The new mineral yurgensonite, ideally K2SnTiO2(AsO4)2, the first natural arsenate with species-defining tin, and the continuous isomorphous series between yurgensonite and katiarsite KTiO(AsO4) are described from sublimates of the Arsenatnaya fumarole at the Second scoria cone of the Northern Breakthrough of the Great Tolbachik Fissure Eruption, Tolbachik volcano, Kamchatka, Russia. Yurgensonite and a Sn-bearing variety of katiarsite are associated closely with one another and with badalovite, pansnerite, yurmarinite, achyrophanite, arsenatrotitanite, hatertite, khrenovite, svabite, sanidine, hematite, cassiterite, rutile and aphthitalite-group sulfates. Yurgensonite occurs as sword-shaped crystals up to 0.01 mm × 0.05 mm × 1 mm or acicular to hair-like individuals up to 1 mm long, typically forming radial aggregates up to 2 mm across. It is transparent, colourless, white or pale beige, with vitreous lustre. The mineral is brittle, cleavage was not observed. Dcalc is 3.877 g cm-3. Yurgensonite is optically biaxial (–), α = 1.764(6), β = 1.780(6), γ = 1.792(6) and 2Vmeas. is large. Chemical composition (wt.%, electron-microprobe; holotype) is: Na2O 0.51, K2O 16.27, Rb2O 0.12, Al2O3 0.26, Fe2O3 4.33, SiO2 0.29, TiO2 10.17, SnO2 22.01, P2O5 0.14, V2O5 0.19, As2O5 40.20, Sb2O5 4.88, SO3 0.28, total 99.65. The empirical formula based on 10 O apfu is (K1.92Na0.09Rb0.01)Σ2.02(Sn0.81Ti0.71Fe3+0.30Sb5+0.17Al0.03)Σ2.02(As1.945Si0.03S0.02P0.01V0.01)Σ2.015O10. Yurgensonite is orthorhombic, Pna21, a = 13.2681(6), b = 6.6209(3), c = 10.8113(5) Å, V = 949.74(7) Å3 and Z = 4. The crystal structure was solved from single-crystal X-ray diffraction data, R = 5.02%. Yurgensonite belongs to the KTP-structure type. It is a Ti,Sn-ordered analogue of katiarsite. The structure contains chains of corner-linked alternating crystallographically non-equivalent octahedra M(1) and M(2). In yurgensonite, Sn4+ prevails in the M(2)O6 octahedron whereas the M(1) site is Ti4+-dominant. The new mineral is named in honour of the Russian mineralogist, geochemist and specialist in studies of ore deposits Professor Georgiy Aleksandrovich Yurgenson (born 1935).

The paper investigates trace elements and crystal-rich fluid inclusions in spodumene from rare-metal pegmatites of the Kolmozero lithium deposit in the Kola region, Russia. The main lithium mineral in the pegmatites is spodumene, which occurs in three generations, designated as Spd-I, Spd-II and Spd-III. Iron, Na and Mn are the most typical element impurities in spodumene. The Fe/Mn ratio is 7.1 in Spd-I, 12.3 in Spd-II and 13.2 in Spd-III. Spd-II contains fluid and crystal-rich fluid inclusions. The crystal-rich fluid inclusions in Spd-II originally trapped CO2-bearing aqueous fluids with dissolved alkali carbonates. The crystal-rich fluid inclusions contain zabuyelite (Li2CO3) and cristobalite (SiO2) as solid phases, which have not been reported previously from the Kolmozero rare-metal pegmatites. These minerals are assumed to have resulted from a reaction between a CO2-bearing aqueous fluid and host Spd-II and are not related to the mineral-forming system of pegmatites.

Ancient metamorphic processes are recorded by the formation of metallic-Pb nanospheres in zircon, a product of internal Pb mobilisation and thermally driven concentration. Here, metallic-Pb nanospheres formed within an ore deposit are characterised for the first time using high-angle annular dark field scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy element-distribution mapping. Exceptional examples from the migmatite-hosted Archean–Paleoproterozoic Challenger Au deposit (Central Gawler Craton, South Australia) support widespread metallic-Pb nanosphere formation in zircon from rocks experiencing granulite-facies metamorphism. We also report new trace-element associations found with metallic-Pb nanospheres and a new mode of occurrence, in which Sc ‘haloes’ form adjacent to metallic-Pb nanospheres within the crystalline zircon lattice. This differs to previously characterised examples of metallic-Pb nanospheres associated with amorphous Si-rich glasses and unidentified Al–Ti, or Fe-bearing phases. Multiple modes of metallic-Pb nanosphere occurrences and trace-element associations suggests multiple modes of formation, probably dependant on zircon composition and metamorphic conditions. Identification of metallic-Pb nanospheres in a growing range of geological settings further highlights the mobility of Pb in zircon and the importance of detailed, nanoscale mineral characterisation, in order to constrain accurate geochronological histories for rocks within high-temperature geological environments.

