Significant uncertainty surrounds the processes involved in the formation of basalt-hosted corundum, particularly the role that the mantle plays in corundum generation. Some previous studies have suggested that trace-element ratios (namely, Cr/Ga and Ga/Mg) are useful for distinguishing two types of corundum: ‘magmatic’ and ‘metamorphic’, designations that include mantle and crustal processes. However, recent studies, including this one, have discovered transitional groups between these end-members that are difficult to classify.We used laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) to measure trace-element concentrations in sapphire and ruby crystals from eight alluvial deposits that span a significant length of the eastern Australian gemstone belt. Additionally, we collected LA–ICP–MS U–Pb and traceelement data from zircon megacrysts atWeldborough, Tasmania, which is also within the gemstone belt. Our sapphire and ruby results reveal a continuum in trace-element compositions, an observation that raises questions regarding previous classifications that ascribe corundum from basalt-hosted gemfields to either ‘magmatic’ or ‘metamorphic’ sources. The spatial association of basalt-related gemfields in eastern Australia with a long-lived convergent margin suggests a link between corundum formation and Al-enrichment of the mantle wedge during periods of subduction.

Lobanovite, K2Na(Fe42+Mg2Na)Ti2(Si4O12)2O2(OH)4, is a new mineral of the astrophyllite supergroup from Mt. Yukspor, the Khibiny alkaline massif, Kola Peninsula Russia. It has been known previously under the following names: monoclinic astrophyllite, magnesium astrophyllite, magnesiumastrophyllite and magnesioastrophyllite but has never been formally proposed and approved as a valid mineral species by the Commission on new Minerals, Nomenclature and Classification of the International Mineralogical Association. It has now been revalidated and named lobanovite after Dr. Konstantin V. Lobanov, a prominent Russian ore geologist who worked in the Kola Peninsula for more than forty years (Nomenclature voting proposal 15-B). Lobanovite has been described from pegmatitic cavities on Mt. Yukspor where it occurs as elongated bladed crystals, up to 0.04 mm wide and 0.2 mm long, with a straw yellow to orange colour. Associated minerals are shcherbakovite, lamprophyllite, delindeite, wadeite, umbite and kostylevite. Lobanovite is biaxial (–) with refractive indices (λ = 589 nm) α = 1.658, βcalc. = 1.687, γ = 1.710; 2Vmeas. = 81.5– 83°. Lobanovite is monoclinic, space group C2/m, a = 5.3327(2), b = 23.1535(9), c = 10.3775(4) Å, β = 99.615(1)°, V = 1263.3 (1) Å 3, Z = 2. The six strongest reflections in the powder X-ray diffraction data [d (Å), I, (hkl)] are: 3.38, 100, (003); 2.548, 90, (063); 10.1, 80, (001); 3.80, 60, (042,131); 3.079, 50, (132,062); 2.763, 90, (1̄71). The chemical composition of lobanovite was determined by electron-microprobe analysis and the empirical formula (K1.97Ba0.01)∑1.98(Na0.65Ca0.14)∑0.79 (Fe3.182+Mg2.02Na1.00Mn0.72)∑6.92(Ti1.99Nb0.06)∑2.05[(Si8.01Al0.06)∑8.07O24]O2(OH)4.03F0.19 was calculated on the basis of 30.2 (O + OH + F) anions, with H2O calculated from structure refinement, Dcalc. = 3.161 g cm–3. In the structure of lobanovite, the main structural unit is the HOH block, which consists of one close-packed O (Octahedral) and two H (Heteropolyhedral) sheets. The M(1–4) octahedra form the O sheet and the T4O12 astrophyllite ribbons and [5]-coordinated Ti-dominant D polyhedra link through common vertices to form the H sheet. The HOH blocks repeat along [001], and K and Na atoms occur at the interstitial A and B sites. The simplified and end-member formulae of lobanovite are K2Na [(Fe2+,Mn)4Mg2Na]Ti2(Si4O12)2O2(OH)4 and K2Na(Fe42+Mg2Na)Ti2(Si4O12)2O2(OH)4, respectively.

