Collisionless shocks are frequently analysed using the magnetohydrodynamics (MHD) formalism, even though MHD assumes a small mean free path. Yet, isotropy of pressure, the fruit of binary collisions and assumed in MHD, may not apply in collisionless shocks. This is especially true within a magnetized plasma, where the field can stabilize an anisotropy. In a previous article (Bret & Narayan, J. Plasma Phys., vol. 88, no. 6, 2022b, p. 905880615), a model was presented capable of dealing with the anisotropies that may arise at the front crossing. It was solved for any orientation of the field with respect to the shock front. Yet, for some values of the upstream parameters, several downstream solutions were found. Here, we complete the work started in Bret & Narayan (J. Plasma Phys., vol. 88, no. 6, 2022b, p. 905880615) by showing how to pick the physical solution out of the ones offered by the algebra. This is achieved by 2 means: (i) selecting the solution that has the downstream field obliquity closest to the upstream one. This criterion is exemplified on the parallel case and backed up by particle-in-cell simulations. (ii) Filtering out solutions which do not satisfy a criteria already invoked to trim multiple solutions in MHD: the evolutionarity criterion, that we assume valid in the collisionless case. The end result is a model in which a given upstream configuration results in a unique, or no downstream configuration (as in MHD). The largest departure from MHD is found for the case of a parallel shock.

A conducting cylinder with a uniform magnetic field along its axis and radial temperature gradient is considered at the stationary state. At large temperature gradients the azimuthal Hall electrical current creates an axial magnetic field whose strength may be comparable with the original one. It is shown that the magnetic field, generated by the azimuthal Hall current, leads to the decrease of a magnetic field originated by external sources, and this suppression increases with an increase of the electromotive force, connected with thermodiffusion. Obtained results can help to investigate the influence of the Hall current on the coupled magnetothermal evolution of magnetic and electric fields in neutron stars, white dwarfs and, possibly, in laboratory facilities.

In the present work, we extend the results of a previous investigation on the dynamics of electrons under the action of an inverse free-electron-laser scheme (Almansa et al., Phys. Plasmas, vol. 26, 2019, 033105). While the former work examined electrons as single test particles subject to the combined action of a modulated wiggler plus a laser field, we now look at electrons as composing a particle beam, where collective space-charge effects are relevant and included in the analysis. Our previous work showed that effective acceleration is achieved when the initial velocities of the particles are close enough to the phase velocity of the beat-wave mode formed by the laser and the wiggler fields. Electrons are then initially accelerated by a ponderomotive uphill effect generated by the beat mode and, once reaching the phase velocity of the beat, undergo a final strong resonant acceleration step resembling a catapult effect. The present work shows that, under proper conditions, space-charge effects play a similar role as the initial (or injected) velocity of the beam. Even if acceleration is absent when space charge is neglected, it may be present and effective when charge effects are taken into account. We also discuss how far the space charge can grow without affecting the sustainability of the acceleration process.

Generalising the Elsässer variables, we introduce the $Q$-variables. These are more flexible than the Elsässer variables, because they also allow us to track waves with phase speeds different than the Alfvén speed. We rewrite the magnetohydrodynamics (MHD) equations with these $Q$-variables. We consider also the linearised version of the resulting MHD equations in a uniform plasma, and recover the classical Alfvén waves, but also separate the fast and slow magnetosonic waves into upward- and downward-propagating waves. Moreover, we show that the $Q$-variables may also track the upward- and downward-propagating surface Alfvén waves in a non-uniform plasma, displaying the power of our generalisation. In the end, we lay the mathematical framework for driving solar wind models with a multitude of wave drivers.

