Polymer-based composites modified with organoclay are economically beneficial candidates for a variety of applications. Different types of impurities accompany montmorillonite phases in various bentonites, which impact the quality and cost of organoclays and final composites. To obtain organoclays for clay composite applications, eight Iranian raw bentonites from different geographical locations were selected as the candidates and characterized by X-ray diffraction (XRD). Sample IB was chosen due to its high purity and lower cristobalite content than the other samples. It was purified by centrifugation or sedimentation methods using a sodium hexametaphosphate (NaHMP) dispersant. The cation-exchange capacity (CEC) was measured for bentonite before and after purification by sedimentation, and it showed a significant increase from 6.944 to 12.128 eq g–1, confirming successful purification. Organoclays were prepared using purified bentonite (sedimentation method) with two surfactants (cetyltrimethylammonium bromide and octadecylamine), and the amount of octadecylamine was optimized. Purified bentonite and organoclay were characterized by XRD, scanning electron microscopy (SEM) and X-ray fluorescence. The results indicate that most of the impurities were removed after purification, and the interlayer space of organoclays increased to 35 Å in the optimized sample prepared with an amount of octadecylamine that was twice the CEC in purified bentonite. The prepared organoclay was used to improve low-density polyethylene (LDPE) polymer properties. The clay–polymer composite properties were studied by field emission SEM, thermogravimetric analysis and tensile strength tests. The organoclay was fully dispersed in the LDPE matrix and in the sample with 5 wt.% of organoclay, where Ti (the temperature at which 10% of the sample is decomposed) and T50% (the midpoint of degradation) were 17°C and 13°C greater than those of polyethylene, respectively. Additionally, the sample residue with 5 wt.% of organoclay at 600°C was 43.4%. The tensile strength of polyethylene increased from 8.67 to 9.03 MPa in the sample with 4 wt.% of organoclay.

The nature of the siloxane surface in smectites was investigated by measuring the adsorption of aromatic hydrocarbons from water by organo-clays. The organo-clays were prepared by replacing the hydrophilic, inorganic exchange cations of a series of smectites with the small, hydrophobic organic cation, trimethylphenylammonium (TMPA). Smectites with a range in charge densities were used that resulted in different TMPA contents in the organo-clays. Adsorption isotherms of benzene, alkylbenzenes, and naphthalene from water by the TMPA-smectites indicated that sorption was inversely related to TMPA content. The Langmuir form of the isotherms suggests that the aromatic compounds adsorb to the clay surface. Possible adsorptive sites in TMPA-smectites are limited to the TMPA cations and the siloxane oxygen surfaces. Because sorption increased as layer charge and TMPA content decreased, the organic compounds must adsorb to the siloxane surfaces.

Calculations based on an adsorbed compound monolayer, which was estimated by fitting adsorption data to the Langmuir equation, and the N2 specific surface area of each TMPA-clay, indicate that the surface area occupied by each adsorbed molecule increases as the planar area of the molecule increases. This strongly indicates that the planar surfaces of the compounds adsorb directly to the clay surface. Apparently, the TMPA cations function to keep the smectite interlayers open. Interactions between the phenyl groups of TMPA cations on opposing interlayer clay surfaces may act to increase the size of the adsorptive regions. These results show that the siloxane surfaces of smectites can effectively adsorb aromatic hydrocarbons from water if the hydrophilic, inorganic exchange cations are replaced with small, hydrophobic organic cations. The strong adsorption of hydrophobic organic molecules from water demonstrates the hydrophobicity of the siloxane surfaces in smectites.

