Guest Editors Olivier Lacombe, Jonas Ruh, Dennis Brown and Faramarz Nilforoushan are to be congratulated for their efforts in putting together this exciting and comprehensive special issue on basement-involved fold-and-thrust belts. On behalf of Geological Magazine, I also thank the numerous authors and reviewers, whose efforts have made the special issue possible.

Defining the structural style of fold-and-thrust belts is an important step for understanding the factors that control their long- and short-term dynamics, for comprehending seismic hazard associated with them, and for assessing their economic potential. While the thin-skinned model (no basement involvement) has long been the driving methodology for cross section construction and restoration of foreland fold-and-thrust belts, a wealth of new geological and geophysical studies have shown that they are often thick-skinned, that is, basement-involved.

Defining the structural style of fold–thrust belts and understanding the controlling factors are necessary steps towards prediction of their long-term and short-term dynamics, including seismic hazard, and to assess their potential in terms of hydrocarbon exploration. While the thin-skinned structural style has long been a fashionable view for outer parts of orogens worldwide, a wealth of new geological and geophysical studies has pointed out that a description in terms of thick-skinned deformation is, in many cases, more appropriate. This paper aims at providing a review of what we know about basement-involved shortening in foreland fold–thrust belts on the basis of the examination of selected Cenozoic orogens. After describing how structural interpretations of fold–thrust belts have evolved through time, this paper addresses how and the extent to which basement tectonics influence their geometry and their kinematics, and emphasizes the key control exerted by lithosphere rheology, including structural and thermal inheritance, and local/regional boundary conditions on the occurrence of thick-skinned tectonics in the outer parts of orogens.

The style of inversion of inherited extensional basins in the Western Alps is investigated through thermo-mechanical modelling. Two-dimensional models consist of a half-graben embedded in a relatively strong crust (basement) and filled with weak syn-rift sediments (cover). We investigate the relative influence of the internal friction (µ) of the basin-bounding normal fault, tectonic burial (h) under an overlying nappe and the geothermal gradient. We use a viscoplastic model with symmetrical shortening. The inherited normal fault is implemented as a curved thin body with a variable friction coefficient (µ) ranging from 0.1 to 0.6. The style of basin inversion is controlled at shallow depth by the internal friction coefficient, whose influence decreases with the increase of both burial depth and geothermal gradient. With increasing burial and/or geothermal gradient, fault reactivation is inhibited and distributed deformation in the basement induces the vertical extrusion of the cover. The basin inversion is accompanied by distributed deformation in the cover and by the shearing of the basin and basement interface. The results are consistent with the style of inversion of inherited half-grabens in the external Western Alps, where no significant fault reactivation occurred owing to tectonic burial underneath the Alpine internal units during the early Alpine collision.

A series of scaled analogue models are used to study (de)coupling between basement and cover deformation. Rigid basal blocks were rotated about a vertical axis in a ‘bookshelf’ fashion, which caused strike-slip faulting along the blocks and in the overlying cover units of loose sand. Three different combinations of cover–basement deformations are modelled: (i) cover shortening before basement fault movement; (ii) basement fault movement before cover shortening; and (iii) simultaneous cover shortening with basement fault movement. Results show that the effect of the basement faults depends on the timing of their reactivation. Pre- and syn-orogenic basement fault movements have a significant impact on the structural pattern of the cover units, whereas post-orogenic basement fault movement has less influence on the thickened hinterland of the overlying belt. The interaction of basement faulting and cover shortening results in the formation of rhombic structures. In models with pre- and syn-orogenic basement strike-slip faults, rhombic blocks develop as a result of shortening of the overlying cover during basement faulting. These rhombic blocks are similar in appearance to flower structures, but are different in kinematics, genesis and structural extent. We compare these model results to both the Zagros fold-and-thrust belt in southwestern Iran and the Alborz Mountains in northern Iran. Based on the model results, we conclude that the traces of basement faults in cover units rotate and migrate towards the foreland during regional shortening. As such, these traces do not necessarily indicate the actual location or orientation of the basement faults which created them.