Fluid-inclusion studies were conducted on amethyst quartz from three different geological environments: basalt cavities; hydrothermal veins; and granitic pegmatites of Eastern Brazil, to understand the conditions of amethyst crystallisation in each of these environments. In samples from basalt cavities, fluid inclusions are exclusively one-phase aqueous types suggesting a low-temperature formation environment. Crystals from the two other environments show that fluid inclusions can be either one-phase aqueous, two-phase aqueous, three-phase aqueous carbonic, or three-phase aqueous with the presence of precipitated solid halite. The carbonic composition of the system H2O–CO2–NaCl was confirmed by Raman spectroscopic analysis and suggests a metamorphic or magmatic fluid source. Fluid inclusions trapped in samples from hydrothermal veins reveal at least two different fluid generations based on homogenisation temperatures. The first generation has minimum trapping temperatures between 249°C and 391°C. The second generation of lower temperature fluids has minimum trapping temperatures varying from 82°C to 203°C. Fluid inclusions of this group record eutectic temperatures that indicate the presence of Ca and Fe cations in addition to Na. Fluid inclusions trapped in amethyst from a pegmatite body have moderate salinity values between 15 and 25 eq. wt.% NaCl, thus reflecting the elevated salt content in pegmatite-forming fluids. In this sample, the first fluid generation is represented by aqueous fluid inclusions with minimum trapping temperatures ranging from 268°C to 375°C. The estimated eutectic temperatures, generally below –50°C, indicate the presence of Ca cations in addition to Na. Minimum trapping temperatures correspond to temperatures of late-to-post-pegmatitic hydrothermal stages. The second generation records minimum trapping temperatures between 125°C and 247°C. Amethyst from both hydrothermal veins and pegmatite environments contain solid inclusions of hematite, an indication that the mineralising fluid was Fe rich and thus, possibly magmatic in origin.

The synthesis and structure of the title compound, 1, is presented, refined using Rietveld against powder X-ray diffraction data. 1 crystallises dominantly in a pseudotetragonal C-centred orthorhombic lattice with dimensions a = 6.6791(6) Å, b = 15.5006(6) Å, c = 6.6811(6) Å and V = 691.70(10) Å3. The structural model proposed here refined by Rietveld is Sr0.928(8)Cu4(OH)8Cl2⋅3.60(21)H2O in space group Cmcm (63), with Z = 2. The chemistry and diffraction pattern of 1 are similar to that for the known Ca analogue, calumetite. The copper sites are arranged with square planar coordination at ¼ and ¾ height and are bonded to four (protonated) oxygens at an average of 1.966 Å (effective coordination of 3.82 Å). The more distant Cl sites (at Cu−Cl = 3.190(6) Å) complete the heavily Jahn–Teller distorted Cu[(OH)4,Cl2] polyhedra. The ½-occupied Sr sites are 8 coordinated to four protonated oxygens shared with the Cu-layer (at 2 × 2.438(8) Å, 2 × 2.566(15) Å) and by 4 bonds to the proposed water sites (Sr−Ow = 2.760(9) Å). The structure of 1 is predisposed towards defects, based on a notional tetragonal, P4/nmm, substructure with asub ≈ a1, csub = b½ dimensions. Average diffraction models have been further elaborated in order to resolve additional peaks (and peak-shapes) using DIFFaX+.