Sorptive properties of organoclays may be greatly influenced by the physicochemical properties of organic sorbates. Hexadecyltrimethylammonium(HDTMA) clays were prepared using a high-charge smectite (HDTMA-SAz-1), a low-charge smectite (HDTMA-SWy-2), and an illite (HDTMA-ILL). The resultant organoclays were used to sorb aqueous phase 1,2-dichlorobenzene (o-DCB), 1,3-dichlorobenzene (m-DCB), and 1,4-dichlorobenzene (p-DCB). Sorptive characteristics of these compounds were determined by their molecular polarities (o-DCB > m-DCB > p-DCB) and the HDTMA-clay interlayer distance. HDTMA-ILL was used for comparison to HDTMA-SAz-1 and HDTMA-SWy-2. All dichlorobenzene isomers were directly intercalated in the interlayers of HDTMA-SAz-1, causing interlayer expansion. o-DCB and m-DCB were not intercalated in the interlayers of HDTMA-SWy-2 at low concentrations, but intercalation occurred at higher concentrations, which caused interlayer expansion. The concentration needed to produce interlayer expansion depended on the solute molecular polarity, hence a higher concentration of m-DCB than o-DCB was required. p-DCB was sorbed primarily by the HDTMA phase on the external surfaces of HDTMA-SWy-2. In the presence of chlorobenzene (CB), p-DCB sorption by HDTMA-SWy-2 is greatly enhanced, owing to the interlayer expansion by CB and a cosolvent effect. Sorption of o-DCB resulted from both direct solvation-type interactions with HDTMA and partitioning into HDTMA. Such sorption results in double-sigmoid isotherms. m-DCB weakly solvates the HDTMA and partitions into the HDTMA, displaying either a double-sigmoid or a type-III isotherm depending on clay type. p-DCB lacks ability to solvate HDTMA and partitions into HDTMA as its sole mechanism, producing type-III isotherms. HDTMA-clays are potentially effective for treating dichlorobenzene-contaminated wastewater.

Adsorption studies of aromatic hydrocarbons of various molecular sizes on organo-clays in aqueous solution were carried out for characterizing the surface heterogeneity of organo-clays. Benzene, toluene, p-xylene, ethylbenzene and n-propylbenzene adsorption by a smectite with 5 different exchange degrees of trimethylphenylammonium (TMPA) cations for Ca2+ was measured. The Langmuir isotherm equation did not adequately describe the experimental data, especially for small molecules, whereas the Dubinin-Radushkevich (DR) equation combined with a gamma-type adsorption energy distribution function described all experimental data well, suggesting the surface and structural heterogeneity of TMPA-smectites. The calculated adsorption energy distributions indicated that the apparent heterogeneity depends on the molecular size of adsorbates. Small adsorbate molecules such as benzene explore a highly heterogeneous surface of TMPA-smectites while large molecules such as n-propylbenzene detect a relatively homogeneous surface. The surface fractal dimension was dependent on the extent of TMPA exchange for Ca2+. When TMPA content is less than 75% of the cation exchange capacity (CEC) of the smectite, the heterogeneity decreases as TMPA content increases; it increases with TMPA content thereafter. These results are related to the size distribution of micropores in TMPA-smectites, which are defined by the 2 semi-infinite aluminosilicate sheets and the interlayer cations. The micropore size distributions and, hence, heterogeneity are created in part by the inhomogeneity of the charge density of clay surfaces and the tendency for cation segregation in these systems.

Montmorillonites saturated with small quaternary alkylammonium ions such as tetramethyl-ammonium (TMA) or trimethylphenylammonium (TMPA) are excellent sorbents for aromatic pollutants. In some cases, water inhibits arene sorption, but the inhibition mechanism is not understood completely. The objectives of this study were to determine whether arenes interact with adsorbed TMA and TMPA ions and/or with siloxane surfaces, and how water affects these interactions. We reacted benzene and ethylbenzene vapors with normal- and reduced-charge TMA- and TMPA-montmorillonite films at several relative humidities, and obtained infrared spectra of the resulting sorbate-clay complexes. Arene sorption caused the methyl asymmetric deformation vibrations adsorbed TMA and TMPA to shift to lower wave-number, whereas water sorption caused shifts to higher wavenumber. In the absence of water, benzene and ethylbenzene adsorbed on the siloxane surface as well as interacted directly with TMA and TMPA ions. The proportion of TMA and TMPA ions that interacted with benzene and ethylbenzene was greater for reduced-charge than normal-charge montmorillonite. Comparison of the HOH deformation and cation methyl asymmetric deformation vibrations indicated that both benzene and ethylbenzene inhibited water sorption substantially, and that water more readily displaced benzene and ethylbenzene from TMA and TMPA ions than from siloxane surfaces. Water inhibited arene sorption mainly by hydrating exchangeable cations, thereby obscuring siloxane surfaces adjacent to adsorbed TMA and TMPA ions and decreasing the average pore dimensions. These results indicate that in the presence of bulk water, arene adsorption likely occurs primarily on the siloxane surface.

