The occurrence, chemical composition and structural characterisation of the new mineral kernowite, ideally Cu2Fe(AsO4)(OH)4⋅4H2O, the Fe3+-analogue of liroconite, Cu2Al(AsO4)(OH)4⋅4H2O, are described. Kernowite (IMA2020-053) occurs on specimens probably sourced from the Wheal Gorland mine, St Day, Cornwall, UK, in the cavities of a quartz-gossan rich in undifferentiated micro-crystalline grey sulfides and poorly crystalline arsenic phases including both pharmacosiderite and olivenite-group minerals. The average composition of kernowite determined from several holotype fragments by electron microprobe analysis is Cu1.88(Fe0.79Al0.09)Σ0.88(As1.12O4)(OH)4⋅3.65H2O. The structure of kernowite has been determined in monoclinic space group I2/a (a non-standard setting of C2/c) by single-crystal X-ray diffraction (SCXRD) to R1 = 0.025, wR2 = 0.051 and Goodness-of-fit = 1.112. Unit-cell parameters from SCXRD are a = 12.9243(4) Å, b = 7.5401(3) Å, c = 10.0271(3) Å, β = 91.267(3)°, V = 976.91(6) Å3 and Z = 4. The chemical formula of this crystal indicated by SCXRD from refined site-scattering is Cu2(Fe3+0.84(1)Al0.16)AsO4(OH)4⋅4H2O. The network of hydrogen bonding has been determined and is similar to that reported for liroconite from Wheal Gorland by Plumhoff et al. (2020).

Ontology deals with questions concerning what things exist, and how such things may be associated according to similarities and differences and related within a hierarchy. Ontology provides a rigorous way to develop a general definition of a mineral species. Properties may be divided into two principal groups: an intrinsic property is characteristic of the object and is independent of anything else; an extrinsic property depends on the relation between the object and other things. A universal is an entity that is common to all objects in a set. Here the objects are mineral samples, each entity is a specific property of these minerals, and the set of objects is all mineral samples of that mineral species. The key intrinsic properties of a mineral species are its name, its end-member formula and Z (the number of formula units in the unit cell), its space group and the bond topology of the end-member structure. These are also universals as they are common to all mineral samples belonging to that mineral species. An archetype is a pure form which embodies the fundamental characteristics of an object. Thus the archetype of a mineral species embodies the above set of universals. Real mineral samples of this mineral species are imperfect copies of that archetype, with a range of chemical composition defined by the boundaries between end-member formulae of this and other end members of the same bond topology. The result is a formal definition of a mineral species: A specific mineral species is the set of imperfect copies of the corresponding archetype and is defined by the following set of universals: name, end-member formula and Z, space group, and bond topology of the end-member structure, with the range of chemical composition limited by the compositional boundaries between end members with the same bond topology.

We report the crystal structures of eight new synthetic multinary Rb–Cu sulfates representing four new structure types: δ-Rb2Cu(SO4)2, γ-RbNaCu(SO4)2, γ-RbKCu(SO4)2, Rb2Cu2(SO4)3, Rb2Cu2(SO4)3(H2O), β-Rb2Cu(SO4)Cl2, β-Rb4Cu4O2(SO4)4⋅(Cu0.83Rb0.17Cl) and Rb2Cu5O(SO4)5. The determination of their crystal structures significantly expands the family of anhydrous copper sulfates. Some of the anhydrous rubidium copper sulfates obtained turned out to be isostructural to known compounds and minerals. Rb2Cu5O(SO4)5 is isostructural to cesiodymite, CsKCu5O(SO4)5 and cryptochalcite, K2Cu5O(SO4)5. Rb2Cu2(SO4)3 also shows an example of crystallisation in the already known structure type first observed for synthetic K2Cu2(SO4)3. ‘Hydrolangbeinite’, Rb2Cu2(SO4)3(H2O), was formed as a result of a minor hydration of the initial mixture of reagents.

The minerals and synthetic framework compounds of the A2Cu(SO4)2 series demonstrate a vivid example of morphotropism with the formation of structural types depending on the size of the cations residing in the cavities of the [Cu(SO4)2]2– open framework. To date, five types (α, β, γ, δ and ε) can be distinguished. We propose to call this series of compounds ‘saranchinaite-type’, as the stoichiometry A2Cu(SO4)2 was first encountered during the discovery and description of saranchinaite, Na2Cu(SO4)2.

