In regard to work-space controller design, a derivation of the relationships between the operational approach and the decoupling method is introduced. The given generating rules, which are valid for nonredundant robots, permit the design of a Position-Speed-Acceleration controller or hybrid Force-PSA controllers.

This paper describes the Robotics and Intelligent Systems Program (RISP) at the Oak Ridge National Laboratory (ORNL). RISP is a focal point at ORNL for studies in robotics, teleoperations, and related aspects of intelligent machines, such as artificial intelligence, neural networks, and parallel computing. RISP research is intended to minimize human error through automation of repetitive, dull, and routine tasks; to minimize human risk by allowing effective remote operation in hazardous environments; to optimize cooperation of humans and machines; and to cope effectively with emergency situations where fast response is essential.

Fluid power is one of the vast fields and its applications in manufacturing are not used for many real-time problems though its capabilities are known. One such application is fluid power for robotic systems. More specifically, in this study, a new hydraulic system is developed for use in actuating a robotic gripper. Electric motors were found unsatisfactory due to their poor power to weight ratio. Hydraulics were attempted using a master slave hydraulic system. Powering and positioning was done on the master cylinder, while the remote slave cylinder followed the motion. The control of the master cylinder was done with a ground based stepping motor and lead screw mechanism. Small hoses ran to the gripper based slave cylinder, which copied the motions.

A redundant robot manipulator has several certain or expected advantages over a nonredundant one. It is expected, among other capabilities, that the joints vary with constant velocities during the execution of those tasks which in a nonredundant manipulator require variable joint velocities. In this way, motion becomes more precise because of the elimination of errors associated with velocity change in joints. In this paper, it is shown that this expected advantage is not possible for all the joints, and that only as many joints as the degree of redundancy can have constant velocities.

Automated methods are developed to classify a robot's kinematic type and select an appropriate library inverse-kinematic solution based on this classification. These methods automatically generate DenavitHartenberg joint frame parameters, given any frame representation that can mathematically be represented as a homogeneous transformation.

To reduce the number of closed-form inverse-kinematics solutions required for a broad class of serial robots, additional methods account for differences in robot zero state, base frame location, and joint polarity. Further generalization results from using joint frame decoupling to map lower degree-of-freedom robots into the inverse-kinematics solutions of higher degree-offreedom robots.

With the recent advances of VLSI technology, it has become possible to realize parallel architectures for image processing which are more efficient than the customary sequential processors. The paper discusses general architectural requirements for parallel processing and then the existing systems architectures. This is followed by a description of VLSI devices for image processing in three examples. The paper emphasizes VLSI architectures for image feature extraction, classification and structure (syntax) analysis.

The description is provided for the design and implementation of a system capable of simulating the motions of a quadruped walking robot. The system aims to investigate the feasibility of the robot's walking cycle. This is achieved by considering the robot's stability and more specifically the position of its centre of gravity in relation to its supporting legs. The robot is modelled as a solid body connected to four jointed limbs which are moved through a series of gaits, their positions being calculated at a set of discrete intervals. The resulting information is displayed using a graphical module to present an image of the moving robot and indicate its centre of gravity and support pattern. The complete system indicates the stability of the robot throughout a user-defined gait cycle and is both portable and adaptable.

The system is implemented on a HLH Orion and an Atari 1040ST in the C programming language and is aimed at providing support for the Department of Mechanical Engineering at Edinburgh University where the particular robot is being built.

Structural and control flexibilities affect the absolute precision of serial manipulators. A semi-flexible kinematic model is developed, to improve the absolute static precision. It expands the solid body model by incorporating a spring effect for each joint and a beam effect for each link. The identifiability of the added parameters and the effect of measurement noise are explored on a R4 robot. It requires efforts and pose errors to be known in the tool frame only. Simulation results show that identification of some of the parameters is sensitive to measurement noise on forces and pose. In fact, joint flexibility displacement and beam flexion that occur in the same plane are difficult to dissociate in noisy condition. However, a subset of the original parameters can be defined leading to a model that can be more accurately identified when measurement noise is present. In simulation, precompensation is used in an inverse semi-flexible model that results in a 98% decrease of pose error compared to the rigid body inverse geometric model.

The dynamics of sensors operated devices such as Automated Mobile Robots and more generally automated target seeking devices is studied in presence of noise. We introduce a simple and analytically tractable class of dynamics which permits to classify qualitatively and somehow quantitatively also the approach to the targets when fluctuations corrupt the ideal trajectories. Our model constitute a first evaluation of the feasibility of an efficient approach when the parameters of the model (statistics of the noise, lengths of the path and progressing steps and heading velocity) are known.