The three-dimensional distribution of melt in partially molten synthetic samples compositionally corresponding to diopside (90 wt.%)–anorthite (10 wt.%) and doped with PbO, WO3, MoO3, or Cs2O to enhance contrast was studied by X-ray computed tomography (CT) with synchrotron radiation. The heavy elements were strongly concentrated in the melt and contributed to an increase of the X-ray linear attenuation coefficient (LAC) of it. PbO was found to be compatible with silicate melt (>20 wt.% in solution) and incompatible with diopside crystals. Other oxides WO3 (∼10 wt.%), MoO3 (∼5 wt.%) and Cs2O (< 5 wt.%) are also soluble only in the melt. Such doping is useful not only for LAC control in X-ray CT measurements, but also for systematic control of the structure (wetting properties, distribution and connectivity) of partial melt. This technique gives basic information for discussion of the 3D distribution of partial melt having different wetting properties. As PbO was most effective in visualization of the diopside–anorthite partially molten system, CT images of the PbO-bearing sample were used for further 3D investigation of distribution. A distribution of dihedral angles at solid-melt-solid triple junctions ranging from 22 to 55° was observed with the 3D data. This range in angle distribution was probably caused by anisotropy of crystals and the result supports the argument that there is some limitation in a theoretical framework of stereology which estimates the 3D structure based on 2D observations. Investigators have begun to apply X-ray CT to the study of the 3D distribution of partial melts in rocks using synchrotron radiation. Our study on the effect of doping is one approach for developing a technique to investigate 3D melt distribution.

Dehydration of silanol and molecular water in 60 agates from 12 hosts with ages between 23 to 2717 Ma has been investigated using desiccators and high-temperature furnace heating. There are wide differences in the water data obtained under uncontrolled and fixed atmospheric water vapour pressure conditions. After agate acclimatization at 20°C and 46% relative humidity, the total water (silanol and molecular) was determined in powders and mini-cuboids by heating samples at 1200°C. Agates from hosts < 180 Ma all showed a greater mass loss using powders and demonstrate that after prolonged high-temperature heating, silanol water is partially-retained by the mini-cuboids. Desiccator dehydration of powders and slabs shows that powder preparation can produce water losses; this is particularly relevant in agates from hosts < 180 Ma. The identified problems have consequences for water quantification in agate and chalcedony using infrared or thermogravimetric techniques. Mobile and total water in agate is considered in relation to host-rock age, mogánite content and crystallite size. Links are observed between the various identified water contents allowing comment on quartz development and agate genesis. The water data also supports previous claims that agates from New Zealand and Brazil were formed long after their host.

Rare phases of the Au–Ag–Sb system were recognized in the Krásná Hora Sb-Au deposit (Sb 1.5–3 wt.%; Au 3–5 ppm), Czech Republic which correspond to auriferous dyscrasite (up to 7 at.% Au), auriferous allargentum (up to 34 at.% Au), and an unnamed phase with composition similar to the eutectics (E1, E2) of the experimental Au–Ag–Sb system. The dominant ore mineral is stibnite with rare native antimony, native gold and a Ag-Au alloy. Textural relationships are well established: stibnite (early) →gold → aurostibite → native antimony (late). Gold is present in four generations: Au-1 (0–15 at.% Ag) is the most abundant type; Au-2 (20–70 at.% Ag) forms thin rims along intra-grain boundaries of Au-1; Au-3 and Au-4 are rare and almost pure (∼0 at.% Ag). The formationof most of the Au-2 and of Au-Ag-Sb phases is associated with Ag-mobilization coupled with the Au-1 to aurostibite transformation via dissolution-precipitation and solid-state diffusion processes at temperatures <200°C.