Aldermanite from Tom's quarry in the Kapunda–Angaston area of the Mount Lofty Ranges, South Australia has been characterised by electron microprobe analyses and single-crystal structure analysis. The empirical formula is Na0.72K0.13Ca0.06Mg1.15Al2.92(PO4)2.05[(OH)2.92F2.96]Σ5.88⋅8.91H2O, based on 23 anions. Analysis of a specimen from the type locality, the nearby Klemm's quarry, Moculta, gave a similar formula, Na0.59K0.06Ca0.36Mg0.92Al3.16(PO4)1.97[(OH)4.08F2.70]Σ6.78⋅8.36H2O. Na and F were not analysed in the original description of the mineral. The ideal end-member formula is [Mg(H2O)6][Na(H2O)2Al3(PO4)2(OH)6]⋅H2O, compared to the original formula of Mg5Al12(PO4)8(OH)22⋅nH2O with n ≈ 32. Aldermanite is monoclinic, P21/c with a = 13.524(3), b = 9.958(2), c = 7.013(1) Å and β = 97.40(3)°. The crystal structure of aldermanite is built from sawtooth layers of cis- and trans-corner-connected, Al-centred octahedra, decorated with corner-connected PO4 tetrahedra to give (100) layers of composition Al3(PO4)2(OH,F)6. Interlayer Mg(H2O)6 octahedra and H2O molecules hold the layers together through H bonding. The corner-connected octahedra form 6-membered rings that are centred by 8-coordinated Na and have a topology identical to a 3-octahedra-wide {110} slice of the pyrochlore structure. This pyrochlore element contains intersecting kagomé nets of Al atoms, parallel to (111) and (11$\bar{1}$) of cubic pyrochlore. Minerals of the walentaite group, as well as zirconolite-3O polytypes have the same type of intersecting kagomé nets of small cations.

Copper-sulfides within carbonatites and phoscorites of the Phalaborwa Igneous Complex, South Africa, have been investigated since the middle of the 20th Century. However, aspects of ore formation have remained unclear. This study examines the mechanisms involved in Cu-sulfide mineralisation by micro-focus X-ray computed tomography as applied to sulfide-rich drill core samples. Several texturally distinct assemblages of magmatic sulfides can be identified, including: (1) <500 μm rounded bornite and chalcopyrite grains disseminated within the gangue; (2) elongated mm-scale assemblages of chalcopyrite and bornite; and (3) mm-to-cm thick chalcopyrite cumulates. Chalcopyrite veins were also observed, as well as late-stage valleriite, documenting late-stage fluid circulation within the pipe, and alteration of magmatic and hydrothermal sulfides along fractures within the gangue, respectively. The results of micro-focus X-ray computed tomography indicate that magmatic sulfides are sub-vertically aligned. Spatial variability of the sulfide assemblages suggests that textural changes within sulfide layers reflect fluctuating magma flow rate during emplacement of carbonatite–phoscorite magmas, through coalescence or breakup of sulfide liquid droplets during ascent. Modal sulfide abundances, especially for disseminated assemblages, differ from one carbonatite–phoscorite layer to another, suggesting a strong control of the mechanical sorting in the formation of Cu-sulfide textures within the Loolekop carbonatite. The alternation of carbonatite and phoscorite within the intrusion suggest that the Loolekop Pipe was emplaced through a series of successive magma pulses, which differentiated into carbonatite and phoscorite by melt immiscibility/progressive fractional crystallisation and pressure drop. Three-dimensional textural analysis represents an effective tool for the characterisation of magma flow and is useful for the understanding of magmatic processes controlling sulfide liquid-bearing phoscorite–carbonatite magmas.

The assayers’ ingots recovered in 2014 from the SS Central America contain geochemical signatures and anomalies which convey information about the culture of miners and assayers in the late 1850s. A significant number of ingots (21%) contain elevated copper and zinc in the same ratio as a common brass alloy of the period, suggesting that adulteration of placer gold dust was a common issue. The ingots with the brass-like signature also have a gold fineness much lower than measured for typical California placer gold. Trace elements like palladium in uniform concentrations in all Kellogg & Humbert ingots suggest the use of quality high-temperature tools, while lead and tin in all ingots suggest specific contamination and industrial hygiene issues common to the whole industry. Other trace constituents such as arsenic, antimony and bismuth are likely to have originated from dense minerals associated with placer gold, or from the natural placer gold alloy itself. Comparison of modern analysis of ingots vs. assay values stamped on the ingots themselves suggests some firms like Kellogg & Humbert did superior assay work, while others like the San Francisco office of Justh & Hunter probably had issues with quality control. The variations in assay ingot alloy chemistry provide a window into this important period in American history.

