes. The present findings provide insights into the fundamental principles of operating plasma actuators within the context of BFM control.

Recent numerical calculations have revealed the existence of fast jets in inviscid fluids when a pressure maximum exists close to a free boundary. This paper describes two-dimensional and axisymmetric configurations for which asymptotic analysis suggests that such jets can become infinitely long in finite time.

Small heavy particles cannot be attracted into a region of closed streamlines in a non-accelerating frame (Sapsis & Haller, Chaos, vol. 20, issue 1, 2010, 017515). In a rotating system of vortices, however, particles can get trapped (Angilella, Physica D, vol. 239, issue 18, 2010, pp. 1789–1797) in the vicinity of vortices. We perform numerical simulations to examine trapping of inertial particles in a prototypical rotating flow described by a rotating pair of Lamb–Oseen vortices of identical strength, in the absence of gravity. Our parameter space includes the particle Stokes number $St$, which is a measure of the particle's inertia, and a density parameter $R$, which measures the particle's density relative to the fluid. In particular, we study the regime $0< R<1$ and $0< St<1$, which corresponds to an inertial particle that is finitely denser than the fluid. We show that in this regime, a significant fraction of particles can be trapped indefinitely close to the vortices, and display extreme clustering into objects of smaller dimension: attracting fixed points and limit cycles of different periods including chaotic attractors. As $St$ increases for a given $R$, we may have an incomplete or complete period-doubling route to chaos, as well as an unusual period-halving route back to a fixed point attractor. The fraction of trapped particles can be a non-monotonic function of $St$, and we may even have windows in $St$ for which no particle trapping occurs. At $St$ larger than a critical value, beyond which trapping ceases to exist, significant fractions of particles can spend long but finite times in the vortex vicinity. The inclusion of the Basset–Boussinesq history (BBH) force is imperative in our study due to the finite density of the particle. We observe that the BBH force significantly increases the basin of attraction over which trapping occurs, and also widens the range of $St$ for which trapping can be realised. Extreme clustering can be of significance in a host of physical applications, including planetesimal formation by aggregation of dust in protoplanetary discs, and aggregation of phytoplankton in the ocean. Our findings in the prototypical model provide impetus to conduct experiments and further numerical investigations to understand clustering of inertial particles.

The volume filtering of the governing equations of a particle-laden flow allows for simulating the fluid phase as a continuum, and accounting for the momentum exchange between the fluid and the particles by adding a source term in the fluid momentum equations. The volume filtering of the Navier–Stokes equations allows consideration of the effect that particles have on the fluid without further assumptions, but closures arise of which the implications are not fully understood. It is common to either neglect these closures or model them using assumptions of which the implications are unclear. In the present paper, we carefully study every closure in the volume-filtered fluid momentum equation and investigate their impact on the momentum and energy transfer dependent on the filtering characteristics. We provide an analytical expression for the viscous closure that arises because the filter and spatial derivative in the viscous term do not commute. An analytical expression for the regularization of the particle momentum source of a single sphere in the Stokes regime is derived. Furthermore, we propose a model for the subfilter stress tensor, which originates from filtering the advective term. The model for the subfilter stress tensor is shown to agree well with the subfilter stress tensor for small filter widths relative to the size of the particle. We show that, in contrast to common practice, the subfilter stress tensor requires modelling and should not be neglected. For filter widths comparable to the particle size, we find that the commonly applied Gaussian regularization of the particle momentum source is a poor approximation of the spatial distribution of the particle momentum source, but for larger filter widths, the spatial distribution approaches a Gaussian. Furthermore, we propose a modified advective term in the volume-filtered momentum equation that consistently circumvents the common stability issues observed at locally small fluid volume fractions. Finally, we propose a generally applicable form of the volume-filtered momentum equation and its closures based on clear and well-founded assumptions. Based on the new findings, guidelines for point-particle simulations and the filter width with respect to the particle size and fluid mesh spacing are proposed.

