In the present modern age, a robot works like human and is controlled in such a manner that its movements should not create hindrance in human activities. This characteristic involves gesture feat and gesture recognition. This article is aimed to describe the developments in algorithms devised for obstacle avoidance in robot navigation which can open a new horizon for advancement in businesses. For this purpose, our study is focused on gesture recognition to mean socio-technological implication. Literature review on this issue reveals that movement of robots can be made efficient by introducing gesture-based collision avoidance techniques. Experimental results illustrated a high level of robustness and usability of the Gesture recognition (GR) system. The overall error rate is almost 10%. In our subjective judgment, we assume that GR system is very well-suited to instruct a mobile service robot to change its path on the instruction of human.

This paper presents a robust adaptive impedance controller for robot manipulators using function approximation techniques (FAT). Recently, FAT-based robust impedance controllers have been presented using Fourier series expansion for uncertainty estimation. In fact, sinusoidal functions can approximate nonlinear functions with arbitrary small approximation error based on the orthogonal functions theorem. The novelty of this paper in comparison with previous related works is that the number of required regressor matrices in this paper has been reduced. This superiority becomes more dominant when the manipulator degrees of freedom (DOFs) are increased. First, the desired signals for motor currents are calculated, and then the desired voltages are obtained. In the proposed approach, only a simple model of the actuator and manipulator dynamics is used in the controller design and all the rest dynamics are treated as external disturbance. The external disturbances can then be approximated by Fourier series expansion. The adaptation laws for Fourier series coefficients are derived from a Lyapunov-based stability analysis. Simulation results on a 2-DOF planar robot manipulator including the actuator dynamics indicate the efficiency of proposed method.

Estimating the robot state within a known map is an essential problem for mobile robot; it is also referred to “localization”. Even LiDAR-based localization is practical in many applications, it is difficult to achieve global localization with LiDAR only for its low-dimension feedback, especially in environments with repetitive geometric features. A sensor-fusion-based localization system is introduced in this paper, which has the capability of addressing the global localization problem. Both LiDAR and vision sensors are integrated, making use of the rich information introduced by vision sensor and the robustness from LiDAR. A hybrid grid-map is built for global localization, and a visual global descriptor is applied to speed up the localization convergence, combined with a pose refining pipeline for improving the localization accuracy. Also, a trigger mechanism is introduced to solve kidnapped problem and verify the relocalization result. The experiments under different conditions are designed to evaluate the performance of the proposed approach, as well as a comparison with the existing localization systems. According to the experimental results, our system is able to solve the global localization problem, and the sensor-fusion mechanism in our system has an improved performance.

Robotic swimmers are currently a subject of extensive research and development for several underwater applications. Clever design and planning must rely on simple theoretical models that account for the swimmer’s hydrodynamics in order to optimize its structure and control inputs. In this work, we study a planar snake-like multi-link swimmer by using the “perfect fluid” model that accounts for inertial hydrodynamic forces while neglecting viscous drag effects. The swimmer’s dynamic equations of motion are formulated and reduced into a first-order system due to symmetries and conservation of generalized momentum variables. Focusing on oscillatory inputs of joint angles, we study optimal gaits for 3-link and 5-link swimmers via numerical integration. For the 3-link swimmer, we also provide a small-amplitude asymptotic solution which enables obtaining closed-form approximations for optimal gaits. The theoretical results are then corroborated by experiments and motion measurement of untethered robotic prototypes with three and five links floating in a water pool, showing a reasonable agreement between the experiments and the theoretical model.

This paper presents a model-based approach for the first time to identify the crack location for the hinge-based planar RRR compliant mechanism, a parallel micro-motion stage driven by piezoelectric (PZT) actuators. However, cracks more likely occur on a flexure hinge because it usually undergoes a periodic deformation in service, which eventually compromises mechanism's performance, positioning accuracy for instance. In this work, the pseudo-rigid-body method is used to develop kinematic and dynamic models of the RRR mechanism both in healthy and damaged conditions, where the crack is considered in terms of the rotational compliance of a flexible hinge. The crack location is determined by measuring PZT elongations, which represents the driving toque deviation because of the crack presence. Numerical simulation is conducted to verify the proposed approach, and the results show good match of the identified crack location with the assumed location. Finally, experiments on the RRR mechanism with a prefabricated crack is performed to further validate the proposed models; the experimental results yield a good consistence.

