Stable carbon isotope ratios and radiocarbon (14C) concentrations in samples of pine wood (AD 1975–2012) from 3 sites, as well as needles (AD 2012–2014) collected from 15 sites, in a heavily urbanized area in proximity to heavy industrial factories in Poland were analyzed as bio-indicators of CO2 emissions. The sampling sites were located at different distances from point sources. The stable isotopic composition was determined using an isotope ratio mass spectrometer, and the 14C concentration was determined using a liquid scintillation counter and an accelerator mass spectrometer. Spatial and temporal variability of δ13C and Δ14C in tree ring cellulose and needles was noted in all regions. A negative correlation between δ13C tree ring cellulose and anthropogenic CO2 emissions has been observed. The ratio of δ13C in tree ring cellulose to δ13C in needles created in the same year is equal to 1.2 at the investigated sites.

Organic carbon (OC) radiocarbon (14C) signatures in marine surface sediments are highly variable and the causes of this heterogeneity remain ambiguous. Here, we present results from a detailed 14C-based investigation of an Arabian Sea sediment, including measurements on organic matter (OM) in bulk sediment, specific grain size fractions, and OC decomposition products from ramped-pyrolysis-oxidation (RPO). Our results show that 14C ages of OM increase with increasing grain size, suggesting that grain size is an important factor controlling the 14C heterogeneity in marine sediments. Analysis of RPO decomposition products from different grain size fractions reveals an overall increase in age of corresponding thermal fractions from finer to coarser fractions. We suggest that hydrodynamic properties of sediment grains exert the important control on the 14C age distribution of OM among grain size fractions. We propose a conceptual model to account for this dimensionality in 14C variability that invokes two predominant modes of OM preservation within different grain size fractions of Arabian Sea sediment: finer (<63 µm) fractions are influenced by OM-mineral grain aggregation processes, giving rise to relatively uniform 14C ages, whereas OM preserved in coarser (>63 µm) fractions includes materials encapsulated within microfossils and/or entrained fossil (14C-depleted) OC hosted in detrital mineral grains. Our findings highlight the value of RPO for assessment of 14C age variability in sedimentary OC, and for assessing mechanisms of OM preservation in aquatic sediments.

The biocomponent ratio in liquid fuels as well as the usage of renewable resources for fuel consumption in the transport sector needs to be increased as a result of EU directive 2003/30/EC. Based on radiocarbon (14C) measurements, it should be relatively simple and fast to measure the weight percentage of the fossil and biological sources by accelerator mass spectrometry (AMS) as recommended in the ASTM D 6866-12 and EN 16640 standards. In this study, a relatively easy and fast sample preparation and measurement method based on AMS measurements was developed at the Hertelendi Laboratory of Environmental Studies (HEKAL) using reference samples from the Hungarian MOL Nyrt. oil company. Considering the recent EU regulation for mixing rates of liquid fuels in the transport sector (0.7–2% biofuel content) and the projected higher rates (2–10% biofuel content), the method is applicable to determine fatty acid methyl ester (FAME) and/or hydrotreated vegetable oil (HVO) derived proportions of fuel blends with a 1σ uncertainty better than±0.3% m/m.

In this manuscript, I present an estimation of the rate of decline in atmospheric radiocarbon and the amplitude of its seasonal cycle for the past four decades for the northern and southern hemispheres, and forecast the time required to reach pre-1950 levels (i.e. Δ14C<0‰). Using a set of 30 different exponential smoothing state-space models, the time series were decomposed into their error, trend, and seasonal components, choosing the model that best represented the observed data. According to the best model, the rate of change in Δ14C has decreased considerably since the 1970s and reached values below −5‰ per year since 2005. Overall, the time-series showed larger rates of radiocarbon decline in the northern than in the southern hemisphere, and relatively stable seasonal cycles for both hemispheres. A forecast of the exponential smoothing models predicts that radiocarbon values will reach pre-1950 levels by 2021 in the northern hemisphere with 20% probability, and by around 2035 in the southern hemisphere. However, at regional levels radiocarbon concentrations have already reached pre-1950 levels in several industrialized regions and cities around the world as a consequence of fossil-fuel emissions.

The determination of the proportion between the biogenic and the fossil-derived fraction in carbon dioxide emissions from industrial stationary sources is a relevant aspect in the frame of the worldwide efforts to reduce greenhouse gas emissions into the atmosphere. In this field the 14C-based method has gained importance over the years and has been included in standard protocols accepted at both the national and international levels. The advantages of the method, based on the large difference in terms of 14C signature between fossil and biogenic carbon, are reviewed as well as some critical aspects related to its application. In particular the results of a study aimed at validating the method by analyzing synthetic gas mixtures produced in a dedicated plant and with a tuneable proportion between fossil and biogenic carbon dioxide are presented.