The reactivation potential of pre-existing deep-seated structures influences deformation structures produced in subsequent compression. This contribution investigates thrust geometries produced in surface thrust sheets of the Sawtooth Range, Montana, USA, deforming over a previously faulted sedimentary section. Surface thrust fault patterns were picked using existing maps and remote sensing. Thrust location and regional transport direction was also verified in the field. These observations were used to design a series of analogue models, involving deformation of a brittle cover sequence over a lower section with varying numbers of vertical faults. A final model tested the effect of decoupling the upper cover and lower section with a ductile detachment, in a scenario closer to that of the Sawtooth Range. Results demonstrate that complexity in surface thrust sheets can be related to heterogeneity within the lower sedimentary section, even when there is a detachment between this section and the rest of the cover. This complexity is best observed in the map view, as the models do not show the deep-seated faults propagating into the cover. These results were then used to predict specific locations of discrete basement fault strands in the study area, associated with what is generally mapped as the Scapegoat-Bannatyne Trend. The deep-seated faults are more likely to be reactivated as strike-slip features in nature, given the small obliquity between the ENE-directed compression direction and the NE-oriented basement faults. More generally, these results can be used to govern evaluation of thrust belts deforming over faulted basement, and to predict the locations of specific fault strands in a region where this information is unknown.

Modelling results and seismic interpretation illustrate that the Cenozoic evolution of the Bohai Bay Basin (BBB) can be divided into different stages. A transtensional phase during Paleocene – early Oligocene time created NE-trending strike-slip faults and E–W-trending normal faults which were driven roughly by N–S–extension, making an angle of 25° with the strike-slip faults. Seismic data interpretation yields evidence that inversion phases occurred within the NE Xialiaohe Depression of the greater Bohai Bay Basin. This inversion phase is attributed to rotation and partial inversion that occurred during late Oligocene time, leading to formation of inversion structures along the NE part of Tanlu Fault. This episode is attributed to an anticlockwise rotation of the eastern part of the BBB driven by the convergence between the Pacific and Eurasian plates. The tectonic scenario described was simulated in scaled analogue models, which were extended by pulling two basement plates away from each other. Partial inversion was simulated by rotation of one of the plates relative to the other. Model results show many of the features observed in the BBB. Our model results are used to argue that, unlike the two-episode extension and whole-basin inversion models previously proposed for the BBB, a single N–S-aligned extension followed by anticlockwise rotation accounts for the Cenozoic evolution of the BBB and produces some of the structural complexities observed in the basin.

Fracture-hosted porosity and quartz distribution along with crack-seal texture and fluid inclusion assemblage sequences in isolated, bridging quartz deposits show that open fractures can persist through protracted burial and uplift in foreland basins. Fractures oriented at a high angle to current maximum compressive stress remain open and were weak mechanical discontinuities for millions of years even at great depth. Upper Cretaceous Frontier Formation sandstones in the basement-involved (Laramide) Table Rock anticline, eastern Greater Green River Basin, Wyoming sampled by two horizontal wells (cut parallel or nearly parallel to bedding and at a high angle to steeply dipping fractures) have 41.5 m of rock in four cores at depths of 4538–4547 m. Cores intersect older E-striking Set 1 fractures are abutted by or locally cross-cut by N-striking Set 2 fractures. Both sets contain quartz and porosity. Sequenced using quartz crack-seal cement texture maps, Set 1 fluid inclusion assemblage (FIA) trapping temperatures increase progressively from 140 to 165°C then decrease to c. 150°C, compatible with fracture opening over c. 15 Ma during rapid burial followed by uplift in Eocene–Oligocene time. Set 2 opened at c. 160°C, probably near maximum burial. After a period of quiescence, Set 2 reopened at c. 5 Ma at c. 140°C, on a cooling trajectory. Intermittent Set 2 movement could reflect local basement-involved fault movement, followed after a pause by further Set 2 reactivation in the modern stress field during uplift. Interpretations are sensitive to available burial/thermal histories, which have considerable uncertainty.

On the 30 May 1929, a massive earthquake occurred in the San Rafael area (southern Mendoza province) leading to the destruction of the Villa Atuel and Las Malvinas towns. The region affected by the ground shaking covers a large part of southern South America. Although no surface breaks have been detected on the surface, several authors have pointed out active faults that could be related to the event of 1929. Using satellite imagery and field observations, we investigated two active faults situated on the eastern border of the San Rafael Block (SRB) close to or within the epicentral area. The most prominent faults are the c. 40 km long Las Malvinas and c. 30 km long Cerro Negro reverse faults which are located near the epicentral area. Geological and morphological observations allow us to describe late Pleistocene activity and estimate the long-term slip rates of these faults. Possible ruptures that match our observations and which are compatible with the cartographic length of these faults would account for a seismic moment magnitude of M0 = 2.8×1019 N m and a moment magnitude of MW = 6.9. The morphological signatures of these fault segments and the occurrence of the San Rafael earthquake suggests that the southern Mendoza Province is still currently submitted to shortening.

