Waterhemp has become a serious management challenge for New York (NY) field crop growers. Two putative glyphosate-resistant (GR) waterhemp populations (NY1 and NY2) were collected in 2023 from two soybean fields in Seneca County, NY. The objectives of this research were to (1) confirm and characterize the level of glyphosate resistance in waterhemp populations from NY relative to a known glyphosate-susceptible Nebraska (NE_SUS) population and (2) evaluate the efficacy of various postemergence (POST) herbicides for GR waterhemp control. Based on the shoot dry weight reductions (GR50 values) in a dose-response study, the NY1 and NY2 populations exhibited 5.6- to 8.3-fold resistance to glyphosate compared with the NE_SUS population. In a separate study, POST herbicides such as dicamba, glufosinate, lactofen, and 2,4-D applied alone or in a mixture with glyphosate or glufosinate had provided 89% to 99% control and ≥ 97% shoot dry weight reduction of NY1 and NY2 populations 21 days after treatment (DAT). Greater than 98% control of the NE_SUS population was achieved with tested POST herbicides, except mesotrione (62% control). Furthermore, atrazine, chlorimuron + thifensulfuron, and mesotrione were the least effective in controlling NY1 and NY2 populations (42% to 59% control and 50% to 67% shoot dry weight reductions, respectively). These results confirm the first report of GR waterhemp in NY. Growers should adopt effective alternative POST herbicides tested in this study to manage GR waterhemp.

Palmer amaranth with resistance to dicamba, glufosinate, and protoporphyrinogen oxidase inhibitors has been documented in several southern states. With extensive use of these and other herbicides in South Carolina, a survey was initiated in fall 2020 and repeated in fall 2021 and 2022 to determine the relative response of Palmer amaranth accessions to selected preemergence and postemergence herbicides. A greenhouse screening experiment was conducted in which accessions were treated with three preemergence (atrazine, S-metolachlor, and isoxaflutole) and six postemergence (glyphosate, thifensulfuron-methyl, fomesafen, glufosinate, dicamba, and 2,4-D) herbicides at the 1× and 2× use rates. Herbicides were applied shortly after planting (preemergence) or at the 2- to 4-leaf growth stage (postemergence). Percent survival was evaluated 5 to 14 d after application depending on herbicide activity. Sensitivity to atrazine preemergence was lower for 49 and 33 accessions out of 115 to atrazine applied preemergence at the 1× and 2× rate, respectively. Most of the accessions (90%) were controlled by isoxaflutole applied preemergence at the 1× rate. Response to S-metolachlor applied preemergence indicated that 34% of the Palmer amaranth accessions survived the 1× rate (>60% survival). Eleven accessions exhibited reduced sensitivity to fomesafen applied postemergence; however, these percentages were not different from the 0% survivor group. Glyphosate applied postemergence at the 1× rate did not control most accessions (79%). Palmer amaranth response to thifensulfuron-methyl applied postemergence varied across the accessions, with only 36% and 28% controlled at the 1× rate and 2× rate, respectively. All accessions were controlled by 2,4-D, dicamba, or glufosinate when they were applied postemergence. Palmer amaranth accessions from this survey exhibited reduced susceptibility to several herbicides commonly used in agronomic crops in South Carolina. Therefore, growers should use multiple management tactics to minimize the evolution of herbicide resistance in Palmer amaranth in South Carolina.

Commercialization of florpyrauxifen-benzyl as Loyant® in 2018 as a synthetic auxin herbicide in rice was followed by soybean injury due to off-target movement of spray applications in the mid-southern United States. Concerns surrounding off-target movement led to the exploration of an alternative application method to help alleviate the issue. Field experiments were conducted in 2020 and 2021 to explore the likelihood of a reduction in soybean injury following applications of florpyrauxifen-benzyl coated on urea in narrow- and wide-row soybean systems and to determine the likelihood of volatilization from this novel application method. Florpyrauxifen-benzyl spray-applied at 0.18 g ai ha−1 caused greater than 60% injury, whereas coating the herbicide on urea at 5.63 g ai ha−1 never exceeded 30% injury in narrow-row soybean. Similarly, florpyrauxifen-benzyl spray-applied at 0.18 g ai ha−1 caused greater than 50% injury, whereas coating the herbicide on urea at 5.63 g ai ha−1 never exceeded 30% injury in wide-row soybean. As soybean injury increased, relative yield decreased in both narrow- and wide-row soybean. Spray-applied florpyrauxifen-benzyl decreased relative soybean groundcover, yield components, and soybean survival rate as the herbicide rate increased, whereas coating the herbicide on urea resulted in little to no decrease in both narrow- and wide-row soybean assessments. No negative impacts on relative yield and yield components of soybean from florpyrauxifen-benzyl coated on urea indicates that even though visible injury may persist, there is a low likelihood of any yield losses associated with the herbicide exposure using this application method. Additionally, coating the florpyrauxifen-benzyl on urea did not increase the likelihood of volatilization under any of the evaluated soil moisture conditions. Overall, applying florpyrauxifen-benzyl coated on urea is likely to be a safer application method and can reduce soybean injury compared to spray-applying the herbicide when favorable off-target movement conditions exist.

