Achieving the high-precision control of cable-driven parallel robots (CDPRs) is complex because of their structural properties. In this paper, a quintessential redundant CDPR is designed as the research subject, and a continuous switching sliding mode controller based on workspace vision is implemented to enhance the accuracy and stability of trajectory tracking. In addition, a virtual prototype of the CDPR with uncertainties is created in the simulation analysis software ADAMS, and co-simulation is performed with the control system designed in Simulink to validate the effectiveness of the proposed control strategy. Furthermore, a CDPR platform is established for trajectory tracking experiments using the visual-based position feedback method. The trajectory tracking performance with the three control schemes is then evaluated. The experimental results show that the continuous switching sliding mode control algorithm can significantly decrease trajectory tracking errors and exhibit superior trajectory tracking performance compared to the other control strategies.

To solve the constant contact force control problem between the end tool of a 5 degrees of freedom hybrid optical mirror processing robot and a workpiece, an adaptive impedance control method for the pneumatic servo-polishing system of the robot is designed. Firstly, the pneumatic servo-polishing control system at the end of the robot is set up. Secondly, the impedance control method for contact force is investigated based on the mathematical model of the pneumatic servo-polishing control system. Additionally, the causes of steady-state error of impedance control are analyzed theoretically, and the calculation method for steady-state error of impedance control is deduced. Finally, an indirect adaptive impedance controller based on Lyapunov Stability Principle is developed to estimate the environmental stiffness and position online, so as to reduce steady-state error and realize the tracking of polishing contact force. The simulation and experimental results suggest that the adaptive impedance control method not only recognizes that the contact force of the robot is relatively constant during the polishing process but also has high control accuracy for the force, fast-tracking response for the abrupt force, and considerable adaptability to the variable environmental stiffness.

Bayesian inference provides a probabilistic reasoning process for drawing conclusions based on imprecise and uncertain data that has been successful in many applications within robotics and information processing, but is most often considered in terms of data analysis rather than synthesis of behaviours. This paper presents the use of Bayesian inference as a means by which to perform Boolean operations in a logic programme while incorporating and propagating uncertainty information through logic operations by inference. Boolean logic operations are implemented in a Bayesian network of Bernoulli random variables with tensor-based discrete distributions to enable probabilistic hybrid logic programming of a robot. This enables Bayesian inference operations to coexist with Boolean logic in a unified system while retaining the ability to capture uncertainty by means of discrete probability distributions. Using a discrete Bayesian network with both Boolean and Bayesian elements, the proposed methodology is applied to navigate a mobile robot using hybrid Bayesian and Boolean operations to illustrate how this new approach improves robotic performance by inclusion of uncertainty without increasing the number of logic elements required. As any logical system could be programmed in this manner to integrate uncertainty into decision-making, this methodology can benefit a wide range of applications that use discrete or probabilistic logic.

At present, the research of soft crawling robot pays more attention to the material manufacturing, but neglects the robot modeling. The high degree of freedom of the soft crawling robot makes it more difficult to establish its motion model and analyzes its motion performance. The centimeter-level wireless driven soft crawling robot has great advantages and application scenarios in narrow space exploration. Therefore, this paper proposed a soft robot driven by magnetism to crawling inchworm. By studying the crawling behavior of inchworm and the characteristics of flexible materials driven by magnetism, the structure of the soft robot was designed and the motion model of inchworm was established. The motion model is analyzed and simulated, the structure size of the robot is optimized, and the effectiveness of the model is verified by experiments. The robot’s crawling motion is realized by coupling the structure of the robot’s torso and legs with the flexible magnetic film. Driven by the alternating magnetic field, the maximum motion speed of the robot is 28.24 mm/s. At the same time, the robot can also move in narrow space such as pipes, which can satisfy the centimeter-level space detection and ensure the high efficiency, providing a new idea for narrow space detection.

This article proposes a control method for underactuated cartpole systems using semi-implicit cascaded proportional-derivative (PD) controller. The proposed controller is composed of two conventional PD controllers, which stabilizes the pole and the cart second-order dynamics respectively. The first PD controller is realized by transforming the pole dynamics into a virtual PD controller, with the coupling term exploited as the internal tracking target for the cart dynamics. Then, the second PD controller manipulates the cart dynamics to track that internal target. The solution to the internal tracking target relies on an equation set and features a semi-implicit process, which exploits the internal dynamics of the system. Besides, the design of second PD controller relies on the parameters of the first PD controller in a cascaded manner. A stability analysis approach based on Jacobian matrix is proposed and implemented for this fourth-order system. The proposed method is simple in design and intuitive to comprehend. The simulation results illustrate the superiority of proposed method compared with conventional double-loop PD controller in terms of convergence, with the theoretical conclusion of at least locally asymptotic stability.