We study the dynamics of thermal and momentum boundary regions in three-dimensional direct numerical simulations of Rayleigh–Bénard convection for the Rayleigh-number range $10^5\leq Ra \leq 10^{11}$ and $Pr=0.7$. Using a Cartesian slab with horizontal periodic boundary conditions and an aspect ratio of 4, we obtain statistical homogeneity in the horizontal $x$- and $y$-directions, thus approximating best an extended convection layer relevant for most geo- and astrophysical flow applications. We observe upon canonical use of combined long-time and area averages, with averaging periods of at least 100 free-fall times, that a global coherent mean flow is practically absent and that the magnitude of the velocity fluctuations is larger than the mean by up to 2 orders of magnitude. The velocity field close to the wall is a collection of differently oriented local shear-dominated flow patches interspersed by extensive shear-free incoherent regions which can be as large as the whole cross-section, unlike for a closed cylindrical convection cell of aspect ratio of the order 1. The incoherent regions occupy a 60 % area fraction for all Rayleigh numbers investigated here. Rather than resulting in a pronounced mean flow with small fluctuations about such a mean, as found in small-aspect-ratio convection, the velocity field is dominated by strong fluctuations of all three components around a non-existent or weak mean. We discuss the consequences of these observations for convection layers with larger aspect ratios, including boundary layer instabilities and the resulting turbulent heat transport.

As most mathematically justifiable Lagrangian coherent structure detection methods rely on spatial derivatives, their applicability to sparse trajectory data has been limited. For experimental fluid dynamicists and natural scientists working with Lagrangian trajectory data via passive tracers in unsteady flows (e.g. Lagrangian particle tracking or ocean buoys), obtaining material measures of fluid rotation or stretching is an active topic of research. To facilitate frame-indifferent investigations in unsteady and sparsely sampled flows, we present a novel approach to quantify fluid stretching and rotation via relative Lagrangian velocities. This technique provides a formal objective extension of quasi-objective metrics to unsteady flows by accounting for mean flow behaviour. For extremely sparse experimental data, fluid structures may be significantly undersampled and the mean flow behaviour becomes difficult to quantify. We provide a means to maintain the accuracy of our novel sparse flow diagnostics in extremely sparse sampling scenarios, such as ocean buoy data and Lagrangian particle tracking. We use data from multiple numerical and experimental flows to show that our methods can identify structures beyond existing limits of sparse, frame-indifferent diagnostics and exhibit improved interpretability over common frame-dependent diagnostics.

This research investigates the wake–foil interactions between two oscillating foils in a tandem configuration undergoing energy harvesting kinematics. Oscillating foils have been shown to extract hydrokinetic energy from free-stream flows through a combination of periodic heave and pitch motions, at relatively higher amplitudes and lower reduced frequency than thrust generating foils. When placed in tandem, the wake–foil interactions can govern the energy harvesting efficiency of the system due to a reduced relative flow velocity in combination with a structured and coherent wake of vortices shed from the high amplitude flapping of upstream foils. This work utilizes simulations of two tandem foils to parameterize and model the energy harvesting performance as a function of array configuration and foil kinematics. Once the wake of the leading foil has been fully parameterized, the placement, phase angle and kinematic stroke of the second foil is utilized to estimate the time-dependent power curve. The algorithm predicts the power of the second foil through the mean and unsteady wake characteristics, including the direct impingement of a vortex with the trailing foil.

The spatial evolution of various statistical parameters of fetch-limited waves generated by steadily blowing wind over mean water flow in a wind-wave flume is investigated experimentally. Measurements are performed in both along- and against-wind current conditions, and compared with measurements in the absence of current. A rake of capacitance-type wave gauges is used to measure surface elevation for a wide range of wind and water current velocities; additionally, an optical wave gauge is used to measure the directional properties of the wind-wave field in the presence of a mean water current at multiple locations. The variation with fetch of essential wave parameters such as characteristic wave energy, dominant frequency, power spectra and temporal coherence, as well as higher-order statistical moments that characterize wave shape, is presented for co- and counter-wind water currents, and compared with the no-current condition. The findings in the presence of mean water flow are interpreted in the framework of the viscous shear flow instability model of Geva & Shemer (Phys. Rev. Lett., vol. 128, 2022, 124501).