Vermiculite from Santa Olalla, Spain, was intercalated with tetramethylphosphonium [P(CH3)4+ = TMP], using a TMP-bromide solution at 70°C for three weeks. The resulting TMP-exchanged vermiculite, which contained a small (<5% of a site) amount of residual interlayer Ca, showed near perfect three-dimensional stacking. Cell parameters are a = 5.3492(8) Å, b = 9.266(2) Å, c = 14.505(6) Å, β = 97.08(2)°, space group is C2/m, and polytype is lM. Single-crystal X-ray refinement (R = 0.052, wR = 0.061) located two crystallographically unique sites for the phosphorus atoms (TMP molecule). The phosphorus atoms are occupied partially [P1 = 0.146(6), P2 = 0.098(5)] and are offset from the central plane of the interlayer by 1.23 Å to form two P-rich planes in the interlayer. Electrostatic interactions between the P cations and basal oxygen atoms essentially balance the negative charge associated with Al for Si substitutions in the tetrahedral sites. In addition, the orientations of the TMP molecules are probably different owing to packing constraints. The H2O site is located in the center of the interlayer, at the center of the silicate ring, and ∼3.09 Å from the Ca, which is also located on the central plane of the interlayer. Other H2O molecules are present in the interlayer, but could not be located by the diffraction experiment because they are randomly positioned in the interlayer. The tetrahedral rotation angle, α, is affected by the intercalation of TMP relative to tetramethylammonium (TMA), thus indicating that 2:1 layers are not simply rigid substrates, and that dynamic interactions occur during reactions involving adsorption and exchange.

Vermiculite crystals from Santa Olalla, Spain, were first Na exchanged and then intercalated with monomethylammonium (= NH3(CH3)+, MMA) and dimethylammonium (= NH2(CH3)2+, DMA) molecules, respectively, by immersion in 1 M ammonium-chloride solutions at 65°C for 2–3 wk. MMA-and DMA-exchange with vermiculite resulted in crystals with near perfect three-dimensional stacking, suitable for single crystal X-ray diffraction analysis. Unit cell parameters are: a = 5.353(2) Å, b = 9.273(3) Å, c = 11.950(6) Å, and ß = 98.45(4)° for MMA-exchanged vermiculite and a = 5.351(2) Å, b = 9.268(4) Å, c = 12.423(8) Å, and ß = 98.33(5)° for DMA-exchanged vermiculite. Refinement results are R = 0.059 and wR = 0.073 (MMA-exchanged vermiculite) and R = 0.059 and wR = 0.064 (DMA-exchanged vermiculite). The results are based on structures which show substitutional disorder, and thus the presented models are derived from average structures.

There are two distinct sites for the MMA molecule in MMA-exchanged vermiculite. One crystallo-graphically unique MMA is oriented such that the N-C axis of the molecule is perpendicular to the basal oxygen plane, with the N ion offset from the center of the interlayer by 1.04 Å. The other MMA is located such that the N ion is at the center of the interlayer between adjacent 2:1 layers, presumably with the N-C axis of the molecule oriented parallel to the basal oxygen plane. This represents the first known occurrence of an organic molecule located exactly between the two adjacent 2:1 layers. Both sites are located between hexagonal cavities of adjacent layers. DMA molecules in DMA-exchanged vermiculite are located such that the N ion is offset from the central plane in the interlayer by 0.95 A. A static model is proposed with two orientations of DMA to produce a DMA “zigzag” orientation of molecules parallel to the (001) plane. The plane defined by the C-N-C atoms in the molecule is perpendicular to the (001) plane. An alternate model is more dynamic, and it involves the rotation of DMA molecules about one C-N axis.

