Traction of the head-neck is important in the treatment of patients suffering from neck pain due to degeneration of the intervertebral discs. Conventional neck traction is provided manually by experienced physical therapists who maintain a desired orientation of the head-neck relative to the trunk while applying the traction. It is postulated that innovative designs of neck exoskeletons can provide the same function both flexibly and accurately. This article presents a novel architecture of a parallel mechanism whose base sits on the human shoulders with 4 parallel chains, each chain having a revolute-revolute-universal-revolute (RRUR) structure, while the end-effector is connected rigidly to the human head. Each chain has five degrees-of-freedom (DOF) and applies a constraint on the motion of the end-effector. As a result, this parallel mechanism allows two DOFs to the end-effector. These are (i) forward flexion or lateral bending of the head and (ii) vertical translation. An important motivation for the current design with RRUR structure is to characterize the range of forward flexion/lateral bending of the head-neck with this structure and the vertical translation to the end-effector. A physical prototype was constructed and tested to evaluate the performance of this mechanism in hardware for the proposed application.

Robots have the capability to perform precise and minimally invasive surgeries. For the robot-assisted teleoperated fracture reduction surgery, the operating accuracy largely depends on visual reference through fluoroscopy. The operator needs to adjust several times according to computed tomography (CT) image. During the robot reduction surgery, there are large muscle forces generated by the numerous muscles surrounding the fractured segments. However, there is no effective reduction force feedback to the master robot. In this paper, in order to improve the operating accuracy of the fracture reduction with teleoperated surgery mode, six-dimensional constraints of the master robot are studied by utilizing the virtual fixture method, which can restrict the position and orientation through the force and visual guidance. The six-dimensional force sensor is used to collect information of the reduction force. For the master robot, a motor stall control method based on the current loop is adopted to provide feedback of the reduction force, which can enhance the surgeon’s sense of operational presence. To verify the effectiveness of virtual fixture and force feedback, the fracture reduction experiments are conducted on the fractured model with simulating lager muscle force. Experimental results show that the reduction errors are within acceptable ranges: $0.03\pm 0.73\textrm{mm}$, $0.54\pm 0.43\textrm{mm}$, $0.46\pm 1.05\textrm{mm}$, $1.05\pm 1.31^{\circ}$, $1.15\pm 1.91^{\circ}$, $1.09\pm 2.61^{\circ}$. The number of fluoroscopy procedures required ranges from 1 to 2 and the average operation time is approximately 170 s. Compared to traditional methods and other teleoperation methods, the fracture reduction accuracy and surgical efficiency of method in this paper are significantly improved.

This paper introduces a simplified matrix method for balancing forces and moments in planar parallel manipulators. The method resorts to Newton’s second law and the concept of angular momentum vector, yet it is not necessary to perform the velocity and acceleration analyses, tasks that were normally unavoidable in seminal contributions. With the introduction of natural matrices, the proposed balancing method is independent of the time and the trajectory generated by the moving links of parallel manipulators. The effectiveness of the method is exemplified by balancing two planar parallel manipulators.

In order to ensure safe and comfortable human–robot navigation in close proximity, it is imperative for robots to possess the capability to understand human behavioral intention. With this objective in mind, this paper introduces a Human-Aware Navigation (HAN) algorithm. The HAN system combines insights from studies on human detection, social behavioral model, and behavior prediction, all while incorporating social distance considerations. This information is integrated into a layer dedicated to human behavior intention cognition, achieved through the fusion of data from laser radar and Kinect sensors, employing Gaussian functions to account for individual private space and movement trend. To cater to the mapping requirements of the HAN system, we have reduced the computational complexity associated with traditional multilayer cost map by implementing a “first-come, first-served” expansion method. Subsequently, we have enhanced the trajectory optimization equation by incorporating an improved dynamic triangle window method that integrates human behavior intention cognition, leading to the determination of an appropriate trajectory for the robot. Finally, experimental evaluations have been conducted to assess and validate the efficacy of the human behavior intention cognition and the HAN system. The results clearly demonstrate that the HAN system outperforms the traditional Dynamic Window Approach algorithm in ensuring the safety and comfort of humans in human–robot coexistence environments.

This study focuses on development, task planning, and dynamic analysis of a previously proposed spherical parallel robot manipulator that is conceptually enhanced to adapt various brain surgery scenarios. Conceptual design of the proposed manipulator was briefly introduced and explained. In order to simulate one of the possible surgery scenarios, a case study of craniotomy was designed along with its trajectory planning. Dynamic analysis of proposed manipulator was performed by Lagrange method, and required actuator torque values were calculated for the desired trajectory. At the end of the study, hardware verification was carried out on the manufactured prototype of the system by comparing both calculated/acquired torque values and desired/actual trajectories. Promising verification results in terms of system dynamics and trajectory execution were introduced.