Twelve putative-resistant (R) redroot pigweed populations were collected in sunflower and soybean fields located in northeastern Greece, after repeated exposure to the acetolactate synthase (ALS)–inhibiting herbicides imazamox and tribenuron-methyl. Studies were conducted to determine the resistance status to these two ALS-inhibiting herbicides and evaluate alternative postemergence and preemergence herbicides for effective control. Two susceptible (S) populations were also included for comparison. Among the 12 putative-R populations studied in the whole-plant dose–response pot experiments, 11 were characterized as cross-resistant (R) to the imidazolinone imazamox and the sulfonylurea tribenuron-methyl. In contrast, the putative R5 and the two reference populations (S1, S2) populations were found to be susceptible. Sequencing of the ALS gene revealed that a point mutation (TGG to TTG at position 574) was selected in domain B, where in combination with domain A the majority of point mutations conferring resistance have been detected, resulting in an amino acid substitution from tryptophan (Trp) to leucine (Leu) in the 11 R populations. By contrast, all sequenced plants of the three susceptible populations were found with the wild-type allele encoding Trp574. The labeled rate of the postemergence herbicides tembotrione and dicamba provided fair to excellent control of the populations with ALS cross-resistance. In contrast, at this rate the preemergence herbicides S-metolachlor + terbuthylazine, isoxaflutole, aclonifen, metribuzin, and pendimethalin provided excellent control. These findings strongly suggest that 11 redroot pigweed populations have evolved cross-resistance to ALS-inhibiting herbicides, but viable options for chemical control of this weed still exist.

Tiafenacil is a new nonselective protoporphyrinogen IX oxidase–inhibiting herbicide with both grass and broadleaf activity labeled for preplant application to corn, cotton, soybean, and wheat. Early season rice emergence and growth often coincide in the mid-southern United States with applications of preplant herbicides to cotton and soybean, thereby increasing the opportunity for off-target herbicide movement from adjacent fields. Field studies were conducted to identify any deleterious effects of reduced rates of tiafenacil (12.5% to 0.4% of the lowest labeled application rate of 24.64 g ai ha−1) applied to 1- or 3-leaf rice. Visual injury 1 wk after treatment (WAT) for the 1- and 3-leaf growth stages ranged from 50% to 7% and 20% to 2%, respectively, whereas at 2 WAT these respective ranges were 13% to 2%, and no injury was observed. Tiafenacil applied at those rates had no negative season-long effect because observed early season injury was not manifested as a reduction in rice height 2 WAT or rough rice yield. Application of tiafenacil to crops directly adjacent to rice in its early vegetative stages of growth should be avoided because visual injury will occur. When off-target movement does occur, however, the affected rice should be expected to fully recover with no effect on growth or yield, assuming adequate growing conditions and agronomic/pest management are provided.

