For the classic diffusion description of radiative transfer, the specific intensity can be represented by a small angular deviation of the local Planckian equilibrium. In a transparent media, the angular anisotropy becomes strong and one has to solve the general transfer equation. We propose a hierarchy of models that can describe the regime that lies between those two limits. Every member of this family is hyperbolic, flux-limited, and possesses a locally dissipated entropy. This hierarchy also formally recovers the diffusion limit. This study demonstrates that the two-polynomial model is already capable of capturing strong anisotropies.

The Rayleigh–Taylor instability (RTI) of a laser-accelerated ablative surface of a thin plasma layer in an inertial fusion energy (IFE) target with incompressible electrically conducting plasma in the presence of a transverse magnetic field is investigated using linear stability analysis. A simple theory based on Stokes-lubrication approximation is proposed. It is shown that the effect of a transverse magnetic field is to reduce the growth rate of RTI considerably over the value it would have in the absence of a magnetic field. This is useful in the extraction of IFE efficiently.

The Compton scattering of a terawatt-class, femtosecond laser pulse by a high-brightness, relativistic electron beam has been demonstrated as a viable approach toward compact, tunable sources of bright, femtosecond, hard X-ray flashes. The main focus of this article is a detailed description of such a novel X-ray source, namely the PLEIADES (Picosecond Laser–Electron Inter-Action for the Dynamical Evaluation of Structures) facility at Lawrence Livermore National Laboratory. PLEIADES has produced first light at 70 keV, thus enabling critical applications, such as advanced backlighting for the National Ignition Facility and in situ time-resolved studies of high-Z materials. To date, the electron beam has been focused down to σx = σy = 27 μm rms, at 57 MeV, with 266 pC of charge, a relative energy spread of 0.2%, a normalized horizontal emittance of 3.5 mm·mrad, a normalized vertical emittance of 11 mm·mrad, and a duration of 3 ps rms. The compressed laser pulse energy at focus is 480 mJ, the pulse duration 54 fs Intensity Full Width at Half-Maximum (IFWHM), and the 1/e2 radius 36 μm. Initial X rays produced by head-on collisions between the laser and electron beams at a repetition rate of 10 Hz were captured with a cooled CCD using a CsI scintillator; the peak photon energy was approximately 78 keV, and the observed angular distribution was found to agree very well with three-dimensional codes. The current X-ray dose is 3 × 106 photons per pulse, and the inferred peak brightness exceeds 1015 photons/(mm2 × mrad2 × s × 0.1% bandwidth). Spectral measurements using calibrated foils of variable thickness are consistent with theory. Measurements of the X-ray dose as a function of the delay between the laser and electron beams show a 24-ps full width at half maximum (FWHM) window, as predicted by theory, in contrast with a measured timing jitter of 1.2 ps, which contributes to the stability of the source. In addition, K-edge radiographs of a Ta foil obtained at different electron beam energies clearly demonstrate the γ2-tunability of the source and show very good agreement with the theoretical divergence-angle dependence of the X-ray spectrum. Finally, electron bunch shortening experiments using velocity compression have also been performed and durations as short as 300 fs rms have been observed using coherent transition radiation; the corresponding inferred peak X-ray flux approaches 1019 photons/s.

The electric field in the temporal and spectral domain of coherent diffraction-limited transition radiation is studied. An electron bunch, with arbitrary longitudinal momentum distribution, propagating at normal incidence to a sharp metal-vacuum boundary with finite transverse dimension is considered. A general expression for the spatiotemporal electric field of the transition radiation is derived, and closed-form solutions for several special cases are given. The influence of parameters such as radial boundary size, electron momentum distribution, and angle of observation on the waveform (e.g., radiation pulse length and amplitude) are discussed. For a Gaussian electron bunch, the coherent radiation waveform is shown to have a single-cycle profile. Application to a novel THz source based on a laser-driven accelerator is discussed.

Laser Wake Field Acceleration of relativistic electron bunches is a promising method to produce a large amount of energetic particles with table top equipment. One of the possible methods to inject particles in the appropriate acceleration phase of the wake behind the pulse takes advantage of the partial longitudinal breaking of the wake crests across a density downramp. In this paper results of 2.5D PIC simulations, showing the production of an electron bunch with reduced energy spread, are reported. Also, a possible method to produce the required plasma density transition by laser explosion of a suitable couple of thin foils is discussed.

X-ray spectra of H-like Mg ions produced in a laser plasma have been measured by space-resolved high-resolution spectroscopy. We identified satellite lines near Lyα lines, 2lnl′ − 1snl′ + hν for n = 2, 3, and 4. We construct a collisional radiative model including the doubly excited states for the intensity ratios of satellite lines. We use atomic data calculated by different methods for satellite lines and compare the results. We derive the electron temperature and density of the laser-produced plasma by a new technique using intensity ratios of only satellite lines. This technique is useful because the Lyα lines are often affected by opacity.