This study documents several correlations observed during the first run of the plasma wakefield acceleration experiment E300 conducted at FACET-II, using a single drive electron bunch. The established correlations include those between the measured maximum energy loss of the drive electron beam and the integrated betatron X-ray signal, the calculated total beam energy deposited in the plasma and the integrated X-ray signal, among three visible light emission measuring cameras and between the visible plasma light and X-ray signal. The integrated X-ray signal correlates almost linearly with both the maximum energy loss of the drive beam and the energy deposited into the plasma, demonstrating its usability as a measure of energy transfer from the drive beam to the plasma. Visible plasma light is found to be a useful indicator of the presence of a wake at three locations that overall are two metres apart. Despite the complex dynamics and vastly different time scales, the X-ray radiation from the drive bunch and visible light emission from the plasma may prove to be effective non-invasive diagnostics for monitoring the energy transfer from the beam to the plasma in future high-repetition-rate experiments.

We present a detailed characterization of the structure and evolution of differentially rotating plasmas driven on the MAGPIE pulsed-power generator (1.4 MA peak current, 240 ns rise time). The experiments were designed to simulate physics relevant to accretion discs and jets on laboratory scales. A cylindrical aluminium wire array Z pinch enclosed by return posts with an overall azimuthal off-set angle was driven to produce ablation plasma flows that propagate inwards in a slightly off-radial trajectory, injecting mass, angular momentum and confining ram pressure to a rotating plasma column on the axis. However, the plasma is free to expand axially, forming a collimated, differentially rotating axial jet that propagates at ${\approx }100\,{\rm km}\,{\rm s}^{-1}$. The density profile of the jet corresponds to a dense shell surrounding a low-density core, which is consistent with the centrifugal barrier effect being sustained along the jet's propagation. We show analytically that, as the rotating plasma accretes mass, conservation of mass and momentum implies plasma radial growth scaling as $r \propto t^{1/3}$. As the characteristic moment of inertia increases, the rotation velocity is predicted to decrease and settle on a characteristic value ${\approx }20\,{\rm km}\,{\rm s}^{-1}$. We find that both predictions are in agreement with Thomson scattering and optical self-emission imaging measurements.

The Okubo–Weiss (Okubo, Deep-Sea Res., vol. 17, issue 3, 1970, pp. 445–454; Weiss, Physica D, vol. 48, issue 2, 1991, pp. 273–294) criterion has been widely used as a diagnostic tool to divide a two-dimensional (2-D) hydrodynamical flow field into hyperbolic and elliptic regions. This paper considers extension of these ideas to 2-D magnetohydrodynamic (MHD) flows, and presents an Okubo–Weiss-type criterion to parameterize the magnetic field topology in 2-D MHD flows. This ensues via its topological connections with the intrinsic metric properties of the underlying magnetic flux manifold, and is illustrated by recasting the Okubo–Weiss-type criterion via the 2-D MHD stationary generalized Alfvénic state condition to approximate the slow-flow-variation ansatz imposed in its derivation. The Okubo–Weiss-type parameter then turns out to be related to the sign definiteness of the Gaussian curvature of the magnetic flux manifold. A similar formulation becomes possible for 2-D electron MHD flows, by using the generalized magnetic flux framework to incorporate the electron-inertia effects. Numerical simulations of quasi-stationary vortices in 2-D MHD flows in the decaying turbulence regime are then given to demonstrate that the Okubo–Weiss-type criterion is able to separate the MHD flow field into elliptic and hyperbolic field configurations very well.

Electrostatic gyrokinetic instabilities and turbulence in the Wendelstein 7-X stellarator are studied. Particular attention is paid to the ion-temperature-gradient (ITG) instability and its character close to marginal stability [Floquet-type turbulence (Zocco et al., Phys. Rev. E, vol. 106, 2022, p. L013202) with no electron temperature gradient]. The flux tube version of the $\delta f$ code stella (Barnes et al., J. Comput. Phys., vol. 391, 2019, pp. 365–380) is used to run linear and nonlinear gyrokinetic simulations with kinetic electrons. The nature of the dominant instability depends on the wavelength perpendicular to the magnetic field, and the results are conveniently displayed in stability diagrams that take this dependence into account. This approach highlights the presence of universal instabilities, which are less unstable but have longer wavelengths than other modes. A quasi-linear estimate of the heat flux suggests they are relevant for transport. Close to the stability threshold, the linear eigenmodes and turbulence form highly extended structures along the computational domain if the magnetic shear is small. Numerical experiments and diagnostics are undertaken to assess the resulting radial localisation of the turbulence, which affects the interaction of the latter with zonal flows. Increasing the amplitude of the magnetic shear (e.g.through current drive) has a stabilising effect on the turbulence and, thus, reduces the nonlinear energy transport.

