A method of workspace modelling for spherical parallel manipulators (SPMs) of symmetrical architecture is developed by virtue of Euler parameters in the paper. The adoption of Euler parameters in the expression of spatial rotations of SPMs helps not only to eliminate the possible singularity in the rotation matrix, but also to formulate all equations in polynomials, which are more easily manipulated. Moreover, a homogeneous workspace can be obtained with Euler parameters for the SPMs, which facilitates the evaluation of dexterity. In this work, the problem of workspace modelling and analysis is formulated in terms of Euler parameters. An equation dealing with boundary surfaces is derived and branches of boundary surface are identified. Evaluation of dexterity is explored to quantitatively describe the capability of a manipulator to attain orientations. The singularity identification is also addressed. Examples are included to demonstrate the application of the proposed method.

Computing a realistic velocity profile for a mobile robot is a challenging task due to the large number of kinematic and dynamic constraints involved. In order for a mobile robot to complete its task it must be able to plan and follow a trajectory. It may also be necessary to follow a given velocity profile, depending on the environment. Temporal planning, or following a given velocity profile, can be used to minimize time of motion and to avoid moving obstacles. For example, assuming the mobile robot is a smart wheelchair, it must follow a prescribed path while following a strict speed limit. This paper presents a temporal planning algorithm that is implemented on a wheeled mobile robot to be used in an indoor setting, such as a hospital ward. The path planning stage is accomplished by using cubic spline functions. A trajectory is created by assigning an arbitrary time of 1 s to each segment of the path. This trajectory is made feasible by applying a number of constraints and using a linear scaling technique. When a velocity profile is given, a non-linear time scaling technique is used to fit the mobile robot's linear velocity to the given velocity profile. A method for avoiding moving obstacles is also implemented. Simulation and experimental results showed good agreement with each other. The main contribution of this paper is in developing a temporal planning algorithm, which is capable of moving on an uneven surface (graded non-flat), and its implementation on the mobile robot at the robotics lab in the University of Saskatchewan. This algorithm is computationally very efficient as it requires low computation cost and does not involve major iterations.

This paper demonstrates how numerical optimization techniques can efficiently be used to create self-stable running motions for a human-like robot model. Exploitation of self-stability is considered to be a crucial factor for biological running and might be the key for success to make bipedal and humanoid robots run in the future. We investigate a two-dimensional simulation model of running with nine bodies (trunk, thighs, shanks, feet, and arms) powered by external moments at all internal joints. Using efficient optimal control techniques and stability optimization, we were able to determine model parameters and actuator inputs that lead to fully open-loop stable running motions.

Sliding mode observer is a variable structure system where the dynamics of a nonlinear system is altered via application of a high-frequency switching control. This paper presents a non-linear sliding mode observer for wheel linear slip and slip angle estimation of a single wheel based on its kinematic model and velocity measurements with added noise to simulate actual on-board sensor measurements. Lyapunov stability theory is used to establish the stability conditions for the observer. It is shown that the observer will converge in a finite time, provided the observer gains satisfy constraints based on a stability analysis. To validate the observer, linear and two-dimensional (2D) test rigs are specially designed. The sliding mode observer is tested under a variety of conditions and it is shown that the sliding mode observer can estimate wheel slip and slip angle to a high accuracy. It is also shown that the sliding mode observer can accurately predict wheel slip and slip angle in the presence of noise, by testing the performance of the sliding mode observer after adding white noise to the measurements. An extended Kalman filter is also developed for comparison purposes. The sliding mode observer is better in terms of prediction accuracy.

Mobile robots in field environment travel not only on even terrain but also on uneven or sloped terrain. Practical methods for preventing turnover of the mobile robot are essential since the turnover of the mobile robot is very perilous. This paper proposes an efficient algorithm for preventing turnover of a mobile robot on uneven terrain by controlling linear acceleration and rotational velocity of the mobile robot. The concept of the modified zero moment point (ZMP) is proposed for evaluating the potential turnover of the mobile robot. Also, the turnover stability indices for linear acceleration and rotational velocity are defined with the modified ZMP. The turnover stability space (TSS) with turnover stability indices is presented to control the mobile robot in order to avoid turnover effectively. Finally, the feasibility and effectiveness of the proposed algorithm are verified through simulations conducted on a three-wheeled mobile robot.