We have conducted a structural study of both the basement-involved Malargüe fold-and-thrust belt (MFTB) and the active San Rafael Block (SRB), which are located in the Central Andes at latitude 34–36°S. Based on several field examples located both in the inner and frontal part of belt and from the distal foreland zone, we focus on the relationships between basement and cover deformation with respect to the known palaeogeography and structural inheritance. In several zones, we point out similarities in the structural and sedimentary responses to Andean shortening. The recent morphologic response has also been investigated through the analysis of active deformation along the eastern border of the SRB. We show that these structural and sedimentary processes are continuous in time and space since they can be applied in the various parts of the fold belt and also at different stages of fold-and-thrust-belt building as well. Finally, we propose the illustration of those mechanisms by complete cross-section along the Rio Grande valley and a possible kinematic scenario of deformation propagation.

Deformation and uplift in the Andes are a result of the subduction of the Nazca plate below South America. The deformation shows variations in structural style and shortening along and across the strike of the orogen, as a result of the dynamics of the subduction system and the features of the upper plate. In this work, we analyse the development of thin-skinned and thick-skinned fold and thrust belts in the Southern Central Andes (30–36°S). The pre-Andean history of the area determined the formation of different basement domains with distinct lithological compositions, as a result of terrane accretions during Palaeozoic time, the development of a widespread Permo-Triassic magmatic province and long-lasting arc activity. Basin development during Palaeozoic and Mesozoic times produced thick sedimentary successions in different parts of the study area. Based on estimations of strength for the different basement and sedimentary rocks, calculated using geophysical estimates of rock physical properties, we propose that the contrast in strength between basement and cover is the main control on structural style (thin- v. thick-skinned) and across-strike localization of shortening in the study area.

The Sierras Pampeanas of Córdoba are the easternmost uplifted blocks caused by Andean foreland deformation, over 700 km from the Chile trench. This deformation started at c. 340 Ma through basement faults, thrusts and reactivation of normal faults of the Cretaceous rift during the opening of the Atlantic Ocean. Other older faults, major oblique lineaments, were also reactivated. Thermochronological and geothermobarometric data indicate that some topographic relief could have been Palaeozoic–Mesozoic relicts and not only produced by the Andean orogeny. Faults are partially controlled by the early Cambrian S2 metamorphic foliation, coincident with the curved fault traces at map scale. During Pliocene time, two deformation phases post-dating Miocene–Pliocene magmatism are recognized. Shallow seismicity data (c. 25 km depth) indicate that the Sierras de Córdoba accommodate Quaternary displacement. Magnetotelluric studies detect the interface between the Pampia terrane and the Río de la Plata craton. The role of the oblique lineaments in the nucleation and development of the Tertiary faulting has been little considered; they could be correlated with an old pan-Gondwanan trend. During the Cretaceous period these lineaments worked in a transtensive way, producing the uplift of high-grade rocks and segmentation of the mountain chain favouring the diachronous uplift along the ranges. Recently, both the brittle–ductile transition at c. 23 km depth and the crustal thickness have been determined by seismicity analysis. The oblique lineaments displace normally the Mohorovicic discontinuity. Main basement thrusts were probably rooted in the suture between the Pampia terrane and the Río de la Plata craton.

The Sierras Pampeanas consist of basement uplifts that are mainly controlled by W-verging crustal thrusts. One of these, the Sierra Pie de Palo, is controlled by a blind thrust whose kinematics is debated. We analysed the reverse faults located along the eastern side of the range and show that these are characterized by small displacements (few hundreds of metres) of the Neogene and Quaternary deposits controlled by the inherited basement metamorphic foliation and shear zones. At the sierra scale, the inherited foliation pattern appears already folded, before the Cenozoic shortening, forming a series of antiforms and synforms with various wavelengths. We propose that this structure is amplified during the Plio-Quaternary shortening, resulting in a large asymmetrical basement-cored anticline where foliation-parallel slip can act as folding mechanism. The overall kinematics is consistent with an E-verging fault-propagation fold; this proposed kinematics is an alternative to the frequently suggested W-verging fault-bend fold model. Finally, we propose a new, alternative and speculative crustal and lithospheric structure for this region consisting of two E-verging basement thrusts coeval to W-verging Pampean thrusts, both rooting below the Precordillera, above an eclogitized lower crust.