This paper provides a contribution to the singularity analysis of the parallel manipulators by introducing the position singularities in addition to the motion and actuation singularities. The motion singularities are associated with the linear velocity mapping between the task and joint spaces. So, they are the singularities of the relevant Jacobian matrices. On the other hand, the position singularities are associated with the nonlinear position mapping between the task and joint spaces. So, they are encountered in the position-level solutions of the forward and inverse kinematics problems. In other words, they come out irrespective of the velocity mapping and the Jacobian matrices. Considering these distinctions, a kinematic singularity is denoted here by one of the four acronyms, which are PSFK (position singularity of forward kinematics), PSIK (position singularity of inverse kinematics), MSFK (motion singularity of forward kinematics), and MSIK (motion singularity of inverse kinematics). There may also occur an actuation singularity (ACTS) concerning the kinetostatic relationships that involve forces and moments. However, it is verified that an ACTS is the same as an MSFK. Each singularity induces different consequences in the joint and task spaces. A PSFK imposes a constraint on the active joint variables and makes the end-effector position indefinite and uncontrollable. Therefore, it must be avoided. An MSFK imposes a constraint on the rates of the active joint variables and makes the end-effector motion indefinite and easily perturbable. Besides, since it is also an ACTS, it causes the actuator torques or forces to grow without bound. Therefore, it must also be avoided. On the other hand, a PSIK imposes a constraint on the end-effector position but provides freedom for the active joint variables. Similarly, an MSIK imposes a constraint on the end-effector motion but provides freedom for the rates of the active joint variables. A PSIK or MSIK need not be avoided if the constraint it imposes on the position or motion of the end-effector is acceptable or if the task can be planned to be compatible with that constraint. Besides, with such a compatible task, a PSIK or MSIK may even be advantageous, because the freedom it provides for the active joint variables can sometimes be used for a secondary purpose. This paper is also concerned with the multiplicities of forward kinematics in the assembly modes of the manipulator and the multiplicities of inverse kinematics in the posture modes of the legs. It is shown that the assembly mode changing poses of the manipulator are the same as the MSFK poses, and the posture mode changing poses of the legs are the same as the MSIK poses.

Computational Kinematics is a wide field of science addressing applications ranging from robotics to mechanics, computer science, mathematics and computer graphics.

Minimally invasive surgery is a developing direction of modern medicine. With the successful development of controllable capsule endoscopies, capsule robots are very popular in the field of gastrointestinal medicine. At present, the study of intestinal robots is aimed at the pipeline environment of a single-phase liquid flow. But there exist food residues (i.e. solid particles) or liquid foods in the actual intestine, so intestinal fluid should be liquid–solid or liquid–liquid two-phase mixed fluid. For inner spiral capsule robots with different internal diameters and outer spiral capsule robots, using computational fluid dynamics (CFD) method, the operational performance indicators (i.e. axial thrust force, circumferential resisting moment and maximum pressure to pipeline wall) of spiral capsule robots are numerically calculated in the liquid–solid or liquid–liquid two-phase mixed fluid. By the orthogonal experimental optimization method, the optimum design of spiral capsule robots is obtained in the liquid–solid mixed fluid. The experimental verification has been also carried out. The results show that in the liquid–solid two-phase fluid, the axial thrust force and circumferential resisting moment of the spiral capsule robots decrease with the increase of the size or concentration of solid particles. In the same liquid–solid or liquid–liquid mixed fluid, the operational performance indicators of outer spiral robots are much higher than those of inner spiral robots, and the operational performance indicators of inner spiral robots with bigger internal diameters are higher than those with smaller internal diameters. Adding solid particles of high concentration in the pipeline containing liquid will reduce the drive performance of spiral capsule robots, but adding another liquid of high viscosity will improve the drive performance of spiral capsule robots.

Despite recent advancements on cloud-enabled and human-in-the-loop cyber-physical systems, there is still a lack of understanding of how infrastructure-related quality of service (QoS) issues affect user-perceived quality of experience (QoE). This work presents a pilot experiment over a cloud-enabled mobility assistive device providing a guidance service and investigates the relationship between QoS and QoE in such a system. In our pilot experiment, we employed the CloudWalker, a system linking smart walkers and cloud platforms, to physically interact with users. Different QoS conditions were emulated to represent an architecture in which control algorithms are performed remotely. Results point out that users report satisfactory interaction with the system even under unfavorable QoS conditions. We also found statistically significant data linking QoE degradation to poor QoS conditions. We finalize discussing the interplay between QoS requirements, the human-in-the-loop effect, and the perceived QoE in healthcare applications.