Identical starting material was used in previous studies on tetramethylammonium (TMA)-exchanged vermiculite and tetramethylphosphonium (TMP)-exchanged vermiculite. The effect of onium-ion substitutions on the 2:1 layer shows that the tetrahedral rotation angle, α, is significantly smaller for MMA-and DMA-exchanged vermiculite vs. TMA and TMP-exchanged vermiculite. Tetrahedral and octahedral bond distances of the 2:1 layer of the TMA, TMP, MMA, and DMA-exchanged structures may be explained by the location of the organic cation relative to the basal oxygen atom plane and by the differences in the geometries of the organic molecule. Thus, the 2:1 layer is affected by the interlayer molecule, and the 2:1 layer is not a rigid substrate, but interacts significantly with the onium ions.

Organoclays were prepared by exchanging Ca2+ in a Ca2+-saturated smectite partially or fully with trimethylphenylammonium (TMPA) cations. The mechanistic function of these organoclays as adsorbents for neutral organic compounds in aqueous solution was examined. TMPA cations were found to take a random distribution on the surfaces of mixed Ca/TMPA-smectites. The presence of TMPA, and its random distribution, resulted in water associated with the clay surfaces being held more weakly. Apparently, the interspersing of TMPA and Ca2+ ions prohibits the formation of a stable network of water molecules around Ca2+. Water molecules associated with the siloxane surface in mixed Ca/TMPA-clays are removed during the adsorption of neutral organic compounds from bulk water, leaving only ∼11 strongly held water molecules around each Ca2+, as opposed to ∼58 water molecules in homoionic Ca2+-smectite. These results demonstrate that the amount of water associated with the clay surfaces and interlayers depends on the nature of the exchange cation(s), and not on the amount of available siloxane surface area by itself. We conclude that in TMPA-smectites the TMPA cations function as nonhydrated pillars, and sorption of organic solutes occurs predominantly on the adjacent siloxane surfaces, which are hydrophobic in nature. The water molecules around Ca2+ in mixed Ca/TMPA-smectites obscures some of the siloxane surfaces. This diminishes sorption capacity, in an amount roughly equivalent to the fraction of the CEC occupied by Ca2+, because organic solutes cannot displace the waters of hydration of Ca2+.

The antibacterial, antifungal and antioxidant effects of halloysite nanoclay, Cloisite 10A (C10A) and Cloisite 15A (C15A) organonanoclays were examined in this study. The antimicrobial action was assessed using the agar-well method and the disc diffusion method. The free radical-scavenging effects of the clays were determined using the 2,2-diphenyl-1-picrylhydrazyl method. Halloysite showed antimicrobial activity against Pseudomonas aeruginosa, Enterococcus faecalis and Staphylococcus aureus. C10A was effective against both Gram-positive bacteria (S. aureus, Listeria monocytogenes, Bacillus subtilis and E. faecalis) and Gram-negative bacteria (Escherichia coli, Klebsiella pneumoniae and P. aeruginosa). Additionally, only C10A was found to have an antimicrobial effect on Candida glabrata of 18 mm amongst the tested clays. C15A showed an antimicrobial effect on S. aureus and K. pneumoniae. It was determined that the antifungal properties of organoclays were higher than those of halloysite. The most effective clay type was determined to be C10A. The positively charged inner surface of the halloysite nanoclay can provide a large area to which negatively charged free radicals can attach. The modified C15A used in this study has two long-chain alkyl groups attached, whereas the modified C10A has a single long-chain alkyl group and a benzyl group attached. It is proposed that the differences in these antimicrobial effects are due to the structures of the molecules. According to these results, organoclays as green source materials could be used as additives and coatings in food processing, biomedical devices, filters and paints due to their antimicrobial and antioxidant properties.

