A method using 1,10-phenanthroline (phen) to quantify Fe(II) and total Fe in nonrefractory minerals was modified to improve the accuracy and precision and to eliminate the inconvenience of performing much of the analysis under darkroom conditions. Reagents were combined to minimize solution-handling errors, volumes of the reagent additions were determined gravimetrically and the acid-matrix solution was preheated to near-boiling before sample contact. The darkness requirement, which stems from the photoreduction of Fe(III) to Fe(II) in the presence of phen, was eliminated by the use of opaque amber-colored high-density-polyethylene bottles during the digestion step and for storage of the digestate and subsequent dilutions before Fe(II) analysis. Reduction of Fe(III) for total-Fe analysis was accomplished either by exposure to light from a Hg-vapor lamp or by reaction with hydroxylamine, NH2OH. Although the minimum periods required for adequate reduction ranged from 1.5 to 4 h, the optimum reduction periods were between 6 and 10 h. When standard samples containing Fe(II) and MnCl2 were digested and analyzed for total-Fe using the light treatment (with incidental heating to 35–45 °C), significant decreases and in some instances, oscillations, in absorptivity were obtained. Similar experiments with NH2OH, or with CrCl3 showed no effect. The absorptivity of most digestates stored in opaque bottles was stable for at least 2 weeks, although digestates with Mn concentrations above 3 µg mL−1 showed proportional decreases in absorptivity. Analysis of 8 geochemical reference materials by the modified method (using NH2OH) yielded excellent agreement with published values and a mean relative standard deviation of 0.6%. Total-Fe results obtained using the light treatment, however, were generally lower (∼2% relative) than the NH2OH values, although this difference decreased with longer irradiation periods. Use of NH2OH was deemed preferable because it was simpler, faster, minimized interferences from Mn and eliminated the need for specialized apparatus. Lastly, MICA Fe was shown to be unreliable as a primary reference material for Fe(II) determinations.

The behavior of fine-grained mineral systems is dependent on pore-fluid characteristics. The systematic analysis of previously published studies supports the development of a fabric map in the pH and ionic concentration space as a working hypothesis. This conceptual study is complemented with an extensive battery of tests where surface charge and particle interactions are controlled through pore-fluid characteristics. The macro-scale tests include sedimentation, viscosity and liquid limit, and involve a wide range of solid volume fractions (suspension to sediment) and strain levels. Experimental results permit the development of an updated fabric map on the pH-ionic concentration space which takes into consideration all experimental results. The fabric map is structured around a critical pH level and a threshold ionic concentration beyond which van der Waals attraction prevails.

The smectite to illite reaction was studied by transmission and analytical electron microscopy (TEM/AEM) in argillaceous sediments from depths of 1750, 2450, and 5500 m in a Gulf Coast well. Smectite was texturally characterized as having wavy 10- to 13-Å layers with a high density of edge-dislocations, and illite, as having relatively defect-free straight 10-Å layers. The structures of smectite and illite were not continuous parallel to (001) at smectite-illite interfaces. AEM data showed that the smectite and illite were chemically distinct although smectite had a more variable composition. Illite formation appeared to have initiated with the growth of small packets of illite layers within subparallel layers of smectite matrix. With increasing depth, ubiquitous thin packets of illite layers increased in size until they coalesced.

A model for the transition requires that the structure of smectite was largely disrupted at the illite-smectite interface and reconstituted as illite, with concomitant changes in the chemistry of octahedral and tetrahedral sites. At least partial Na-K exchange of smectite preceded illite formation. Transport of reactants (K, Al) and products (Na, Si, Fe, Mg, H20) through the surrounding smectite matrix may have taken place along dislocations.

The smectite-to-illite conversion process for the studied samples does not necessarily appear to have required mixed-layer illite/smectite as an intermediate phase, and TEM and AEM data from unexpanded samples were found to be incompatible with the existence of mixed-layer illite/smectite in specimens whose XRD patterns indicated its presence.