In the laser–plasma interaction experiments, self-focusing and filamentation affect quite a large number of other parametric processes including stimulated scattering processes. Nonlinearity considered in the present problem is the collisional type. The coupling between the main beam, ripple, and excited electron plasma wave is strong. Authors have investigated the growing interaction of a rippled laser beam with an electron plasma wave leading to enhanced Raman scattering. An expression for scattered power is derived and the effect of the externally applied magnetic field on the enhancement of scattered power is observed. From computational results, it is observed that the effect of increased intensity of the main beam leads to suppression of power associated with the Raman scattered wave.

Experiments of heating of solid targets by fast electrons have been analyzed by means of simulations with a recently developed hybrid code. Electron propagation, refluxing effects, relative importance of self-generated fields, and heating of targets are presented. We found a good agreement between simulations and experiments on the Kα yield.

Collective absorption of intense laser pulses by atomic clusters is studied by PIC simulations. The cluster is modeled in two-dimensional calculations as a cylindrical plasma column with a diameter of D = 6.4 nm and an initial electron density of ne0 = 1023 cm−3. The frequency and intensity dependence of absorption is discussed. It is found that nonresonant absorption by electron emission increases as a power law with the laser intensity. The absorbed energy per electron reaches a maximum of about Wmax = mωp2D2 (ωp: plasma frequency, m: electron mass) at the intensity where ionization saturates.

Ray-tracing simulations of an optical X-ray system based on a spherically bent crystal operating in Bragg configuration for monochromatic projection imaging of thin samples are presented, obtained using a code developed for that purpose. The code is particularly suited for characterizing experimental arrangements routinely used with laser-produced plasma X-ray sources. In particular, the spatial resolution of the imaging system was investigated and a careful study of the complex pattern of the X-ray backlighting beam was performed.

Relativistic laser–plasma interaction, subsequent superhot electron transport, superhot electron energy deposition, and the overall implosion process are key subjects for fast ignition. All these phenomena couple with each other, and more studies by simulations are essential. We have a plan to simulate the whole of fast ignition self-consistently with four individual codes. Four codes are integrated into one big system in the Fast Ignition Integrated Interconnecting code project. In a first stage of this project, we integrate the Arbitrary Lagrangian Eulerian (ALE) hydro code with the collective particle in cell (PIC) code. The PIC code obtains density profile at maximum compression from the ALE hydro code to introduce imploded plasma into a PIC system, and we can simulate interaction between ignition laser and realistic plasma. We have evaluated reflected laser spectrum and electron energy distribution, and found many differences between the realistic plasma profile and the conventional one in PIC simulations.

Analysis and simulations of fast particles produced by a high-intensity short laser pulse interacting with a foil target are performed. Initially, the plasma density distribution of the foil target has a smooth gradient with the scale length of plasma density varying across it. The absorbed laser energy is transferred to fast electrons, which penetrate in the foil and are partially ejected from the foil rear. These electrons produce an electric field that causes an ion beam to be emitted from the foil. We analyze the mechanism of ion acceleration in the foil plasma and the influence of the density gradient and other laser and plasma parameters on ion acceleration. The angular distributions of the ejected electrons and ions are calculated.

Within the next few years X-ray free-electron lasers (XFELs) now under construction are expected to generate highly collimated XUV pulses with 1013 photons and a duration of 100 fs. Focusing this radiation to a spot some 10 μm in diameter generates intensities of up to 1016 W/cm2. Such pump intensities make feasible the investigation of photopumped XUV lasers using this radiation. We present simulations taking into account two different mechanisms generating the gain: (1) photoionization with subsequent three-body recombination, which takes advantage of the monochromaticity of the pump radiation to generate very cold electrons; (2) inner-shell ionization in which transient inversion is obtained by generating a hole in an otherwise completely filled shell. The simulations show that under appropriate conditions both mechanisms generate very high gain. However, a number of further issues must be considered, such as the propagation of the pump pulse in the medium to be pumped.

Multiple ionization of large clusters when they are irradiated by an intense ultrashort laser pulse is investigated. Different mechanisms, responsible for cluster ionization, are investigated. It is found that the ionization of large clusters, irradiated by a strong intense ultrashort laser pulse, is realized by means of the surface thermoemission.