The present study reports experiments of water droplets impacting on ice or on a cold metal substrate, with the aim of understanding the effects of liquid solidification or substrate melting on the impingement process. Both liquid and substrate temperatures are varied, as well as the height of fall of the droplet. The dimensionless maximum spreading diameter, $\beta _m$, is found to increase with both temperatures as well as with the impact velocity. Here $\beta _m$ is reduced when liquid solidification, which enhances dissipation, is present, whereas fusion, i.e. substrate melting, favours the spreading of the impacting droplet. These observations are rationalized by extending an existing model of effective viscosity, in which phase change alters the size and shape of the developing viscous boundary layer, thereby modifying the value of $\beta _m$. The use of this correction allows us to adapt a scaling recently developed in the context of isothermal drop impacts to propose a law giving the maximum diameter of an impacting water droplet in the presence of melting or solidification. Finally, additional experiments of dimethyl sulfoxide drop impacts onto a cold brass substrate have been performed and are also captured by the proposed modelling, generalizing our results to other fluids.

Existing theoretical results for attenuation of surface waves propagating on water of random fluctuating depth are shown to over-predict the rate of decay due to the way in which ensemble averaging is performed. A revised approach is presented which corrects this and is shown to conserve energy. New theoretical predictions are supported by numerical results which use averaging of simulations of wave scattering over finite sections of random bathymetry for which transfer matrix eigenvalues are used to accurately measure decay. The model of wave propagation used in this paper is derived from a linearised long-wavelength assumption whereby depth averaging leads to time harmonic waves being represented as solutions to a simple ordinary differential equation. In this paper it is shown how this can be adapted to incorporate a model of a continuous covering of the surface by fragmented floating ice. Attenuation of waves through broken ice of random thickness is then analysed in a similar manner as bed variations have been previously. General features of the predicted attenuation are discussed in relation to existing theoretical models for attenuation due to multiple scattering through random ice environments and to field data, particularly in the model's ability to capture a ‘rollover effect’ at higher frequencies.

When subjected to external stress exceeding their yield stress ($\sigma _{Y}$), yield stress fluids (YSFs) undergo transition from solid to liquid. While the flow dynamics of capillary flows – including wetting, coating, spreading, and wicking – can be predicted accurately for fluids without yield stress, only a few asymptotic solutions have been validated against experiments for YSFs. In this study, we explore experimentally and theoretically the entire dynamics and solidifying process during capillary imbibition of YSFs, representing the fundamental aspect of capillarity-driven flow. We observe that during the gradual deceleration of capillary rise, YSFs exhibit apparent flow below $\sigma _{Y}$. This unexpected behaviour is linked to wall slip, manifested as plug flow in particle image velocimetry analyses. We introduce a model with numerical solutions, grounded in the rheological properties of YSFs and slip mechanisms, to accurately describe this liquid–solid transitional behaviour.

The Whitham equation is a non-local, nonlinear partial differential equation that models the temporal evolution of spatial profiles of surface displacement of water waves. However, many laboratory and field measurements record time series at fixed spatial locations. To directly model data of this type, it is desirable to have equations that model the spatial evolution of time series. The spatial Whitham (sWhitham) equation, proposed as the spatial generalization of the Whitham equation, fills this need. In this paper, we study this equation and apply it to water-wave experiments on shallow and deep water. We compute periodic travelling-wave solutions to the sWhitham equation and examine their properties, including their stability. Results for small-amplitude solutions align with known results for the Whitham equation. This suggests that the systems are consistent in the weakly nonlinear regime. At larger amplitudes, there are some discrepancies. Notably, the sWhitham equation does not appear to admit cusped solutions of maximal wave height. In the second part, we compare predictions from the temporal and spatial Korteweg–de Vries and Whitham equations with measurements from laboratory experiments. We show that the sWhitham equation accurately models measurements of tsunami-like waves of depression, waves of elevation, and solitary waves on shallow water. Its predictions also compare favourably with experimental measurements of waves of depression and elevation on deep water. Accuracy is increased by adding a phenomenological damping term. Finally, we show that neither the sWhitham nor the temporal Whitham equation accurately models the evolution of wave packets on deep water.