The first occurrence (FO) of the ammonite Pachydiscus neubergicus (von Hauer, 1858) has been correlated to calcareous nannofossil zonations in several European sections along the northern margin of the Tethyan palaeobiogeographic realm. Both the proposed stratotype section of Tercis (SW France) and complete, ammonite-bearing sections in northern Spain document the FO of P. neubergicus within standard nannofossil zone CC23a (UC16), below the LO of Broinsonia parca constricta. Other sections such as the type locality Neuberg (Austria), Nagoriani (the Ukraine) and Bjala (Bulgaria) indicate considerable diachroneity of local FOs and show P. neubergicus to range up to nannofossil zone CC25b/c (UC20; Late Maastrichtian).

Taphonomic analysis of Eemian marine mollusks and barnacles at Ristinge Klint on the island of Langeland (Denmark) provides a distinct record of a temporal succession in preservation states. Four different states of preservation are recognized and related to a decreasing hydrodynamic regime in the depositional setting of the Eemian Baltic Sea. The states show a deepening-upward transition from shallow bay environment towards deeper offshore environment. The depositional setting changed significantly in hydrodynamics about 620 and 1550 years into the Eemian (130,000 to 115,000 years BP), according to biostratigraphic correlation with the varves of the Bispingen succession. The taxonomic composition of the paleofauna supports such a deepening-upward interpretation with a contemporaneous change from brackish water to nearly full marine conditions. The sea bottom was affected by at least one period of oxygen deficiency. The analysis also shows that the preservation of shells varies according to differences in shell structures and life habits. Here we show how these differences should be considered in paleoenvironmental reconstructions based on taphonomic analyses. Taphonomy may play an important role in understanding the hydrodynamic conditions within the Eemian Baltic Sea.

Recent carried out core drillings in the Ludwigshafen/Speyer area permit an improved stratigrahical differentiation of the Plio-Pleistocene deposits in the northern Upper Rhine Graben. Lithofacies analysis, pollen analysis, heavy mineral analysis, and palaeomagnetical results, lead to a subdivision of ‘Kieslager’ (gravel-layers) and ‘Zwischenhorizonte’ (interlayers). In the scope of geological mapping near Mannheim and Speyer, the genesis and the stratigraphic position of Middle and Late Pleistocene fluvial terraces was re-assessed (‘Frankenthaler Terrasse’). The terrace has a complex composition, marking two phases of accretion followed by abandonment: a first phase took place in (Elsterian? to) Saalian times, the second phase during the Weichselian. Tectonism further complicates the sequence, in particular in the area between Ludwigshafen and Speyer, which is the SW rim of the ‘Heidelberger Loch’-structure. In this area ‘terraces’ occur they are the result of faulting rather than fluvial dissection alone.

Variation in human activities has greatly impacted the processes and intensities of erosion, sediment transport and storage throughout the Late Holocene, and many lowland rivers around the world have responded to these variations. Although this long-term process–response relationship has been established before, the effects of short-term (c.200-year) changes in human impact on lowland rivers are less well studied. Here, we followed an integrated approach whereby observations of floodplain changes are evaluated against detailed data on human impact for three lowland rivers in the Belgian loess belt: Dijle, Mombeek and Gete rivers. Pollen data were used to reconstruct changes in local and regional vegetation and to calculate human impact scores. Corings along transects and a database of c.160 radiocarbon ages were used to reconstruct geomorphic changes in the river valleys. Our results show a decrease in human impact between 200 and 800 AD, which can be related to the decreased population density in Europe during the first millennium AD. During this period, forests in the studied catchments regenerated, soil erosion decreased, hillslope–floodplain connectivity decreased due to the regeneration of valley-side vegetation barriers, and sediment input in the floodplain decreased. A reaction to this decreased human impact can be observed in the river valleys during the first millennium AD, with a regrowth of the alder carr forest and an increase in the organic matter content of the alluvial deposits with a local reactivation of peat growth. The observed trajectories of Belgian river valleys during the first millennium AD provide more insight into the sensitivity of these river valleys to short-term variations in human impact. These results can in turn be used to better estimate the effects of future changes in the catchments on the fluvial system.