Introducing soybean cultivars resistant to 2,4-D and dicamba allowed for postemergence applications of these herbicides. These herbicides pose a high risk for off-target movement, and the potential influence on crops such as hemp is unknown. Two studies were conducted from 2020 through 2022 in controlled environments to evaluate hemp response to rates simulating off-target events of 2,4-D and dicamba. The objectives of these studies were to (1) determine the effects of herbicide (2,4-D and dicamba) and rate (1× to 1/100,000× labeled rate) on visible injury, height, and branching, and (2) determine the effect of 2,4-D rate (1× to 1/100,000× labeled rate) on visible injury, height, branching, and reproductive parameters. Herbicides were applied in the early vegetative stage, and evaluations took place 14 and 28 d after treatment (DAT) and at trial termination (42 DAT in the greenhouse trial and at harvest in the growth chamber trial). In the greenhouse study, 2,4-D and dicamba at the 1× rate, and the 1/10× rate of dicamba, caused 68%, 78%, and 20% injury 28 DAT, respectively. At the time of trial termination 42 DAT, plants treated with 1× rates of 2,4-D and dicamba, or 1/10× dicamba, were 19, 25, and 9 cm shorter than the nontreated control, respectively. Simulated off-target rates of 2,4-D and dicamba did not influence branching or plant weight at trial termination. In the growth chamber study, the 1× and 1/10× rates of 2,4-D caused 82% and 2% injury 28 DAT, respectively. Plant height, fresh weight, and cannabidiol (CBD) levels of plants treated with simulated off-target rates of 2,4-D were not different from the nontreated control. These studies suggest that hemp grown for CBD exposed to off-target rates of 2,4-D or dicamba in early vegetative stages may not have distinguishable effects 42 DAT or at harvest.

Mixing ammonium sulfate (AMS) can increase dicamba volatility. Therefore, AMS cannot be used with dicamba products in dicamba-resistant soybean. However, most dicamba products applied in corn are labeled to mix with AMS. The objectives of this study were to evaluate broadleaf weed control with dicamba (DiFlexx®) and dicamba/tembotrione (DiFlexx® DUO) applied alone or with AMS or AMS substitute and their effect on broadleaf weed density and biomass. Field experiments were conducted in Illinois, Missouri, and Nebraska in 2018 and 2019. In Illinois and Nebraska, mixing AMS + crop oil concentrate (COC) with dicamba applied at 1,120 g ae ha−1 increased the control of Palmer amaranth and waterhemp (Amaranthus species) from 78% to 92% and velvetleaf from 73% to 96% compared with dicamba applied alone 14 d after application (DAA); however, Missouri data showed no difference. Mixing AMS + COC with dicamba/tembotrione at 597 and 746 g ai ha−1 did not improve broadleaf weed control 14 DAA at any site compared with dicamba/tembotrione applied alone. Control of Amaranthus species was increased from 82% with dicamba applied at 840 g ae ha−1 to 96% when mixed with AMS + COC 28 DAA in Illinois; however, control was similar to dicamba applied at 1,120 g ae ha−1. Broadleaf weed control did not differ among dicamba or dicamba/tembotrione 28 and 56 DAA in Missouri and Nebraska. Broadleaf weed density decreased from 64 plants m−2 to 24 plants m−2 with dicamba at 1,120 g ae ha−1 with AMS + COC 14 DAA in Nebraska; however, no differences were observed in broadleaf weed density or biomass 56 DAA in any state. The results suggest that dicamba or dicamba/tembotrione can be applied without AMS or AMS substitute, especially at higher rates, without losing broadleaf weed control efficacy.

Off-target movement of growth regulator herbicides can cause severe injury to susceptible plants. Apart from not spraying on windy days or at excessive boom heights, making herbicide applications using nozzles that produce large droplets is the preferred method for reducing herbicide drift. Although large droplets maintain a higher velocity and are more likely to reach the leaf surface in windy conditions, their ability to remain on the leaf surface is poorly understood. Upon impact with the leaf surface, droplets may shatter, bounce, roll off, or be retained on the leaf surface. We examined how different nozzles, pressures, and adjuvants impact spray droplet adsorption on the leaf surface of common lambsquarters and soybean. Plants were grown in a greenhouse and sprayed in a spray chamber. Three nozzles (XR, AIXR, and TTI) were evaluated at 138, 259, and 379 kPa, respectively. Dicamba (0.14 kg ae ha−1) was applied alone and with methylated seed oil (MSO), a non-ionic surfactant, silicone-based adjuvant, crop oil concentrate, or a drift reduction adjuvant. A 1,3,6,8-pyrene tetra sulfonic acid tetra sodium salt was added as a tracer. Dicamba spray droplet adsorption when using the XR nozzle, which produced the smallest spray droplets, was 1.75 times greater than when applied with the TTI nozzle with the largest spray droplets. Applying dicamba with MSO increased adsorption on leaf surfaces nearly 4 times the amount achieved without an adjuvant. The lowest application pressure (138 kPa) increased dicamba spray volume adsorbed more than 10% compared to the higher pressures of 259 and 379 kPa. By understanding the impacts of these application parameters on dicamba spray droplet adsorption, applicators can select application parameters, equipment, and adjuvants that will maximize the amount of dicamba spray volume retained on the target leaf surface while minimizing dicamba spray drift.