Nolzeite, Na(Mn,□)2[Si3(B,Si)O9(OH)2]·2H2O, is a new mineral found in altered sodalite syenite at the Poudrette quarry, La Vallée-du-Richelieu, Montérégie (formerly Rouville County), Québec, Canada. Crystals are colourless to pale green and are acicular with average dimensions of 5 μm × 8 μm × 55 μm. They occur as radiating to loose, randomly oriented groupings within vugs associated with aegirine, nepheline, sodalite, eudialyte-group minerals, analcime, natron, pyrrhotite, catapleiite, steedeite and the unidentified mineral, UK80. Nolzeite is non-pleochroic, biaxial, with nmin = 1.616(2) and nmax = 1.636(2) and has a positive elongation. The average of six chemical analyses gave the empirical formula: Na1.04(Mn1.69□0.24Fe0.05Ca0.02)∑=2.00(Si2.96S0.04)∑=3.00(B0.70Si0.30)∑=1.00O9(OH)2·2H2O based on 13 anions. The Raman spectrum shows six distinct bands occurring at ∼3600–3300 cm–1 and 1600–1500 cm–1 (O–H and H–O–H bending), 1300–1200 cm–1 (B–OH bending), 1030–800 cm–1 (Si–O–Si stretching) as well as 700–500 cm–1 and 400–50 cm–1 (Mn–O and Na–O bonding, respectively). The FTIR spectrum for nolzeite shows bands at ∼2800 –3600 cm–1(O–H) stretching, a moderately sharp band at 1631 cm –1(H–O–H) bending, strong, sharp bands at ∼650 –700 cm–1, ∼800 –840 cm–1, and ∼900–1100 cm–1(Si–O and B –O) bonds. Nolzeite is triclinic, crystallizing in space group P with a = 6.894(1), b = 7.632(2), c = 11.017(2) Å, α= 108.39(3), β= 99.03, γ = 103.05(3)°, V = 519.27 Å3, and Z = 2. The crystal structure was refined to R = 12.37% and wR2 = 31.07% for 1361 reflections (Fo > 4σFo). It is based on chains of tetrahedra with a periodicity of three (i.e. a dreier chain) consisting of three symmetrically independent SiO4 tetrahedra forming C-shaped clusters closed by BO2(OH)2 tetrahedra, producing single loop-branched dreier borosilicate chains. The chains are linked through shared corners to double chains of edge-sharing MnO5(OH) octahedra. Nolzeite is a chain silicate closely related to steedeite and members of the sérandite–pectolite series. Paragenetically, nolzeite is late-stage, probably forming under alkaline conditions and over a narrow range of low pressures and temperatures.

Hansblockite, ideally (Cu,Hg)(Bi,Pb)Se2, is a new selenide from the El Dragón mine, Bolivia. It typically occurs in thin subparallel plates intergrown with two unnamed Cu–Hg–Pb–Bi–Se species, clausthalite, Corich penroseite and petrovicite.It also forms subhedral to anhedral grains up to 150 μm long and 50 μm wide. Hansblockite is non-fluorescent, black and opaque with a metallic lustre and black streak. It is brittle, with an irregular fracture and no obvious parting and cleavage. The VHN20 values range from37 to 50 (mean 42) kg mm–2 (Mohs hardness 2–2½). In plane-polarized incident light, hansblockite is cream to light grey in colour, weakly bireflectant and weakly pleochroic from greyish cream to cream. Under crossed polars, hansblockite is weakly anisotropic withkhaki to pale blue rotation tints. The reflectance values in air for the Commission on Ore Mineralogy (COM) standard wavelengths are: 47.3–48.1 (470 nm), 47.4–49.9 (546 nm), 47.1–49.0 (589 nm) and 46.6–48.5 (650 nm). The mean composition is Cu 9.31, Ag 0.73, Hg 11.43,Pb 3.55, Ni 0.17, Co 0.03, Bi 31.17, Se 34.00, total 100.39 wt.%. The mean empirical formula (based on 4 apfu) is (Cu0.68Hg0.27Ag0.03Ni0.01)∑=0.99(Bi0.69Pb0.31)∑=1.00Se2.01. The simplifiedformula is (Cu,Hg) (Bi,Pb)Se2. Hansblockite is monoclinic, space group P21/c, with a = 6.853(1), b = 7.635(1), c = 7.264(1) Å, β = 97.68(1)°, V = 376.66(9) Å3 and Z = 4. Density is 8.26 gcm–3. The five strongest powder X-ray diffraction lines [d in Å (I/I0) (hkl)] are: 3.97 (90) (111), 3.100 (40) (121), 2.986 (100) (211), 2.808 (50) (112) and 2.620 (50) (022). Hansblockite represents the monoclinic polymorph ofgrundmannite, CuBiSe2, with Hg and Pb being essential in stabilizing the monoclinic structure via the coupled substitution Cu+ + Bi3+⇔ Hg2+ + Pb2+. The mineral name is in honour of Hans Block (1881–1953), in recognition of hisimportant role in boosting Bolivian ore mining.