While initially conceived for human motion augmentation, wearable robots have gradually evolved as technological aids in motion assistance and rehabilitation. There are increasing real-world applications in industrial and medical scenarios. Though efforts have been made on wearable robotic systems, e.g. robotic prostheses and exoskeletons, there are still several challenges in kinematics and actuation solutions, dynamic analysis and control of human-robot systems, neuro-control and human-robot interfaces; ergonomics and human-in-the-loop optimization. Meanwhile, real-world applications in industrial or medical scenarios are facing difficulties considering effectiveness.

Achieving the asymptotic tracking control of electrically driven robot manipulators is a challenging problem due to approximation/modelling error arising from parametric and non-parametric uncertainty. Thanks to the specific property of Taylor series systems as they are universal approximators, this research outlines two robust control schemes using an adaptive Taylor series system for robot manipulators, including actuators' dynamics. First, an indirect adaptive controller is designed such as to approximate an uncertain continuous function by using a Taylor series system in the proposed control law. Second, a direct adaptive scheme is established to employ the Taylor series system as a controller. In both controllers, not only a robustifying term is constructed using the estimation of the upper bound of approximation/modelling error, but the closed-loop stability, as well as the asymptotic convergence of joint-space tracking error and its time derivative, is ensured. Due to the design of the Taylor series system in the tracking error space, our technique clearly has an advantage over fuzzy and neural network-based control methods in terms of the small number of tuning parameters and inputs. The proposed methods are simple, model free in decentralized forms, no need for uncertainty bounding functions and perfectly capable of dealing with parametric and non-parametric uncertainty and measurement noise. Finally, simulation results are introduced to confirm the efficiency of the proposed control methods.

An effective path planner is critical for autonomous traversal of unmanned ground vehicles (UGVs) in harsh environments. This paper describes a novel path planning method considering Bézier curves and a two-layer planning framework. In the two-layer framework, a road centerline (RCL) estimator located on the upper layer works as a global planner to obtain the local target for the bottom local planner. The RCL is estimated from a series of candidate Bézier curves based on a safety criterion. In the bottom layer, an optimal trajectory planner and a speed planner make up the local planner to obtain the desired steering turning angle and linear speed. The criteria for optimal trajectory selection are designed for comfortable driving. Road safety is considered in the speed planner for robust driving. Three sets of simulations are used to evaluate and quantify the relative performance of variations of our path planning algorithm. The proposed path planning method is implemented on a modified Polaris RZR 800 UGV, too. Two experiments based on this UGV are set up in the country road environment to demonstrate the viability of the proposed method.

Singularity analysis of parallel manipulators is an active research field in robotics. The present article derives for the first time in the literature a condition under which a five-bar parallel robot encounters high-order parallel singularities. In this regard, by focusing on the planar 5R mechanism, a theorem is given in terms of the slope of its coupler curve at the parallel singular configurations. At high-order parallel singularities, the associated determinant vanishes simultaneously with at least its first-order time derivative. The determination of such singularities is quite important since in their presence, some special conditions should be satisfied for bounded inverse dynamic solutions.

The unique frictional properties conferred by snake ventral scales inspired the engineering and fabrication of surrogate mechanisms for a robotic snake. These artificial, biologically inspired scales produce anisotropic body-ground forcing patterns with various locomotion surfaces. The benefits they confer to robotic snake-like locomotion were evaluated in experimental trials employing rectilinear, lateral undulation, and sidewinding gaits over several distinct surface types: carpet, inhomogeneous concrete and homogeneous concrete. Enhanced locomotive performance, with respect to net displacement and heading stability, was consistently measured in scenarios that utilized the engineered scales, over equivalent scenarios where the anisotropic effects of scales were absent.

With an ability to mimic the human behaviour and replace human efforts in proper platforms, humanoid robots have always acquired a special place among robotics practitioners. Being a complex method of analysis, navigation and path planning, humanoid robots still possess an interesting yet challenging area of investigation. In the current work, a novel navigational strategy has been proposed for smooth and hassle-free movement of single as well as multi-humanoid robots in complex environments. Here, the navigational plan is based on a virtual target displacement strategy which is activated when the robot is unable to find a safe path along the actual target line. After detection of a potential obstacle by the sensors of the robot, a number of virtual targets are generated around the actual target. Then, the most feasible path and point to move are calculated by assigning suitable weightage through several selected parameters to each target line and visualizing the safest path. The proposed approach is implemented on a V-REP simulation platform, and the simulation results are also validated against an experimental set-up prepared under test conditions. The validation of simulation results against experimental counterparts has revealed satisfactory agreement between them. To avoid possibility of any inter-collision during navigation of multi-humanoids under a common platform, a Petri-Net strategy has been integrated along with the proposed control strategy. Finally, the developed approach is also assessed against another existing navigational controller, and a significant performance improvement has been observed.