A balanced cross-section spanning the Eastern Cordillera and Subandean Zone of southern Peru (13–15°S) constrains ~130 km (38%) of Cenozoic orogen-normal SW–NE Andean deformation accommodated by thick- and thin-skinned retro–arc fold–thrust belt shortening that overprinted pre-Andean Triassic normal faults. Zircon and apatite (U–Th)/He ages demonstrate continuous Oligocene to Miocene cooling of the Permo-Triassic Coasa pluton in the Eastern Cordillera. Zircon (U–Th)/He ages (~34–18 Ma) are reset and define a steep age versus elevation relationship. Apatite (U–Th)/He results reveal reset ages that define two spatially separated groups with ages of ~30–26 Ma and ~17–11 Ma. Detrital zircon U–Pb geochronologic results from Cretaceous–Cenozoic siliciclastic rocks from the Altiplano/Eastern Cordillera record Andean fold–thrust belt and magmatic-arc sediment sources. Correlative Subandean Zone rocks preserve a cratonic sediment contribution, with minor Andean sediment appearing in some Cenozoic rocks. We propose that earliest Andean deformation and structural compartmentalization of the Eastern Cordillera was linked to selective inversion of inherited Permo-Triassic basement-involved normal faults that guided subsequent thick- and thin-skinned deformation. Provenance variations between the hinterland and foreland depocentres reveal competing eastern and western sediment sources, reflecting an axial zone in the Eastern Cordillera that coincided with the inherited Triassic graben and impeded sediment source mixing. Our zircon and apatite (U–Th)/He ages are consistent with published constraints along strike and support pulses of Eocene to late Miocene exhumation that were likely driven by normal fault reactivation and protracted Eastern Cordillera deformation.

In the southern Central Andes, the Andean foreland was deformed due to Neogene shallowing of the Nazca slab beneath the South America plate. In this 27–33ºS Pampean flat-slab segment, the N-trending Argentine Precordillera transpressional fold-and-thrust belt and the Sierras Pampeanas broken foreland developed as a consequence of inward migration of the orogenic front. At 28ºS, a NNE-trending westward-dipping, thick Neogene synorogenic sequence is exposed in the Sierra de los Colorados, which shares deformation features of the Precordillera and the Sierras Pampeanas. Integration of new structural and kinematic data and available structural, kinematic, geophysical and palaeomagnetic information allows consideration of the Sierra de los Colorados area as part of the northern sector of the Precordillera during the middle Neogene. At c. 9 Ma, basement block exhumation started with the uplift of the Sierra de Umango-Espinal that was triggered by deformation along the NE-trending Tucumán oblique belt. This stage marked the beginning of compartmentalization of the incipiently deformed Vinchina foreland. Since c. 6.8–6.1 Ma, basement block uplift linked to the Miranda–Chepes and Valle Fértil NNW-trending sinistral transpressional belts, as well as kinking of the Neogene sequence by localized WNW-striking cross-strike structures, resulted in multiple segmentation that produced a complex mosaic of basement-block pieces. The overprint of these regional, basement-involved, oblique, brittle–ductile transpressional and cross-strike megazones could be related to high interplate coupling. Localized mechanical and rheological changes introduced by magmatism favoured this thick-skinned deformation overprint.

Andean Cenozoic shortening within the Malargüe fold–thrust belt of west-central Argentina has been dominated by basement faults largely influenced by pre-existing Mesozoic rift structures of the Neuquén basin system. The basement contractional structures, however, diverge from many classic inversion geometries in that they formed large hanging-wall anticlines with steeply dipping frontal forelimbs and structural relief in the order of several kilometres. During Cenozoic E–W shortening, the reactivated basement faults propagated into cover strata, feeding slip to shallow thrust systems that were later carried in piggyback fashion above newly formed basement structures, yielding complex thick- and thin-skinned structural relationships. In the adjacent foreland, Cenozoic clastic strata recorded the broad kinematic evolution of the fold–thrust belt. We present a set of structural cross-sections supported by regional surface maps and industry seismic and well data, along with new stratigraphic information for associated Neogene synorogenic foreland basin fill. Collectively, these results provide important constraints on the temporal and geometric linkages between the deeper basement faults (including both reactivated and newly formed structures) and shallow thin-skinned thrust systems, which, in turn, offer insights for the understanding of hydrocarbon systems in the actively explored Neuquén region of the Andean orogenic belt.

The deformation of continental crust during continental collision by folding and thrusting follows three types of structural styles: (1) in a true thin-skinned style only cover rocks are involved; (2) in the case of a thin-skinned basement-involved style, thin slabs of crystalline basement rocks are piled up into a nappe stack; (3) in a true thick-skinned style, the entire upper crust is involved in the deformation. In the Alps all three styles can be recognized. The Helvetic nappes and parts of the Penninic nappes exhibit true thin-skinned style tectonics. Triassic evaporites, Jurassic shales and Cretaceous marls acted as detachment horizons. Basement-involved thin-skinned tectonics is typical for the Penninic nappes in the core of the orogen. The thickness of the basement thrust sheets is controlled by the effects of Mesozoic rifting, by deep burial and heating of the subducting crust and by the presence of Late Palaeozoic structures. Thick-skinned style is observed in the more external parts of the orogen, the external massifs and the Southalpine nappe system. It occurred in the late phase of collision and involved the entire upper crust. The basal detachment occurred possibly along phyllonites generated by the breakdown of load-bearing feldspar. Considering the Alpine orogen as a whole, the lower crust deformed seemingly independently from the upper crust. The detachment of the cover units by thin-skinned tectonics occurred prior to thrusting related to basement-involved thin-skinned tectonics. Thrust faults of both types were overprinted by ‘post-nappe folding’.