The discovery of β-Rb2Cu(SO4)Cl2, a new monoclinic polymorph of chlorothionite, seems to be of particular interest considering the recently discovered interesting magnetic properties of synthetic K2Cu(SO4)X2 (X = Cl and Br) and Na2Cu(SO4)Cl2.

In these new structural architectures, a number of features have been revealed that were seldom observed previously. The first is the bidentate coordination of the sulfate tetrahedron via edge-sharing with the Cu2+-centred coordination polyhedron. Until recently, such coordination was known only for the chlorothionite structure. The second is formation of ‘high-coordinate’ CuO7 polyhedra. The structures of the new compounds suggest that such coordination is not in fact so uncommon, at least among anhydrous alkali copper sulfates. All of the described features clearly indicate the importance of further systematic studies of anhydrous copper-sulfate systems. Their exploration, particularly of the new copper-oxide substructures with new coordination environments, is highly likely to lead to new potentially interesting magnetic properties due to the unusual arrangements of magnetically active Cu2+ cations.

In addition to experimental details on the synthesis of rubidium analogues of anhydrous potassium and sodium sulfates, this work also provides an analysis and a brief review of the geochemistry of rubidium in volcanic environments.

Quartz (trigonal, low-temperature α-quartz) is the most important polymorph of the silica (SiO2) group and one of the purest minerals in the Earth crust. The mineralogy and mineral chemistry of quartz are determined mainly by its defect structure. Certain point defects, dislocations and micro-inclusions can be incorporated into quartz during crystallisation under various thermodynamic conditions and by secondary processes such as alteration, irradiation, diagenesis or metamorphism. The resulting real structure is a fingerprint of the specific physicochemical environment of quartz formation and also determines the quality and applications of SiO2 raw materials. Point defects in quartz can be related to imperfections associated with silicon or oxygen vacancies (intrinsic defects), to different types of displaced atoms, and/or to the incorporation of foreign ions in lattice sites and interstitial positions (extrinsic defects). Due to mismatch in charges and ionic radii only a limited number of ions can substitute for Si4+ in the crystal lattice or can be incorporated in interstitial positions. Therefore, most impurity elements in quartz are present at concentrations below 1 ppm. The structural incorporation in a regular Si4+ lattice site has been proven for Al3+, Ga3+, Fe3+, B3+, Ge4+, Ti4+, P5+ and H+, of which Al3+ is by far the most common and typically the most abundant. Unambiguous detection and characterisation of defect structures in quartz are a technical challenge and can only be successfully realised by a combination of advanced analytical methods such as electron paramagnetic resonance (EPR) spectroscopy, cathodoluminescence (CL) microscopy and spectroscopy as well as spatially resolved trace-element analysis such as laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and secondary-ion mass spectrometry (SIMS). The present paper presents a review of the state-of-the-art knowledge concerning the mineralogy and mineral-chemistry of quartz and illustrates important geological implications of the properties of quartz.

Pyrrhotite Fe1–xS is the main sulfide component of platinum-group element (PGE) ores and commonly contains from a few tenths to a few dozen ppm of disseminated Pt. Here we report an X-ray absorption spectroscopy investigation into the state of Pt in synthetic pyrrhotite in combination with theoretical spectra modelling. The pyrrhotite crystals were obtained by means of the salt flux technique, using a eutectic mixture of alkali metal halides as the transport media. Analysis of the chemical composition of synthesised crystals showed that an increase of the temperature and sulfur fugacity yields higher concentrations of Pt in pyrrhotite. The Pt content reached 0.6 wt.% at the maximum temperature and sulfur fugacity (t = 720°C, log $f_{{\rm S}_ 2}$ = –0.1) achieved in a Pt-saturated system. X-ray absorption near-edge structure (XANES) analysis of Pt L3-edge spectra revealed that Pt is present in pyrrhotite in the 4+ and 2+ ‘formal’ oxidation states. Theoretical modelling of XANES and interpretation of extended X-ray absorption fine structure (EXAFS) spectra showed that Pt4+ substitutes for Fe in the crystal lattice of pyrrhotite, whereas Pt2+ forms PtS-like clusters disseminated in the pyrrhotite matrix. Atoms of isomorphous Pt4+ are surrounded by 6 S atoms at a distance of 2.39 ± 0.02 Å. According to theoretical simulations using the FDMNES program, the second coordination sphere of the solid-solution Pt contains one vacancy in the Fe sublattice within the Fe-layer. The Pt2+S-like clusters can be considered as a quench product. High sulfur fugacity stabilises the solid-solution Pt and prevents the formation of the PtS-like clusters during cooling. The maximum content of the solid-solution Pt in pyrrhotite is ca. 50 times lower than in pyrite and can be approximated by a straight line in the log C(Pt) vs. 1/T plot, it increases from 1 ppm at 350°C to 3 wt.% at 900°C.