The freshwater reservoir effect (FRE) for the Schelde basin (Belgium) is assessed for the Roman, Medieval and early Post-medieval periods by comparing historical and archaeological dates from individual archaeological deposits with radiocarbon dates on the remains of freshwater fish and terrestrial mammals from those same deposits. This is the first time such an assessment has been attempted for the Schelde basin. The FRE offsets prove to be substantial for the historical periods considered. They also differ markedly between fish species and between size classes of a single species. These observations have implications for the evaluation of radiocarbon dates obtained on archaeological remains of humans (and animals) with a substantial amount of freshwater fish into their diet. The data obtained in this study suggest that it will not be easy to correct for any FRE.

The release and the speciation of carbon species from irradiated JRQ carbon steel samples, representative of the reactor pressure vessel of Belgian nuclear power plants, were studied in a saturated portlandite aqueous solution, relevant for the Belgian Supercontainer design, as perceived for the geological disposal of high-level nuclear waste. To achieve this, we performed simple immersion and potentiostatic corrosion tests. In addition, the corrosion rate (which determines the 14C release) was estimated by measuring the release of 60Co. Gas chromatography showed that during the static corrosion test, the carbonaceous species methane, carbon dioxide, ethene, and ethane were produced. Under the hypothesis that all the carbon released from the JRQ steel was transformed into carbon-base gaseous compounds, this corresponds to a corrosion rate of approximately 100 nm/yr, which is in good agreement with literature data.

An excavation carried out at the megalithic necropolis of Panoria in 2015 offered an excellent opportunity for dating a widespread variety of polygonal, rectangular, and trapezoidal-shaped tombs with short passages for which, surprisingly, there were previously no known radiocarbon (14C) measurements available. Based on the anthropological remains, a series of 19 14C dates was obtained and modeled in a Bayesian statistical framework. The results stress a long period of use that began in the Late Neolithic (3525–3195 cal BC), reaching the most intensive ritual activity during the Copper Age and ending in the Early Bronze Age (2125–1980 cal BC). Throughout this period, tombs were built at different times and used at different temporal scales and intensities, ranging from a few decades to centuries.

Inland water bodies contain significant amounts of carbon in the form of dissolved inorganic carbon (DIC) derived from a mixture of modern atmospheric and pre-aged sources, which needs to be considered in radiocarbon-based dating and natural isotope tracer studies. While reservoir effects in hardwater lakes are generally considered to be constant through time, a comparison of recent and historical DI14C data from 2013 and 1969 for Lake Constance reveals that this is not a valid assumption. We hypothesize that changes in atmospheric carbon contributions to lake water DIC have taken place due to anthropogenically forced eutrophication in the 20th century. A return to more oligotrophic conditions in the lake led to reoxygenation and enhanced terrigenous organic matter remineralization, contributing to lake water DIC. Such comparisons using DI14C measurements from different points in time enable nonlinear changes in lake water DIC source and signature to be disentangled from concurrent anthropogenically induced changes in atmospheric 14C. In the future, coeval changes in lake dynamics due to climate change are expected to further perturb these balances. Depending on the scenario, Lake Constance DI14C is projected to decrease from the 2013 measured value of 0.856 Fm to 0.54–0.62 Fm by the end of the century.

The “governor’s residency” at Tel ‘Eton was destroyed in the late 8th century BCE in an Assyrian military campaign. While the numerous finds enable a detailed reconstruction of life on the eve of the destruction, this elite house was cleaned continuously, and since no floor raisings were identified, little was known of the building’s period of use. Radiocarbon (14C) samples taken from within a foundation deposit and from the floor make-up, however, indicate that the earliest phase of the residency was built in the late 11th–10th century BCE. This has bearings on the date in which social complexity evolved in Judah, on the debate regarding the historicity of the kingdom of David and Solomon, and it also provides the earliest date for the use of ashlar stones in Judah. Finally, the long life of the “governor’s residency” exemplifies a little addressed phenomenon—the old-house effect—in which buildings and settlements existed for a few centuries, but only left significant remains from their last phase. The earlier phases are hardly represented in the finds, barely studied, and rarely published. We suggest that the old-house effect influences archaeological interpretations world-wide, and is also responsible for recent attempts to down-date social complexity in Judah.