We address aseismic fault slip and the onset of seismicity resulting from depletion-induced or injection-induced stresses in reservoirs with pre-existing vertical or inclined faults. Building on classic results, we discuss semi-analytical modelling techniques for fault slip including dislocation theory, Cauchy-type singular integral equations and the use of Chebyshev polynomials for their solution and an eigenvalue-based stability analysis. We consider slip patch development during depletion for faults with zero, constant static and slip-weakening friction, and our results confirm earlier findings based on numerical simulation, in particular the aseismic growth of two slip patches that may subsequently merge and/or become unstable resulting in nucleation of seismic slip. New findings include improved approximate expressions for the induced seismic moment per unit strike length and a description of the effect of coupling between the slip patches which affects both forward simulation and eigenvalue computation for high values of the ratio of fault throw to reservoir height. Our implementation based on analytical inversion and semi-analytical integration with Chebyshev polynomials is more efficient and more robust than our numerical integration approach. It is not yet well suited for Monte Carlo simulation, which typically requires sub-second simulation times, but with some further development that option seems to be within reach. Moreover, our results offer a possibility for embedded fault modelling in large-scale numerical simulation tools.

In the Netherlands the present-day thermal gradient in the shallow subsurface (i.e. the upper few 100 m), is around 20°C km–1, whereas at depths between 0.5 and 3 km it is ∼33°C km–1. This large contrast in the gradient between shallow and deeper parts of the subsurface occurs throughout the country and cannot be explained by either systematic thermal property changes with depth or the depositional setting of the region. In this paper we use a 1D thermal model for the crust and demonstrate that this observed temperature-depth trend most likely reflects a transient condition inherited from past climate change. It is shown that the prolonged cold period during the Weichselian (∼110–10 kya) and the subsequent warmer conditions during the Holocene account for the increase in the thermal gradient with depth. Moreover, we demonstrate that thermal history further back in time still influences the present-day subsurface temperature. Geothermal climate-change influences on these long time scales have not been documented before for the Netherlands.

One of the major scientific objectives of ESA's JUICE (JUpiter ICy moons Explorer) mission, which is scheduled for launch in 2022 and planned to arrive at the Jovian system in 2030, is to characterise the internal water ocean and overlying ice shell of Jupiter's largest moon Ganymede. As part of the strategy developed to realise this objective, the tidal response of Ganymede's interior will be constrained by JUICE's measurements of surface displacements (by the Ganymede Laser Altimeter (GALA) instrument) and variations in the gravitational potential (by the 3GM radio science package) due to the acting diurnal tides. Here we calculate the tidal response at the surface of Ganymede for several plausible internal configurations in order to analyse the relation between the tidal response and the geophysical parameters that characterise Ganymede's interior. Similarly to the case of Jupiter's smallest icy satellite Europa, the tidal response of Ganymede in the presence of a subsurface ocean, which could be as large as about 3.5 m in terms of the induced radial deformation, mostly depends on the structural (thickness, density) and rheological (rigidity, viscosity) properties of the ice-I shell. Nevertheless, the dependence of the tidal response on several geophysical parameters of the interior, in particular on the thickness and rigidity of the ice-I shell, does not allow for the unambiguous determination of the shell thickness from tidal measurements alone. Additional constraints could be provided by the measurement of forced longitudinal librations at the surface, as their amplitude is more sensitive to the rigidity than to the thickness of the shell.

From 1998 to 2000, we have studied the evidence for large paleoearthquakes at the Rurrand Fault. This fault represents the eastern border of the Roer Valley Graben, which is the tectonically most active region in the Lower Rhine Embayment. The purpose of our paleoseismological studies is to enlarge the seismicity data base for this region beyond instrumental records and historical reports using indications of surface-faulting events from stratigraphie conditions at active faults. Larger time spans considered in the earthquake catalogue will enable a more reliable statistical analysis which is required for seismic hazard assessment. Based on analyses of geological data and géomorphologie investigations, detailed geophysical surveying was carried out along the southern Rurrand Fault segment for the selection of a site appropriate to paleoseismological studies. Mapping of physical parameter contrasts with seismic reflection, VES, ERT, and GPR measurements along fault-crossing profiles inferred position and near-surface structure of the fault. At the site promising the best conditions, a trench was excavated across the fault near the city of Jiilich, Germany. Within a depth of about 4 m, the Rurrand Fault was exposed in an about 50 m-wide system of faults and fault zones, affecting the stratigraphie sequence with various displacement characteristics and amounts of throw. According to heavy mineral analyses, the deposition time of most the exposed sediment strata was assigned to Pliocene and Lower Pleistocene time. These geological units are covered by loess layers deposited through so-lifluction processes during the Weichselian glacial, i.e. some tens of ka B.P., or – with lower probability – during the Saalian glacial. Several faults which had also affected the loess reflect younger fault activity. However, clear paleoseismic features were not observed in the trench, thus an unambiguous proof of the occurrence of coseismic fault displacements could not be furnished. Recently, differential subsidence due to drainage takes place in the surroundings of the nearby opencast mining. An amount of some 0.35 m, concentrated in a very narrow lateral zone, has been observed during the last 40 a at about 1 km distance from the trench position. To date, the subsidence could not be clearly located in the trench exposure. Results from geodetic levelling campaigns will help to determine the offset residuals and to gain better insight into the ruling displacement processes at the Rurrand Fault.