We investigate the effects of different guard geometries on the currents to needle-type Langmuir probes. The results are based on particle-in-cell numerical simulations. We show that if the guard length is less than 6–8 Debye lengths there can be a significant effect on the currents to the probe. A guard radius should not be larger than the Debye length, otherwise it can also significantly affect the currents. However, since guard radii are often close to the probe radius, the second condition is usually satisfied.

Magnetic reconnection is an important process in astrophysical environments, as it reconfigures magnetic field topology and converts magnetic energy into thermal and kinetic energy. In extreme astrophysical systems, such as black hole coronae and pulsar magnetospheres, radiative cooling modifies the energy partition by radiating away internal energy, which can lead to the radiative collapse of the reconnection layer. In this paper, we perform two- and three-dimensional simulations to model the MARZ (Magnetic Reconnection on Z) experiments, which are designed to access cooling rates in the laboratory necessary to investigate reconnection in a previously unexplored radiatively cooled regime. These simulations are performed in GORGON, an Eulerian two-temperature resistive magnetohydrodynamic code, which models the experimental geometry comprising two exploding wire arrays driven by 20 MA of current on the Z machine (Sandia National Laboratories). Radiative losses are implemented using non-local thermodynamic equilibrium tables computed using the atomic code Spk, and we probe the effects of radiation transport by implementing both a local radiation loss model and $P_{1/3}$ multi-group radiation transport. The load produces highly collisional, super-Alfvénic (Alfvén Mach number $M_A \approx 1.5$), supersonic (Sonic Mach number $M_S \approx 4-5$) strongly driven plasma flows which generate an elongated reconnection layer (Aspect Ratio $L/\delta \approx 100$, Lundquist number $S_L \approx 400$). The reconnection layer undergoes radiative collapse when the radiative losses exceed the rates of ohmic and compressional heating (cooling rate/hydrodynamic transit rate = $\tau _{\text {cool}}^{-1}/\tau _{H}^{-1}\approx 100$); this generates a cold strongly compressed current sheet, leading to an accelerated reconnection rate, consistent with theoretical predictions. Finally, the current sheet is also unstable to the plasmoid instability, but the magnetic islands are extinguished by strong radiative cooling before ejection from the layer.

We introduce an extension of the particle-in-cell method that captures the Landau collisional effects in the Vlasov–Maxwell–Landau equations. The method arises from a regularisation of the variational formulation of the Landau equation, leading to a discretisation of the collision operator that conserves mass, charge, momentum and energy, while increasing the (regularised) entropy. The collisional effects appear as a fully deterministic effective force, thus the method does not require any transport–collision splitting. The scheme can be used in arbitrary dimension, and for a general interaction, including the Coulomb case. We validate the scheme on scenarios such as the Landau damping, the two-stream instability and the Weibel instability, demonstrating its effectiveness in the numerical simulation of plasma.

This study investigates the effect of a transverse magnetic field on high-voltage pulsed discharge in helium at a pressure of 30 Torr. A simple two-dimensional fluid model that describes the high-voltage pulsed discharge in helium in a transverse weak magnetic field (B = 0.4 T) is presented, which uses an empirical relation to account for the magnetic field. The results of using the empirical relation for the effective field agree well with the experimental results. The dynamics of discharge development in the presence of the magnetic field is also investigated. The magnetic field does not significantly affect the gas-discharge development dynamics in helium at a pressure of 30 Torr.