The late Eocene – early Miocene Alpine–Carpathian fold-and-thrust belt (FTB) lies in the transition between the Eastern Alps and the Western Carpathians, SE of the Bohemian crystalline massif. Our study shows the involvement of crystalline basement from the former European Jurassic continental margin in two distinct events. A first extensional event coeval with Eggerian–Karpatian (c. 28–16 Ma) thin-skinned thrusting reactivated the rift basement fault array and resulted from the large degree of lower plate bending promoted by high lateral gradients of lithospheric strength and slab pull forces. Slab break-off during the final stages of collision around Karpatian times (c. 17–16 Ma) promoted large-wavelength uplift and an excessive topographic load. This load was reduced by broadening the orogenic wedge through the reactivation of the lower-plate deep detachment beneath and ahead of the thin-skinned thrust front (with the accompanying positive inversion of the basement fault array) and ultimately, by the collapse of the hinterland summits, enhanced by transtensional faulting. Although this work specifically deals with the involvement of the basement in the Alpine–Carpathian Junction, the main conclusions are of general interest to the understanding of orogenic systems.

Three models are evaluated for restoring basement rocks coring tectonic windows (Window-Basement) in the Scandinavian Caledonides; parautochthonous (Model I) and allochthonous (models II/III), with initial imbrication of the Window-Basement post-dating or pre-dating, respectively, that in the external imbricate zone (Lower Allochthon). In Model I, the Window-Basement comes from the eastern margin of the basin now imbricated into the Lower Allochthon, while in models II/III it comes from the western margin. In Model II, the Window-Basement formed a basement-high between Tonian and Cryogenian sediments imbricated into the Middle and Lower allochthons; in Model III deposition of the Lower Allochthon sediments commenced in Ediacaran times. Balanced cross-sections and branch-line restorations of four transects (Finnmark–Troms, Västerbotten–Nordland, Jämtland–Trøndelag, Telemark–Møre og Romsdal) show similar restored lengths for the models in two transects and longer restorations for models II/III in the other transects. Model I can result in c. 280 km wide gaps in the restored Lower Allochthon, evidence for which is not seen in the sedimentology. The presence of <3 km thick alluvial-fan deposits at the base of the Middle Allochthon indicates proximal, rapidly uplifting basement during Tonian–Cryogenian periods, taken as the origin of the Window-Basement during thrusting in models II/III. Model I requires multiple changes in thrusting-direction and predicts major thrusts or back-thrusts, currently unrecognized, separating parts of the Lower Allochthon; neither are required in models II/III. Metamorphic data are consistent with models II/III. Despite considerable along-strike structural variability in the external Scandinavian Caledonides, models II/III are preferred for the restoration of the Window-Basement.

In the foreland area of western Taiwan, some of the pre-orogenic basement-involved normal faults were reactivated during the subsequent compressional tectonics. The main purpose of this paper is to investigate the role played by the pre-existing normal faults in the recent tectonics of western Taiwan. In NW Taiwan, reactivated normal faults with a strike-slip component have developed by linkage of reactivated single pre-existing normal faults in the foreland basin and acted as transverse structures for low-angle thrusts in the outer fold-and-thrust belt. In the later stage of their development, the transverse structures were thrusted and appear underneath the low-angle thrusts or became tear faults in the inner fold-and-thrust belt. In SW Taiwan, where the foreland basin is lacking normal fault reactivation, the pre-existing normal faults passively acted as ramp for the low-angle thrusts in the inner fold-and-thrust belt. Some of the active faults in western Taiwan may also be related to reactivated normal faults with right-lateral slip component. Some main earthquake shocks related to either strike-slip or thrust fault plane solution occurred on reactivated normal faults, implying a relationship between the pre-existing normal fault and the triggering of the recent major earthquakes. Along-strike contrast in structural style of normal fault reactivation gives rise to different characteristics of the deformation front for different parts of the foreland area in western Taiwan. Variations in the degree of normal fault reactivation also provide some insights into the way the crust embedding the pre-existing normal faults deformed in response to orogenic contraction.