Unmanned aerial vehicles (UAVs) possess fast-moving abilities and have been used in various tasks in the past decades. However, their performances are still restricted by insufficient endurance and confined environments. Intuitively, combining other locomotion modes with UAVs, such as diving and driving, would be an appropriate idea to improve the robot’s adaptability and solve the endurance problem. Recently, the terrestrial/aerial hybrid robots have drawn the researchers’ eyes for their outstanding performances, which can deploy flight mode to traverse insurmountable terrains and ground mode to increase endurance and realize detailed searches. Therefore, this paper developed the autonomous quadrotor tilting hybrid robot (AQT-HR) to achieve terrestrial/aerial dual-modal mobility and verified that the robot delivers high energy efficiency. The AQT-HR can achieve flying and driving through a quadrotor tilting mechanism, which can alter one single driving force into different directions. Furthermore, the dynamic models of the hybrid robot’s aerial and ground locomotion are derived and introduced into the model-feedforward PID control algorithm for improving the robot’s flying stability. Finally, we conducted some mobility tests and experiments about traversing obstacles to demonstrate that the proposed hybrid robot can realize autonomous mode switching and perform a low energy consumption in ground movement mode.

The increase of human presence in the subsea and seabed environments necessitates the development of more capable and highly dexterous, innovative underwater manipulators. Biomimetic soft-robot arms represent a promising candidate for such manipulation systems. However, the well-known modeling techniques and control theories of traditional rigid robots do not apply to soft robots. The challenges of kinematic and dynamic modeling of soft robots with infinite degrees of freedom require the development of dedicated modeling methods. A novel procedure for representing soft-robotic arms and their motion in a rigid-body simulation environment is proposed in this paper. The proposed procedure relies on the piecewise constant curvature approach to simplify the very complex model of hyper-redundant soft-robotic arms, making it suitable for real-time applications. The proposed method is implemented and verified to be used in model-mediated teleoperation of the soft arms of a biomimetic robotic squid designed for underwater manipulation as a case study.

This paper presents a kinematics modeling and hybrid motion planning framework for wheeled-legged rovers. It is a unified solution for wheeled-legged rovers to traverse multiple challenging terrains using hybrid locomotion. A kinematic model is first established to describe the rover’s motions. Then, a hybrid motion planning framework is proposed to determine the rover’s gait patterns and parameterize the legs’ and the body’s trajectories. Furthermore, an optimization algorithm based on B-spline is utilized to minimize the motors’ energy dissipation and generate smooth trajectories. The wheeled and legged hybridization allows the rover for faster locomotion while maintaining high stability. Besides, it also improves the rover’s ability to overcome obstacles. Prototype experiments are carried out in more complex environments to verify the rover’s flexibility and maneuverability to traverse irregular terrains. The proposed algorithm reduces the swing amplitude by 83.3% compared to purely legged locomotion.

The dual-user training system is essential for fostering motor skill learning, particularly in complex operations. However, the challenge lies in the optimal tradeoff between trainee ability and engagement level. To address this problem, we propose an intelligent agent that coordinates trainees’ control authority during real task engagement to ensure task safety during training. Our approach avoids the need for manually set control authority by expert supervision. At the same time, it does not rely on pre-modeling the trainee’s skill development. The intelligent agent uses a deep reinforcement learning (DRL) algorithm based on trainee performance to adjust adaptive engagement during the training process. Our investigation aims to provide reasonable engagement for trainees to improve their skills while ensuring task safety. Our results demonstrate that this system can seek the policy to maximize trainee participation while guaranteeing task safety.

We present the design and deployment of a capsule endoscope via external electromagnets for locomotion in large volumes alongside its digital twin implementation based on interval type-2 fuzzy logic systems (IT2-FLSs). To perform locomotion, we developed an external mechanism comprising five external electromagnets on a two-dimensional translational platform that is to be placed underneath the patients’ bed and integrated multiple Neodymium magnets into the capsule. The interaction between the central bottom external electromagnet and the internal magnet forms a fixed body frame at the capsule center, allowing rotation. The interaction between the external electromagnets and the two internal magnets results in rotation. The elevation of the capsule is accomplished due to the interaction between the upper external electromagnet and the internal magnets. Through simulations, we model the capsule rotation as a function of torque and drive voltages. We validated the proposed locomotion approach experimentally and observed that the results are highly nonlinear and uncertain. Thus, we define a regression problem in which IT2-FLSs, capable of representing nonlinearity and uncertainty, are learned. To verify the proposed locomotion approach and test the IT2-FLS, we leverage our experimental effort to a stomach phantom and finally to an ex vivo bovine stomach. The experimental results validate the locomotion capability and show that the IT2-FLS can capture uncertainties while resulting in satisfactory prediction performance. To showcase the benefit in a clinical scenario, we present a digital twin implementation of the proposed approach in a virtual environment that can link physical and virtual worlds in real time.