The new mineral pharmazincite, KZnAsO4, was found in sublimates of the Arsenatnaya fumarole at the Second scoria cone of the Northern Breakthrough of the Great Tolbachik Fissure Eruption, Tolbachik volcano, Kamchatka, Russia. It is closely associated with shchurovskyite, dmisokolovite, bradaczekite, arsmirandite, tilasite, johillerite, tenorite, hematite, aphthitalite and As-bearing orthoclase. Pharmazincite occurs as prismatic to acicular crystals up to 1 mm long and up to 0.03 mm thick typically combined in near parallel, radial or chaotic intergrowths, open-work aggregates or crusts up to 2 mm across. Pharmazincite is colourless to white, transparent, with a vitreous lustre. It is brittle, with a stepped fracture and a perfect cleavage parallel to [001]. Dcalc is 4.75 g cm–3. Pharmazincite is optically uniaxial (–),ω = 1.649(2), ε = 1.642(2). The Raman spectrum is reported. The chemical composition (wt.%, electron-microprobe data) is: K2O 18.98, CaO 0.14, MgO 1.20, CuO 4.41, ZnO 27.58, Fe2O3 0.15, P2O5 0.50, As2O546.67, total 99.63. The empirical formula, calculated based on 4 O apfu, is: (K0.97Ca0.01)∑0.98(Zn0.82Cu0.13Mg0.07Fe0.013+)∑1.03(As0.98P0.02)∑1.00O4.The strongest reflections of the powder X-ray diffraction pattern [d,Å(I)(hkl)] are: 6.36 (28)(111), 4.64(45)(220), 4.35(48)(002), 3.260(36)(411), 3.179(100)(222), 2.770(26)(113), 2.676(77)(600), 2.278(15)(602) and 1.710(15)(713, 115). Pharmazincite is hexagonal, a = 18.501(4), c = 8.7114(9) Å, V = 2582.4(8) Å3 and Z = 24 (single-crystal XRD data). Its space group is P63, by analogy with synthetic KZnAsO4 that has a crystal structure based upon a tetrahedral tridymite-type{ZnAsO4}– framework. It is isostructural with megakalsilite KAlSiO4. The new mineral is named for its chemical constituents.

Dyrnaesite-(La), Na7.89(Ce0.94Ca0.06)∑1.00(La1.14Ce0.40Pr0.10Nd0.24Ca0.12)∑2.00(PO4)6 is orthorhombic, Pnma, a = 18.4662(7), b= 16.0106(5), c = 7.0274(2) Å, V = 2077.7(1) Å3, Z = 4. The crystal structure is related to the group of Na3REE(XO4)2 compounds (with X = P, V, As), based on the aphthitalite/glaserite structural type. Dyrnaesite is distinct in having ordered Na vacancies, and a rare-earth element (REE) site occupied preferentially by Ce4+. This also distinguishes it from closely related vitusite-(Ce) [Na3REE(PO4)2]. The relation of their unit cells is: ad= bv, bd = 3av, cd = 1/2 cv. The distinct Ce4+ site in dyrnaesite-(La) has smaller coordination with shorter bond lengths than the other REE site in the same structure or the REE sites in vitusite-(Ce). It is adjacent to the predominately vacant Na site, which in its turn has the largest coordination of all Na sites in the structure. REE sites, or Na sites in a [010] row (similar to [100] in vitusite(Ce)) assume two types of coordinations with and without mirror symmetry and two different configurations of surrounding PO4 tetrahedra. This summarizes the topological difference to vitusite-(Ce) where the corresponding coordinations are similar in the same row and intermediate in character to the two types in dyrnaesite-(La).