A low-charge Na-montmorillonite (SWy-2) was exchanged with hexadecyltrimethyl-ammonium (HDTMA) at levels equal to 20, 40, 60, 70, 80, 90, 100, 150 and 200% of the cation exchange capacity (819 mmol(+)/kg) to determine the nature of adsorption and the ionic composition of the clay interlayers. In contrast with earlier work with smaller aliphatic cations, which suggested random interstratification of interlayers occupied by either organic or metallic cations, there was no evidence of cation segregation into homogeneous interlayers. Instead, X-ray analysis indicated that the organic cations assumed two dominant configurations which were roughly equivalent in prevalence at ∼70% coverage of the CEC. Below 70% exchange the organocations existed predominantly in heterogeneous monolayers with Na+, attaining basal spacings of between 1.41 and 1.44 nm which were sensitive to changes in relative humidity. Relative humidity effects indicated that Na+ and HDTMA occupied functionally discrete domains within the interlayer as shown by the free interaction of water and a neutral organic solute, naphthalene, with Na+ and HDTMA, respectively. At greater levels of HDTMA exchange (up to 100% of the CEC), the organocations assumed a predominantly bilayer configuration. Transition to a fully-developed bilayer indicated by a 1.77 nm d-spacing at 100% coverage was gradual, suggesting some interstratification of the monolayers and bilayer configurations between 70 and 100% exchange. Sorption of naphthalene to the organoclays within this range of coverage was well correlated with clay organic carbon content, consistent with relatively unimpeded interlayer access of neutral organic molecules.

A series of organoclays with monolayers, bilayers, pseudotrilayers, paraffin monolayers and paraffin bilayers were prepared from montmorillonite by ion exchange with hexadecyltrimethylammonium bromide (HDTMAB). The HDTMAB concentrations used for preparing the organoclays were 0.5, 0.7, 1.0, 1.5, 2.0 and 2.5 times the montmorillonite cation exchange capacity (CEC). The microstructural parameters, including the BET-N2 surface area, pore volume, pore size, and surfactant loading and distribution, were determined by X-ray diffraction, N2 adsorption-desorption and high-resolution thermogravimetric analysis (HRTG). The BET-N2 surface area decreased from 55 to 1 m2/g and the pore volume decreased from 0.11 to 0.01 cm3/g as surfactant loading was increased from Na-Mt to 2.5CEC-Mt. The average pore diameter increased from 6.8 to 16.3 nm as surfactant loading was increased. After modifying montmorillonite with HDTMAB, two basic organoclay models were proposed on the basis of HRTG results: (1) the surfactant mainly occupied the clay interlayer space (0.5CEC-Mt, 0.7CEC-Mt, 1.0CEC-Mt); and (2) both the clay interlayer space and external surface (1.5CEC-Mt, 2.0CEC-Mt, 2.5CEC-Mt) were modified by surfactant. In model 1, the sorption mechanism of p-nitrophenol to the organoclay at a relatively low concentration involved both surface adsorption and partitioning, whereas, in model 2 it mainly involved only partitioning. This study demonstrates that the distribution of adsorbed surfactant and the arrangement of adsorbed HDTMA+ within the clay interlayer space control the efficiency and mechanism of sorption by the organoclay rather than BET-N2 surface area, pore volume, and pore diameter.