Gallium (Ga) and germanium (Ge) are technologically important critical elements. Lead blast furnace slags from Tsumeb, Namibia, comprise over two million metric tons of material that contains high levels of Ga (135–156 ppm) and Ge (128–441 ppm) in addition to significant Zn concentrations (up to 11 wt.%) and represent a potential resource for these elements. A combination of mineralogical and chemical methods (PXRD, FEG-SEM-EPMA and LA-ICP-MS) indicated different partitioning of Ga and Ge within the individual slag phases. Gallium is predominantly bound in small euhedral crystals of Zn–Fe–Al spinels (<10 μm in size), exhibiting concentrations in the range of 480–1370 ppm (up to 0.004 atoms per formula unit, apfu). Concentrations of Ga in other phases (e.g. melilite) are systematically below 90 ppm. The principal host of Ge is the silicate glass and, to a lesser extent, silicates (melilite and olivine group phases). Concentrations of Ge in glass attained a concentration of 470 ppm (EPMA), but the LA-ICP-MS analysis of glass matrix containing submicrometre spinel crystallites indicated that average Ge levels vary in the range of 113–394 ppm. In the potential extraction of Ga and Ge, the results indicate that ultrafine milling is needed to liberate the Ga- and Ge-hosting phases prior to metallurgical processing of the slag.

Panskyite, Pd9Ag2Pb2S4, is a new mineral (IMA2020–039) discovered in the platinum-group element mineralisation of the Southern Kievey ore occurrence of the Fedorova–Pana layered intrusion, Kola Peninsula, Russia. It forms tiny anhedral grains (of 0.5 to 10 μm in size) in the interstices of rock-forming silicates, often forming tiny inclusions in base-metal sulfides (millerite, chalcopyrite, bornite and chalcocite) and complex intergrowths with other platinum group minerals (zvyagintsevite, laflammeite, vysotskite, thalhammerite, unnamed phase Pd9Ag2(Tl,Pb)2S4 and others). In plane-polarised light, panskyite is creamy white with weak bireflectance, weak pleochroism and distinct anisotropy with brown to grey rotation tints; it exhibits no internal reflections. Reflectance values for panskyite in air (R1, R2 in %) are: 43.8, 44.1 at 470 nm; 44.4, 44.7 at 546 nm; 45.6, 45.8 at 589 nm; and 47.2, 47.2 at 650 nm. Twelve electron-microprobe analyses of panskyite gave an average composition: Pd 55.61, Ag 12.36, Pb 23.50, Fe 0.21, Ni 0.24 and S 7.17 total 99.09 wt.%, corresponding to the formula (Pd9.05Fe0.07Ni0.07)Σ9.19Ag1.98Pb1.96S3.87 based on 17 atoms; the average of nine analyses on the synthetic analogue is: Pd 57.02, Ag 14.17, Pb 21.81 and S 7.44, total 100.44 wt.%, corresponding to Pd9.07Ag2.22Pb1.78S3.93. The density, calculated on the basis of the empirical formula, is 9.81 g/cm3. The mineral is tetragonal, space group I4/mmm, with a = 7.973(3), c = 9.139(3) Å, V = 581.0(4) Å3 and Z = 2. The crystal structure was solved from the single-crystal and powder X-ray diffraction data of synthetic Pd9Ag2Pb2S4. Panskyite is isostructural with thalhammerite (Pd9Ag2Bi2S4). The mineral name is for the locality, the Pansky massif of the Fedorova–Pana layered intrusion in the Kola Peninsula, Russia.

Finely laminated (cm–μm scale) metalliferous precipitates are widespread in the surficial environment, especially around mineral deposits and reflect biogeochemical processes that can pervade near-surface environments on a larger scale. Examples in this paper involve precipitates of the transition metals Fe, Cu and Mn with minor Co, Ni, V and Zn; the metalloids As and Sb; and authigenic Au. Mobility and re-precipitation are driven primarily by geochemical disequilibrium, especially with respect to pH and redox states, that arises from complex interactions between biological processes, geological processes, and variations in the surrounding environment. Different degrees of chemical disequilibrium arise on small spatial scales on time scales of days to millennia. Interactions between biota, waters and rocks in these small near-surface settings affect the biogeochemical environments. Sulfur- and iron-oxidising bacteria are common biogeochemical agents associated with sulfide-bearing lithologies, but localised reductive environments can also develop, leading to gradients in pH and redox state and differential metal mobility. In general, there is commonly a spatial separation of Fe-rich precipitates from those with Cu and Mn, and other transition metals also follow Cu and Mn rather than Fe. Metalloids As and Sb have a strong affinity for Fe under oxidising conditions, but not under more reducing conditions. However, complex biogeochemical parageneses of laminated metalliferous deposits preclude prediction of finer formation details. The textures, mineral species, and metal associations within these deposits are likely to be encountered in all facets of mineral deposit development: initial exploration activity of near-surface locations, mining of shallow portions of orebodies, especially supergene zones, and downstream environmental management with respect to discharging metalliferous waters.

