To investigate the central electrode artefact effect of different ion chambers in the verification phantom using the dose calculation algorithms Analytical Anisotropic Algorithm (AAA) and Acuros XB.

The dosimetric study was conducted using an in-house fabricated polymethyl methacrylate head phantom. The treatment planning system (TPS)-calculated doses in the phantom with detectors were compared against the dummy detector fillets using AAA and Acuros XB algorithm. The planned and measured doses were compared for the study.

The mean percentage variation in volumetric-modulated arc therapy plans using Acuros XB and the measurement in the head phantom are statistically significant (p-value = 0.001) for FC65 and CC13 chambers. In small volume chambers (A14SL and CC01), the measured and TPS-calculated dose shows a good agreement.

The study confirmed the CT set of the phantom with detectors (FC65 and CC13) give more artefacts/heterogeneity caused a significant variation in dose calculation using Acuros XB. Therefore, the study suggests a method of using phantom CT set with the dummy detector for mean dose calculation for the Acuros XB algorithm.

In recent years, there has been a spectacular development in nanomedicine field with new nanoparticles for diagnosis and cancer therapy. Although most researchers have been always interested in gold nanoparticles (GNPs)

In the present work we present a comparison between the use of bio-nanomaterials in proton therapy.

Consequently, our results show that platinum nanoparticles (PtNPs) present an interesting advantages comparing with GNPs and silver nanoparticles. On the other hand, the use of PtNPs facilitates in a considerable way the proton therapy.

Accurate localisation of target position is crucial when using techniques with sharp dose fall off such as volumetric modulated arc therapy (VMAT). Gold seed fiducial markers have been used for target localisation in image-guided radiation therapy for various tumors including intact prostate cancers. However, their role for target localisation in post-prostatectomy radiotherapy is unclear. This study was undertaken to determine the feasibility and effectiveness of gold seed fiducial markers in patients undergoing prostate bed VMAT.

The institutional radiation oncology database was used to analyse the treatment data of 18 post-prostatectomy patients with implanted gold seed fiducial markers. The shifts of the fiducial markers were reviewed, tabulated and statistically analysed.

Three hundred and eighty-six orthogonal pair images for 18 patients were reviewed. Specifically, the average gold seed fiducial shifts were 0·34 cm in the superior–inferior (S/I) axis (0·31 SD), 0·31 cm (0·29 SD) in the anterior–posterior (A/P) axis and 0·28 cm (0·25 SD) in the lateral axis (R/L). As a result, the 95% probability of fiducial marker displacement was 0·96 cm in the S/I, 0·89 cm in the A/P and 0·78 cm in the R/L axes. The most frequent shifts occurred in the inferior, left and posterior directions. The percentage of shifts more than 0·5 cm were 19·74, 21·56 and 12·47% for the S/I, A/P and R/L axes, respectively.

In the absence of fiducial markers, non-uniform planning target volume (PTV) margins of 1 cm for S/I, 9 mm for A/P and 8 mm for the lateral direction are necessary for target localisation in post-prostatectomy radiotherapy. By improving prostate bed localisation, gold seed fiducial markers can decrease PTV margins, reduce normal tissue radiation exposure and allow for dose-escalated and/or hypofractionated radiotherapy to be considered in appropriate clinical scenarios.

The treatment planning system (TPS) plays a key role in radiotherapy treatments; it is responsible for the accurate determination of the monitor unit (MU) needed to be delivered to treat a patient with cancer. The main goal of radiotherapy is to sterilise the tumour; however, any imprecise dose delivered could lead to deadly consequences. The TPS has a quality assurance tool, an independent program to double check the MU, evaluate patient plan correctness and search for any potential error.

In this work, a comparison was carried out between a MU calculated by TPS and an independent in-house-developed monitor unit calculation program (MUCP). The program, written in Cplusplus (C++ Object-Oriented), requires a database of several measured quantities and uses a recently developed physically based method for field equivalence calculation. The ROOT CERN data analysis library has been used to establish fit functions, to extend MUCP use to a variety of photon beams. This study presents a new approach to checking MU correctness calculated by the TPS for a water-like tissue equivalent medium, using our MUCP, as the majority of previous studies on the MU independent checks were based on the Clarkson method. To evaluate each irradiated region, four calculation points corresponding to relative depths under the water phantom were tested for several symmetric, asymmetric, irregular symmetric and asymmetric field cases. A comparison of MU for each radiation fields from readings of the TPS and the MUCP was undertaken.