The size of quaternary ${\text{NH}}_4^{+}$ cations defines their packing configurations in the interlayers and the basal spacings of organoclays, and hence strongly influences the sorptive properties of organoclays. A series of organoclays (TAA-SACs) was prepared from a smectite (SAC) fully exchanged with symmetrical tetraalkylammonium (TAA) cations of progressively increasing sizes with the carbon number of single alkyl group from 1 to 6. X-ray diffraction analysis indicated the packing configurations of monolayer, monolayer-to-bilayer transition, bilayer, and bilayer-to-trilayer transition in the interlayers of SAC. Calculations of the interionic distances between TAA ions support such packing configurations. Sorption of benzene by TAA-SACs displayed a high-low-high uptake trend and progressively weaker sorptive interactions as the size of TAA ions increased. Both the siloxane surfaces and TAA ions contributed to the overall sorption, with their relative contributions dependent on the TAA interionic distances and the basal spacings of TAA-SACs. High benzene sorption by small TAA-SAC (tetramethylammonium(TMA)-SAC) was attributed to the strong interactions between the siloxane surfaces and benzene molecules. With large TAAs, high sorption was due to the effective solute partitioning. Compared to benzene sorption, TCE sorption by small TAA-SACs (TMA-SAC and tetraethylammonium(TEA)-SAC) was less effective and displayed an abnormal trend, due largely to the lack of the siloxane surface-TCE interactions and to the stronger hydration of TMA as compared to TEA ions. The results provide strong evidence to support the use of either small or large quaternary ${\text{NH}}_4^{+}$ cations in preparation of organoclays as effective sorbents for removing organic contaminants from water.

Catanionic surfactant systems are used as drug-delivery vehicles and as nanocompartments in the formation of biomaterials and nanosized particles. Clay minerals are compatible with organic tissues and also have biomedical applications. The aim of the present study was to combine the properties of catanionic surfactants and clay minerals to obtain new materials with potential uses in medicine, waste-water treatment, and antibacterial applications. The surfactants chosen to make the catanionic surfactant were cetylpyridinium (CP) and lauroyl sarcosinate (SR), which interact strongly in aqueous media and cause specific aggregations such as ion-pair amphiphiles and needle- and leaf-like structures. Aside from the aqueous solution, new ternary systems are formed with different structures and properties through the addition of montmorillonite (Mnt). The surface and interlayer structures of the different Mnt-CP-SR samples prepared by using CP and SR in amounts equal to various ratios of cationic exchange capacity of the clay mineral were studied. They were also compared with the structured surfactant aggregates formed in aqueous media. The Mnt-CP-SR samples were subjected to X-ray diffraction (XRD), thermogravimetric analyses, and zeta-potential measurements to elucidate the interlayer- and external-surface structures. The XRD analyses showed the formation of a compact structure in the interlayer region resulting from the interaction between randomly oriented pyridinium and negatively charged SR head groups. The triple interactions among the Mnt surface, CP, and SR were more complex than the double interactions between the Mnt and cationic surfactant, and the CP played a dominant role in the formation of external and interlayer surface structures regardless of the amount and order of the addition of SR. The new findings support new applications for organoclays in the fields of biomedicine, remediation of polluted water, and nanocomposite materials.

Hydrophobicity, swellability, and dispersion are important properties for organo-montmorillonites (OMnt) and have yet to be fully characterized for all OMnt configurations. The purpose of the present work was to examine the preparation of OMnt from the reaction of Ca2+-montmorillonite (Ca2+-Mnt) with a high concentration of surfactant and to reveal the relevant properties of hydrophobicity and dispersion of the resultant OMnt. A series of OMnt samples were prepared using a small amount of water and cetyltrimethylammonium bromide (CTAB) with a concentration more than the CTAB critical micelle concentration (CMC). The relationship between OMnt microstructure and the hydrophobicity and swellability properties was investigated in detail. The resulting OMnt samples were characterized using powder X-ray diffraction patterns (XRD), Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric and differential thermogravimetry (TG-DTG), water contact angle tests, swelling indices, and transmission electron microscopy (TEM). The addition of CTAB and water in the OMnt preparation affected the OMnt microstructure and properties. An increase in CTAB concentration led to a more ordered arrangement of cetyltrimethylammonium (CTA+) cations in the interlayer space of the OMnt and a large amount of CTA+ cations on the outer surfaces of the OMnt. The swelling indices and the water contact angles of OMnt samples depended on the distribution of the CTAB surfactant on OMnt and the orientation of the surfactant hydrophilic groups on the inner and on the outer surfaces of OMnt. A maximum swelling index of 39 mL/g in xylene was achieved with an average water contact angle of 62.0° ± 2.0° when the amount of CTAB added was 2 times the cation exchange capacity (CEC) of Mnt and the lowest water to dry Mnt mass ratio was 3 during the preparation of OMnt samples. The platelets of OMnt aggregated together in xylene by electrostatic attraction and by hydrophobic interactions.