K-α emission is an intense short-pulse line source well suited for X-ray diagnostic techniques with subpicosecond and micrometer resolution. Numerical simulations are performed here in a search for laser–target interaction regimes where both high efficiency of laser energy transformation to X-ray emission and ultrashort X-ray pulses are achieved. We use the one-dimensional PIC code for the description of the laser interaction with the plasma layer at the target surface. Fast electron transport into the target is treated by our newly developed Monte Carlo code with temporal resolution that is described here in detail. Our simulations reveal extremely short ∼200 fs FWHM bright K-α X-ray pulses emitted from targets heated by 120-fs pulses of a table-top laser. Laser energy conversion efficiency to K-α line emission as high as 6 × 10−5 is noticed. Integration of the emitted energy over the focal spot is carried out to improve the simulation accord with published experimental data. Negligible impact of self-induced electric fields on K-α emission is found for conducting target materials at moderate laser intensities [lsim ]1017 W/cm2.

The 70-year anniversary of the first nuclear fusion reaction of hydrogen isotopes by Oliphant, Harteck, and Rutherford is an opportunity to realize how beam fusion is the path for energy production, including both branches, the magnetic confinement fusion and the inertial fusion energy (IFE). It is intriguing that Oliphant's basic concept for igniting controlled fusion reactions by beams has made a comeback even for magnetic confinement plasma, after this beam fusion concept was revealed by the basically nonlinear processes of the well-known alternative of inertial confinement fusion using laser or particle beams. After reviewing the main streams of both directions some results are reported—as an example of possible alternatives—about how experiments with skin layer interaction and avoiding relativistic self-focusing of clean PW–ps laser pulses for IFE may possibly lead to a simplified fusion reactor scheme without the need for special compression of solid deuterium–tritium fuel.

The system of differential equations for the non-ablated mass, the average implosion velocity, and the ablation radius of an indirectly driven capsule in acceleration phase, has been obtained from conservation principles of hydrodynamics. Two phases are distinguished during acceleration, according to the uniformity of the velocity in the non-ablated shell. The results of the integration of this system are well compared with numerical simulation of optimized capsules. Assuming that the ablation pressure depends only on the Hohlraum temperature, the relations between the non-ablated mass, the implosion velocity, and the ablation radius are obtained for optimized temperature shape. These relations provide the maximum implosion velocity and the remaining non-ablated mass in terms of the initial capsule and the maximum temperature (or the initial capsule mass in terms of the remaining non-ablated mass) useful to determine the required ablator thickness for optimized capsules. These results are also compared with numerical simulations of different capsules.

Hot electrons may significantly influence interaction of ultrashort laser pulses with solids. Accurate consideration of resonant absorption of laser energy and hot electron generation at a critical surface was achieved through the developed physical and mathematical models. A two-dimensional (2D) ray-tracing algorithm has been developed to simulate laser beam refraction and Bremsstrahlung absorption with allowance for nonlinear influence of a strong electromagnetic field. Hot electron transport was considered as a straight-line flow weakening by a friction force calculated in the approximation of the average state of ionization. Developed models were coupled with the 2D Lagrangian gas dynamic code “ATLANT” that takes into account nonlinear heat transport. The developed program has been applied to simulate irradiation of Al foils by picosecond laser double pulses. Hot electron transport and heating resulted in thin foil explosions. The transition from the exploding foil regime to the ablative one with foil thickening has been simulated and analyzed at various values of laser light intensity. In second series of calculations we have modeled the interaction of a nanosecond iodine laser with a two-layered target.

The electron-beam-pumped KrF laser installation GARPUN with a 100-J output energy and long 100-ns pulse duration has been used to investigate laser–target interactions in a broad range of laser intensities for small (150 μm) and large (∼1 cm) irradiated spots. For higher intensities (up to 5 × 1012 W/cm2), a conical shock wave was generated in condensed matter by megabar pressure at the ablation front. It propagated with a supersonic velocity in a quasisteady manner together with a conical shock wave inside a target. Evaporated target material moving with a velocity of ∼50 km/s formed an extended plasma corona of ∼5 mm length with an electron temperature of ∼100 eV. Emission spectra of plasma have been investigated in the extreme UV range 120–250 Å. For lower intensities (108–109 W/cm2), planar shock waves in normal density air were produced with initial velocities up to 4 km/s in the forward direction and 7 km/s in the opposite direction toward incident radiation. In rarefied air, the forward shock wave kept velocities constant whereas the backward ones were accelerated up to 30 km/s. Planar compression waves in transparent condensed matter were also demonstrated propagating with sonic velocity.

Hole boring and fast ignition seem to exclude each other: When there is hole boring, no ignition occurs, and vice versa. The laser beam pressure only causes a more or less deep cone-shaped critical surface that leads to better guidance of the beam and to improved laser–plasma coupling. At laser wavelengths of the order of 1 μm, successful fast ignition requires strong anomalous laser beam–pellet coupling.