A satisfactory agreement has been obtained and within the required standards (3%). Additional experimental measurements of dose deposited in a water phantom showed a deviation of <1·6%.

The MUCP is a useful tool for basic and complex MU verification for 3D conformal radiation therapy plans.

Re-planning mid-treatment, with the adjustment of target volumes, has been performed as part of the normal workflow at our institution. We sought to quantify the benefit of this approach and identify factors to optimise plan adaptive strategies.

Patients with locally advanced oropharyngeal cancer treated to 70 Gy with concurrent chemoradiation (CCRT) on TomoTherapy® who underwent re-planning during the treatment were eligible. Survival and prognostic factors were evaluated with Kaplan–Meier and Cox proportional hazards, two-side p-value <0·05 significant.

Forty-two patients were identified with Stage III (n = 5), IVA (n = 34) and IVB (n = 3) [AJCC 7th] disease. Median re-planning dose was 40 Gy (14–60 Gy). Median change in mean total parotid dose was reduction of 1 Gy (range –7·5 Gy to +13·9 Gy). The volume of PTV70 and PTV60 receiving 99% of the prescribed (V99) dose was increased by 2·2% (–3·3 to +16·6%) and 1·9% (–11·5 to +12·6%) by re-planning. As a continuous variable, increasing per cent nodal regression was associated with the improved disease control in a multivariate model including stage, pack years smoking and human papilloma viral (HPV) status (HR: 0·85, 0·71–0·99, p = 0·05).

Adaptive planning generates a superior plan for the majority of patients, but there is modest overall parotid gland sparing.

To study 2D and 3D dosimetric values for bladder and rectum, and the influence of bladder volume on bladder dose in high dose rate (HDR) intracavitary brachytherapy (ICBT). The large patient data incorporated in this study would better represent the inherent variations in many parameters affecting dosimetry in HDR-ICBT.

We prospectively collected data for 103 consecutive cervical cancer patients (over 310 HDR fractions) undergoing CT-based HDR-ICBT at our centre. Correlation among bladder and rectum maximum volume doses and corresponding International Commission on Radiation Units and Measurement (ICRU) point doses were estimated and analysed. Impact of bladder volume on bladder maximum dose was assessed.

The ICRU point doses to bladder and rectum varied from the volumetric doses to these organs. Further, bladder volume poorly correlated with bladder maximum dose for volume variations encountered in the clinical practice at our centre.

ICRU point doses to bladder and rectum are less likely to correlate with long-term toxicities to these organs. Further, in clinical practice where inter-fraction bladder volume does not vary widely there is no correlation between bladder volume and bladder dose.

Use of molecular information to guide clinical management of thoracic liposarcoma following resection.

We present a case of a large liposarcoma of the left hemithorax. Initial biopsy consistent with lipoma however following resection pathology showed well-differentiated liposarcoma. Clinical data and molecular information including MDM2 from the tumour were employed in decision making regarding subsequent adjuvant radiation therapy versus close observation.

Improved molecular characterisation has increased the precision of histological diagnoses and prediction of outcomes for many cancers. These may continue to help guide and strengthen clinical decision making and recommendations as they pertain to adjuvant therapy versus observation in the case of this patient.

To determine which concomitant boost technique is dosimetrically superior in the treatment of breast cancer; volumetric-modulated arc therapy (VMAT) or fixed field intensity-modulated radiotherapy (ff-IMRT).

In total, 30 breast patients were re-planned with both VMAT and fixed field concomitant boost intensity-modulated radiotherapy techniques. A hybrid technique was used delivering 80% of the dose through tangential beams and 20% through an integrated boost. A two-tailed t-test sample for means was used to compare the dosimetric differences between the techniques.

Maximum dose was statistically lower for VMAT; 103·2 versus 103·7% for ff-IMRT along with statistically lower V2 Gy doses to the contralateral lung (0·7 versus 1·6%) and heart for both left- (19·0%/22·6%), and right- (5·5%/8·8%) sided patients, respectively. ff-IMRT boasted significantly lower ipsilateral lung V20, V18 and V10 Gy (7·9/8·6/13·1 versus 8·1/8·8/13·4%) than VMAT, respectively. No differences were found with minimum coverage, mean dose and V5 Gy to all organs at risk (OARs).