The structure of trimethylsulfoxonium-exchanged vermiculite has been examined to compare it with other onium-exchanged structures, such as tetramethylammonium- and tetramethylphosphonium-exchanged vermiculite. The three organic cations are tetrahedral in shape, but trimethylsulfoxonium [(CH3)3SO+] has an oxygen atom replacing a methyl group at one apex. This study describes the effect this substitution and the larger S atom have on the site location in the interlayer and the effect on the vermiculite 2:1 layer. These clay minerals may be commercially useful as adsorbents.

Na-exchanged crystals of vermiculite from Santa Olalla, Spain, were intercalated with trimethylsulfoxonium [Me3SO+ = (CH3)3SO+] molecules by refluxing in an aqueous 0.25 M trimethylsulfoxonium iodide solution at 80°C for 14 days. The resulting Me3SO+-exchanged vermiculite crystals were studied by single-crystal, X-ray diffraction methods and by computer modeling (density functional theory). Cell parameters are a = 5.349(2), b = 9.270(3), c = 13.825(8) Å, and β = 97.40(4)°, the space group is C2/m, and the polytype is 1M. Refinement results (R = 0.073, wR = 0.080) show that in the average structure of C2/m, the S atoms of the Me3SO+ molecules form two partially occupied planes [2.066(2) Å from each basal oxygen plane] between the 2:1 layers, and the S atoms show considerable positional disorder. The O atom of the Me3SO+ molecule occurs in the central plane of the interlayer, as far away from each 2:1 layer as possible. In projection down the c* axis, the Me3SO+ molecule resides within the center of the silicate rings from each adjacent 2:1 layer. In the ideal (static) model of the Me3SO+-exchanged vermiculite structure, the Me3SO+ molecule is oriented such that two methyl groups point toward charge-deficient bridging oxygen atoms of the basal plane; thus, the organic pillars charge compensate the bridging oxygen atoms of the 2:1 layer that are charge deficient. In projection, the oxygen atom of the Me3SO+ molecule projects over a tetrahedron containing Si. Computer modeling showed that if H2O is not included in the model, the Me3SO+ molecule (S and O atoms) is in the center of the interlayer, but with the addition of randomly placed H2O, two partially occupied planes similar to the X-ray derived model are formed.

Bromide-containing impurities were found to decrease the thermal stability of quaternary alkyl ammonium-modified layered silicates. Improved purification procedures completely removed bromide and led to a 20°C to >100°C increase in organic modified layered silicate thermal stability. Using mass spectrometry and thermal and electrochemical analysis, N,N-dimethyl-N,N-dioctadecyl quaternary ammonium-modified montmorillonite and fluorinated synthetic mica were found to degrade primarily through elimination and nucleophilic attack by these anions. The nature of residual bromides was identified and quantified, and the efficiency of removing these anions was found to be solvent dependent; sequential extraction, first ethanol then tetrahydrofuran, gave the best results. This exhaustive extraction method represents a viable alternative to the use of expensive, more thermally stable oniumion treatments for layered silicates.