Isothermal fluid turbulence simulations have been performed in the edge and scrape-off layer (SOL) of an analytic stellarator configuration with an island divertor, thereby providing numerical insight into edge turbulence in regions around islands in a stellarator. The steady-state transport follows the a curvature drive that is inverse to the major radius ($1/R$) toward the outboard side, but large fluctuations are present throughout the island divertor region, with the average wavelength of similar size to the island width. The system exhibits a prominent $m=2$, $n=5$ mode, where m is the poloidal mode number and n is the toroidal mode number, although other modes are present. The amplitude and radial extent of the density fluctuations are similar throughout the edge and SOL, but can decrease near island O-points. The fluctuations exhibit a predominantly positive skewness on the outboard midplane, indicating blob-like perturbations for the transport into the outer SOL. It is determined that a point on the separatrix is generally more correlated with regions outside of the SOL than a nearby reference point which does not lie on the separatrix.

The centrifugal mirror confinement scheme incorporates supersonic rotation of a plasma into a magnetic mirror device. This concept has been shown experimentally to drastically decrease parallel losses and increase plasma stability as compared with prior axisymmetric mirrors. MCTrans++ is a dimensionless (0-D) scoping tool which rapidly models experimental operating points in the Centrifugal Mirror Fusion Experiment (CMFX) at the University of Maryland. In the low-collisionality regime, parallel losses can be modelled analytically. A confining potential is set up that is partially ambipolar and partially centrifugal. Due to the stabilizing effects of flow shear, the perpendicular losses can be modelled as classical. Radiation losses such as bremsstrahlung and cyclotron emission are taken into account. A neutrals model is included, and, in some circumstances, charge-exchange losses are found to exceed all other loss mechanisms. We use the SUNDIALS ARKODE library to solve the underlying equations of this model; the resulting software is suitable for scanning large parameter spaces, and can also be used to model time-dependent phenomena such as a capacitive discharge. MCTrans++ has been used to verify results from prior centrifugal mirrors, create an experimental plan for CMFX and find configurations for future reactor-scale fusion devices.

The theory of the terahertz (THz) waves emission from a near-critical plasma slab under the action of the focused p-polarized laser pulse is developed. The spectral, angular and energy characteristics of the THz signal are studied as functions of the focusing degree and the incidence angle of laser radiation, as well as the density and thickness of the plasma slab. It is shown that the extremely strong increase in the energy of the THz signal (up to millijoule level) and conversion rate (up to 10 %) occurs at the almost normal incidence of the ultra-short, tightly focused p-polarized laser pulse on the thin plasma slab with the near-critical density and rare electron collisions.

This paper is based on a report at the 2nd International Fusion Plasma Conference & 13th International Conference on Open Magnetic Systems for Plasma Confinement (iFPC & OS 2023), August 21–25, 2023, Busan, Korea and provides a brief overview of the status of work at the Budker Institute on the study of hot plasma confinement in open-type magnetic traps with a linear axisymmetric configuration. The main attention is paid to key problems: magnetohydrodynamics (MHD) stability in regimes with extremely high relative pressure, longitudinal electronic thermal conductivity, stability with respect to the development of kinetic modes and transverse transport. This paper provides an overview of the methods we are developing to address these problems, the experimental and theoretical results achieved and plans for future development. The last section of the article provides brief information about the preliminary design of the gas-dynamic multiple-mirror trap device, the development of which has been completed.