The determination of reliable weathering/dissolution rates for cement phases is of fundamental importance for the modelling of the temporal evolution of both radioactive waste repositories and CO2 geological storage sites (e.g. waste matrix, plug in boreholes). Here, the dissolution kinetics of AFm-Cl (hydrated calcium aluminates containing interlayer Cl) has been studied using flow-through experiments conducted at pH values ranging from 9.2 to 13. Mineralogical (XRD) and chemical (EPMA, TEM) analyses have been performed to determine the evolution of the phases during the dissolution experiments. For pH values between 10 and 13, the dissolution of AFm-Cl is congruent (i.e. Ca/Al ratios close to 2 both for solids and outlet concentrations). In contrast, the precipitation of amorphous Al-phases and possibly amorphous mixed Al/Ca phases is observed at pH 9.2, leading to Ca/Al ratios in the outlet solutions higher than those of the initial solid. Therefore, at pH 9.2, even if Cl–/OH– exchange occurs, estimation of dissolution rate from released Cl appears to be the best proxy. Dissolution rates were normalized to the final specific surface areas (ranging from 6.1 to 35.4 m2 g−1). Dissolution rate appears to be pH-independent and therefore the far-from-equilibrium dissolution rate at room temperature is expressed as: logR(mol m–2 s–1) = –9.23 ± 0.18

Pink-orange crystals of a composition within the ferri-obertiite compositional space were found in vesicles in a pale beige silicate vein found from a basalt quarry at Mount Rothenberg, Eifel district, Germany. Associated minerals are potassic feldspar, alpha quartz paramorphic afterbeta quartz, eifelite (the second occurrence after the Caspar quarry at Bellerberg volcano, Eifel region), tridymite, rutile, roedderite and other amphiboles. The ideal formula of ferri-obertiite is ANaBNa2C(Mg3Fe3+Ti)TSi8O22WO2; the empirical formula derived for the holotype specimen from Mount Rothenberg from the results of electron-microprobe analysis and single-crystal structure refinement is A(Na0.76K0.22)∑0.98B(Na1.61Ca0.35Mn0.042+)∑2.00C(Mg3.58Mn0.112+Fe0.623+Ti0.664+Cr0.013+Zn0.01Ni0.01)∑5.00T(Si7.82Ti0.124+Al0.06)∑8.00O22W[O1.26F0.55(OH)0.19]∑2.00. The unit-cell dimensions are a = 9.7901(7), b = 17.9354(13), c = 5.2892(4)Å, β= 104.142(2)°, V = 900.58 (11) Å3. The space group is C2/m, Z = 2. Ferri-obertiite is biaxial (+), with α = 1.664, β = 1.680, γ = 1.722, all ±0.002 and 2V (meas.) = 66.4(3)o, 2V (calc.) = 64.7o.The strongest eight reflections in the powder X-ray pattern [d values (in Å), I, (hkl)] are: 2.704, 100, (151); 3.116, 76, (310); 3.388, 72, (131); 8.931, 72, (110); 2.529, 67, (202); 2.583, 39, (061); 2.160, 38, (261); 3.260, 37, (240). Both the mineral and thename have been approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (IMA 2015-079); the rock specimen has been deposited at the Museo di Mineralogia, Dipartimento di Scienze della Terra e dell'Ambiente, Universitàdegli Studi di Pavia, under the code 2015-02.