The Space Station Alpha is the most significant international space project of this century and the largest international technology development project ever undertaken. The space robot manipulators will be a substantial part of the space station and will perform tasks such as assembly as well as maintenance of the station. Therefore the robot manipulators need a very sophisticated real-time control capability for gross and fine motions (i.e. compliant motions) during various operations. Moreover, the proposed dual-arm robot system servicing the Space Station requires automated motion coordination, synchronization of the arms, and controlled mechanical interaction with fixed and moving objects involved in various tasks.

A complication to the process of remotely generating tool paths is that mechanism controllers are typically capable of commanding a robot or machine tool to move along linear and circular arc space segments. This paper considers the decomposition of parametrically described, higher-order curvilinear paths into piecewise linear and circular path segments, thereby reducing the data required to store a higher order path.

Recent hardware advances for robot accessories include self changing grippers. A universal wrist has the capability of accessing and pneumatically attaching itself to a limited number of grippers that can be stored in a magazine. This paper addresses the determination of self changing gripper characteristics to permit the grasping of a wide variety of geometric shapes with a limited number of different gripper types.

In order to solve the problem of the insufficient adaptability of the current small- and medium-sized casting sorting robot gripper, we have designed a casting sorting robot bionic gripper with rigid–flexible coupling structures based on the robot topology theory. The second-order Yeoh model was used to statically model the clamping belt in the gripper to derive the relationship between the external input air pressure and the bending angle of the driving layer, and the feasibility of multiangle bending of the driving layer was verified by finite element analysis. The maximum gripping diameter of the gripper is 140 mm, and in order to test the adaptive gripping ability of the gripper, a prototype of the casting sorting robot gripper is prepared, and the pneumatic control system and human–machine interface of the gripper are designed. After several experimental analyses, the designed casting sorting robot gripper is characterized by strong adaptability and high robustness, with a maximum load capacity of 930 g and a maximum wrap angle of 296°, which can complete the gripping operation within 1 s, and the comprehensive gripping success rate reaches 96.4%. The casting sorting robot gripper designed in the paper can provide a reference for the design and optimization of various types of shaped workpiece gripping manipulators.

This work investigates the use of a fuzzy logic controller (FLC) for two-wheeled differential drive mobile robot trajectory tracking control. Due to the inherent complexity associated with tuning the membership functions of an FLC, this work employs a particle swarm optimization algorithm to optimize the parameters of these functions. In order to automate and reduce the number of rule bases, the genetic algorithm is also employed for this study. The effectiveness of the proposed approach is validated through MATLAB simulations involving diverse path tracking scenarios. The performance of the FLC is compared against established controllers, including minimum norm solution, closed-loop inverse kinematics, and Jacobian transpose-based controllers. The results demonstrate that the FLC offers accurate trajectory tracking with reduced root mean square error and controller effort. An experimental, hardware-based investigation is also performed for further verification of the proposed system. In addition, the simulation is conducted for various paths in the presence of noise in order to assess the proposed controller’s robustness. The proposed method is resilient against noise and disturbances, according to the simulation outcomes.

The paper presents the control architecture of a crawler mobile robot designed and developed to sample potentially contaminated lands. The robot, developed in the framework of an Italian national project named ROBILAUT, carries a driller with a customized sampling mechanism to implement on-site the required quartering, and it is controlled to move the drilling device on specific points acquired in real time before the mission starts. The paper describes the software architecture for the navigation and control, focusing on the control framework of the robotic platform. Specifically, the robot exhibits a differential drive kinematics with actuators’ constraints, and two different control strategies have been experimentally tested for comparison both in a structured environment and in the real site in May 2023.

This paper presents a climbing robot (CR) designed for the purpose of pipeline maintenance, with capability to avoid the risks inherent in manual operations. In the design process, a three degree of freedom (DOF) parallel mechanism coupled with a remote center of motion (RCM) mechanism linkage mechanism were designed to serve as the CR’s climbing mechanism, which met the specific demands for climbing movements. The modified Kutzbach–Grübler formula and the screw theory were applied to calculate the DOFs of the CR. Then, the inverse and forward position analysis for the CR was derived. Furthermore, velocity and acceleration analysis of parallel mechanism were conducted and derived the Jacobian matrix, through which the singularity of parallel mechanism was analyzed. In order to evaluate kinematic performance of parallel mechanism, the motion/force transmission index (LTI) of workspace was calculated, which directed the followed dimensional optimization process. According to the optimization result, a prototype was constructed and a series of motion experiments were carried out to validate its climbing capability.