The paper presents detailed mineralogical and structural characteristics of novograblenovite that occurs abundantly on a burning coal dump at Radlin, Upper Silesia, Poland. Our results indicate that NH4MgCl3⋅6H2O is the proper formula of this mineral. The thermal behaviour of novograblenovite shows a two-step dehydration at 155 and 193°C and sublimation of NH4Cl at 341°C. A Raman spectrum, obtained for the first time, reveals the normal modes of H2O and NH4+ vibrations. The crystal structure of novograblenovite was refined on the basis of high quality X-ray diffraction data. The final discrepancy factor wR2 was 0.0567 for 94 parameters and 1464 independent reflections. The structure has a monoclinic C2/c space group symmetry with the following unit cell parameters: a = 9.2709(3) Å, b = 9.5361(2) Å, c = 13.2741(4) Å and β = 90.054(3)°. We were able to specify the architecture of the disordered NH4+ cation located at the symmetry centre. This led to reasonable parameters for the H-bonding formed by this cation. In carnallite the K+ cations occupy an identical space to the ammonium ion in novograblenovite, but when embedded into the latter crystal structure it is bound less tightly. Voids occupy 14% of the space in the novograblenovite crystal structure. Novograblenovite is exactly the same phase as the ‘redikortsevite’ described previously from Chelabinsk coal dumps and this informally introduced name should be abandoned.

This work is the first in situ U–Pb geochronological study of perovskite and calcic garnet (andradite) from the Guli complex in the Maimecha–Kotuy alkaline province (Polar Siberia, Russia). The U–Pb isotopic compositions of perovskite from contact zones of the two carbonatite stocks (Southern and Northern) and from jacupirangite separating the stocks were determined by laser-ablation inductively-coupled-plasma mass-spectrometry (LA-ICPMS) and isotope-dilution thermal-ionisation mass-spectrometry (ID-TIMS). The LA-ICPMS and ID-TIMS data for perovskite from the Northern carbonatite stock are in good agreement, yielding 206Pb/238U ages of 250.4 ± 1.1 Ma and 249 ± 2 Ma, respectively. These ages are also within the analytical uncertainty from the ID-TIMS results for perovskite from jacupirangites (250 ± 1 Ma). The LA-ICPMS results for perovskite from the Southern carbonatite stock indicate its somewhat older age (255.3 ± 2.4 Ma), implying the possibility of small-volume mantle magmatism predating the eruption of the Siberian flood basalts at ca. 252–251 Ma. This interpretation is supported by reports of pre-flood magmatism elsewhere in eastern Siberia. Andradite crystals from the contact between the Southern stock and metasomatised melilitolite were analysed by ID-TIMS. These measurements are inconclusive (247 ± 6 Ma) and could not be used to constrain further the timing of carbonatitic magmatism in the southern part of the complex. The present contribution also presents a refined methodology for LA-ICPMS geochronological studies of perovskite with elevated levels of common lead, and addresses some of the problems with previously proposed calibration standards.