Two new barium-bearing minerals: gurimite, Ba3(VO4)2 (IMA2013-032) and hexacelsian, BaAl2Si2O8 (IMA2015-045) were discovered in veins of paralava cutting gehlenite-flamite hornfels located in the Gurim Anticline in the Negev Desert, Israel. Gurimite and hexacelsian occur in oval polymineralic inclusions in paralava and are associated with gehlenite, pseudowollastonite or wollastonite, rankinite, flamite, larnite, schorlomite, andradite, fluorapatite, fluorellestadite, kalsilite, cuspidine, aradite, zadovite and khesinite. Gurimite and hexacelsian form elongate crystals <10 μm thick. The minerals are colourless and transparent with a white streak and vitreous lustre, and have (0001) cleavage, respectively good in gurimite and very good in hexacelsian. Fracture is irregular. Density calculated using empirical formulas gave 5.044 g cm–3 for gurimite and 3.305 g cm–3 for hexacelsian. Mean refractive indexes, 1.945 and 1.561, respectively, were also calculated using the empirical formulas and the Gladstone-Dale relationship. The minerals are uniaxial and nonpleochroic. The following empirical crystal chemical formulae were assigned to holotype gurimite: (Ba2.794K0.092Ca0.084Na0.033Sr0.017)∑3.020(V1.8275+S0.0916+P0.0515+Al0.040Si0.005Fe0.0053+)∑2.017O8,and holotype hexacelsian: (Ba0.911K0.059Ca0.042Na0.010)∑1.022Al1.891Fe0.0723+Si2.034O8. The Raman spectrum of hexacelsian is similar to the one of the synthetic disordered β-BaAl2Si2O8. The Raman spectrum of gurimite is identical to that of synthetic Ba3(VO4)2. The electron back-scattered diffraction (EBSD) pattern of gurimite was fitted to the structure of its synthetic analogue with the cell parameters of R3m, a = 5.784(1),c = 21.132(1) Å, V = 612.2(2) Å3, Z = 3, giving a mean angular deviation = 0.43° (good fit). The Raman spectra of hexacelsian and its EBSD pattern suggest that natural hexacelsian corresponds to disordered synthetic β-hexacelsian P63/mcm, a = 5.2920(4) Å, c = 15.557(2) Å, α = β = 90°, γ = 120°. We suggest that after relatively fast crystallization of the main constituents of the paralava, gurimite, hexacelsian and also other Ba-bearing phases crystallized from residual melt enriched in incompatible elements that filled interstices between crystals of the main constituents.

This paper presents a microbeam (electron microprobe, Raman spectroscopic and X-ray microdiffraction) study of cancrinite-group minerals of relevance to alkaline igneous rocks. A solid solution is known to exist between cancrinite and vishnevite with the principal substitutions being CO32- by SO42- and Ca for Na. In the present study, several intermediate members of the cancrinite–vishnevite series from a syenitic intrusion at Cinder Lake (Manitoba, Canada), were used to examine how chemical variations in this series affect their spectroscopic and structural characteristics. The Cinder Lake samples deviate from the ideal cancrinite-vishnevite binary owing to the presence of cation vacancies. The only substituent elements detectable by electron microprobe are K, Sr and Fe (0.03-0.70, 0-0.85 and 0-0.45 wt.% respective oxides). The following Raman bands are present in the spectra of these minerals: ∼631 cm-1 and ∼984-986 cm-1 [SO42- vibration modes]; ∼720-774 cm -1 and ∼1045-1060 cm -1 [CO32- vibration modes]; and ∼3540 cm -1 and 3591 cm -1 [H2O vibration modes]. Our study shows a clear relationship between the chemical composition and Raman characteristics of intermediate members of the cancrinite-vishnevite series, especially with regard to stretching modes of the CO32- and SO42- anions. From cancrinite-poor (Ccn65) to cancrinite-dominant (Ccn913) compositions, the SO42- vibration modes disappear from the Raman spectrum, giving way to CO32- modes. X-ray microdiffraction results show a decrease in unit-cell parameters towards cancrinite-dominant compositions: a = 12.664 (1) Å, c = 5.173(1) Å for vishnevite (Ccn22); a = 12.613 (1) Å, c = 5.132(1) Å for cancrinite (Ccn71). Our results demonstrate that Raman spectroscopy and X-ray microdiffraction are effective for in situ identification of microscopic grains of cancrinite-vishnevite where other methods (e.g. infrared spectroscopy) are inapplicable. The petrogenetic implications of cancrinite-vishnevite relations for tracing early- to late-stage evolution of alkaline magmas are discussed.