Investigations were conducted to determine the hydrothermal transformations of synthetic birnessite exchanged with different metal ions. Autoclaving in a Teflon-lined stainless steel pressure vessel at 155°C for 24 hr of Mg-, Ca-, La-, and Co-saturated birnessite yielded manganese minerals having 10-Å X-ray powder diffraction (XRD) spacings. The autoclaved Mg-birnessite yielded a mineral identical to natural todorokite in its infrared (IR) spectrum and XRD patterns. High-resolution transmission electron microscopy (HRTEM) provided images having 10-, 12.5-, 15-, and 20-Å wide fringes indicating heterogeneous channel widths in the crystallographic a direction, and IR spectroscopy produced bands at 757, 635, 552, 515, 460, and 435 cm-1, confirming the product obtained by autoclaving Mg-birnessite to be todorokite. Prolonged autoclaving of Mg-birnessite yielded manganite (γ-MnOOH) as a by-product; manganite did not form when the autoclaving time was shortened to 8 hr. Also, when Ca-saturated samples were autoclaved, the product gave d-values of 10 Å, but the XRD lines were broad and heterogeneity of the channel sizes was evident from HRTEM observations. The Ca-derivative had an IR spectrum similar to that of natural todorokite. Images showing 10-Å lattice fringes were observed by HRTEM for the Ni-saturated sample, which also produced an XRD pattern similar to that of the Mg-saturated sample. Co- and Lasaturated samples did not form todorokite, although HRTEM of La-saturated samples indicated some 10-Å lattice fringes that were unstable in the electron beam. Birnessite saturated with Na, K, NH4, Cs, Ba, or Mn(II) gave products having 7-Å spacings upon autoclaving.

Synthetic sodium bimessite, having a cation-exchange capacity (CEC) of 240 meq/100 g (cmol/kg) was transformed into Li, K, Mg, Ca, Sr, Ni, and Mn2+ cationic forms by ion exchange in an aqueous medium. Competitive adsorption studies of Ni and Ba vs. Mg showed a strong preference for Ni and Ba by bimessite. The product of Mg2+-exchange was buserite, which showed a basal spacing of 9.6 Å (22°C, relative humidity (RH) = 54%), which on drying at 105°C under vacuum collapsed to 7 Å. Of the cation- saturated bimessites with 7-Å basal spacing, only Li-, Na-, Mg-, and Ca-bimessites showed cation exchange.

Heating bimessite saturated with cations other than K produced a disordered phase between 200° and 400°C, which transformed to well-crystallized phases at 600°C. K-exchanged bimessite did not transform to a disordered phase; rather a topotactic transformation to cryptomelane was observed. Generally the larger cations, K, Ba, and Sr, gave rise to hollandite-type structures. Mn- and Ni-bimessite transformed to bixbyite-type products, and Mg-bimessite (buserite) transformed to a hausmannite-type product. Li-bimessite transformed to cryptomelane and at higher temperature converted to hausmannite. The hollandite-type products retained the morphology of the parent bimessite. The mineralogy of final products were controlled by the saturating cation. Products obtained by heating natural bimessite were similar to those obtained by heating bimessite saturated with transition elements.

The objective of the present study was to investigate changes in the structural, textural, and surface properties of tubular halloysite under heating, which are significant in the applications of halloysite as functional materials but have received scant attention in comparison with kaolinite. Samples of a purified halloysite were heated at various temperatures up to 1400°C, and then characterized by X-ray diffraction, electron microscopy, Fourier-transform infrared spectroscopy, thermal analysis, and nitrogen adsorption. The thermal decomposition of halloysite involved three major steps. During dehydroxylation at 500–900°C, the silica and alumina originally in the tetrahedral and octahedral sheets, respectively, were increasingly separated, resulting in a loss of long-range order. Nanosized (5–40 nm) γ-Al2O3 was formed in the second step at 1000–1100°C. The third step was the formation of a mullite-like phase from 1200 to 1400°C and cristobalite at 1400°C. The rough tubular morphology and the mesoporosity of halloysite remained largely intact as long as the heating temperature was <900°C. Calcination at 1000°C led to distortion of the tubular nanoparticles. Calcination at higher temperatures caused further distortion and then destruction of the tubular structure. The formation of hydroxyl groups on the outer surfaces of the tubes during the disconnection and disordering of the original tetrahedral and octahedral sheets was revealed for the first time. These hydroxyl groups were active for grafting modification by an organosilane (γ-aminopropyltriethoxysilane), pointing to some very promising potential uses of halloysite for ceramic materials or as fillers for novel clay-polymer nanocomposites.