The paper describes the kinematic analysis of a new translational parallel manipulator (TPM). The manipulator consists of a fixed base, with a moving platform connected to the base by three identical legs with PUPR chains. The axes of the actuated motions are orthogonal. This configuration provides a very simplified kinematic analysis with fully decoupled input–output linear equations, absence of translational singularities, isotropy and ease of determining the workspace for the moving platform.

This paper presents an adaptive actuator failure compensation method, which compensates for uncertainties due to unknown actuator failures for redundant manipulator systems. The method is first developed for manipulators whose joints are concurrently actuated. While physical realization of concurrently actuated manipulators and the advantages of their use have been understood before, in this paper failure modeling, controller structure, and adaptive update rules for handling uncertainties from the actuator failures are studied. The adaptive actuator failure compensation method is then expanded for a cooperating multiple manipulator system with uncertain actuator failures. Dynamic equations of such a multiple manipulator system in the task space are derived and the adaptive actuator failure compensation problem is formulated in the task space, for which a compensation controller structure is proposed with stable adaptive parameter update laws. The adaptive control scheme is able to compensate for the uncertainties of system parameters and actuator failures in a more general sense. For both cases, closed-loop system stability and asymptotic tracking are proved, despite uncertain system failures.

Mobile robots are used to operate in urban environments, for surveillance, reconnaissance, and inspection, as well as for military operations and in hazardous environments. Some are intended for exploration of only natural terrains, but others also for artificial environments, including stairways. This paper presents a mobile robot design that achieves autonomous climbing and descending of stairs. The robot uses sensors and embedded intelligence to achieve the task. The robot is a reconfigurable tracked mobile robot that has the ability to traverse obstacles by changing its track configuration. Algorithms have been further developed for conditions under which the mobile robot would halt its motion during the climbing process when at risk of flipping over. Technical problems related to the implementation of some of the robot functional attributes are presented, and proposed solutions are validated and experimentally tested. The experiments illustrate the effectiveness of the proposed approach to autonomous climbing and descending of stairs.

In this paper, the robust robot localization problem with respect to uncertainties on environment features is formulated in a stochastic setting, and an extended Kalman filtering approach is proposed for the integration of odometric, video camera, and sonar measures. The environment is supposed to be only partially known, and a probabilistic method for sensor data fusion aimed at increasing the environment knowledge is considered.

In this paper, two adaptive proportional-derivative (PD) control laws are proposed for autonomous underwater vehicle (AUV). The proposed adaptive controllers require only model of gravity and buoyancy regressor matrix and do not need any knowledge of inertia matrix, Coriolis and centripetal force, hydrodynamic damping, and the parameters of the gravity and buoyancy force. Hence, the proposed controllers have the advantages of simplicity and ease of implementation. We shall also prove that the setpoint controller is a special case of the region reaching controller when a desired region is reduced to a point. Furthermore, the inverse Jacobian matrix is not required in the control laws. Lyapunov-like functions are proposed for the stability analysis. Simulations are presented to demonstrate the effectiveness of the proposed controllers.

This paper presents a novel microstep control approach for improving the positioning precision of a millimeter-sized omni-directional mobile microrobot. The microrobot that is designed for microassembly in a microfactory is driven by three electromagnetic micromotors. The structures of both the microrobot and the micromotor are described in the paper. The torque vectors synthesis method (TVSM) is developed and the torque self-balance principle (TSBP) is employed to realize the microstep control. The control circuit that needs a complex digital logic is devised with a complex programmable logic device (CPLD). The experiments using a hard disk and the real microrobot demonstrated the validity and performance of TVSM and TSBP. And the angular step precision of the microrobot is increased by three times compared to the normal control.