We present radiocarbon (14C) in tree rings from Mexico City and a reconstruction of fossil CO2 concentrations for the last five decades, as part of a research program to understand the 14C dynamics in this complex urban area. Background values were established by 14C concentrations in tree rings from a nearby clean area. Agreement between background and NH-zone 2 values indicate Taxodium mucronatum is a good biomonitor for annual atmospheric 14C variations. Values for the urban tree rings were significantly lower than background values, indicating a 14C depletion from fossil CO2 emissions. There is an increasing trend of fossil CO2 between 1960 and 1990, in agreement with the population growth and the increasing demand for fossil fuels in Mexico City. Between 1990 and 2000, there is an apparent decrease in fossil CO2 concentration, increasing again after 2000. The decrease in 2000, despite being of the same magnitude as the overall uncertainty, may reflect environmental policies that improved the energy efficiency and reduced CO2 emissions in the area. The increase in fossil CO2 concentration between 2000 and 2010 may be attributable to the significant growth of motor vehicle usage in Mexico City, which made transportation the main energy-demanding and -emitting sector.

Recent advancements in accelerator mass spectroscopic (AMS) radiocarbon (14C) analytical methods and instrumentation offer us reliable conventional 14C ages with highly reduced analytical uncertainty for archeological bone collagen. However, after calibration this may be still too high for archeologists in periods where archeochronology is capable of attaining a resolution of 25–30 yr. Furthermore, there are cases when wiggles in the calibration curve yield wider age ranges than initially expected. For the Avar Age in the Carpathian Basin (568 to early 9th century AD) reliable archeotypochronology is available for the 7th century AD alone. The date of Avar invasion (568 AD) is precisely known. Precise archeological dating for the late 6th and the 9th centuries is lacking, calling for other methods to be introduced. This paper reports the first 14C dates for an Early Avar Age cemetery, Makó-Mikócsa. According to archeotypochronology, the cemetery was in use for three generations until the mid-7th century AD. The imprecision in 14C chronology arising from wiggles in the IntCal13 curve was significantly reduced by relative stratigraphy-controlled Bayesian modeling. Introduction of further age constraints from archeotypochronology into the model reduces broad absolute age ranges providing more constraint ages.

CH4 and CO2 emissions from geologic sources, which are devoid of radiocarbon (14C), dilute the atmospheric 14C/C ratio. Observations of 14C/C can be used to estimate fossil fuel-derived CH4 and CO2. However, the atmospheric 14C/C ratio is perturbed by emissions of 14C from nuclear power plants (NPPs) and fuel reprocessing sites, which may affect such 14C/C-based estimation if they are not correctly quantified. We calculate NPP 14C emissions for CO2 and CH4 from 1972–2016 using standard emission factors (14C emitted per unit of power produced) and analyze trends in global and regional emissions. We use available observations of 14C emissions and power generation in Europe to assess emission factors for different reactor types, as well as potential differences related to the age or manufacturer of the NPPs. Globally, nuclear 14C emissions increase until 2005 and then decrease, mostly because of the closure of gas-cooled reactors in the United Kindom and the shutdown of light water reactors after the Fukushima nuclear accident in March 2011. Observed emission factors in Europe show strong variability, spanning values from 0.003 to 2.521 TBq/GWa for PWR and from 0.007 to 1.732 TBq/GWa for BWR reactors, suggesting more information and more sophisticated models are needed to improve estimates of 14C emissions.

The chemical form of 14C released from irradiated stainless steel is a key parameter in the safety assessment of the subsurface disposal system in Japan. In this study, to identify the chemical form of the released carbon, unirradiated stainless-steel powders, which were found to be water-atomized powders with a silicon oxide film, were immersed in NaOH and HCl solutions under low-oxygen conditions for approximately 25 days. The results showed that the main chemical forms of the carbon were colloidal carbon in the NaOH solution and colloidal carbon and formic and acetic acids in the HCl solution. Almost no hydrocarbons were detected in both solution systems. Concerning the source of the colloidal carbon and carboxylic acids, the hypothesis that carbon in the oxide layer is released is considered to be reasonable. The very small amounts of hydrocarbons generated prevented us from discussing the source of the hydrocarbons. To validate the hypothesis and obtain further information on the hydrocarbons, additional experiments are necessary. In particular, for long-term safety assessment, it is important to determine whether the colloidal carbon, carboxylic acids and hydrocarbons are continuously released during the corrosion process. Therefore, information on the temporal evolution of the carbon should be obtained.