High-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction (SAED), annular dark-field scanning transmission electron microscope (STEM) images, and electron nano-diffraction were used to examine structures of synthetic 2- and 6-line ferrihydrite specimens. HRTEM images of 2-line ferrihydrite (2LFh) show scattered small (~1-3 nm) areas with lattice fringes surrounded by areas free of fringes. All SAED patterns show two bright rings corresponding to d-values of ~0.15 and 0.25 nm; each ring has a conspicuous shoulder on each side. Faint rings corresponding to d-values of 0.08, 0.095, 0.100, 0.106-0.114 (very broad ring), and 0.122 nm are visible in strongly exposed SAED patterns. Nanodiffraction patterns show conspicuous streaks and a lack of superlattice formation.

HRTEM images of 6-line ferrihydrite (6LFh) display larger crystallites (typically ~5-6 nm) with lattice fringes visible in many thin areas. SAED patterns show rings corresponding to d-values of 0.148, 0.156, 0.176, 0.202, 0.227, and 0.25-0.26 nm and a shoulder extending between d-values of ~0.25 and 0.32 nm. Faint rings corresponding to d-values of 0.086, 0.093, 0.107, 0.112, 0.119, 0.125, and 0.135 nm are visible in strongly exposed SAED patterns. Small quantities of hematite, magnetite or maghemite, and an acicular material tentatively identified as goethite were observed in the 6-line ferrihydrite, but these quantities do not contribute significantly to the overall diffracted intensity from the sample.

We report on how the effects of mechanical compaction and clay mineral diagenesis have affected the alignment of phyllosilicates in a suite of Miocene-Pliocene mudstones buried to sub-seabed depths of between 1.8 and 5.8 km in the deep-water Gulf of Mexico. Mechanical compaction has reduced the porosity of the samples to 15% at 5 km, with modal pore sizes between 10 and 20 nm. High-resolution X-ray texture goniometry data show that the intense mechanical compaction has not resulted in a strongly aligned phyllosilicate fabric. The muds were apparently deposited with a weak or isotropic phyllosilicate fabric which was not substantially realigned by mechanical compaction. Unusually, X-ray diffraction of <0.2 µm separates shows that: (1) there is no illitization trend between 90 and 120°C; and (2) discrete smectite persists to ∼120°C, coexisting with R1 I-S or R0 I-S with 30–40% expandable layers. Between 120 and 130°C, discrete smectite disappears and the expandability of I-S decreases to ∼25–30%. We propose a two-stage diagenetic process involving (1) the alteration of volcanic glass to smectite and (2) the illitization of smectite and I-S; the alteration of glass results in smectite without a preferred orientation and retards the illitization reaction. We suggest that the lack of a strongly aligned phyllosilicate fabric reflects the apparently limited extent of illitization, and thus recrystallization, to which these mudstones have been subjected.

The boiling 5-M-NaOH treatment was found to aid in the identification and characterization of goethite and hematite by effectively concentrating the two Fe oxides in kaolinitic-gibbsitic soil clays. No transformations of goethite to hematite or hematite to goethite were detected, but poorly crystalline, highly Al-substituted goethite was found to dissolve and recrystallize into a more well-crystalline, less Al-substituted goethite in samples low in Si. The Si released from kaolinite was sufficient to block goethite dissolution and recrystallization in kaolinitic samples, but noncrystalline silica had to be added to samples rich in gibbsite to minimize this effect.

Hydroxy-carboxylic acids inhibit the crystallization of ferrihydrite in the pH range 9–11 in the order

citric > meso tartaric > L-tartaric ≫ lactic

and favor hematite formation relative to goethite in the order

L-tartaric > citric > meso tartaric > lactic.

The crystal shape of hematite can change from hexagonal plates to acicular in the presence of these acids. The influence of the acids on the crystallization rises with increasing concentration and with falling pH.

