The recent study of Ren et al. (J. Fluid Mech., vol. 871, 2019, pp. 831–864) investigated the hydrodynamic linear stability of a compressible boundary layer over an insulated flat plate for a non-ideal gas (supercritical $\text{CO}_{2}$). In particular, the authors showed that in the transcritical regime (across the pseudo-critical line) the flow is strongly convectively unstable due to the co-existence of two unstable modes: Mode I, related to Tollmien–Schlichting instabilities and a new inviscid two-dimensional mode (Mode II) with a spatial growth rate one order of magnitude larger than Mode I for high Eckert numbers. In contrast to the transcritical regime, in the sub- and supercritical regimes, Mode II does not exist. Only Mode I drives the instabilities: viscous and two-dimensional for the subcritical regime and inflectional and three-dimensional for the supercritical regime.

Lipid membranes are examples of fluid deformable surfaces, which can be viewed as two-dimensional viscous fluids with bending elasticity. With this solid–fluid duality any shape change contributes to tangential flow and vice versa any tangential flow on a curved surface induces shape deformations. This tight coupling between shape and flow makes curvature a natural element of the governing equations. The modelling and numerical tools outlined in Torres-Sánchez et al. (J. Fluid Mech., vol. 872, 2019, pp. 218–271) open a new field of study by enabling the exploration of the role of curvature in this context.

A primary objective in turbulent thermal convection research is to understand and control the heat transport scaling behaviour. Previous studies have shown that the heat transport can be tuned by manipulating the boundary layer topographies with monoscale roughness elements. Now, Zhu et al. (J. Fluid Mech., vol. 869, 2019, R4) have demonstrated that with multiscale wall roughness, the heat transport law with an exponent of $1/2$ can be achieved for an extended range of the Rayleigh number, providing a new way to manipulate heat transport by tuning boundary topographies in turbulent flows.

The dynamics of spherical particles in a fluid flow is governed by the well-accepted Maxey–Riley equation. This equation of motion simply represents Newton’s second law, equating the rate of change of the linear momentum with all forces acting on the particle. One of these forces, the Basset–Boussinesq memory term, however, is notoriously difficult to handle, which prompts most studies to ignore this term despite ample numerical and experimental evidence of its significance. This practice may well change now due to a clever reformulation of the particle equation of motion by Prasath, Vasan & Govindarajan (J. Fluid Mech., vol. 868, 2019, pp. 428–460), who convert the Maxey–Riley equation into a one-dimensional heat equation with non-trivial boundary conditions. Remarkably, this reformulation confirms earlier estimates on particle asymptotics, yields previously unknown analytic solutions and leads to an efficient numerical scheme for more complex flow fields.

The flow of fluid through a pipe has been instrumental in illuminating the subcritical route to turbulence typical of many wall-bounded shear flows. Especially important in this process are the turbulent–laminar fronts that separate the turbulent and laminar flow. Four years ago Michael Graham (Nature, vol. 526, 2015, p. 508) wrote a commentary entitled ‘Turbulence spreads like wildfire’, which is a picturesque but also accurate characterisation of the way turbulence spreads through laminar flow in a straight pipe. In this spirit, the recent article by Rinaldi et al. (J. Fluid Mech., vol. 866, 2019, pp. 487–502) shows that turbulent wildfires are substantially tamed in bent pipes. These authors find that even at modest pipe curvature, the characteristic strong turbulent–laminar fronts of straight pipe flow vanish. As a result, the propagation of turbulent structures is modified and there are hints that the route to turbulence is fundamentally altered.

Whereas the flow of simple single-phase Newtonian fluids tends to become more complex as the characteristic length scale in the problem (and hence the Reynolds number) increases, for complex elastic fluids such as dilute polymer solutions the opposite holds true. Thus small-scale, so-called ‘microfluidic’ flows of complex fluids can exhibit rich dynamics in situations where the ‘equivalent’ flow of Newtonian fluids remains linear and predictable. In the recent study of Qin et al. (J. Fluid Mech., vol. 864, 2019, R2) of the flow of a dilute polymeric fluid past a $50~\unicode[STIX]{x03BC}\text{m}$ cylinder (in a $100\times 60~\unicode[STIX]{x03BC}\text{m}$ channel), a novel 3-D holographic particle velocimetry technique reveals the underlying complexity of the flow, including inherent three-dimensionality and symmetry breaking as well as strong upstream propagation effects via elastic waves.