The new mineral, zvěstovite-(Zn), ideally Ag6(Ag4Zn2)As4S13, was found in quartz–baryte gangue at the mine dump of the abandoned small deposit of Zvěstov, central Bohemia, Czech Republic. Zvěstovite-(Zn) is associated with tennantite-(Zn), tetrahedrite-(Zn), argentotennantite-(Zn), acanthite and supergene azurite and malachite. The new mineral occurs as rare relic anhedral grains rimmed by acanthite, up to 100 μm in size. Zvěstovite-(Zn) is grey, Mohs hardness is ca. 3½–4, in agreement with other members of the tetrahedrite group; the calculated density is 5.16 g.cm–3. In reflected light, zvěstovite-(Zn) is grey with a greenish tint, without bireflectance, pleochroism or anisotropy. Deep red internal reflections are ubiquitous. Reflectance values of zvěstovite-(Zn) in air (R%) are: 28.5 at 470 nm, 26.9 at 546 nm, 25.5 at 589 nm and 23.8 at 650 nm. The empirical formula for zvěstovite-(Zn), based on electron-microprobe analyses (n = 4), is Ag6.27[(Ag3.90Cu0.38)Σ4.28(Zn1.60Fe0.09Cd0.03)Σ1.72]Σ6.00(As2.26Sb1.48)Σ3.74S12.50. The ideal formula is Ag6(Ag4Zn2)As4S13, which requires (in wt.%) Ag 56.01, Zn 6.79, As 15.56 and S 21.64, total 100.00. Zvěstovite-(Zn) is cubic, I$\bar{4}$3m, with unit-cell parameters: a = 10.850(2) Å, V = 1277.3(8) Å3 and Z = 2. The strongest reflections of the calculated powder X-ray diffraction pattern [d, Å (I) (hkl)] are: 3.1321(100) (222), 2.7125(21) (400), 1.9809(11) (521), 1.9180(31) (440) and 1.6357(15) (622). According to the single-crystal X-ray diffraction data (Robs = 0.051), the crystal structure of zvěstovite-(Zn) agrees with the general features of the members of the tetrahedrite group. Zvěstovite-(Zn) is named after its type locality, Zvěstov; the suffix indicates the dominant divalent C-constituent, according to the approved nomenclature of the tetrahedrite group. It is the As-isotype of rozhdestvenskayaite-(Zn). The mineral and its name have been approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (IMA2020-061).

Beryl from Xuebaoding, Sichuan Province, western China is known for its unusual tabular habit and W–Sn–Be paragenesis in a greisen-type deposit. The crystals are typically colourless transparent to pale blue, often with screw dislocations of hexagonal symmetry on the (0001) crystal faces. Combining electron microprobe analyses and laser ablation inductively coupled plasma mass spectrometry with single-crystal X-ray diffraction (XRD), correlated with Raman and micro-infrared (IR) spectroscopy and imaging, the crystal chemical characteristics are determined. The contents of Na+ (0.24–0.38 atoms per formula unit (apfu)) and Li+ up to 0.38 apfu are at the high end compared to beryl from other localities worldwide. Li+ substitution for Be2+ on the tetrahedral (T2) site is predominantly charge balanced by Na+ on the smaller channel (C2) site, with Na+ ranging from 91.5% to 99.7% (apfu) of the sum of all other alkali elements. Cs+ and minor Rb+ and K+ primarily charge balance the minor M2+ substitution for Al3+ at the A site; all iron at the A site is suggested to be trivalent. The a axis ranges from 9.2161(2) to 9.2171(4) Å, with unit-cell volume from 678.03(3) to 678.48(7) Å3. The c/a ratio of 1.0002–1.0005 is characteristic for T2-type beryl with unit-cell parameters controlled primarily by Be2+ substitution. Transmission micro-IR vibrational spectroscopy and imaging identifies coordination of one or two water molecules to Na+ (type IIs and type IId, respectively) as well as alkali free water (type I). Based on IR absorption cross section and XRD a C1 site water content of 0.4–0.5 apfu is derived, i.e. close to 50% site occupancy. Secondary crystal phases with a decrease in Fe and Mg, yet increase in Na, suggest early crystallisation of aquamarine, with goshenite being late. With similar crystal chemistry to beryl of columnar habit from other localities worldwide, the tabular habit of Xuebaoding beryl seems to be unrelated to chemical composition and alkali content.