Several text symbol lists for common rock-forming minerals have been published over the last 40 years, but no internationally agreed standard has yet been established. This contribution presents the first International Mineralogical Association (IMA) Commission on New Minerals, Nomenclature and Classification (CNMNC) approved collection of 5744 mineral name abbreviations by combining four methods of nomenclature based on the Kretz symbol approach. The collection incorporates 991 previously defined abbreviations for mineral groups and species and presents a further 4753 new symbols that cover all currently listed IMA minerals. Adopting IMA–CNMNC approved symbols is considered a necessary step in standardising abbreviations by employing a system compatible with that used for symbolising the chemical elements.

Thermessaite-(NH4), ideally (NH4)2AlF3(SO4), is a new mineral found as a medium- to high-temperature (~250–300°C) fumarole encrustation at the rim of La Fossa crater, Vulcano, Aeolian Islands, Italy. The mineral deposited as aggregates of minute (<0.2 mm) sharp prismatic crystals on the surface of a pyroclastic breccia in association with thermessaite, sulfur, arcanite, mascagnite, and intermediate members of the arcanite–mascagnite series.

The new mineral is colourless to white, transparent, non-fluorescent, has a vitreous lustre, and a white streak. The calculated density is 2.185 g/cm3. Thermessaite-(NH4) is orthorhombic, space group Pbcn, with a = 11.3005(3) Å, b = 8.6125(3) Å, c = 6.8501(2) Å, V = 666.69(4) Å3 and Z = 4. The eight strongest reflections in the powder X-ray diffraction data [d in Å (I)(hkl)] are: 5.65 (100)(200), 4.84 (89)(111), 6.85 (74)(110), 3.06 (56)(112), 3.06 (53)(221), 3.08 (47)(311), 2.68 (28)(022) and 2.78 (26)(130). The average chemical composition, determined by quantitative SEM-EDS (N by difference), is (wt.%): K2O 3.38, Al2O3 25.35, SO3 36.58, F 26.12, (NH4)2O 22.47, O = F –11.00, total 102.90. The empirical chemical formula, calculated on the basis of 7 anions per formula unit, is [(NH4)1.85K0.15]Σ2.00Al1.06F2.94S0.98O3.06. The crystal structure, determined from single-crystal X-ray diffraction data [R(F) = 0.0367], is characterised by corner-sharing AlF4O2 octahedra which form [001] octahedral chains by sharing two trans fluoride atoms [Al–F2 = 1.8394(6) Å]. Non-bridging Al–F1 distances are shorter [1.756(1) Å]. The two trans oxygen atoms [Al–O = 1.920(2) Å] are from SO4 tetrahedra. NH4+ ions occur in layers parallel to (100) which alternate regularly with (100) layers containing ribbons of corner-sharing AlF4O2 octahedra and associated SO4 groups. The NH4+ ions are surrounded by five oxygen atoms and by four fluorine atoms. The mineral is named as the (NH4)-analogue of thermessaite, K2AlF3(SO4), and corresponds to an anthropogenic phase found in the burning Anna I coal dump of the Anna mine, Aachen, Germany. Both mineral and mineral name have been approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2011-077).

