Tom et al. (J. Fluid Mech., vol. 947, 2022, p. A7) investigated the impact of two-way coupling (2WC) on particle settling velocities in turbulence. For the limited parameter choices explored, it was found that (i) 2WC substantially enhances particle settling compared with the one-way coupled case, even at low mass loading $\varPhi _m$ and (ii) preferential sweeping remains the mechanism responsible for the particles settling faster than the Stokes settling velocity in 2WC flows. However, significant alterations to the flow structure that can occur at higher mass loadings mean that the conclusions from Tom et al. (J. Fluid Mech., vol. 947, 2022, p. A7) may not generalise. Indeed, even under very low mass loadings, the influence of 2WC on particle settling might persist, challenging the conventional assumption. We therefore explore a much broader portion of the parameter space, with simulations covering cases where the impact of 2WC on the global fluid statistics ranges from negligible to strong. We find that, even for $\varPhi _m=7.5\times 10^{-3}$, 2WC can noticeably increase the settling for some choices of the Stokes and Froude numbers. When $\varPhi _m$ is large enough for the global fluid statistics to be strongly affected, we show that preferential sweeping continues to be the mechanism that enhances particle settling rates. Finally, we compare our results with previous numerical and experimental studies. While in some cases there is reasonable agreement, discrepancies exist even between different numerical studies and between different experiments. Future studies must seek to understand this before the discrepancies between numerical and experimental results can be adequately addressed.

The force and torque on a solid body in a viscous potential flow are often taken to be independent of viscosity. Joseph et al. (Eur. J. Mech. B/Fluids, vol. 12, 1993, pp. 97–106; J. Fluid Mech., vol. 265, 1994, pp. 1–23) proved that this holds for (i) the force (not the torque) in any two-dimensional flow, and (ii) the drag force experienced by a purely translating three-dimensional body. The remaining components of the force and torque, along with general three-dimensional flows, were not considered. Importantly, the flow was assumed to be unbounded and irrotational everywhere. We eliminate this rarely satisfied assumption and consider the viscous force and torque experienced by any closed surface where the flow is irrotational locally; this can include a body's surface. Any vorticity distribution is permitted away from the closed irrotational surface. In so doing, we complete the analysis of Joseph et al. for all components of the viscous force and torque in two and three dimensions and enable application to real flows that inevitably contain regions of vorticity.

We present direct numerical simulations of the splashing process between two cylindrical liquid rims. This belongs to a class of impact and collision problems with a wide range of applications in science and engineering, and motivated here by splashing of breaking ocean waves. Interfacial perturbations with a truncated white noise frequency profile are introduced to the rims before their collision, whose subsequent morphological development is simulated by solving the two-phase incompressible Navier–Stokes equation with the adaptive mesh refinement technique, within the Basilisk software environment. We first derive analytical solutions predicting the unsteady interfacial and velocity profiles of the expanding sheet forming between the two rims, and develop scaling laws for the evolution of the lamella rim under capillary deceleration. We then analyse the formation and growth of transverse ligaments ejected from the lamella rims, which we find to originate from the initial corrugated geometry of the perturbed rim surface. Novel scaling models are proposed for predicting the decay of the ligament number density due to the ongoing ligament merging phenomenon, and found to agree well with the numerical results presented here. The role of the mechanism in breaking waves is discussed further and necessary next steps in the problem are identified.

We report the unified constitutive law of vibroconvective turbulence in microgravity, i.e. $Nu \sim a^{-1} Re_{os}^\beta$ where the Nusselt number $Nu$ measures the global heat transport, $a$ is the dimensionless vibration amplitude, $Re_{os}$ is the oscillational Reynolds number and $\beta$ is the universal exponent. We find that the dynamics of boundary layers plays an essential role in vibroconvective heat transport and the $Nu$-scaling exponent $\beta$ is determined by the competition between the thermal boundary layer (TBL) and vibration-induced oscillating boundary layer (OBL). Then a physical model is proposed to explain the change of scaling exponent from $\beta =2$ in the TBL-dominant regime to $\beta = 4/3$ in the OBL-dominant regime. Our finding elucidates the emergence of universal constitutive laws in vibroconvective turbulence, and opens up a new avenue for generating a controllable effective heat transport under microgravity or even microfluidic environment in which the gravity effect is nearly absent.

Richtmyer–Meshkov (RM) instability at a single-mode interface impacted by a cylindrical divergent shock with low to moderate Mach numbers is investigated experimentally. The motion of an unperturbed interface is first examined to obtain the background flow. The shocked interface moves uniformly at the early stage, but later decelerates. The stronger the incident shock, the larger the interface deceleration, which is reasonably predicted by a one-dimensional model considering the effect of postshock non-uniformity. Such a deceleration greatly inhibits the growths of harmonics of an initially perturbed interface and, consequently, the divergent RM instability presents very weak nonlinearity from early to late stages. Particularly, higher-Mach-number cases present weaker nonlinearity due to larger deceleration there. This abnormal linear growth regime is reported for the first time. Benefiting from this, the incompressible linear model holds validity at all stages of divergent RM instability. It is also found that compressibility inhibits the initial growth rate, but produces a weak influence on the subsequent instability growth.