The new mineral bianchiniite, Ba2(Ti4+V3+)(As2O5)2OF, has been discovered in the Monte Arsiccio mine, Apuan Alps, Tuscany, Italy. It occurs as brown {001} tabular crystals, up to 1 mm across, with a vitreous lustre. It is brittle, with a perfect {001} cleavage. Streak is brownish. In reflected light, bianchiniite is grey, with orange–yellow internal reflections. It is weakly bireflectant, with a very weak anisotropy in shades of grey. Minimum and maximum reflectance data for COM wavelengths [Rmin/Rmax (%), (λ, nm)] are: 5.0/5.8 (470), 5.7/6.5 (546), 5.7/7.0 (589) and 5.2/6.3 (650). Electron microprobe analyses gave (wt.% – average of 10 spot analyses): TiO2 10.34, V2O3 3.77, Fe2O3 3.76, As2O3 44.36, Sb2O3 0.22, SrO 0.45, BaO 34.79, PbO 0.28, F 1.77, sum 99.74, –O = F –0.75, total 98.99. On the basis of 12 anions per formula unit, the empirical formula of bianchiniite is (Ba2.00Sr0.04Pb0.02)Σ2.06(Ti4+1.14V3+0.44Fe3+0.42)Σ2.00[(As3.96Sb0.02)Σ3.98O10](O1.18F0.82)Σ2.00. Bianchiniite is tetragonal, space group I4/mcm, with unit-cell parameters a = 8.7266(4), c = 15.6777(7) Å, V = 1193.91(12) Å3 and Z = 8. Its crystal structure was refined from single-crystal X-ray diffraction data to R1 = 0.0134 on the basis of 555 unique reflections with Fo > 4σ(Fo) and 34 refined parameters. The crystal structure shows columns of corner-sharing [Ti/(V,Fe)]-centred octahedra running along c, connected along a and b through (As2O5) dimers. A {001} layer of Ba-centred [10+2]-coordinated polyhedra is intercalated between (As2O5) dimers. Bianchiniite has structural relations with fresnoite- and melilite-group minerals. The name honours the two mineral collectors Andrea Bianchini (b. 1959) and Mario Bianchini (b. 1962) for their contribution to the knowledge of the mineralogy of pyrite ± baryte ± iron-oxide ore deposits from the Apuan Alps.

Hydroplumboelsmoreite (IMA21-C), (Pb,□)2(W,Fe3+)2O6(H2O), is a redefined elsmoreite-group mineral in the pyrochlore supergroup. It was found in a ‘jixianite’ cotype specimen provided by Mr. Liu Jianchang, who first found ‘jixianite’ in 1979 in the Jizhou District, Tianjin City, China. The mineral occurs as yellow to reddish brown aggregates, together with raspite and another elsmoreite-group mineral under study. Hydroplumboelsmoreite occurs in cryptocrystalline form and occasionally in octahedral microcrystalline form (under 20 μm in size). The crystals are colourless and translucent with a white streak, and the lustre is adamantine to greasy. Hydroplumboelsmoreite is isotropic, with a calculated refractive index of 2.29, a Mohs hardness of ~4½–5, and a calculated density of 7.47 g⋅cm−3. The strongest five powder X-ray diffraction lines [d in Å(I)(hkl)] are 6.070(28)(111), 3.012(100)(222), 2.603(32)(004), 1.836(35)(044) and 1.568(30)(226). The crystal structure was refined to R1 = 0.0459 using 80 unique reflections collected with MoKα radiation, and the results show that the mineral is cubic, space group Fd$\bar{3}$m, with a = 10.3377(5) Å, V = 1104.77(16) Å3 and Z = 8. Electron microprobe analyses and crystal structure refinement were used to determine the empirical formula: (Pb1.05Sr0.05Ce3+0.07Na0.01□0.82)Σ2.00(W1.32Fe3+0.67Zr0.01)Σ2.00O6[(H2O)0.43O0.19□0.38]Σ1.00. The mineral was named hydroplumboelsmoreite based on the predominance of Pb, W, and molecular H2O in the A, B and Y sites, respectively.