BOUT++ turbulence simulations were performed to investigate the impact of turbulence spreading on the edge localized mode (ELM) size and divertor heat flux width $({\lambda _q})$ broadening in small ELM regimes. This study is motivated by EAST experiments. BOUT++ linear simulations of a pedestal radial electric field (Er) scan show that the dominant toroidal number mode (n) shifts from high-n to low-n, with a narrow mode spectrum, and the maximum linear growth rate increases as the pedestal Er well deepens. The nonlinear simulations show that as the net E × B pedestal flow increases, the pressure fluctuation level and its inward penetration beyond the top of the pedestal both increase. This leads to a transition from small ELMs to large ELMs. Both inward and outward turbulence spreading are sensitive to the scrape-off-layer (SOL) plasma profiles. The inward turbulence spreading increases for the steep SOL profiles, leading to increasing pedestal energy loss in the small ELM regime. The SOL width $({\lambda _q})$ is significantly broadened progressing from the ELM-free to small ELM regime, due to the onset of strong radial turbulent transport. The extent of the SOL width $({\lambda _q})$ broadening depends strongly on outward turbulence spreading. The fluctuation energy intensity flux ${\varGamma _\varepsilon }$ at the separatrix can be enhanced by increasing either pedestal Er flow shear or local SOL pressure gradient. The ${\lambda _q}$ is broadened as the fluctuation energy intensity flux ${\varGamma _\varepsilon }$ at the last close flux surface (LCFS) increases. Local SOL E × B flow shear will restrain outward turbulence spreading and the associated heat flux width broadening. Operating in H-mode with small ELMs has the potential to solve two critical problems: reducing the ELM size and broadening the SOL width.

Recently, stochastic motion of 3.5-MeV alpha particles with orbits that vary between locally trapped and locally passing states (transitioning particles) in a Helias reactor was observed numerically. This validated the theoretical predictions that (i) the stochastic diffusion represents a mechanism of considerable delayed loss of fast ions in quasi-isodynamic stellarators and (ii) it is possible to prevent the escape of particles to the wall by closing the separatrix between the locally trapped and passing states. It was concluded that, in principle, the separatrix could be made closed, resulting in a reduction of fast ion losses, by compensating for the effect of the helical component of the magnetic field $(1, 1)$ with an enhanced ‘anti-helical’ harmonic $(1, -1)$; the enlargement of this harmonic was proposed previously for other reasons. This possibility is explored in this work. Equations of previous relevant works were generalised to include the $(1, -1)$ harmonic. Calculations were carried out for several magnitudes of the ratio of anti-helical to helical magnetic field harmonics. Positive effects were found already at the smallest anti-helical harmonic considered: when the latter ratio is 0.25, transitioning particles with the smallest and intermediate pitch parameters are confined and, moreover, their fraction decreased. When the ratio is 0.85, almost all transitioning particles are confined and their fraction is minimal; well-confined localised orbits dominate at the smallest pitch parameters.

Laser-driven ion acceleration is well established using solid targets mainly in the target normal sheath acceleration regime. To follow the increasing repetition rate available on high-intensity lasers, the use of high-density gas targets has been explored in the past decade. When interacting with targets reaching densities close to the critical one, the laser pulse can trigger different acceleration mechanisms such as Collisionless Shock Acceleration (CSA) or hole boring. Particle-in-cell simulations using ideal target profiles show that CSA can accelerate a collimated, narrow energy spread and few hundreds of megaelectronvolts ion beam on the laser axis. Nevertheless, in real experiments, the laser will not only interact with an overcritical, thin plasma slab with sharp density gradients, but also with lower density regions surrounding the core of the gas jet, extending to several hundreds of micrometres. The interaction of the laser with these lower density wings will lead to nonlinear effects that will reduce the available energy to drive the shock in the high-density region of the target. Optically tailoring this target could mitigate that issue. Recent experiments conducted on different laser facilities aimed at testing several tailoring configurations. We first tested a scheme with a copropagating picosecond prepulse to create a lower density plasma channel to facilitate the propagation of the main pulse, while the second one was a transverse tailoring driven by nanosecond laser pulses to generate blast waves and form a high-density plasma slab. The main results will be presented here and the methods compared.