The Amer fault is a 30 km long normal fault, which generated the damaging earthquakes of March and May 1427. Triangular facets, wine glass drainage basins, alluvial fans and scarps along the Amer fault mountain front provide evidence of its recent activity. Topographic profiling, electrical logging, tomographic and high-resolution seismic profiling along the northern segment of the Amer fault showed the following: i) no evidence of surface deformation in recent deposits; ii) fault scarps produced by the Amer fault located only on old alluvial fans, probably Pleistocene in age, and iii) Amer fault related deformation reaching upper Quaternary levels, but not the uppermost horizons. The high sedimentation rate (nearly one order of magnitude greater than the fault slip rate) due to the filling of the lake, which resulted from the damming of the Fluvià river by the Bosc de Tosca lava flow (17,000 yr BP), can account for the absence of surface deformation on Holocene sediments.

Biostratigraphical re-analysis of palaeobotanical data from the De Lutte-06 well clarifies an earlier controversy regarding the stratigraphical interpretation of this well based on palaeobotanical and palynological analysis. Previous biostratigraphical studies suggested an early Westphalian D age for the major part of the De Lutte formation, with only at the topmost part of the well remnants of presumable but unconfirmed Stephanian deposits. New identifications of palaeobotanical samples illustrate the presence of plant macrofossil assemblages in the De Lutte Formation characteristic for the latest Westphalian D to the Stephanian B-C. These new palaeobotanical insights, therefore, confirm a younger age for the De Lutte Formation and are more in line with the earlier palynological observations from the De Lutte-06 well that suggested that the recovered palynofloras resembled typical Stephanian associations.

The Amstel river is located in the peat-covered coastal plain of the Netherlands and gives Amsterdam its name (Amstel dam). It is a small secondary branch of the repeatedly bifurcating Rhine delta system. Historically, the Amstel debouched into the peat-fringed former Oer-IJ estuary, which was connected to the North Sea, but after the closure of this inlet the estuary was transformed into an inland sea (IJ) due to erosion of the adjacent peat. The Amstel river was active between 3000 BP and 1122 AD after which time the supply water from the Rhine was stopped due to the construction of a dam far upstream near Wijk bij Duurstede. On the basis of borehole data from various sources, four cross-sections were constructed in the Amstel branch to study the unknown lithology and lithostratigraphy of the Amstel sediments in the Amsterdam area. The deposits show the Amstel was a low-energy river which carried mainly clay. The cross-sections reveal that the Amstel in its downstream part was flanked by two lithologically identical layers of overbank clay, intercalated by a peat layer. The lowermost overbank clay was deposited from 3000 BP to about 1000 AD. The intercalated peat layer is estimated to have developed between the 11th and 12th centuries AD, indicating a decreased sediment supply in the Amstel, and rise of water level in the downstream river caused by Zuiderzee influences such as storms and tide. The uppermost overbank clay was deposited during major storm surges such as those documented in 1164 and 1170 AD, and was derived from the brackish Zuiderzee; it has been traced upstream along the Amstel for over 10 km. Near the mouth of the Amstel channel in the Oer-IJ estuary its bottom has been scoured by estuarine processes to a lower level. On the basis of archaeological and geological data it is argued that the Amstel channel of medieval Amsterdam had a water depth of about 6 m before the construction of a dam in the 13th century. Soil scientists, historical geographers and historians have argued that the Amstel once consisted of two separate rivers: a northern Oer-IJ connected channel draining from the Amsterdam Stopera to the north, and a southern peat draining channel draining from the Amsterdam-Watergraafsmeer to the south. The relatively straight stretch of the present-day Amstel now positioned within the urban area has been hypothesised to be man-made between the 11th and 13th centuries AD. In this paper, on the basis of geological arguments such as channel depths, overbank clays, peat composition and other characteristics, it is concluded that the Amstel had a natural channel in the Amsterdam area.

