We introduce a new test for a two-sided hypothesis involving a subset of the structural parameter vector in the linear instrumental variables (IVs) model. Guggenberger, Kleibergen, and Mavroeidis (2019, Quantitative Economics, 10, 487–526; hereafter GKM19) introduce a subvector Anderson–Rubin (AR) test with data-dependent critical values that has asymptotic size equal to nominal size for a parameter space that allows for arbitrary strength or weakness of the IVs and has uniformly nonsmaller power than the projected AR test studied in Guggenberger et al. (2012, Econometrica, 80(6), 2649–2666). However, GKM19 imposes the restrictive assumption of conditional homoskedasticity (CHOM). The main contribution here is to robustify the procedure in GKM19 to arbitrary forms of conditional heteroskedasticity. We first adapt the method in GKM19 to a setup where a certain covariance matrix has an approximate Kronecker product (AKP) structure which nests CHOM. The new test equals this adaptation when the data are consistent with AKP structure as decided by a model selection procedure. Otherwise, the test equals the AR/AR test in Andrews (2017, Identification-Robust Subvector Inference, Cowles Foundation Discussion Papers 3005, Yale University) that is fully robust to conditional heteroskedasticity but less powerful than the adapted method. We show theoretically that the new test has asymptotic size bounded by the nominal size and document improved power relative to the AR/AR test in a wide array of Monte Carlo simulations when the covariance matrix is not too far from AKP.

Regularized quantile regression (QR) is a useful technique for analyzing heterogeneous data under potentially heavy-tailed error contamination in high dimensions. This paper provides a new analysis of the estimation/prediction error bounds of the global solution of $L_1$-regularized QR (QR-LASSO) and the local solutions of nonconvex regularized QR (QR-NCP) when the number of covariates is greater than the sample size. Our results build upon and significantly generalize the earlier work in the literature. For certain heavy-tailed error distributions and a general class of design matrices, the least-squares-based LASSO cannot achieve the near-oracle rate derived under the normality assumption no matter the choice of the tuning parameter. In contrast, we establish that QR-LASSO achieves the near-oracle estimation error rate for a broad class of models under conditions weaker than those in the literature. For QR-NCP, we establish the novel results that all local optima within a feasible region have desirable estimation accuracy. Our analysis applies to not just the hard sparsity setting commonly used in the literature, but also to the soft sparsity setting which permits many small coefficients. Our approach relies on a unified characterization of the global/local solutions of regularized QR via subgradients using a generalized Karush–Kuhn–Tucker condition. The theory of the paper establishes a key property of the subdifferential of the quantile loss function in high dimensions, which is of independent interest for analyzing other high-dimensional nonsmooth problems.

We study semiparametric inference in a small-dimensional vector autoregressive (VAR) model of order p augmented by unobservable common factors with a dynamic described by a VAR process of order q. This state-space specification is useful to measure separately the direct causality effects and the responses to dynamic common factors. We show that the state-space parameters are identifiable from the autocovariance function of the observed process. We estimate the model by means of a multistep procedure in closed-form, which combines an eigenvalue–eigenvector matrix decomposition and a linear instrumental variable estimation allowing for Hansen–Sargan specification tests. We study the asymptotic and finite-sample properties of the parameter estimators and of rank tests for selecting the number of unobservable factors and VAR orders. In an empirical illustration, we investigate the dynamic common factors and the spillover effects that explain the co-movements among the log daily realized volatilities of four European stock market indices.

We consider a sequential treatment problem with covariates. Given a realization of the covariate vector, instead of targeting the treatment with highest conditional expectation, the decision-maker targets the treatment which maximizes a general functional of the conditional potential outcome distribution, e.g., a conditional quantile, trimmed mean, or a socioeconomic functional such as an inequality, welfare, or poverty measure. We develop expected regret lower bounds for this problem and construct a near minimax optimal sequential assignment policy.