A major debris flow, the Trig Point Hill flow, originating from Kerimasi volcano (Tanzania) contains numerous blocks of extrusive/pyroclastic carbonatites similar to those exposed at the rim of the currently inactive crater. The blocks of calcite carbonatite consist of: (1) large clasts of corroded and altered coarse grained calcite; (2) primary prismatic inclusion bearing phenocrystal calcite; and (3) a matrix consisting primarily of fine-grained prismatic calcite. The large clasts are inclusion free and exhibit a ‘corduroy-like’ texture resulting from solution along cleavage planes. The resulting voids are filled by brown Fe–Mn hydroxides/oxides and secondary calcite. The prismatic or lath-shaped phenocrystal calcite is not altered and contains melt inclusions consisting principally of primary Na–Ca carbonates which contain earlier-formed crystals of monticellite, periclase, apatite, Mn–Mg-magnetite, Mn–Fe-sphalerite and Nb-perovskite. Individual Na–Ca carbonate inclusions are of uniform composition, and the overall range of all inclusions analysed (wt.%) is from 28.7 to 35.9 CaO; 16.7–23.6 Na2O; 0.5–2.8 K2O, with minor SO3 (1.1–2.2) and SrO (0.34–1.0). The Na–Ca carbonate compositions are similar to that of shortite, although this phase is not present. The Na–Ca carbonates are considered to be primary deuteric phases and not secondary minerals formed after nyerereite. Monticellite shows limited compositional variation and contains 2–4 wt.% MnO and 12 wt.% FeO and is Mn-poor relative to monticellite in Oldoinyo Lengai natrocarbonatite. Periclase is Fe-bearing with up to 13 wt.% FeO. Spinels are Cr-free, Mn-poor and belong to the magnetite–magnesioferrite series in contrast to Mn-rich spinels of the magnetite–jacobsite series occurring in Oldoinyo Lengai natrocarbonatite. The matrix in which the ‘corduroy’ clasts and phenocrystal calcite are set consists of closely packed small prisms of calcite lacking melt inclusions, with interstitial fine-grained apatite, baryte, strontianite and minor fluorite. Pore spaces are filled with secondary Mn–Fe hydroxides/oxides, anhydrite and gypsum. The hypothesis that flow-aligned calcite in volcanic calciocarbonatites from Kerimasi, Tinderet, Homa and Catanda is altered nyerereite is discussed and it is considered that these calcite are either primary phases or altered melilite. The nyerereite alteration hypothesis is discussed with respect to the volumetric and compositional aspects of pseudomorphism by dissolution–precipitation replacement mechanisms. This study concludes that none of the volcanic calciocarbonatites containing flow-aligned calcite phenocrysts are altered natrocarbonatite.

Calcification within breast cancer is a diagnostically significant radiological feature that generally consists of hydroxylapatite. Samples from 30 cases of breast carcinoma with calcification were investigated using optical microscopy, energy-dispersive X-ray analysis, transmission-electron microscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, synchrotron radiation X-ray diffraction and X-ray fluorescence. Under optical microscopy, the calcifications were found to consist of either irregular aggregates with widths > 200 μm or spherical aggregates similar to psammoma bodies with an average diameter of 30 μm. Transmission-electron microscopy showed that short columnar or dumbbell-shaped crystals with widths of 10–15 nm and lengths of 20–50 nm were the most common morphology; spherical aggregates (~1 μm in diameter) with amorphous coatings of fibrous nanocrystals were also observed. Results indicated that hydroxylapatite was the dominant mineral phase in the calcifications, and both CO32– and cation substitutions (Na, Mg, Zn, Fe, Sr, Cu and Mn) were present in the hydroxylapatite structure. Fourier-transform infrared spectra show peaks at 872 and 880 cm–1 indicating that CO32– substituted both the OH– (A type) and PO43– (B type) sites of hydroxylapatite, making it an A and B mixed type. The ratio of B- to A-type substitution was estimated in the range of 1.1–18.7 from the ratio of peak intensities (I872/I880), accompanied with CO32– contents from 1.1% to 14.5%. Trace arsenic, detected in situ by synchrotron radiation X-ray fluorescence was found to be distributed uniformly in the calcifications in the form of AsO43– substituting for PO43–. It is therefore proposed that identifying these trace elements in breast cancer calcifications may be promising for future clinical diagnostics.

The weathering of platinum-group element (PGE) deposits presents unusual problems, especially in the very active environment of lateritic weathering under tropical conditions. There is clear evidence of the destruction of platinum-group minerals (PGM) to form PGE oxides, or fine intergrowths between relict PGM and iron oxides or hydroxides, as an intermediate stage during weathering. The PGE released by weathering are transported in solution with the more soluble Pd species remaining in solution and travelling further than the less soluble Pt species. The presence of PGM in the laterite differing in mineralogy, mineral assemblage and size from those in the primary rock is difficult to explain, especially when they show secondary textures. Differing interpretations have created controversy. Are alluvial PGM derived unaltered from the primary rock where they are rare and, therefore, not encountered by standard petrographic examination? Is it possible that they could have developed in the laterite by some process that we do not yet fully understand? Some favourable genetic conditions have been outlined and debated. For more than 100 years authors have reported secondary ore textures and recently proposed a biogenic origin. Frank Reith and his co-workers provided evidence of a process involving metallophillic bacteria which, for the first time, demonstrates PGM growth in the laboratory under supergene conditions. Their work shows that a mechanism for supergene growth (‘neoformation’) can occur, which offers a new field of study of the appropriate Eh, pH, $f_{{\rm O}_ 2}$ conditions and organic and bacterial reactions that could permit supergene growth.