Shell aragonite δ180 values of unionid freshwater mussels are applied as a proxy for past river discharges in the rivers Rhine and Meuse, using a set of nine shells from selected climatic intervals during the late Holocene. A single Meuse shell derives from the Subboreal and its δ180 values are similar to modern values. The Rhine specimens represent the Subboreal, the Roman Warm Period and the Medieval Warm Period (MWP). These shells also show averages and ranges of aragonite δ180 values similar to modern specimens. This indicates that environmental conditions such as Rhine river dynamics, Alpine meltwater input and drought severity during these intervals were similar to the 20th century. These shells do not record subtle centennial to millennial climatic variation due to their relatively short lifespan and the large inter-annual and intra-seasonal variation in environmental conditions. However, they are very suitable for studying seasonal to decadal scale climate variability. The two shells with the longest lifespan appear to show decadal scale variability in reconstructed water δ180 values during the MWP, possibly forced by the North Atlantic Oscillation (NAO), which is the dominant mode of variability influencing precipitation regimes over Europe.

A number of 45 presumed pingo remnants have been analysed on lithological criteria while measured parameters of pingo remnants can be compared on a spatial scale. Methods used were hand augering and radiocarbon dating. Out of 45 cored sites thirty sites proved to represent pingo remnants after having tested the results according to the set of descriptive criteria. Does a difference in filling types in a spatial analysis influence the choice of early settlers in this region? Results show that two groups of pingo remnants can be distinguished by the nature of the pingo filling. Type 1 pingo remnants with predominantly peat filling are found in the lower valleys between the higher glacial till ridges. Type 2 pingo remnants with equal loam and peat filling are predominantly found on the higher glacial till ridges. Type 2 pingo remnants generally have a greater depth, are more ellipsoid in shape, and have a steeper slope angle than type 1 pingo remnants on the lower terrain. Results indicate that the substrate character influenced the development of infilling of pingo remnants. Marshy environments may have existed for a prolonged period throughout the Holocene in pingo remnants on the glacial ridges, while pingo remnants on the lower terrain are filled in by peat bogs. Landscape evolution based on the results of a distinct dataset of pingo remnants can help to solve archaeological problems of settlement issues when combined with new palaeobotanic data and high resolution dates.

The Late Pleistocene surface paleohydrography of the New Jersey Pine Barrens consisted of a series of broad braided alluvial surfaces with meandering paleochannels. This drainage is best explained in terms of impermeable (i.e. frozen) substrate, high sediment load, variable or decreasing discharge, and eolian sedimentary dynamics. Evidence for eolian activity is provided by wind-abraded sand grains, coversand, dunes, ventifacts, deflation hollows and wind-polished boulders. In several places stream avulsion occurred due to channel infilling by locally-derived wind-blown sediment. The braided and meandering river systems that characterise the tundra and polar semi-desert lowlands of the Western Canadian Arctic are described as modern analogs.

Bauxite, the raw material of aluminum, has been one of the economically vital natural resources for Suriname. Mining operations started about a century ago, and subsequent development of a refinery industry and hydro-electric power made Suriname one of the foremost bauxite and alumina producers worldwide for a long period of time. This paper presents a concise survey of the main geological attributes of its bauxite deposits and examines significant aspects in the development of mining in the country where alumina dominated the export revenues until a decade ago. The lateritic bauxite deposits are spread across the northern part of the country and developed on various parent rocks during Late Cretaceous–Early Tertiary times. Bauxites in the coastal lowlands formed on Cenozoic sedimentary deposits, whereas plateau bauxites originated on various crystalline rocks in inland regions of the Precambrian Guiana Shield. The composition of parent rocks and timing of bauxitisation point to a genetic correspondence with West African bauxites and a strong control of paleoclimatic conditions on the distribution and properties of bauxite in both regions. The more accessible bauxite deposits in the coastal lowlands are almost mined out, whereas the plateau bauxites have been extensively explored but have not been brought into production to date. For economic and environmental reasons, the future of the bauxite industry in Suriname is currently uncertain.