Florpyrauxifen-benzyl has generated complaints and concerns around rice injury and off-target movement to soybean since its commercial launch in 2018. Developing a precise method for applying florpyrauxifen-benzyl was imperative for its continued use. Experiments were conducted in 2020 and 2021 to evaluate rice weed control as influenced by preflood application interval and flood loss following florpyrauxifen-benzyl at 30 g ai ha−1 applied as a spray or coated on urea. In a preflood application experiment, coating florpyrauxifen-benzyl on urea and applying it the day of flood establishment and 5 and 10 d prior to flooding (DPTF) resulted in lower yellow nutsedge, broadleaf signalgrass, and barnyardgrass control than when the herbicide was spray at 3 and 5 wk after final treatment (WAFT). Coating florpyrauxifen-benzyl onto urea provided only 61% to 63% yellow nutsedge control at 3 and 5 WAFT, which was 35 to 37 percentage points lower than when the spray was applied at 5 or 10 DPTF. Likewise, rice yields following applications of florpyrauxifen-benzyl coated onto urea were 1,200 kg ha−1 less than yields following spray applications. Florpyrauxifen-benzyl coated onto urea and clomazone provided lower levels of weed control than spraying the herbicide alone, suggesting an explanation for the yield losses. The timing of flood loss experiment suggested that when florpyrauxifen-benzyl coated onto urea at 30 g ai ha−1 was applied preflood and flood was relinquished at 2 h, 24 h, and 7 d after flood establishment, hemp sesbania and yellow nutsedge control were not affected. However, loss of floodwater 2 h after flood establishment resulted in lower barnyardgrass control than when the flood was lost 24 h and 7 d after flooding. Generally, the period between a herbicide application and flooding completion should be minimized to aid in weed control. These results indicate the importance of maintaining a flood for weed control and nutrient management.

Palmer amaranth, which is resistant to glyphosate and protoporphyrinogen oxidase inhibitors, remains a threat to cotton and soybean production in Tennessee. This is partly due to the recent evolution of dicamba-resistant Palmer amaranth in western Tennessee, which further complicates weed management. Experiments were conducted in 2021 and 2022 to determine the best timing between sequential applications and the order in which 2,4-D or dicamba should be used with glufosinate to control resistant Palmer amaranth. Palmer amaranth control increased when the interval between postemergence herbicide applications decreased from 21 to 7 d. At the 7-d interval in a dicamba-based system, the order of herbicides did not affect Palmer amaranth control. However, in a 2,4-D-based system, the greatest control was achieved when 2,4-D was applied first, followed by either 2,4-D or glufosinate. While weed height at the time of application had a significant effect on Palmer amaranth control with auxin herbicides, control was still unacceptable in the field at the labeled rates of dicamba or 2,4-D when applied to weeds that were <10 cm tall (48% and 53%, respectively). Neither dicamba nor 2,4-D provided acceptable control of the Palmer amaranth populations evaluated in this study. Sequential applications separated by 7 d provided better weed control than those separated by 21 d. Given that the better 7-d sequential treatments provided less than 90% control and resulted in more than 64,000 surviving Palmer amaranth plants per hectare suggests that relying solely on these herbicides for Palmer amaranth control is not a sustainable weed management strategy.

Preemergence applications of mesotrione, an herbicide that inhibits 4-hydroxyphenolpyruvate dioxygenase (HPPD), have recently gained regulatory approval in soybean varieties with appropriate traits. Giant ragweed is an extremely competitive broadleaf weed, and biotypes resistant to acetolactate synthase inhibitors (ALS-R) can be particularly difficult to manage with soil-residual herbicides in soybean production. This study investigated control of giant ragweed from preemergence applications of cloransulam (32 g ai ha–1), metribuzin (315 g ai ha–1), and S-metolachlor (1,600 g ai ha–1) in a factorial design with and without mesotrione (177 g ai ha–1) at two different sites over 2 yr. Treatments with mesotrione were also compared with two commercial premix products: sulfentrazone (283 g ai ha–1) and cloransulam (37 g ai ha–1), and chlorimuron (19 g ai ha–1), flumioxazin (69 g ai ha–1), and pyroxasulfone (87 g ai ha–1). At 42 d after planting, control and biomass reduction of giant ragweed were greater in treatments with mesotrione than any treatment without mesotrione. Giant ragweed biomass was reduced by 84% in treatments with mesotrione, whereas treatments without mesotrione did not reduce biomass relative to the nontreated. Following these preemergence applications, sequential herbicide treatments utilizing postemergence applications of glufosinate (655 g ai ha–1) plus fomesafen (266 g ai ha–1) and S-metolachlor (1,217 g ai ha–1) resulted in at least 97% control of giant ragweed at 42 d after planting, which was greater than sequential applications of glufosinate alone in 3 of 4 site-years. Preemergence applications of mesotrione can be an impactful addition to soybean herbicide programs designed to manage giant ragweed, with the potential to improve weed control and delay the onset of herbicide resistance by providing an additional effective herbicide site of action.