Rehabilitation robots help the treatment of diseases by performing cyclic exercises for a long period of time. These exercises must perform movements of the patient’s limbs; thus, the robots are required to be flexible and safe. Among rehabilitation robots, cable robots are widely used due to their unique properties, such as being lightweight and the possibility of being equipped with magnetic hooks to improve both safety and ease of use. However, the elasticity and flexibility of cables result in vibrations of the payload and hooks. In this paper, the forced vibrations due to rehabilitation exercises are studied. Since the previous studies of the authors showed a weak coupling between longitudinal and transverse vibrations, a two-cable planar model for the study of transverse vibrations is developed. The model makes it possible to study the forced transverse vibrations due to both cable motion and robot motion. Stiffness and damping of the patient’s arm are considered. Results show that the cable system exhibits a simple linear behavior when excited by robot motion and a non-linear behavior when excited by cable motion.

An eight-legged walking machine with purely mechanical control of leg motion has been built, based on an old design by Space-General Corporation. The paper describes its mechanical design, and experiments with it on a variety of surfaces.

To remove humans from hazardous environments “good” teleoperated robotic systems are needed. “Good” is defined here to mean a system which is task centred and which is transparent to the user-in other words, a system you can see through. A teleoperated robotic system which strives towards this goal is described by way of illustration. The fundamentals that have helped to achieve this are: design and build from a task centred viewpoint, careful design of the Human Computer Interface(HCI) and special consideration for the systems integration task.

This paper presents a systematic approach to the time-optimal motion planning of a cooperative two robot system along a prescribed path. First, the minimum-time motion planning problem is formulated in a concise form by parameterizing the dynamics of the robot system through a single variable describing the path. The constraints imposed on the input actuator torques and the exerted forces on the object are then converted into those on that variable, which result in the so-called admissible region in the phase plane of the variable. Considering the load distribution problem that is also involved in the motion, we present a systematic method to construct the admissible region by employing the orthogonal projection technique and the theory of multiple objective optimization. Especially, the effects of viscous damping and state-dependent actuator bounds are incorporated into the problem formulation so that the case where the admissible region is not simply connected can be investigated in detail. The resultant time-optimal solution specifies not only the velocity profile, but also the force assigned to each robot at each instant. Physical interpretation on the characteristics of the optimal actuator torques is also included with computer simulation results.

The paper presents an approach to automatic synthesis of program for robots in a flexible manufacturing cell (FMC). The system of program generation consists of two layers: Task-Level Programming Layer and Program Interpretation and Verification Layer. The first layer uses robot-independent planning techniques to create a work plan for robots (set of elementary actions) and program for each elementary action. The second layer uses robot-dependent planning methods to plan robot's trajectories and calculate the robot's motion times. A simulation model of whole FMC, which is created based on a description of FMC and program for robots, makes possible evaluation of efficiency of FMC work.

The dynamic model of a new class of underwater robot is derived and the validity of the model is checked experimentally. Close agreements between theory and experiment are attained. The interaction between the buoyancy and gravity forces acting on the robot arm, present in the underwater environment, is used to generate torques necessary to move the arm. The mathematical model of a multi-arm robot is developed to define the interaction between the dynamics of the moving weight and the robot links under the action of the resisting water drag and other external forces. The Lagrangian method is used in the formulation of the arm dynamics. The developed dynamic equations serve as means for designing the control laws necessary for controlling the position of the different joints of the robots. The study indicates that the buoyancy and gravity-driven robot can position a payload accurately as well as at a fairly fast speed of response. It is indicated from the theoretical and experimental study that the arm motion is created by a small displacement of moving weight on the power screw. Therefore, power requirement of this type of robot is just as enough to overcome the friction between the power screw and the moving weight. This features emphasize the potential of the concept as a viable means for driving underwater robots

This paper deals with the motivation behind robotics. It surveys the different goals of robotics research and analyses the ways in which robotics could help in various domains. After discussing the task specifications, emphasis is placed on three research sub-cultures that form separate robot “worlds”, viz. the Model World, the Industrial World and the Human World. The paper concludes with a case study to illustrate the need to reduce rash predictions and stimulate better science.

In this paper a method of minimal neighborhood for cost optimal trajectory planning along prescribed paths is introduced. The method exploits the phase-plane approach. In the phase-plane, in an iterative procedure, subareas of search are built, called neighborings, which surround the current-best trajectory. In each iteration, in order to find the next-best trajectory, the dynamic programming (pruned to the subarea) is used. The method of minimal neighborhood makes the neighborings as small as possible and therefore speeds up computations maximally. The tests carried out on a model of the IRb-6 ASEA robot have shown that the method of minimal neighborhood is much faster than dynamic programming applied to the whole phase-plane, while preserving the quality of the resulting trajectory.

The mass balancing of robotic manipulators has been shown to have favorable effects on the dynamic characteristics. In actual practice, however, since conventional manipulators have flexibility at their joints, the improved dynamic properties obtainable for rigid manipulators may be influenced by those joint flexibilities. This paper investigates the effects of the joint flexibility on the dynamic properties and the controlled performance of a balanced robotic manipulator. The natural frequency distribution and damping characteristics were investigated through frequency response analyses. To evaluate the dynamic performance a series of simulation studies of the open loop dynamics were made for various trajectories, operating velocities, and joint stiffnesses. These simulations were also carried out for the balanced manipulator with a PD controller built-in inside motor control loop. The results show that, at low speed, the joint flexibility nearly does not influence the performance of the balanced manipulator, but at high speed it tends to render the balanced manipulator susceptible to vibratory motion and yields large joint deformation error.