Geochemical studies on Upper Carboniferous marine bands showed that marked enrichment in redox-sensitive trace elements (uranium (U), vanadium (V), molybdenum (Mo)) mostly occur if they contain Goniatites. Goniatites indicate deposition in relatively distal and deep marine environments. In contrast, Westphalian marine bands found in the Netherlands predominantly show a Lingula facies, indicating deposition in a nearshore environment. These Lingula marine bands are mostly lacking significant trace element enrichments. The aim of this paper is to explain the mechanisms causing the differences in geochemical characteristics between distal (Goniatites facies) and proximal (Lingula facies) marine bands. Geochemical analyses (total organic carbon (TOC), sulfur (S), major and trace elements) were carried out on a selection of these marine bands. Furthermore, a comparison was made with some lacustrine bands which broadly show the same sedimentary development as the Lingula marine bands. The results show that the Lingula marine bands, in contrast to the Goniatites and lacustrine bands, are characterised by low organic carbon contents (1 – 2 wt.%). A relatively high input of siliciclastics probably prevented the accumulation of organic-rich layers (dilution effect). In turn, low organic carbon contents most likely prevented the effective scavenging of trace elements. Although the lacustrine bands are characterised by high TOC contents, here the limited availability of trace elements in fresh water forms the best explanation for low trace metal enrichments. Since marine bands form stratigraphically important horizons in the Upper Carboniferous, many attempts have been made to recognise marine bands using well logs (gamma-ray). The results from this study show that using gamma-ray devices (detecting U-enrichments), only marine bands in a Goniatites facies are clearly recognised while Lingula marine bands are not detected.

A brief overview is given of the history of geological mapping of theHolocene Rhine-Meuse delta. The first accurate map of the delta, based onfield observations, was made by Vink (1926). The geological map of theNetherlands, scale 1 : 50,000, made by the ‘Geologische Stichting’ (1927 –1938) under the supervision of P. Tesch totally neglected Vink’s work, andwas a step backwards with regard to the mapping of the Holocene delta.Between 1940 and 1965, the Wageningen group of soil scientists produceddetailed regional soil maps, that had a strong ‘geogenetic’ component. Inthe 1960’s a revolutionary ‘profile type legend’ was introduced by theNetherlands’ Geological Survey. This allowed to map not only the outcroppingsediments, but the whole Holocene succession, which gave more insight intothe geological history. Over the past 30 years, the Rhine-Meuse delta hasbeen studied extensively by students of physical geography at UtrechtUniversity. More than 250,000 borehole descriptions, 1500 14Cdates and over 36,000 archeological artifacts with associated ages(collected by the National Service for Archaeological Heritage) haveaccumulated, resulting in the largest database of a delta in the world. Theproduction of detailed maps has been crucial to the solution of manyscientific problems. The use of GIS has greatly enhanced geological andgeomorphological mapping, and subsequently, understanding of the evolutionof the Holocene Rhine-Meuse delta. A new detailed digital elevation map ofthe Netherlands, based on very accurate laser-altimetry data, will enable usto map larger areas in greater detail, with greater accuracy, and in a muchshorter period of time.

In this study we apply an evidence-based approach to model population-size fluctuations and their corresponding impact on land use during the Roman and early-medieval periods in the Rhine–Meuse delta in the present-day Netherlands. Past-population numbers are reconstructed based on Roman and early-medieval settlement patterns. Corresponding impacts of these demographic fluctuations on potential land use are calculated by integrating the newly developed demographic overviews with archaeological and geoscientific data using a new land-use model termed ‘Past Land-Use Scanner’ (PLUS). The primary aims are to reconstruct first-millennium palaeodemographics and to explore the potential of simulation modelling for testing the feasibility of archaeological hypotheses regarding past land use. Results show that in the study area the first millennium AD was characterised by two periods during which major population growth occurred: the middle-Roman period (AD 70–270) and early-medieval period C (AD 725–950). A major demographic decline of 78–85% occurred during the late-Roman period (AD 270–450), after which first-millennium population numbers never again reached middle-Roman period levels. The modelling outcomes demonstrate that the impact of population fluctuations (growth vs decline) on the limits of the natural landscape during the first millennium in general was low. During these thousand years, the natural landscape almost without exception (only scenario D deviates) provided sufficient options for arable farming, meadows and pastures and was not a limiting factor for population growth. These results underline the added value of simulation modelling for testing the feasibility of archaeological hypotheses and analysing human–landscape interactions in the past.