This paper proposes an approach for solving the velocity and acceleration of the limited-dof (dof n < 6) parallel kinematic machines with linear active legs by means of translational/rotational Jacobian and Hessian matrices. First, based on the established or derived constraint and displacement equations, the translational/rotational Jacobian and Hessian matrices are derived. Second, the formulae for solving inverse/forward velocities and accelerations are derived from translational and rotational Jacobian/Hessian matrices. Third, a 2SPR + UPU PKM and a 2SPS + RPRR PKM are illustrated for explaining how to use this method. This approach is simple because it needs neither to eliminate 6-n rows of an n × 6 Jacobian matrix nor to determine the screw or pose of the constrained wrench.

The Stewart platform manipulator is a fully kinematic linkage system that has major mechanical differences from typical serial link robots. It is a six-axis parallel robot manipulator with a high force-to-weight ratio and good positioning accuracy that exceeds that of a conventional serial link robot arm. This study examines the dynamic equations and control methodology for a Stewart platform. Because manual symbolic expansion of Stewart platform robot dynamic equations is tedious, time-consuming, and prone to errors, an automated derivation process is highly desired. The main goal of this work is to present an efficient procedure for computer generation of dynamic equations for a Stewart platform manipulator. As MATLAB has a powerful signal processing toolbox along with symbolic processing capabilities and is widely used as a common technical computing environment in many universities and research laboratories, the objective of this study was to develop a MATLAB-based approach for symbolic computation for a parallel linked robot. Additionally, a computed-torque control methodology is utilized for such a structure. Simulation results demonstrate the effectiveness of the proposed control methodology.

This paper deals with the problem of collision course checking in a dynamic environment for mobile robotics applications. Our method is based on the relative kinematic equations between moving objects. These kinematic equations are written under polar form. A transformation of coordinates is derived. Under this transformation, collision between two moving objects is reduced to collision between a stationary object and a virtual moving object. In addition to the direct collision course, we define the indirect collision course, which is more critical and difficult to detect. Under this formulation, the collision course problem is simplified, and complex scenarios are reduced to simple scenarios. In three-dimensional (3D) settings, the working space is decomposed into two planes: the horizontal plane and the vertical plane. The collision course detection in 3D is studied in the vertical and horizontal planes using 2D techniques. This formulation brings important simplifications to the collision course detection problem even in the most critical and difficult scenarios. An extensive simulation is used to illustrate the method in 2D and 3D working spaces.

A path planning algorithm for a spherical mobile robot rolling on a plane is presented in this paper. The robot is actuated by two internal rotors that are fixed to the shafts of two motors. These are in turn mounted on the spherical shell in mutually orthogonal directions. The system is nonholonomic due to the nonintegrable nature of the rolling constraints. Further, the system cannot be converted into a chained form, and neither is it nilpotent nor differentially flat. So existing techniques of nonholonomic path planning cannot be applied directly to the system. The approach presented here uses simple geometrical notions and provides numerically efficient and intuitive solutions. We also present the dynamic model and derive motor torques for execution of the algorithm. Along the proposed paths, we achieve dynamic decoupling of the variables making the algorithm more suitable for practical applications.

In this paper, a novel spherical parallel manipulator and its isotropic design is introduced. This manipulator has good accuracy and relatively a larger workspace which is free of singularities. Utilizing spherical configuration the forward position problem is solved by equivalent angle–axis representation and Bezout's method which leads to a polynomial of degree 8. Two examples are given, one for isotropic and one for nonisotrpoic design. The first case results in eight real solutions, therefore, the polynomial being minimal. Using invariant form, we study acceleration analysis, conditions for singularity and find infinite isotropic structures. Accuracy and workspace analysis are also performed and are shown to have good global conditioning index and relatively large workspace. Using isotropic design and singularity requirements, we show the workspace of isotropic design is free of singularity.