Whole-rock major- and trace-element data are presented on a sample collection from the >3 Ga Amikoq Layered Complex (ALC), and hosting amphibolites within the Mesoarchean Akia terrane, SW Greenland. The lithologies range from leuconorite to melanorite/feldspathic orthopyroxenite, orthopyroxenite to harzburgite through to dunite, and tholeiitic basaltic–picritic mafic host rocks. The Amikoq Layered Complex samples are primitive (Mg#: 65–89) with elevated Ni and Cr contents. However, the absence of troctolitic lithologies and the presence of two orthopyroxene compositional trends, suggests that the successions might not be comagmatic. On the basis of trace-element cumulate models, relatively low Ni contents and minor negative Sr-Eu anomalies in some high-Ti ultramafic rocks, it is not possible to exclude a petrogenesis related to a melt similar to that of the mafic host-rocks. Ultramafic samples with U-shaped trace-element distribution patterns are petrogenetically related to the noritic sequences, either through cumulus mineral accumulation or melt-rock reactions. Assimilation-fractional-crystallisation modelling of melanorites nevertheless require the parental melt to have been contaminated/mixed with a component of island-arc-like tholeiite affinity. A boninite-like parental melt might have been derived from the subcontinental lithospheric mantle of the Akia terrane, or alternatively via assimilation of an ultramafic parental melt with island-arc-like tholeiite. Given the complex geological evolution and high-grade metamorphic overprint of the Amikoq Layered Complex, we are unable to differentiate between the two models.

Whiteite-(MnMnMn), Mn2+Mn2+Mn2+2Al2(PO4)4(OH)2⋅8H2O, is a new whiteite-subgroup member of the jahnsite group from the Foote Lithium Company mine, Kings Mountain district, Cleveland County, North Carolina, USA. It was found in small vugs of partially oxidised pegmatite minerals on the East dump of the mine, in association with eosphorite, hureaulite, fairfieldite, mangangordonite, whiteite-(CaMnMn) and jasonsmithite. It occurs as sugary aggregates of blade-like crystals up to 0.1 mm long and as epitaxial overgrowths on whiteite-(CaMnMn). The crystals are colourless to very pale brown, with a vitreous lustre and a white streak. The blades are flattened on {001} and elongated along [010], with poor cleavage on {001}. The calculated density is 2.82 g⋅cm–3. Optically it is biaxial (–) with α = 1.599(2), β = 1.605(2), γ = 1.609(2) (white light); 2V (calc.) = 78.2°, having no observable dispersion or pleochroism, and with orientation X = b. Electron microprobe analyses and structure refinement gave the empirical formula (Mn2+0.59Ca0.38Na0.03)Σ1.00Mn1.00(Mn2+1.04Fe3+0.58Fe2+0.23Zn0.16Mg0.08)Σ2.09Al2.04(PO4)3.89(OH)3.18(H2O)7.26. Whiteite-(MnMnMn) is monoclinic, P2/a, a = 15.024(3) Å, b = 6.9470(14) Å, c = 9.999(2) Å, β = 110.71(3)°, V = 976.2(4) Å3 and Z = 2. The crystal structure was refined using synchrotron single-crystal data to wRobs = 0.057 for 2014 reflections with I > 3σ(I). Site occupancy refinements confirm the ordering of dominant Mn in the X, M1 and M2 sites of the general jahnsite-group formula XM1(M2)2(M3)2(H2O)8(OH)2(PO4)4. A review of published crystallochemical data for jahnsite-group minerals shows a consistent chemical pressure effect in these minerals, manifested as a contraction of the unit-cell parameter, a, as the mean size of the X and M1 site cations increases. This is analogous to negative thermal expansion, but with increasing cation size, rather than heating, inducing octahedral rotations that result in an anisotropic contraction of the unit cell.