VMAT and ff-IMRT techniques demonstrate excellent target coverage and OAR sparing facilitated by the hybrid planning technique and deep inspiration breath hold. There is no obvious dosimetrically superior option between the two techniques. Reduced treatment times with VMAT make it more desirable to implement clinically.

Brain metastases (BM) are common in patients with HER2-positive and triple-negative breast cancer. In this study we aim to report clinical outcomes with LINAC-based stereotactic radiosurgery/radiotherapy (SRS/SRT) for BM in patients of breast cancer.

Clinical and dosimetric records of breast cancer patients treated for BM at our institute between May, 2015 and December, 2019 were retrospectively reviewed. Patients of previously treated or newly diagnosed breast cancer with at least a radiological diagnosis of BM; 1–4 in number, ≤3·5 cm in maximum dimension, with a Karnofsky Performance Score of ≥60 were taken up for treatment with SRS. SRT was generally considered if a tumour was >3·5 cm in diameter, near a critical or eloquent structure, or if the proximity of moderately sized tumours would lead to dose bridging in a single-fraction SRS plan. The median prescribed SRS dose was 15 Gy (range 7–24 Gy) and SRT dose was 27 Gy in 3 fractions.

Clinical assessment and MR imaging was done at 6 weeks post-SRS and then every 3 months thereafter. Intracranial progression-free survival (PFS) and overall survival (OS) were calculated using Kaplan–Meier method and subgroups were compared using log rank test.

Total, 40 tumours were treated in 31 patients. The median tumour diameter was 2·3 cm (range 1·0–4·6 cm). SRS and SRT were delivered in 27 and 4 patients, respectively. SRS/SRT was given as a boost to whole brain radiotherapy (WBRT) in four patients and as salvage for progression after WBRT in six patients. In general, nine patients underwent prior surgery. The median follow-up was 7·9 months (0·2–34 months). Twenty (64·5%) patients developed local recurrence, 10 (32·3%) patients developed distant intracranial relapse and 7 patients had both local and distant intracranial relapse. The estimated local control at 6 months and 1 year was 48 and 35%, respectively. Median intracranial progression free survival (PFS) was 3·73 months (range 0·2–25 months). Median intracranial PFS was 3·02 months in patients who received SRS alone or as boost after WBRT, while it was 4·27 months in those who received SRS as salvage after WBRT (p = 0·793). No difference in intracranial PFS was observed with or without prior surgery (p = 0·410). Median overall survival (OS) was 21·7 months (range 0·2–34 months) for the entire cohort. Patients who received prior WBRT had a poor OS (13·31 months) as compared to SRS alone (21·4 months; p = 0·699).

In patients with BM after breast cancer SRS alone, WBRT + SRS and surgery + SRS had comparable PFS and OS.

Stereotactic radiosurgery (SRS) has proven itself as an effective tool in the treatment of intracranial lesions. Image-guided high dose single fraction treatments have the potential to deliver ablative doses to tumours; however, treatment times can be long. Flattening filter free (FFF) beams are available on most modern linacs and offer a higher dose rate compared to conventional flattened beams which should reduce treatment times. This study aimed to compare 6 MV FFF and 10 MV FFF to a 6 MV flattened beam for single fraction dynamic conformal arc SRS for a Varian Truebeam linac.

In total, 21 individual clinical treatment plans for 21 brain metastases treated with 6 MV were retrospectively replanned using both 6 MV FFF and 10 MV FFF. Plan quality and efficiency metrics were evaluated by analysing dose coverage, dose conformity, dose gradients, dose to normal brain, beam-on-time (BOT), treatment time and monitor units.

FFF resulted in a significant reduction in median BOT for both 6 MV FFF (57·9%; p < 0·001) and 10 MV FFF (76·3%; p < 0·001) which led to reductions in treatment times of 16·8 and 21·5% respectively. However, 6 MV FFF showed superior normal brain dose sparing (p < 0·001) and dose gradient (p < 0·001) compared to 10 MV FFF. No differences were observed for conformity.

6 MV FFF offers a significant reduction in average treatment time compared to 6 MV (3·7 minutes; p = 0·002) while maintaining plan quality.

Patient wait time for every single fraction of every patient treated at our centre for the past year has been presented in this study. The waiting time data were analysed across different treatment sites and modalities.