The effectiveness in suppressing crystallization depends on whether and how strongly the acid adsorbs on ferrihydrite and how strongly it complexes with Fe3+ in solution. Inhibition of crystallization of hematite is believed to be due to the di- and tricarboxylic acid linking ferrihydrite particles in an immobile network. Goethite formation is suppressed by the acid complexing with Fe in solution and hindering nucleation; strongly adsorbing acids also adsorb on the nuclei and hinder further growth. Certain acids can induce hematite formation because they contain a group which acts as a template for nucleation of hematite.

The thermal stability of surfactant-modified clays plays a key role in the synthesis and processing of organoclay-based nanocomposites. Differential thermal analysis (DTA), thermogravimetric measurement and differential scanning calorimetry (DSC) were used in this study to characterize the thermal stability of hexadecyltrimethylammonium bromide-modified montmorillonites prepared at different surfactant concentrations. Analysis by DSC shows that the molecular environment of the surfactant within the montmorillonite galleries is different from that in the bulk state. The endothermic peak at 70–100°C in the DTA curves of the modified montmorillonites is attributed to both the surfactant phase transformation and the loss of free and interlayer water. With an increase of surfactant-packing density, the amount of water residing in the modified montmorillonite decreases gradually, reflecting the improvement of the hydrophobic property for the organoclay. However, the increase in the surfactant packing density within the galleries leads to a decrease in the thermal stability of the organoclays.

With an increase of initial surfactant concentration for the preparation of organoclays, the surfactant- packing density increases gradually to a ‘saturated’ state. It was found that the cationic surfactant was introduced into the montmorillonite interlayer not only by cation exchange but also by physical adsorption.

A thorough understanding of the capacity of clay minerals to adsorb radiocesium is essential in order to predict the fate of this pollutant in the environment and to interpret routine measurements, such as desorbability. We have investigated the adsorption of radiocesium onto 2 contrasting reference clay minerals in dilute suspensions after a 2-h contact period. The results have been expressed as the distribution coefficient, Kd, or the selectivity coefficient, Kc. The adsorption properties have been studied with respect to various parameters: nature of the charge compensating cation, ionic strength, concentration of Cs, concentration of K and concentration of a soil-extracted fulvic acid.

A Freundlich isotherm has been found to fit experimental data well for levels of adsorbed cesium in the range 10−7 to 1 mol kg−1. Evidence of surface heterogeneity is discussed, but it was not possible to deduce the exchange capacities of the groups of exchange sites with differing affinities for Cs, which are thought to exist in illites. The concentration dependence of adsorption upon montmorillonite is postulated to arise from a modification of the exchange complex with increasing presence of Cs, rather than from heterogeneity of exchange sites. Increasing ionic strength caused a decrease in the relative affinity for a trace amount of cesium on both minerals, although mass action led to a fall in Kd. This is thought to indicate a high covalent interaction between Cs and the clay surface.

Potassium caused a smaller decrease in adsorption than stable Cs, which suggests that neither K nor NH4 plays a decisive role in the immobilization of radiocesium by clay minerals. There was a small decrease in adsorption upon addition of soil organic matter, which may contribute to the poor fixation capacity observed for some soils with a high organic matter content.

A cation-exchange capacity (CEC) method based on ion-sieving properties was developed for the quantitative determination of clinoptilolite in soils. In this method, both zeolitic and non-zeolitic exchange sites in the soil sample are saturated with Na+. The CEC of the non-zeolitic exchange sites is determined by replacing the Na− in these sites with tert-butylammonium ions. The tert-butylammonium ion cannot be exchanged into the zeolitic exchange sites because it is too large to pass through the channels in the clinoptilolite structure. The sample is next washed with NH4OAc to replace the Na+ in the zeolitic exchange sites. The amount of soil zeolite is then estimated by comparing the CEC of zeolitic exchange sites to the total zeolite CEC (175 meq/100 g for pure clinoptilolite). Prior to the CEC analyses, carbonates and organic matter must be removed to minimize interference with the exchange process. A high correlation (r2 = .96) was observed between the abundance of clinoptilolite estimated using the CEC method and the abundance estimated by semiquantitative X-ray powder diffraction analysis.