We propose two simple semiparametric estimation methods for ordered response models with an unknown error distribution. The proposed methods do not require users to choose any tuning parameters, and they automatically incorporate the monotonicity restriction of the unknown distribution function. Fixing finite-dimensional parameters in the model, we construct nonparametric maximum likelihood estimates for the error distribution based on the related binary choice data or the entire ordered response data. We then obtain estimates for finite-dimensional parameters based on moment conditions given the estimated distribution function. Our semiparametric approaches deliver root-n consistent and asymptotically normal estimators of the regression coefficient and threshold parameter. We also develop valid bootstrap procedures for inference. The advantages of our methods are borne out in simulation studies and a real data application.

Controlling the bias is central to estimating semiparametric models. Many methods have been developed to control bias in estimating conditional expectations while maintaining a desirable variance order. However, these methods typically do not perform well at moderate sample sizes. Moreover, and perhaps related to their performance, nonoptimal windows are selected with undersmoothing needed to ensure the appropriate bias order. In this paper, we propose a recursive differencing estimator for conditional expectations. When this method is combined with a bias control targeting the derivative of the semiparametric expectation, we are able to obtain asymptotic normality under optimal windows. As suggested by the structure of the recursion, in a wide variety of triple index designs, the proposed bias control performs much better at moderate sample sizes than regular or higher-order kernels and local polynomials.

We propose a series-based nonparametric specification test for a regression function when data are spatially dependent, the “space” being of a general economic or social nature. Dependence can be parametric, parametric with increasing dimension, semiparametric or any combination thereof, thus covering a vast variety of settings. These include spatial error models of varying types and levels of complexity. Under a new smooth spatial dependence condition, our test statistic is asymptotically standard normal. To prove the latter property, we establish a central limit theorem for quadratic forms in linear processes in an increasing dimension setting. Finite sample performance is investigated in a simulation study, with a bootstrap method also justified and illustrated. Empirical examples illustrate the test with real-world data.

This paper proposes a testof the single equilibrium in the data assumption commonly maintained when estimating static discrete games of incomplete information. By allowing for discrete common knowledge payoff-relevant unobserved heterogeneity, the test generalizes existing methods attributing all correlation betweenplayers’ decisions to multiple equilibria. It does not require the estimation of payoffs and is therefore useful in empirical applications leveraging multiple equilibria to identify the model’s primitives. The procedure boils down to testing the emptiness of the set of data generating processes that can rationalize the sample through a single equilibrium and a finite mixture over unobserved heterogeneity. Under verifiable conditions, this testable implication is generically sufficient for degenerate equilibrium selection. The main identifying assumption is the existence of an observable variable that plays the role of a proxy for the unobservable heterogeneity. Examples of such proxies are provided based on empirical applications from the existing literature.

This paper analyzes the higher-order approximation of instrumental variable (IV) estimators in a linear homoskedastic IV regression model when a large set of instruments with potential invalidity is present. We establish theoretical results on the higher-order mean-squared error (MSE) approximation of the two-stage least-squares (2SLS), the limited information maximum likelihood (LIML), the Fuller (FULL), the bias-adjusted 2SLS, and jackknife version of the LIML and FULL estimators by allowing for local violations of the instrument exogeneity conditions. Based on the approximation to the higher-order MSE, we consider the instrument selection criteria that can be used to choose among the set of available instruments. We demonstrate the asymptotic optimality of the instrument selection procedure proposed by Donald and Newey (2001, Econometrica 69, 1161–1191) in the presence of locally (faster than $N^{-1/2}$) invalid instruments in the sense that the dominant term in the MSE with the chosen instrument is asymptotically equivalent to the infeasible optimum. Furthermore, we propose instrument selection procedures to choose instruments among the sets of conservative (known) valid instruments and potentially locally ($N^{-1/2}$) invalid instruments based on the higher-order MSE of the IV estimators by considering the bias-variance trade-off.