The Quaternary carbonatite–nephelinite Kerimasi volcano is located within the Gregory rift in northern Tanzania. It is composed of nephelinitic and carbonatitic pyroclastic rocks, tuffs, tuff breccias and pyroclastic breccias, which contain blocks of different plutonic (predominantly ijolite) and volcanic (predominantly nephelinite) rocks including carbonatites. The plutonic and volcanic carbonatites both contain calcite as the major mineral with variable amounts of magnetite or magnesioferrite, apatite and forsterite. Carbonatites also contain accessory baddeleyite, kerimasite, pyrochlore and calzirtite. Zr and Nb minerals are rarely observed in rock samples, though they are abundant in eluvial deposits of carbonatite tuff/pyroclastic breccias in the Loluni and Kisete craters. Pyrochlore, ideally (CaNa)Nb2O6F, occurs as octahedral and cubo-octahedral crystals up to 300 μm in size. Compositionally, pyrochlore from Loluni and Kisete differs. The former is enriched in U (up to 19.4 wt.% UO2), light rare earth elements (up to 8.3 wt.% LREE2O3) and Zr (up to 14.4 wt.% ZrO2), and the latter contains elevated Ti (up to 7.3 wt.% TiO2). All the crystals investigated were crystalline, including those with high U content (a = 10.4152(1) Å for Loluni and a = 10.3763(1) Å for Kisete crystals). They have little or no subsolidus alteration nor low-temperature cation exchange (A-site vacancy up to 1.5% of the site), and are suitable for single-crystal X-ray diffraction analysis (R1 = 0.0206 and 0.0290; for all independent reflections for Loluni and Kisete crystals, respectively). Observed variations in the pyrochlore composition, particularly Zr content, from the Loluni and Kisete craters suggest crystallisation from compositionally different carbonatitic melts. The majority of pyrochlore crystals studied exhibit exceptionally well-preserved oscillatory- and sometimes sector-type zoning. The preferential incorporation of smaller and higher charged elements into more geometrically constrained sites on the growing surfaces explains the formation of the sector zoning. The oscillatory zoning can be rationalised by considering convectional instabilities of carbonatite magmas during their emplacement.

Pyrochlore-group minerals are common accessory rare-metal bearing minerals in the calcite and ankerite carbonatites of the Amba Dongar complex (India). Pyrochlore from the Amba Dongar carbonatites differs from that in other Indian complexes in Ta, Zr, Ti, rare earth element (REE) and Pb contents, but is similar with respect to Ca, Ba and Sr abundances. The evolution of pyrochlore composition was studied to understand the alteration processes and the formation of late-stage pyrochlores enriched in REE and Pb. The early magmatic pyrochlore are calcio- and niobium-dominant types and were replaced by secondary cation-deficient varieties as a consequence of the action of hydrothermal fluids and supergene weathering. These processes produce changes mainly at the A site, rarely at the B site, and the original F is replaced by OH– groups. Calcium and Na can be extracted from the structure at the alteration stage and charge balance is achieved by the introduction of REE, Th, U, Ba or Sr. At the latest supergene stages, marginal and fractured zones of pyrochlore grains are altered to Pb-rich, Si-rich and cation-deficient hydrated varieties. The magmatic pyrochlore was crystallised in a highly alkaline environment at a high activity of Ca and at temperatures near 600°C, the alteration of pyrochlore began in a hydrothermal environment at temperatures below 350°C. The major compositional changes that are associated with the alteration are summarised by the following reactions: Ca2+ + Nb5+→ REE3+ + Ti4+; Nb5+ + Fe3+ → Ti4+ + Zr4+; and 2Nb5+ + Ca2+ → Ti4+ + Si4+ + U4+.