Soil fertility and disturbance can potentially modify weed dynamics in a corn–soybean rotation. Knowing how added mineral fertilizers and tillage influence weed populations in the long term can provide insight into weed community shifts, which may affect future weed management requirements. The first objective of this study was to evaluate the effect of 24 to 25 years of nitrogen and phosphorus fertilization treatments and tillage (moldboard vs. no-till) on weeds (density, biomass, and composition) before and after herbicide applications in 2016/corn and 2017/soybean. The second objective was to evaluate the effect of the same treatments 6 yr after no postemergence weed management in 2022/corn. Since the last evaluation performed in 2004, weed density, richness, and diversity increased, and more annual grasses were observed under both tillage regimes. No fertilization effect was observed on any weed variables, including composition, except for increased biomass when left to grow all season after crop planting. In managed plots, the density and biomass of annuals and perennials were generally higher in no-till, and discrepancies were highest for annual grass densities before herbicide application. Weed species richness and diversity based on counts were equivalent between tillage regimes, but total biomass was distributed between more species in no-till. Higher weed densities and concurrent weed biomass, observed in no-till, reduced crop yields in 2016/soybean only. The combination of low crop diversity and low use of residual herbicides during the trial potentially led to the observed species shifts and increased weed density.

Cover crop residue retention on the soil surface can suppress weeds and improve organic no-till soybean (Glycine max) yield and profitability compared to a tilled system. Appropriate cereal rye (Secale cereale) fall planting date and termination methods in the spring are critical to achieve these benefits. A plot-scale agronomic experiment was carried out from September 2018 to October 2021 in Kutztown, PA, USA to demonstrate the influence of cereal rye planting date (September or October) and mechanical termination method [no-till (I & J roller-crimper, Dawn ZRX roller, and mow-ted) and tilled (plow-cultivate)] on cover crop regrowth density, weed biomass, soybean yield, and economic returns. In one out of three years, the September rye planting accumulated more cover crop biomass than the October planting, but the regrowth of the rye after roller-crimping was greater with this planting date. Cover crop planting date had no effect on total weed biomass and demonstrated varying effects on soybean grain yield and economic returns. The Dawn ZRX roller outperformed the I & J roller-crimper in effectively terminating cover crops, while the I & J roller-crimper demonstrated more uniform weed suppression and led to greater soybean yields over a span of three years. Organic no-till strategies eliminated the need for tillage and reduced variable costs by 14% over plow-cultivated plots, and generated ~19% greater net revenue across the study period (no-till vs tillage = US $845 vs US $711 ha−1). Terminating cereal rye with roller-crimping technology can be a positive investment in an organic soybean production system.

Soybean is a major source of vegetable oil and protein worldwide. Globally, India is among the top five producers where soybean is a major oilseed grown under diverse agro-climatic conditions by small and marginal farmers. The present study aims to identify soybean varieties with higher yield levels, resistance to pestdiseases and adaptability to climatic fluctuations. One hundred and twenty-five (125) indigenous and exotic soybean germplasm accessions and five checks were evaluated and characterized for eight agro-morphological traits at five testing locations and also screened for frog-eye leaf spot (FLS) and yellow mosaic virus (YMV) diseases under hot-spot locations during the rainy season. A wide range of variability was observed among accessions for days to 50% flowering (39–59), plant height (41–111 cm), number of nodes/plant (10–30), pod clusters/plant (14–39), number of pods/plant (40–102), days to maturity (96–115), grain yield/plant (4.89–16.54 g) and 100-seed weight (6.02–13.72 g). Among various traits, 100-seed weight (0.45), number of pods/plant (0.60) and number of pod clusters/plant (0.38) were found to be major yield-contributing traits as they exhibited highly significant correlation with grain yield/plant. Principal components PCI and PCII with eigen value >1 accounted for 42.66 and 27.08% of the total variation, respectively. Accessions G24 (EC 393222) from Taiwan and G40 (IMP-1) from the USA belonging to cluster IV were found promising for multiple yield traits and JS 20–38 from cluster III for earliness as per cluster analysis. GGE biplot average environment coordination (AEC) view revealed that the accessions viz., G11 (EC 333872), G2 (EC 251506) and G47 (TNAU-S-55) were the best performing stable genotypes in terms of grain yield/plant across locations. Twelve accessions had a high level of resistance against both FLS and YMV diseases under natural hot-spot conditions which can be utilized as promising donors in the soybean breeding programme.