This work determines the optimal palygorskite (Plg) content (maximum surfactant adsorption point) to achieve organophilization using the cationic surfactant cetyltrimethyl ammonium bromide (CTAB) at various concentrations. Adsorption assays were carried out in a finite bath after varying the content of Plg and CTAB in solution. In those assays, the effects of time, temperature, pH and thermodynamic characteristics were studied. The results were analysed using the Langmuir, Freundlich, Dubinin–Radushkevich and Tempkin adsorption models. The increase in clay content in the dispersion leads to a decrease in adsorption of surfactant on the clay. It was possible to obtain the optimal Plg content to achieve organophilization at various concentrations of CTAB surfactant. The experimental data fitted well to the Freundlich model. The Dubinin–Radushkevich and Tempkin isotherms confirmed the chemical adsorption of CTAB on Plg clay.

The intercalation of the cationic surfactant cetyltrimethylammonium (C16TMA) into the interlayer of an acid-activated clay in the presence of different anions has been studied in detail. When Br or OH anions were used, the basal spacing increased significantly, the increase being related to the loading concentration of the surfactant solution. For intercalated compounds prepared from the hydroxide form, the basal spacing at room temperature varied from 1.6 to 3.8 nm. However, for organoclays prepared from the surfactant bromide, the basal spacing is almost loading- independent (1.9 nm). The use of hydroxide and bromide at higher pH is crucial to intercalating larger amounts of C16TMA cations and, hence, to improving the exfoliation of the silicate sheets. Magic-angle spinning 13C nuclear magnetic resonance spectroscopy indicates that the intercalated surfactants exhibit a significant degree of gauche conformation. According to in situ powder X-ray diffraction, an increase of the basal spacing to 4.08 nm is observed at intermediate temperatures of 50 to 150°C for organoclay with an initial basal spacing of 3.7 nm. At higher temperatures, decomposition of the surfactant occurs and the basal spacing decreases to ~1.4 nm.

Organoclays are sorbent materials prepared from clays by exchanging inorganic with organic cations. Their properties depend on the loading and conformational structure of the organic cations, but little information is available about the surface structures of organoclays. In this work, X-ray photoelectron spectroscopy (XPS) and classical molecular dynamics (MD) simulations are combined to characterize the external interface of an organoclay prepared from hexadecylpyridinium (HDPy+) and bentonite. The XPS survey spectra show well the varying elemental composition of the surface with increasing amount of surfactant, showing a decreasing contribution of clay-derived elements with increasing organic coverage. The high-resolution C 1s XPS spectra depict sensitively the surface arrangement of the surfactant. In combination with MD simulations, the results implied a monolayer coating for low surfactant coverage and a disordered bilayer arrangement at high surfactant uptakes. Molecular dynamics simulations showed that for very high cation uptake a quasi-paraffin-like configuration is also possible. The combination of experimental and modelling methods yielded congruent information on the molecular-scale arrangement of organic cations at the organoclay surfaces and the controlling mechanisms.

The use of Mg-montmorillonite in the production of organoclay without sodium activation was investigated. For this purpose, organophilization experiments were carried out by varying the concentration of two surfactants: hexadecyltrimethylammonium (HDTMA+) and dodecyltrimethylammonium (DTMA+) ions. These surfactantswere used at concentrations 0.7, 1.0 and 1.5 times that of the cation exchange capacity (62.6 meq/100 g) of the clay, with a reaction time of 8 h at temperatures of 25 and 80°C. X-ray diffraction (XRD) results confirmed the intercalation for both in natura and activated samples. The Fourier-transforminfrared (FTIR) spectroscopy and XRD results showed that the ratio of gauche/trans conformers decreased with increased basal spacing. The results of thermodifferential and thermogravimetric analysis (DTA/DTG) confirmed the thermal stability of the organoclay up to 200°C, permitting the use of suchmaterial in the synthesis of polymer/clay nanocomposites obtained by the melt blending. Thus, Mg-montmorillonite can be intercalated with alkylammonium ions without prior Na-activation to form organoclays. The possibility of using natural (non-activated) Mg-montmorillonite represents a significant difference in terms of processing cost in comparison with existing Ca-montmorillonite in Brazil or even with imported bentonites that require Na-activation during beneficiation.