Ten marine reservoir effect (R) values were obtained from archaeological shell-middens along the San Matías Gulf, North Patagonian Atlantic coast, Argentina. They were determined by accelerator mass spectrometry (AMS) measurements on marine shell (Mytilidae) and charcoal samples (burned, short-lived plants) derived from a common stratigraphic unit. The R values fluctuate between 205±48 and 358±56 14C yr BP from ca. 5300 to ca. 700 14C yr BP with no obvious temporal trend. Calculated ΔR values fluctuate between +30±66 and –162±48 yr during the same time span. Local factors such as restricted connection with the open sea or presence of aged carbonates do not appear to have had an influence on this effect along the gulf coastline. The mean R value obtained (266 ± 51 yr) constitutes a useful value for correcting ages in shells from abundant archaeological deposits recorded in the area since Middle Holocene times.

A new sputtering ion source has been installed at CEDAD (Centre for Dating and Diagnostics) at the University of Salento in Lecce, Italy. The installation of the new ion source, capable of accepting both solid and gas samples, required significant modifications of the existing low energy injector of the accelerator mass spectrometry (AMS) system. The new ion source is connected, through an in-house designed gas handling interface, to an elemental analyzer which combusts the samples to carbon dioxide and splits the gas into an IRMS system and also to the gas feed line of the ion source. This arrangement allows the simultaneous measurement of C, N content (in the EA), carbon and nitrogen stable isotopic ratios by IRMS and radiocarbon (14C) by AMS on samples with masses in the microgram range. The results of different tests performed to find optimal operational conditions and to improve the system performances are presented. The performances of the system as a function of the diameter of the glass capillary used to feed the source and the pressure of the gas mixture in the syringe are also presented. The achievable precision and blank levels are discussed together with the results obtained in environmental studies.

Low- and intermediate-level (L/ILW) radioactive waste produced in Switzerland consists of large amounts of 14C-containing irradiated steel. 14C will be released during the anoxic corrosion of the steel in the cementitious near field of an L/ILW repository. In this study, a corrosion experiment with irradiated steel was carried out to determine the speciation of 14C released during the corrosion process in conditions similar to those anticipated in the near field of a cement-based repository. The development of the experimental setup, including installation of the reactor and development of suitable analytical methods based on compound-specific 14C analysis with accelerator mass spectrometry (CSRA AMS) is reported. Time-dependent increase in the total content of 14C-bearing organic compounds in solution (TO14C) was determined by AMS and the main organic corrosion products that are 14C-bearing formate, acetate and lactate were identified by CSRA AMS after a pre-concentration step. The concentration of the 14C-bearing organic compounds was found to be very low (fmol to pmol 14C/L). Stable carbon compounds were identified and quantified while the source of stable carbon in the system has not yet been identified and the temporal evolution of the concentration of these carbon species is presently not understood.

An effective sealed tube combustion method was designed with an MnO2 oxidant for accelerator mass spectrometry radiocarbon (AMS 14C) measurements. Different types of materials (oxalic acid, cellulose, sucrose, wood, collagen, graphite, and humic acid) were used to test the method. A normal borosilicate glass tube was used instead of quartz and the combustion was done at 550ºC. The yield of the combustion is above 98% even in the case of the less combustible material such as graphite. The MnO2 reagent does not introduce detectable carbon contamination. The typical background is 0.29±0.20 pMC in the case of 200 µg carbon, measured as solid graphite target. With direct measurement of the CO2 by gas ion source AMS, the method is applicable up to 50 µg of carbon with an acceptable (~1 pMC) 14C background. A new type of tube cracker was developed for a quick chipless method of tube cracking and sample changing. In this way, the gas handling process takes only 5–6 min/sample.

This article is a critical review of published data from the earliest evidence of pressure knapped microblade technology from various regions in Northeast Asia (Siberia, Korea, China, Mongolia, Japan, Sakhalin, and Russian Far East), including discussions not only on published dates, but also on published artifacts (drawings and photos) relating to these assemblages. The issue concerning the geographical and chronological origin of microblade technology in Northeast Asia remains a widely debated concern, not only as new data emerge, but also due to researchers having different definitions of the term “microblade” and “microblade core”. In this case, by microblade technology, I refer to the systematic production of microblades using the pressure knapping technique. I therefore review the data in light of this defining feature and conclude that, based on the present state of research, pressure knapping microblade technology probably emerged in the Far East (China, Korea, or Japan) around 30,000–25,000 cal BP, in spite of most authors considering that microblade technology emerged in southern Siberia 40,000–35,000 years ago. In the discussion section, I argue about the potential role of obsidian in the emergence of pressure knapped microblade technology.