Depletion of the Groningen gas field has induced earthquakes, although the north of the Netherlands is a tectonically inactive region. Increased seismic activity raised public concern which led the government to initiate a number of studies with the aim of understanding the cause(s) of the earthquakes. If the relationship between production and seismicity were understood then production could be optimized in such a way that the risk of induced seismicity would be minimal. The main question remains how production is correlated with induced seismicity. The Minister of Economic Affairs of the Netherlands decided to reduce production starting from 17 January 2014, specifically in the centre of the gas field as it has the highest rates of seismicity, the largest-magnitude events and the highest compaction values of the field.

A reduction in production could possibly lead to a reduced rate of compaction. Additionally a reduction of production rate could lead to a reduced stress rate increase on the existing faults and consequently fewer seismic events per year. One might envisage a ‘bonus effect’ in the events reduction in the sense that the total number of events will be less, with the same total production smeared out over a longer period. This is as yet unclear.

In this paper we apply different statistical methods to look for evidence supporting or disproving a decrease in the number of seismic events due to production reduction.

Once the great size of the Groningen Field was fully realized late in 1963, exploration in the southern North Sea was a natural development as the reservoir bedding dipped westward. The origin of that bedding was not certain, one possibility, dune sands, led immediately to a program of desert studies.

Licensing regulations for Netherlands waters were not finalized until 1967, offshore exploration beginning with the award of First Round licenses in March 1968. In the UK area, the Continental Shelf Act came into force in May 1964, paving the way for offshore seismic, the first well being spudded late in that year. The first two wells were drilled on the large Mid North Sea High; both were dry, the targeted Rotliegend sandstones being absent. Then followed a series of Rotliegend gas discoveries, large and small, west of Groningen, so that by the time exploration began in Netherlands waters the UK monopoly market was saturated and exploration companies were already looking north for other targets including possible oil.

The Rotliegend was targeted in the earliest wells of the UK central North Sea even though there had already been a series of intriguing oil shows in Chalk and Paleocene reservoirs in Danish and Norwegian waters. These were followed early in 1968 by the discovery of gas in Paleocene turbidites at Cod, near the UK-Norway median line. The first major discovery was Ekofisk in 1969, a billion-barrel Maastrichtian to Danian Chalk field. Forties (1970) confirmed the potential of the Paleocene sands as another billion barrel find, while the small Auk Field extended the oil-bearing stratigraphy down to the Permian. In 1971, discovery of the billion-barrel Brent field in a rotated fault block started a virtual ‘stampede’ to prove-up acreage awarded in the UK Fourth Round (1972) before the 50% statutory relinquishment became effective in 1978.

Although the geology of much of the North Sea was reasonably well known by the end of the 1970s, new oil and gas reservoirs continued to be discovered during the next two decades. Exploration proved the Atlantic coast of Norway to be a gas and gas-condensate area. The stratigraphiC range of reservoirs extended down to the Carboniferous (gas) and Devonian (oil), while in the past decade, forays into the UK Atlantic Margin and offshore Ireland met with mixed success. During this hectic activity, Netherlands exploration confirmed a range of hydrocarbon-bearing reservoirs; Jurassic oil in the southern Central Graben, Jurassic-Cretaceous oil derived from a Liassic source mainly onshore and, of course, more gas from the Rotliegend. German exploration had mixed fortunes, with no commercial gas in the North Sea and high nitrogen content in Rotliegend gas in the east. Similarly in Poland, where several small Zechstein oil fields were discovered, the Rotliegend gas was nitrogen rich. The discovery of some 100 billion barrels of oil and oil equivalent beneath the waters of the North Sea since 1964 led to an enormous increase in geological knowledge, making it probably the best known area of comparable size in the World. The area had a varied history over the past 500 million years: platete-tonic movement, faulting, igneous activity, climatic change, and deposition in a variety of continental and marine environments, leading to complex geometrical relationships between source rock, reservoir and seal, and to the reasons for diagenetic changes in the quality of the reservoir sequences. Led by increasingly sophisticated seismic, drilling and wireline logging, and coupled with academic research, the North Sea developed into a giant geological laboratory where ideas were tested and extended industry-wide.