The fundamental challenge to characterize and quantify thermal transport in the strongly nonlinear regime of Rayleigh–Bénard convection – the buoyancy-driven flow of a horizontal layer of fluid heated from below – has perplexed the fluid dynamics community for decades. Rayleigh proposed controlling the temperature of thermally conducting boundaries in order to study the onset of convection, in which case vertical heat transport gauges the system response. Conflicting experimental results for ostensibly similar set-ups have confounded efforts to discriminate between two competing theories for how boundary layers and interior flows interact to determine transport through the convecting layer asymptotically far beyond onset. In a conceptually new approach, Bouillaut, Lepot, Aumaître and Gallet (J. Fluid Mech., vol. 861, 2019, R5) devised a procedure to radiatively heat a portion of the fluid domain bypassing rigid conductive boundaries and allowing for dissociation of thermal and viscous boundary layers. Their experiments reveal a new level of complexity in the problem suggesting that heat transport scaling predictions of both theories may be realized depending on details of the thermal forcing.

An acoustically forced fluid system is known to generate a time-averaged mean, or streaming, flow that evolves on a slow time scale compared to the acoustic-wave period. Classical acoustic streaming in a homogeneous fluid is typically associated with a one-way coupled system wherein the oscillatory acoustic fields inform the streaming mean flow, without any appreciable feedback. In contrast, Michel & Chini (J. Fluid Mech., vol. 858, 2019, pp. 536–564) investigate acoustic streaming in a stratified fluid and demonstrate that the streaming is sufficiently strong to induce significant rearrangements of the background temperature and density fields, resulting in a strong coupling between the acoustic waves and mean flow. This new class of streaming, referred to as baroclinic acoustic streaming, is shown to result in altered streaming patterns with enhanced heat transport that makes possible a range of new applications.

Fluid mechanics and rheology involve many unsolved challenges related to the transport mechanisms of mass, momentum and energy – especially when it comes to realistic, industrially relevant materials. Very interesting are suspensions or granular fluids with solid, particulate ingredients that feature contact mechanics on the micro-scale, which affect the transport properties on the continuum- or macro-scale. Their unique ability to behave as either fluid, or solid or both, can be quantified by non-Newtonian rheological rules, and results in interesting mechanisms such as super-diffusion, shear thickening, fluid–solid transitions (jamming) or relaxation/creep. Focusing on the steady state flow of a granular fluid, one can attempt to answer a long-standing question: how do realistic material properties such as dissipation, stiffness, friction or cohesion influence the rheology of a granular fluid? In a recent paper Macaulay & Rognon (J. Fluid Mech., vol. 858, 2019, R2) shed new light on the effect cohesion can have on mass transport in sheared, sticky granular fluids. On top of the usual diffusive, stochastic modes of transport, cohesion can create and stabilise clusters of particles into bigger agglomerates that carry particles over large distances – either ballistically in the dilute regime, or by their rotation in the dense regime. Importantly, these clusters must not only be larger than the particles (defining the intermediate, meso-scale), but they must also have a finite lifetime, in order to be able to exchange mass with each other, which can seriously enhance transport in sticky granular fluids by rotection, i.e. a combination of rotation and convection.

The equations describing classical viscous fluid flow are notoriously challenging to solve, even approximately, when the flow is host to one or many immersed bodies. When an immersed body is slender, the smallness of its aspect ratio can sometimes be used as a basis for a ‘slender-body theory’ describing its interaction with the surrounding environment. If the fluid is complex, however, such theories are generally invalid and efforts to understand the dynamics of immersed bodies are almost entirely numerical in nature. In a valiant effort, Hewitt & Balmforth (J. Fluid Mech., vol. 856, 2018, pp. 870–897) have unearthed a theory to describe the motion of slender bodies in a viscoplastic fluid, ‘fluids’ such as mud or toothpaste which can be coaxed to flow, but only with a sufficiently large amount of forcing. Mathematical theories for some tremendously complicated physical systems may now be within reach.

Jet noise prediction is notoriously challenging because only subtle features of the flow turbulence radiate sound. The article by Brès et al. (J. Fluid Mech., vol. 851, 2018, pp. 83–124) shows that a well-constructed modelling procedure for the nozzle turbulence can provide unprecedented sub-dB prediction accuracy with modest-scale large-eddy simulations, as confirmed by detailed comparison with turbulence and sound-field measurements. This both illuminates the essential mechanisms of the flow and facilitates prediction for engineering design.