Between March 2021 and March 2022, all patients and their corresponding recorded measurements of waiting time were analysed. Times recorded included check-in time (CK), scheduled time to start treatment (SC) and beam-on time for the first beam of therapy (ST). SPSS version 18 was used for statistical calculations, correlations and assessing significance.

A total of 181 patients were treated during this duration. The total number of radiotherapy (RT) sessions recorded was 3011. Out of these 3011 sessions, number of times treated by rapid arc (RA), intensity-modulated radiotherapy (IMRT), three-dimensional conformal radiotherapy (3DCRT), stereotactic body radiotherapy (SBRT), stereotactic radiosurgery and stereotactic radiotherapy (SRS/SRT) were 68.18%, 30.19%, 0.167%, 0.565% and 0.19%, respectively. The mean (± standard deviation) times for scheduled time to start treatment (SC) to check-in time (CK), SC to ST (beam-on time for the first beam of treatment), CK to ST and (CK or SC) to ST were −14 ± 48 min, 6 ± 50 min, 19 ± 24 min and −4 ± 31 min, respectively.

Patient wait times during RT were presented in this study. This study covered the daily waiting times before RT during modern-day RT treatment sessions. This vast series of consecutive patient data will be a valuable resource for the future planning and management of any modern RT department.

Electron blocks are typically composed of a low melting point alloy (LMPA), which is poured into an insert frame containing a manually placed Styrofoam aperture negative used to define the desired field shape. Current implementations of the block fabrication process involve numerous steps which are subjective and prone to user error. Occasionally, bowing of the sides of the insert frame is observed, resulting in premature frame decommissioning. Recent works have investigated the feasibility of utilising 3D printing technology to replace the conventional electron block fabrication workflow; however, these approaches involved long print times, were not compatible with commonly used cadmium-free LMPAs, and did not address the problem of insert frame bowing. In this work, we sought to develop a new 3D printing technique that would remedy these issues.

Electron cutout negatives and alignment jigs were printed using Acrylonitrile Butadiene Styrene, which does not warp at the high temperatures associated with molten cadmium-free alloys. The accuracy of the field shape produced by electron blocks fabricated using the 3D printed negatives was assessed using Gafchromic film and beam profiler measurements. As a proof-of-concept, electron blocks with off-axis apertures, as well as complex multi-aperture blocks to be used for passive electron beam intensity modulation, were also created.

Film and profiler measurements of field size were in excellent agreement with the values calculated using the Eclipse treatment planning system, showing less than a 1% difference in line profile full-width at half-maximum. The multi-aperture electron blocks produced fields with intensity modulation ≤3.2% of the theoretically predicted value. Use of the 3D printed alignment jig – which has contours designed to match those of the insert frame – was found to reduce the amount of frame bowing by factors of 1.8 and 2.1 in the lateral and superior–inferior directions, respectively.

The 3D printed ABS negatives generated with our technique maintain their spatial accuracy even at the higher temperatures associated with cadmium-free LMPA. The negatives typically take between 1 and 2 hours to print and have a material cost of approximately $2 per patient.

The aim of this systematic review was to synthesise and summarise evidence surrounding the clinical use of fluoro-2-deoxy-d-glucose positron emission tomography/computed tomography (FDG-PET/CT) and magnetic resonance imaging (MRI) for target volume delineation (TVD) in rectal cancer radiotherapy planning.

PubMed, EMBASE, Cochrane library, CINAHL, Web of Science and Scopus databases and other sources were systematically queried using keywords and relevant synonyms. Eligible full-text studies were assessed for methodological quality using the QUADAS-2 tool.

Eight of the 1448 studies identified met the inclusion criteria. Findings showed that MRI significantly delineate larger tumour volumes (TVs) than FDG-PET/CT while diffusion-weighted magnetic resonance imaging (DW-MRI) defined smaller gross tumour volumes (GTVs) compared to T2 weighted-Magnetic Resonance Image. CT-based GTVs were found to be larger compared to FDG-PET/CT. FDG-PET/CT also identified new lesions in 15–17% patients and TVs extending outside the routinely used clinical standard CT TV in 29–83% patients. Between observers, delineated volumes were similar and consistent between MRI sequences, whereas interobserver agreement was significantly improved with FDG-PET/CT than CT.

FDG-PET/CT and DW-MRI appear to delineate smaller rectal TVs and show improved interobserver variability. Overall, this study provides valuable insights into the amount of attention in the research literature that has been paid to imaging for TVD in rectal cancer.