Galeaclolusite, [Al6(AsO4)3(OH)9(H2O)4]⋅8H2O, is a new secondary hydrated aluminium arsenate mineral from Cap Garonne, Var, France. It forms crusts and spheroids of white fibres up to 50 μm long by 0.4 μm wide and only 0.1 μm thick. The fibres are elongated along [001] and flattened on (100). The calculated density is 2.27 g⋅cm–3. Optically, galeaclolusite is biaxial with α = 1.550(5), β not determined, γ = 1.570(5) (white light) and partial orientation: Z = c (fibre axis). Electron microprobe analyses coupled with crystal structure refinement results gives an empirical formula based on 33 O atoms of Al5.72Si0.08As2.88O33H34.12. Galeaclolusite is orthorhombic, Pnma, with a = 19.855(4), b = 17.6933(11), c = 7.7799(5) Å, V = 2733.0(7) Å3 and Z = 4. The crystal structure of galeaclolusite was established from its close relationship to bulachite and refined using synchrotron powder X-ray diffraction data. It is based on heteropolyhedral layers, parallel to (100), of composition Al6(AsO4)3(OH)9(H2O)4 and with H-bonded H2O between the layers. The layers contain [001] spiral chains of edge-shared octahedra, decorated with corner-connected AsO4 tetrahedra, that are the same as in the mineral liskeardite.

Manganese (Mn) oxides have been prevalent on Earth since before the Great Oxidation Event and the Mn cycle is one of the most important biogeochemical processes on the Earth's surface. In sunlit natural environments, the photochemistry of Mn oxides has been discovered to enable solar energy harvesting and conversion in both geological and biological systems. One of the most widespread Mn oxides is birnessite, which is a semiconducting layered mineral that actively drives Mn photochemical cycling in Nature. The oxygen-evolving centre in biological photosystem II (PSII) is also a Mn-cluster of Mn4CaO5, which transforms into a birnessite-like structure during the photocatalytic oxygen evolution process. This phenomenon draws the potential parallel of Mn-functioned photoreactions between the organic and inorganic world. The Mn photoredox cycling involves both the photo-oxidation of Mn(II) and the photoreductive dissolution of Mn(IV/III) oxides. In Nature, the occurrence of Mn(IV/III) photoreduction is usually accompanied with the oxidative degradation of natural organics. For Mn(II) oxidation into Mn oxides, mechanisms of biological catalysis mediated by microorganisms (such as Pseudomonas putida and Bacillus species) and abiotic photoreactions by semiconducting minerals or reactive oxygen species have both been proposed. In particular, anaerobic Mn(II) photo-oxidation processes have been demonstrated experimentally, which shed light on Mn oxide emergence before atmospheric oxygenation on Earth. This review provides a comprehensive and up-to-date elaboration of Mn oxide photoredox cycling in Nature, and gives brand-new insight into the photochemical properties of semiconducting Mn oxides widespread on the Earth's surface.

The Neoproterozoic Lofdal alkaline carbonatite complex consists of a swarm of carbonatite dykes and two plugs of calcite carbonatite known as the ‘Main’ and ‘Emanya’ carbonatite intrusions, with associated dykes and plugs of phonolite, syenite, rare gabbro, anorthosite and quartz-feldspar porphyry. In the unaltered Main Intrusion calcite carbonatite the principal rare-earth host is burbankite. As burbankite typically forms in a magmatic environment, close to the carbohydrothermal transition, this has considerable petrogenetic significance. Compositional and textural features of Lofdal calcite carbonatites indicate that burbankite formed syngenetically with the host calcite at the magmatic stage of carbonatite evolution. The early crystallisation of burbankite provides evidence that the carbonatitic magma was enriched in Na, Sr, Ba and light rare earth elements. In common with other carbonatites, the Lofdal burbankite was variably affected by alteration to produce a complex secondary mineral assemblage. Different stages of burbankite alteration are observed, from completely fresh blebs and hexagonal crystals through to complete pseudomorphs, consisting of carbocernaite, ancylite, cordylite, strontianite, celestine, parisite and baryte. Although most research and exploration at Lofdal has focused on xenotime-bearing carbonatite dykes and wall-rock alteration, this complex also contains a more typical calcite carbonatite enriched in light rare earth elements and their alteration products.