There have been significant interests and efforts in the field of impedance control on robotic manipulation over last decades. Impedance control aims to achieve the desired mechanical interaction between the robotic equipment and its environment. This paper gives the overview and comparison of basic concepts and principles, implementation strategies, crucial techniques, and practical applications concerning the impedance control of robotic manipulation. This work attempts to serve as a tutorial to people outside the field and to promote discussion of a unified vision of impedance control within the field of robotic manipulation. The goal is to help readers quickly get into the problems of their interests related to impedance control of robotic manipulation and to provide guidance and insights in finding appropriate strategies and solutions.

Humanoid robots (HR) equipped with a sophisticated facial character analysis (FCA) algorithm can able to initiate crucial improvements in human–robot interactions. This paper, for the first time in the literature, proposes a three-stage FCA algorithm for the HR. At the initial stage of this algorithm, the HR detects the face with the Viola–Jones algorithm, and then important facial distance measurements are obtained with the geometric-based facial distance measurement technique. Finally, the measured facial distances are evaluated with the physiognomy science to reveal the characteristic properties of a person. Even though the proposed algorithm can be implemented to all HR, in this paper, it has been specifically applied to NAO HR. The reliability of the developed FCA algorithm is verified by analyzing each terminal decision about the character and its connection with the measured facial distances in the anatomy science.

This paper discusses the concept and parameter design of a robust stair-climbing compliant modular robot, capable of tackling stairs with overhangs. Geometry modifications of the periphery of the wheels of our robot helped in tackling overhangs. Along with establishing a concept design, the robust design parameters are set to minimize performance variations. The Grey-based Taguchi method is applied to provide an optimal setting for the design parameters of the robot. The robot prototype is shown to have successfully scaled stairs of varying dimensions, with overhang, thus corroborating the analysis performed.

In this paper, we propose a bioinspired path planning algorithm for finding a high-quality initial solution based on the pipeline of the Rapidly exploring Random Tree (RRT) method by modifying the sampling process. The modification mainly includes controlling the sampling space and using the probabilistic sampling with the two-dimensional Gaussian mixture model. Inspired by the tropism of plants, we use a Gaussian mixture model to imitate the tree’s growth in nature. In a 2D environment, we can get an approximate moving point’s probabilistic distribution, and the initial path can be found much quickly guided by the probabilistic heuristic. At the same time, only a small number of nodes are generated, which can reduce the memory usage. As a meta-algorithm, it can be applicable to other RRT methods and the performance of underlying algorithm is improved dramatically. We also prove that the probabilistic completeness and the asymptotic optimality depend on the original algorithm (other RRTs). We demonstrate the application of our algorithm in different simulated 2D environments. On these scenarios, our algorithm outperforms the RRT and the RRT* methods on finding the initial solution. When embedded into post-processing algorithms like the Informed RRT*, it also promotes the convergence speed and saves the memory usage.

Wearable devices are fast evolving to address mobility and autonomy needs of elderly people who would benefit from physical assistance. Recent developments in soft robotics provide important opportunities to develop soft exoskeletons (also called exosuits) to enable both physical assistance and improved usability and acceptance for users. The XoSoft EU project has developed a modular soft lower limb exoskeleton to assist people with low mobility impairments. In this paper, we present the design of a soft modular lower limb exoskeleton to improve person’s mobility, contributing to independence and enhancing quality of life. The novelty of this work is the integration of quasi-passive elements in a soft exoskeleton. The exoskeleton provides mechanical assistance for subjects with low mobility impairments reducing energy requirements between 10% and 20%. Investigation of different control strategies based on gait segmentation and actuation elements is presented. A first hip–knee unilateral prototype is described, developed, and its performance assessed on a post-stroke patient for straight walking. The study presents an analysis of the human–exoskeleton energy patterns by way of the task-based biological power generation. The resultant assistance, in terms of power, was 10.9% ± 2.2% for hip actuation and 9.3% ± 3.5% for knee actuation. The control strategy improved the gait and postural patterns by increasing joint angles and foot clearance at specific phases of the walking cycle.