Kamotoite-(Y) is a rare supergene product of uraninite hydration–oxidation weathering and its structure is unknown. Based on single-crystal X-ray diffraction data collected with high-redundancy using a microfocus source, kamotoite-(Y) is monoclinic, has space group P21/n,with a = 12.3525(5), b = 12.9432(5), c = 19.4409(7) Å, β = 99.857(3)°, V = 3069.8(2) Å3 and Z = 4. Crystals are pervasively twinned (two-fold rotation around [0.75 0 0.75]), giving a strongly pseudo-orthorhombic diffractionpattern. The pseudoorthorhombic pattern can be described with an orthorhombic super-cell (transformation matrix 0,1,0/1,0,1/3,0,1), approximately four times larger in volume then a true monoclinic unit cell. This unit-cell is the same as the cell given elsewhere for the structure of bijvoetite-(Y),another (REE)-containing uranyl carbonate. The successful structure solution and refinement (R = 0.044 for 6294 unique observed reflections), carried out using our choice of unit cell, as well as the superstructure refinement and comparison of the original structure data forbijvoetite-(Y) reveal that these two crystal structures are identical. The crystal structure of kamotoite-(Y) consists of electroneutral sheets of the bijvoetite-(Y) uranylanion topology and an interlayer with H2O molecules not-coordinated directly to any metal cation. Despite determinationof the kamotoite-(Y) structure and demonstration that bijvoetite-(Y) has the same structure, the identity of these two minerals cannot be proved without additional study of the holotype material.

The distribution of Au and associated trace elements in pyrite and arsenopyrite from late Archean Hutti and Hira-Buddini orogenic gold deposits, eastern Dharwar Craton, southern India was investigated by laser ablation-inductively coupled plasma-mass spectrometry. X-ray element maps acquired by electron probe microanalyser reveal oscillatory zoning of Co and As indicating the crystallization of pyrite and arsenopyrite in an episodic fluid flow regime in which fluid salinity fluctuated due to fault-valve actions. The absence of any relationship between Au and As in pyrite obviate the role of As in the incorporation of Au into pyrite, particularly here and may be generally the case in orogenic gold deposits. On the other hand, positive correlations of Au with Cu, Ag and Te suggest possible influence of these chalcophile elements in the enhanced gold concentrationin sulfides. Pb-Bi-Te-Au-Ag bearing micro-particles (<2 μm) are observed exclusively in micro-fractures and pores in arsenopyrite. The absence of replacement features and element gradient suggests direct precipitation of Pb, Bi, Te, Au and Ag from a fluid that was unreactive towards arsenopyrite. An intermittent fall in fluid pressure caused by the fault-valve action would have resulted in the sporadic precipitation of Au, Pb, Ag, Bi and Te.

Hemihedrite from the Florence Lead-Silver mine in Pinal County, Arizona, USA was first described and assigned the ideal chemical formula Pb10Zn(CrO4)6(SiO4)2F2, based upon a variety of chemical and crystal-structure analyses. The primary methods used to determine the fluorine content for hemihedrite were colorimetry, which resulted in values of F that were too high and inconsistent with the structural data, and infrared (IR) spectroscopic analysis that failed to detect OH or H2O. Our reinvestigation using electron microprobe analysis of the type material, and additional samples from the type locality, the Rat Tail claim, Arizona, and Nevada, reveals the absence of fluorine, while the presence of OH is confirmed by Raman spectroscopy. These findings suggest that the colorimetric determination of fluorine in the original description of hemihedrite probably misidentified F due to the interferences from PO4 and SO4, both found in our chemical analyses. As a consequence of these results, the study presented here proposes a redefinition of the chemical composition of hemihedrite to the ideal chemical formula Pb10Zn(CrO4)6(SiO4)2(OH)2. Hemihedrite is isotypic with iranite with substitution of Zn for Cu, and raygrantite with substitution of Cr for S. Structural data from a sample from the Rat Tail claim, Arizona, indicate that hemihedrite is triclinic in space group P1, a = 9.4891(7), b = 11.4242(8), c = 10.8155(7) Å, α = 120.368(2)°, β = 92.017(3)°, γ = 55.857(2)°, V = 784.88(9) Å3, Z= 1, consistent with previous investigations. The structure was refined from singlecrystal X-ray diffraction data to R1 = 0.022 for 5705 unique observed reflections, and the ideal chemical formula Pb10Zn(CrO4)6(SiO4)2(OH)2 was assumed during the refinement. Electron microprobe analyses of this sample yielded the empirical chemical formula Pb10.05(Zn0.91Mg0.02)∑ = 0.93(Cr5.98S0.01P0.01)∑ = 6.00 Si1.97O34H2.16 based on 34 O atoms and six (Cr + S + P) per unit cell.