A large amplitude Trivelpiece–Gould (TG) mode, in a strongly magnetized beam–plasma system, parametrically couples to a beam space charge mode and a TG mode sideband. The density perturbation associated with the beam mode couples with the electron oscillatory velocity, due to the pump wave, to produce a nonlinear current, driving the sideband. The pump and the sideband waves exert a ponderomotive force on the electrons with a component parallel to the ambient magnetic field, driving the beam mode. For a pump wave having k0·v0b0/ω0 < 0, where ω0, k0 are the frequency and the wave number of the pump, and v0b0 is the beam velocity, the sideband is frequency upshifted. At low beam density (Compton regime) the growth rate of the parametric instability scales as two-thirds power of the pump amplitude, and one-third power of beam density. In the Raman regime, the growth rate scales as half power of beam density and linearly with pump amplitude. The background plasma has a destabilizing role on the instability.

The propagation of laser-generated hot electrons through matter and across narrow vacuum gaps is studied. We use the ATLAS titanium–sapphire laser of Max-Planck-Institut für Quantenoptik to irradiate aluminum and copper foils at intensities of up to 1019 W/cm2, generating electrons with temperatures in the megaelectron volt range. After propagating through the target the electrons are detected by means of visible Čerenkov radiation generated in a dielectric or hard X-rays emitted from an X-ray “fluor.” These diagnostics allow the electrons to be characterized with respect to their energy, number, and directionality. We also investigate the propagation of the hot electrons across narrow vacuum gaps, with a width ranging from 500 μm down to 50 μm. The effect of self-generated fields in preventing electrons from crossing the gap is demonstrated. Implications of these experiments with respect to fast ignitor physics, developing optics for fourth-generation light sources and X-ray lasers are indicated.

An ensemble of new techniques has been developed to study cell metabolism. These include: CO2 production monitoring, cell irradiation with soft X rays produced with a laser-plasma source, and study of oscillations in cell metabolic activity via spectral analysis of experimental records. Soft X-rays at about 0.9 keV, with a very low penetration in biological material, were chosen to produce damages at the metabolic level, without great interference with DNA activity. The use of a laser-plasma source allowed a fast deposition of high doses. Monitoring of CO2 production allowed us to measure cell metabolic response immediately after irradiation in a continuous and noninvasive way. Also a simple model was developed to calculate X-ray doses delivered to the different cell compartments following a Lambert–Bouguet–Beer law. Results obtained on Saccharomyces cerevisiae yeast cells in experiments performed at Rutherford Appleton Laboratory are presented.

The dependence of the high-order harmonic cutoff spectrum from the absolute phase of the laser pulse is here experimentally investigated. Noticeable shifts are observed. Their interpretation is proposed with a model based on the absolute-phase dependence of the trajectories of the photoelectrons that contribute to a given harmonic order.

SPARC and SPARX are two different initiatives toward an Italian Free Electron Laser (FEL) source operating in the Self Amplified Spontaneous Emission (SASE) mode, in which several national research institutions are involved. SPARC is a high gain FEL project devoted to provide a source of visible and VUV radiation while exploiting the SASE mechanism. An advanced Photo-Injector system, emittance compensating RF-gun plus a 150 MeV Linac, will inject a high quality e-beam into the undulator to generate high brilliance FEL radiation in the visible region at the fundamental wavelength, (∼500 nm). The production of flat top drive laser beams, high peak current bunches, and emittance compensation scheme will be investigated together with the generation of higher harmonic radiation in the VUV region. SPARX is the direct evolution of such a high gain SASE FEL toward the 13.5 and 1.5 nm operating wavelengths, at 2.5 GeV. To get the required value for the bunch peak current, Ipeak ≈ 2.5 kA, the “hybrid” scheme, RF-compression stage plus magnetic chicane, is analyzed and compared with the more standard double stage of magnetic compression. The two options are reviewed considering the tolerance to the drive laser pulse phase jitter.

The use of the Soft X-ray Contact Microscopy technique is discussed as a possible new tool to get information on dopant distribution in the core of single-mode optical fibers with 50 nm spatial resolution.

We propose to build up a facility of sub-picosecond hard X-ray pulses based on Thomson scattering between femtosecond laser pulses and relativistic electrons which is a useful tool for the purpose of material investigation, plasma diagnostics, and shock wave measurement. This article reviews the principles and the development of X-ray sources based on Thomson scattering. Then New Light Source®, the Thomson scattering X-ray facility we will develop is introduced. The characteristics of a Thomson scattering X-ray source are analyzed. A computer model of the Thomson source to be developed is described in order to provide a source of the rays used in a ray tracing method, which has proved to be an essential computer tool for designing and optimizing the optical system of high brightness X-ray facilities. A code for the ray tracing source model is created based on the Monte Carlo approach. It is able to evaluate the properties and performances of the light source under development using this model. According to the simulation results, we discuss the dependence of imaging quality and source properties including spectral distribution, emittance, flux which depends on the laser and electron beam parameters, in order to check if operation performances are as expected. We also estimate the possibility of measuring the energy spectrum of a Thomson scattering source by using a crystal diffraction method. Ray tracing calculations are performed using SHADOW program package, and a new model of Thomson scattering X-ray source which can be processed in that program is established with additional code.

The differential imaging technique is particularly suitable for the detection of small concentrations of contrasts agents for biological and medical applications in samples using X-ray radiography. In this paper, we present an application of this technique using a laser-plasma soft X-ray source combined with a bent crystal. Using a Fresnel plate as a test object, we were able to obtain spatial resolutions of the order of a few tens of microns. The use of our configuration to perform differential imaging of a test-sample at the L2 edge of Br at 1,596 eV is finally demonstrated.

We present some experimental results on X-ray spectra obtained from plasmas produced using a compact Nd:YAG laser system. The beam was focused on different targets (Cu, Al, Ge,…) and both high resolution and low resolution X-ray spectra were recorded.