Kamchatka is a peninsula located on the far eastern side of Russia and is a geologically active region within the Pacific Ring of Fire. Placer gold particles were obtained from a stream located in the Yelizovsky District and were compared to particles from regions at similar latitudes. Russian gold particle surface textures and morphologies were characterised optically and using electron microscopy, and bacteria occurring on the surface of particles were inferred from detected amplicon sequence variants (ASVs). The gold particles contained remarkably variable gold surface textures with an average 70% of surface area containing clay-filled concavities. Particle morphologies, interpreted from axis ratios, suggested that these particles were transported from primary sources. Proteobacteria constituted 60% of all the detected ASVs from the particles. Within this phylum, Gammaproteobacteria was the most dominant class. This study contributes to the understanding of gold biogeochemical cycling in a distinct bioclimatic environment.

Microlite-group minerals occur as common replacement products after primary and secondary columbite-group minerals (CGM) in albitised blocky K-feldspar and in coarse-grained, muscovite-rich units of the Schinderhübel I, Scheibengraben and Bienergraben beryl–columbite pegmatites in the Maršíkov District (Silesian Unit, Bohemian Massif, Czech Republic). Textural and compositional variations of microlite-group minerals were examined using electron probe micro-analyses and microRaman spectroscopy (μRS). A complex post-magmatic evolution of the pegmatites and the following microlite populations (Mic) and related processes were found: (1) precipitation of U, Na-rich and F-poor Mic I on cracks in CGM; (2) alteration of Mic I to U-rich together with Na- and F-poor Mic II; and (3) partial replacement of Mic I and II by Mic III with a distinct Na, U and Ti loss and Ca and F gain. Stage (2) includes an extensive leaching of Na, without U loss. The final stage (3) produced euhedral-to-subhedral oscillatory zoned Ca and F enriched Mic III with distinctly different composition to the previous F-poor and A-site vacant Mic II. Aggregates of fersmite are associated commonly with Mic III. Distal Mic IIId occurs locally on cracks in K-feldspar or quartz, with compositions analogous to Mic III. Compositional variations and textural features of microlite-group minerals during dissolution–reprecipitation processes serve as sensitive tracers of post-magmatic evolution in granitic pegmatites recording complex interactions between magmatic pegmatite units and externally derived, hydrothermal metamorphic fluids.

Armellinoite-(Ce), ideally Ca4Ce4+(AsO4)4⋅H2O, is a new mineral discovered in Fe–Mn ore in metaquartzites of the Montaldo mine, Corsaglia Valley, Cuneo Province, Piedmont, Italy. It occurs as very small and rare, pale yellow to brown–yellow pseudo-octahedral translucent crystals hosted by a matrix of quartz, hematite, cryptomelane/hollandite, tilasite, muscovite, braunite and montmorillonite. The mineral is translucent, with white streak and has a resinous to vitreous lustre. It is brittle with irregular fracture and fair cleavage parallel to {110} and {100}. Estimated Mohs hardness is ~3–3.5. Calculated density is 4.29 g⋅cm–3. Armellinote-(Ce) is uniaxial (–), ω = 1.795(5), ɛ = 1.765(5) (white light), non-pleochroic and non-fluorescent. Chemical point analyses by WDS-EPMA yielded the empirical formula (based on 17 O+F anions): A(Ca3.89Th0.08Sr0.02La0.03)Σ4.02B(Ce4+0.76Nd0.13Y0.08Gd0.03Sm0.02Pr0.01Dy0.01Ho0.01)Σ1.05[(As4.00P0.01)Σ4.01O4]4⋅(H2O0.85F0.15)Σ2.00. The presence of H2O was confirmed by Raman spectroscopy. The mineral is tetragonal, I41/a, with single-crystal unit-cell parameters a = 10.749(2), c = 12.030(2) Å and V = 1390.0(6) Å3, with Z = 4. The eight strongest X-ray powder diffraction lines are [d Å (Irel; hkl)]: 7.983 (36; 101), 4.443 (23; 2̄11), 2.957 (100; 3̄12), 2.398 (14; 420), 1.875 (22; 424, 325), 1.728 (19; 3̄16), 1.612 (13; 613) and 1.475 (26; 712, 552). The crystal structure (R1 = 0.0284 for 1275 unique reflections) has isolated TO4 (T = As5+) tetrahedra that link Ca2+- or Ce4+-centred polyhedra via common oxygen ligands to form 2D blocks or double-layered (DL) structural units parallel to (001). Armellinoite-(Ce) is isostructural with pottsite, ideally (Pb3Bi)Bi(VO4)4⋅H2O, and closely related to a larger number of anhydrous synthetic compounds. The mineral is named after the mineral collector Gianluca Armellino (b. 1962), who collected the discovery sample.