The aim of this paper is to determine the optimal trajectory and maximum payload of flexible link manipulators in point-to-point motion. The method starts with deriving the dynamic equations of flexible manipulators using combined Euler–Lagrange formulation and assumed modes method. Then the trajectory planning problem is defined as a general form of optimal control problem. The computational methods to solve this problem are classified as indirect and direct techniques. This work is based on the indirect solution of open-loop optimal control problem. Because of the offline nature of the method, many difficulties like system nonlinearities and all types of constraints can be catered for and implemented easily. By using the Pontryagin's minimum principle, the obtained optimality conditions lead to a standard form of a two-point boundary value problem solved by the available command in MATLAB®. In order to determine the optimal trajectory a computational algorithm is presented for a known payload and the other one is then developed to find the maximum payload trajectory. The optimal trajectory and corresponding input control obtained from this method can be used as a reference signal and feedforward command in control structure of flexible manipulators. In order to clarify the method, derivation of the equations for a planar two-link manipulator is presented in detail. A number of simulation tests are performed and optimal paths with minimum effort, minimum effort-speed, maximum payload, and minimum vibration are obtained. The obtained results illustrate the power and efficiency of the method to solve the different path planning problems and overcome the high nonlinearity nature of the problems.

A new approach for navigation of mobile robots in dynamic environments by using Linear Algebra Theory, Numerical Methods, and a modification of the Force Field Method is presented in this paper. The controller design is based on the dynamic model of a unicycle-like nonholonomic mobile robot. Previous studies very often ignore the dynamics of mobile robots and suffer from algorithmic singularities. Simulation and experimentation results confirm the feasibility and the effectiveness of the proposed controller and the advantages of the dynamic model use. By using this new strategy, the robot is able to adapt its behavior at the available knowing level and it can navigate in a safe way, minimizing the tracking error.

In this paper, the optimization of architectural parameters for a class of translational parallel kinematic machine (PKM) is performed with the particle swarm optimization (PSO) to achieve the best accuracy characteristics. The conventional error transformation matrix (ETM) is derived based on the differentiation of kinematic equations, and a new error amplification index (EAI) over a usable workspace is proposed as an error performance index for the optimization. To validate the efficiency of the PSO method, both the traditional direct search method and the genetic algorithm (GA) are implemented as well. The simulation results not only show the advantages of PSO method for the architectural optimization, but also reveal the necessity to introduce the EAI for the optimal design. And the results are valuable for architectural design of the PKM for machine tool applications.

We have made a systematic study of the gait of a straight leg planar passive walking model through simulations and experiments. Three normalised parameters, which represent the foot radius, the position of the mass centre and the moment of inertia, are used to characterise the walking model.

In the simulation, we have obtained the fixed points and the basins of attraction of the walking models with different parameter combinations by the aid of the cell mapping method. With the results of fixed points, we investigated the effects of parameter variations on the gait descriptors, including step length, period, average speed and energy inefficiency. A model that has a large basin of attraction has been obtained, and it can start walking far from its fixed point. However, the size of the basin of attraction is not a good measurement of robustness. Thus, we proposed floors with random slope angles or stairs with random heights to test robustness. Five hundred times of simulations with 100 non-dimensional time units were implemented for each parameter combination. The times that the walker failed to arrive at the end were recorded. The simulation results showed that the model with a larger foot radius and higher position of mass centre has a lower possibility of falling on uneven floors. A large moment of inertia is helpful for walking on a random slope angle floor, while low values of moment of inertia are good for navigating random stairs.

Prototype experiments have validated the simulation results, which showed that models with larger feet have a longer step length and high speed. However, period differences were difficult to obtain in the experiments since the differences were very small. We have tested the sensitivity with the initial conditions of the models with different foot radii on a flat floor, and have also tested the robustness of the models on a floor with random slope angles. The times that the model reached the end of the floor were recorded. The experimental results showed that a large foot radius is good for improving the basin of attraction and robustness on uneven floors. Finally, the exceptions of the experiment are explained.