This paper proposes a robust moment selection method aiming to pick the best model even if this is a moment condition model with mixed identification strength, that is, moment conditions including moment functions that are local to zero uniformly over the parameter set. We show that the relevant moment selection procedure of Hall et al. (2007, Journal of Econometrics 138, 488–512) is inconsistent in this setting as it does not explicitly account for the rate of convergence of parameter estimation of the candidate models which may vary. We introduce a new moment selection procedure based on a criterion that automatically accounts for both the convergence rate of the candidate model’s parameter estimate and the entropy of the estimator’s asymptotic distribution. The benchmark estimator that we consider is the two-step efficient generalized method of moments estimator, which is known to be efficient in this framework as well. A family of penalization functions is introduced that guarantees the consistency of the selection procedure. The finite-sample performance of the proposed method is assessed through Monte Carlo simulations.

This paper surveys recent advances in drawing structural conclusions from vector autoregressions (VARs), providing a unified perspective on the role of prior knowledge. We describe the traditional approach to identification as a claim to have exact prior information about the structural model and propose Bayesian inference as a way to acknowledge that prior information is imperfect or subject to error. We raise concerns from both a frequentist and a Bayesian perspective about the way that results are typically reported for VARs that are set-identified using sign and other restrictions. We call attention to a common but previously unrecognized error in estimating structural elasticities and show how to correctly estimate elasticities even in the case when one only knows the effects of a single structural shock.

We use mollification to regularize the problem of deconvolution of random variables. This regularization method offers a unifying and generalizing framework in order to compare the benefits of various filter-type techniques like deconvolution kernels, Tikhonov, or spectral cutoff methods. In particular, the mollifier approach allows to relax some restrictive assumptions required for the deconvolution kernels, and has better stabilizing properties compared with spectral cutoff or Tikhonov. We show that this approach achieves optimal rates of convergence for both finitely and infinitely smoothing convolution operators under Besov and Sobolev smoothness assumptions on the unknown probability density. The qualification can be arbitrarily high depending on the choice of the mollifier function. We propose an adaptive choice of the regularization parameter using the Lepskiĭ method, and we provide simulations to compare the finite sample properties of our estimator with respect to the well-known regularization methods.

We propose various semiparametric estimators for nonlinear selection models, where slope and intercept can be separately identified. When the selection equation satisfies a monotonic index restriction, we suggest a local polynomial estimator, using only observations for which the marginal cumulative distribution function of the instrument index is close to one. Data-driven procedures such as cross-validation may be used to select the bandwidth for this estimator. We then consider the case in which the monotonic index restriction does not hold and/or the set of observations with a propensity score close to one is thin so that convergence occurs at a rate that is arbitrarily close to the cubic rate. We explore the finite sample behavior in a Monte Carlo study and illustrate the use of our estimator using a model for count data with multiplicative unobserved heterogeneity.

This paper studies control function (CF) approaches in endogenous threshold regression where the threshold variable is allowed to be endogenous. We first use a simple example to show that the structural threshold regression (STR) estimator of the threshold point in Kourtellos, Stengos and Tan (2016, Econometric Theory 32, 827–860) is inconsistent unless the endogeneity level of the threshold variable is low compared to the threshold effect. We correct the CF in the STR estimator to generate our first CF estimator using a method that extends the two-stage least squares procedure in Caner and Hansen (2004, Econometric Theory 20, 813–843). We develop our second CF estimator which can be treated as an extension of the classical CF approach in endogenous linear regression. Both these approaches embody threshold effect information in the conditional variance beyond that in the conditional mean. Given the threshold point estimates, we propose new estimates for the slope parameters. The first is a by-product of the CF approach, and the second type employs generalized method of moment (GMM) procedures based on two new sets of moment conditions. Simulation studies, in conjunction with the limit theory, show that our second CF estimator and confidence interval for the threshold point together with the associated second GMM estimator and confidence interval for the slope parameter dominate the other methods. We further apply the new estimation methodology to an empirical application from international trade to illustrate its usefulness in practice.