Soybean is one of the chief crops producing protein and oil for human consumption. Wild soybean, the ancestor of cultivated soybean, possesses high seed protein content; therefore, it is a valuable genetic resource that could enhance protein content in the cultivated varieties. To identify the genes responsible for increasing protein content in wild soybean, a population comprising 113 BC4F6 chromosome segment substitution lines (CSSL) was developed from a cross between soybean cultivar ‘Jackson’ and wild soybean accession JWS156-1. The CSSL population was cultivated in the field conditions for 3 years (2018, 2019 and 2020), and the seeds harvested from each line were analysed for protein and oil contents by InfraTec Nova instrument. Quantitative trait locus (QTL) analysis with 243 SSR markers identified 12 QTLs associated with seed protein, oil and protein + oil contents. Among these QTLs, qPro8 and qPro19, two major and stable QTLs for protein content, were detected on chromosomes 8 and 19, respectively. No QTL for oil content was detected in the vicinity of qPro19, indicating that qPro19 did not influence the seed oil content. The effect of qPro19 was validated using near-isogenic lines (NILs) of qPro19. By introducing the qPro19 allele from wild soybean into another soybean variety, ‘Tachiyutaka’, a BC4 line, T-678, that showed enhanced seed protein content, without reducing the seed oil content. This study implied that the qPro19 allele from wild soybean could be a potential genetic resource for breeding programmes aimed to improve soybean seed quality.

Limited research has been directed at evaluating the ability of single cover crop plantings to suppress weeds in crops beyond the initial field season. Thus, this experiment was conducted to investigate the ability of a second-year self-regenerated annual and second-year perennial cover crop planting to suppress weeds during the critical period for weed control (CPWC) in soybean crops. Whole-plot treatments included 1) conventional till, 2) no-till with cover crop residue, 3) living mulch + cover crop residue, and 4) living mulch + winter-killed residue. Subplot treatments involved weed management intensity: a) no weed management (weedy), b) weeds manually removed through the CPWC (third node soybean stage; V3), and c) weeds manually removed until soybean canopy closure (weed-free). Overall, total annual cover crop biomass during the second field season was comparable to biomass obtained from direct seeded stands during the initial field season. All cover crop treatments reduced total weed biomass through the CPWC compared to conventional till. Soybean yield was low across all treatments in this experiment. Still, yield was similar between cover crop and conventional till treatments at one site-year, however, yields were lower in all cover crop treatments at the other site-year.

Investigations of the relevance of low-tunnel methodology and air sampling concerning the off-target movement of dicamba were conducted from 2018 to 2022, focused primarily on volatility. This research, divided into three experiments, evaluated the impact of herbicides and adjuvants added to dicamba and the type of surface treated on dicamba volatility. Treatment combinations included glyphosate and glufosinate, the presence of a simulated contamination rate of ammonium sulfate (AMS), the benefit of a volatility reduction agent (VRA), and a vegetated (dicamba-resistant cotton) or soil surface treated with dicamba. Volatility assessments included air sampling collected over 48 h. Dicamba treatments were applied four times to each of two bare soil or cotton trays and placed inside the tunnels. Dicamba from air samples was extracted and quantified. Field assessments included the maximum and average visible injury in bioindicator soybean and the lateral movement of dicamba damage expressed by the farthest distance from the center of the plots to the position in which plants exhibited 5% injury. Adding glufosinate and glyphosate to dicamba increased the dicamba amount in air samples. A simulated tank contamination rate of AMS (0.005% v/v) did not affect dicamba emissions compared to a treatment lacking AMS. Adding a VRA reduced dicamba in air samples by 70% compared to treatment without the adjuvant. Dicamba treatments applied on vegetation generally produced greater detectable amounts of dicamba than treatments applied to bare soil. Field assessment results usually followed differences in dicamba concentration by treatments tested. Results showed that low-tunnel methodology allowed simultaneous comparisons of several treatment combinations concerning dicamba volatility.