Hyper-redundant robots have good prospects for applications in confined space due to their high flexibility and slim body size. However, the super-redundant structure brings great challenges for its inverse kinematics with shape constraints. Unfortunately, traditional Jacobian pseudo-inverse-based inverse kinematics method and forward and backward reaching inverse kinematics (FABRIK) method are difficult to constrain the arm shape and realize trajectory tracking in confined spaces. To solve this problem, we propose a shape-controllable FABRIK method to satisfy the given path and shape constraints. Firstly, the kinematic model of the hyper-redundant robot is established, and the canonical FABRIK method is introduced. Based on the preliminary works, the single-layer improved FABRIK method is developed to solve the position and pointing inverse kinematics considering path environment and joint angle constraints instead of two-layer geometric iterations. For tracking the desired end roll angles, the polygonal virtual arm is designed. The real arm roll angle is achieved by controlling its winding on the virtual arm. In this way, the shape can be controlled. Finally, we compare the proposed method with other three approaches by simulations. Results show that the proposed method is more efficient and the arm shape is controllable.

Aerospace represents the development of national science and technology. It is an important foundation for exploring space and an important guarantee for the construction of aerospace power. There are many large workpieces in the aerospace field. The box insulation layer of large workpieces is an important processing problem. A new thick processing equipment is proposed to process the box insulation layer of large workpieces. The thick processing equipment consists of the XYZ shaft long guide rail and five degrees of freedom (5-DOF) RAPA. The mechanical structure of the 5-DOF RAPA is a redundantly actuated parallel mechanism (RAPM). Meanwhile, this paper proposes a new method to design 5-DOF redundantly actuated parallel mechanisms (RAPMs) with large output rotational angles. Based on configuration evolution and Li group, two articulated moving platforms (AMPs) and four kinds of limbs are designed, and a series of 3T2R (T represents translation, R represents rotation) RAPMs and 2T3R RAPMs are synthesized. To verify the designed RAPMs with large angle, an example of RAPMs, 4UPS-{2UPR}-R is analyzed. To ensure that the RAPM has no mechanism vibration impact in movement, this paper represents the RAPM adopts a newly proposed trajectory planning method. The results show that the 4SPU-(2UPR)R mechanism possesses large angles and verifies the efficiency of the new proposed trajectory planning method in simplified trajectories. This work lays the foundation for processing the box insulation layer of large workpieces with straight lines and arcs paths.

In order to resolve redundancy and path planning of a high DOF mobile manipulator using conventional approaches like Jacobian and a pseudoinverse method, researchers face the limitation of computational load and delay in response. If such kind of mobile manipulator is traversing the rough terrain, then conventional methods become too costly to implement due to the handling of redundant joints, obstacles, and wheel-terrain interaction. A few optimization-based redundancy resolution approaches try incorporating wheel-terrain interaction but fail in real-time response. This paper describes a 14 DOF Rover Manipulator System’s end-effector path-tracking approach using CG-Space framework to incorporate wheel-terrain interaction. CG-Space means the center of gravity (CG) locus of the Rover. The Rover’s CG is calculated while traversing over 3D terrain using a multivariable optimization method and a 3D point cloud image of the actual terrain and stored as CG-Space over the given terrain. First of all, we decide which part of the system moves to track the path, that is, arm or Rover, depending upon the manipulator’s work volume and manipulability measure restrictions. The next task is to obtain the Rover pose according to the end-effector path using a simple arm’s inverse kinematic solution between the CG-Space and end-effector task space without resolving redundancy. Meanwhile, obstacles and non-traversable regions are avoided in CG-Space. On diverse 3D terrains, simulation and experimental results support the suggested CG-Space framework for end-effector tracking.

The concept of distance between two rigid-body poses is important in path planning, positioning precision, mechanism synthesis, and in many other applications. In the definition of such a distance, two approaches mainly prevail, which lead to a number of formulas devised to match the needs of motion tasks. Despite the different approaches and formulas, some important theoretical results, which drive toward distance-metrics definitions useful for design and application purposes, have been stated. This paper summarizes the two different approaches together with a critical review of the literature on the distance metrics they generated, and, then, it illustrates a technique, previously proposed by the author, for combining different metrics to obtain novel distance-metric definitions that are tailored to specific applications.