This paper introduces a novel Itô diffusion process to model high-frequency financial data that can accommodate low-frequency volatility dynamics by embedding the discrete-time nonlinear exponential generalized autoregressive conditional heteroskedasticity (GARCH) structure with log-integrated volatility in a continuous instantaneous volatility process. The key feature of the proposed model is that, unlike existing GARCH-Itô models, the instantaneous volatility process has a nonlinear structure, which ensures that the log-integrated volatilities have the realized GARCH structure. We call this the exponential realized GARCH-Itô model. Given the autoregressive structure of the log-integrated volatility, we propose a quasi-likelihood estimation procedure for parameter estimation and establish its asymptotic properties. We conduct a simulation study to check the finite-sample performance of the proposed model and an empirical study with 50 assets among the S&P 500 compositions. Numerical studies show the advantages of the proposed model.

We consider a situation where the distribution of a random variable is being estimated by the empirical distribution of noisy measurements of that variable. This is common practice in, for example, teacher value-added models and other fixed-effect models for panel data. We use an asymptotic embedding where the noise shrinks with the sample size to calculate the leading bias in the empirical distribution arising from the presence of noise. The leading bias in the empirical quantile function is equally obtained. These calculations are new in the literature, where only results on smooth functionals such as the mean and variance have been derived. We provide both analytical and jackknife corrections that recenter the limit distribution and yield confidence intervals with correct coverage in large samples. Our approach can be connected to corrections for selection bias and shrinkage estimation and is to be contrasted with deconvolution. Simulation results confirm the much-improved sampling behavior of the corrected estimators. An empirical illustration on heterogeneity in deviations from the law of one price is equally provided.

This paper proposes a model-free test for the strict stationarity of a potentially vector-valued time series using the discrete Fourier transform (DFT) approach. We show that the DFT of a residual process based on the empirical characteristic function weakly converges to a zero spectrum in the frequency domain for a strictly stationary time series and a nonzero spectrum otherwise. The proposed test is powerful against various types of nonstationarity including deterministic trends and smooth or abrupt structural changes. It does not require smoothed nonparametric estimation and, thus, can detect the Pitman sequence of local alternatives at the parametric rate $T^{-1/2}$, faster than all existing nonparametric tests. We also design a class of derivative tests based on the characteristic function to test the stationarity in various moments. Monte Carlo studies demonstrate that our test has reasonarble size and excellent power. Our empirical application of exchange rates strongly suggests that both nominal and real exchange rate returns are nonstationary, which the augmented Dickey–Fuller and Kwiatkowski–Phillips–Schmidt–Shin tests may overlook.

In a dynamic panel data model, the number of moment conditions increases rapidly with the time dimension, resulting in a large dimensional covariance matrix of the instruments. As a consequence, the generalized method of moments (GMM) estimator exhibits a large bias in small samples, especially when the autoregressive parameter is close to unity. To address this issue, we propose a regularized version of the one-step GMM estimator using three regularization schemes based on three different ways of inverting the covariance matrix of the instruments. Under double asymptotics, we show that our regularized estimators are consistent and asymptotically normal. These regularization schemes involve a tuning or regularization parameter which needs to be chosen. We derive a data-driven selection of this regularization parameter based on an approximation of the higher-order mean square error and show its optimality. As an empirical application, we estimate a model of income dynamics.

This study provides an econometric methodology to test a linear structural relationship among economic variables. We propose the so-called distance-difference (DD) test and show that it has omnibus power against arbitrary nonlinear structural relationships. If the DD-test rejects the linear model hypothesis, a sequential testing procedure assisted by the DD-test can consistently estimate the degree of a polynomial function that arbitrarily approximates the nonlinear structural equation. Using extensive Monte Carlo simulations, we confirm the DD-test’s finite sample properties and compare its performance with the sequential testing procedure assisted by the J-test and moment selection criteria. Finally, through investigation, we empirically illustrate the relationship between the value-added and its production factors using firm-level data from the United States. We demonstrate that the production function has exhibited a factor-biased technological change instead of Hicks-neutral technology presumed by the Cobb–Douglas production function.