The whitefly, Bemisia tabaci (Gennadius) is documented as a major pest on soybean. It was reported that whitefly response towards its hosts and their cultivars varies, and is mediated through various host-related factors. Considering the significance of leaf morphological characteristics in influencing the host–whitefly responses, the present investigation was conducted in screen-house conditions to study the prevailing variations in leaf morphological characteristics of soybean genotypes and their role in governing the adult whitefly attractiveness and oviposition preference. In the multiple-choice test, the whitefly population (eggs, nymphs and adults) was found to be lowest in moderately resistant genotypes (SL 1028 and SL 1074) compared to highly susceptible (DS 3105) and susceptible genotypes (SL 688, SL 958 and SL 1113). The foliar trichomes were characterized using scanning electron microscopy and leaf area, leaf lamina thickness and leaf shape data were acquired using standard procedures. To determine the factors involved in the resistance/susceptible responses towards whitefly, Pearson correlation was applied between the morphological characteristics and the whitefly population. The results show that the leaf area, trichome density, trichome length and trichome angle showed a significant positive correlation with the whitefly population, whereas leaf lamina thickness was negatively correlated. Thus, for developing whitefly-resistant germplasm, breeders should choose genotypes having narrow and thick leaves with sparse, short and flat trichomes.

Off-target movement of 2,4-D and dicamba is sometimes to blame as the cause of symptoms observed in weeds growing in production fields. Pesticide regulatory authorities routinely sample tissues of weeds or crops from fields under investigation for potential illegal use of auxin herbicides. This research aimed to determine if analytical tests of herbicide residue on soybean or Palmer amaranth vegetation treated with dicamba or 2,4-D could be used to differentiate between rates applied and how the residue levels decay over a 1-mo interval. Four rates of each herbicide (1X, 0.1X, 0.01X, and 0.001X) were applied, with a 1X rate of dicamba and 2,4-D assumed to be 560 and 1,065 g ae ha−1, respectively. Experiments included dicamba- and 2,4-D-resistant soybean (Xtend® and Enlist® traits, respectively) and Palmer amaranth categorized by size (8 to 15 cm, 20 to 30 cm, and 35 to 50 cm in height). Analytical results show that herbicide residues were detected above detection limits of 0.04 µg g−1 for dicamba and 0.004 µg g−1 for 2,4-D, respectively, particularly for samples treated with a 1X and 0.1X rate of dicamba or 2,4-D. Nondetections were frequent, even as early as 2 to 3 d after treatment (DAT), with 0.01X and 0.001X rates of 2,4-D or dicamba. Residues declined rapidly on Xtend® soybean treated with dicamba and on Enlist® soybean treated with 2,4-D. The severity of auxin symptomology generally agreed with the ability to detect dicamba or 2,4-D residue in plant tissue for Palmer amaranth, whereas for soybean, this was not always the case. Hence detecting dicamba or 2,4-D residues in both Palmer amaranth and soybean vegetation, along with visible symptoms on both plants during investigations, would generally indicate an earlier direct application of the auxin herbicide rather than off-target movement being the cause of detection.

The development of glufosinate-resistant soybean cultivars has created opportunities for use of glufosinate applied postemergence for weed control. Four field experiments were conducted in 2021 and 2022 to ascertain the effect of glufosinate rate and the addition of ammonium sulfate on annual weed control in glyphosate/glufosinate/2,4-D–resistant soybean. An increased glufosinate rate of 500 from 300 g ai ha−1 improved control of common ragweed, common lambsquarters, redroot pigweed, and foxtail species and resulted in decreased density and dry biomass of common lambsquarters and foxtail species. The addition of ammonium sulfate to glufosinate increased control of common lambsquarters, 2 and 8 wk after application (WAA), and of foxtail species, 2, 4, and 8 WAA, but did not improve control of common ragweed and redroot pigweed. Increasing the dose of glufosinate from 300 to 500 g ai ha−1 improves control of common ragweed, redroot pigweed, common lambsquarters, and foxtail species; however, the benefit of the addition of ammonium sulfate to glufosinate is weed species-specific.