The CEC procedure was used to quantify clinoptilolite in an Aridic Calciustoll soil from south Texas. About 2–5% clinoptilolite occurs in the A and B horizons, and concentrations progressively increase with soil depth to as much as 20% in the CBk2 horizon.

The highest frequency near-infrared (NIR) combination bands for specimens of four species of mica—montmorillonite-beidellite, illite, chlorite, and kaolinite—were correlated with respect to Al2O3 content. A direct linear correlation was found between the combination band positions and the Al2O3 contents of the montmorillonite-beidellite series, which may be given as: ν̄ cm−1 = (5.38 ± 0.04) (% Al2O3) + (4412.8 ± 0.9). A similar linear correlation for muscovite is: ν̄ cm−1 = (6.10 ± 0.25) (% Al2O3) + (4434.1 ± 8.3).

Possible NIR band interferences are shown for different mineral mixtures, along with the correlation of different illites with muscovite. No combination bands were found in the frequency region 4425 cm−1 to 4625 cm−1 for specimens in which the Al2O3 content was only in the tetrahedral layer sites.

The transformation of ferrihydrite to goethite and/or hematite in alkaline media is strongly retarded by the presence of silicate species. These species probably stabilize ferrihydrite by adsorbing on the particles of ferrihydrite and linking them into an immobile network.

At concentrations low enough for the transformation to proceed, silicate species promote the formation of hematite and hinder the nucleation of goethite. The presence of silicate species modifies the morphology of both reaction products. Hematite forms ellipsoidal single crystals, commonly displaying outgrowths of goethite. Silicate species in solution appear to enhance the development of the (021) faces of goethite, probably by preferential adsorption on these faces; at high levels of silicate species, goethite crystals adopt a pseudohexagonal habit. This morphology has not been observed previously for goethite.

An environmental infrared microbalance (EIRM) cell was used to study H2O sorption on two montmorillonite samples as a function of water content and type of exchangeable cation. The vibrational spectra showed that H2O sorbed to the clay at low-water content was strongly influenced by the exchangeable cation and by the close proximity to the clay surface. At water contents <6 H20 molecules per exchangeable cation, the H-O-H bending mode of H2O (v2 mode) shifts to a lower frequency and is characterized by an increase in molar absorptivity. In contrast, the positions of the asymmetric and symmetric OH-stretching modes of sorbed water (v1 and v3 modes) shift to higher energies. These observations indicate that H2O molecules sorbed to the clay surface at low-water content are less hydrogen bonded than in bulk H2O. In addition, the vibrational-stretching and bending bands of the structural OH groups of the 2:1 layer are also strongly influenced by H2O content and type of exchangeable cation. By using the EIRM cell, the molar absorptivities of the structural OH-bending vibrations were measured as a function of H2O content. The position and molar absorptivity of the structural OH-bending bands at 920, 883, and 840 cm-1 are strongly influenced by H2O content and type of exchangeable cation. The molar absorptivity of the 920-cm-1 band, which is assigned to the AlAlOH group, decreased strongly at low-H2O content. This reduction in intensity is assigned to a dehydration-induced change in orientation of the structural OH groups resulting from the penetration of H2O molecules into siloxane ditrigonal cavities that are not associated with a net negative charge from isomorphous substitutions.

An improved model for the interpretation of thermal effects during dehydroxylation in aluminous dioctahedral 2:1 layer phyllosilicates considers trans-vacant (tv) and cis-vacant (cv) 2:1 layers and leads to very different temperatures of dehydroxylation for these tv and cv vacant modifications. In particular, smectites and illites consisting of cv 2:1 layers are characterized by dehydroxylated temperatures which are higher by 150°C to 200°C than those for the same minerals consisting of the tv 2:1 layers. A considerable lengthening of the OH-OH edges in cv 2:1 layers in comparison with the OH-OH edges in the tv 2:1 layers is postulated as the reason for the higher dehydroxylation.

Dehydroxylation in aluminous cv 2:1 layer silicates should occur in two stages. Initially, each two adjacent OH groups are replaced by a residual oxygen atom and the Al cations, which originally occupied cis -and trans-sites, become 5- and 6-coordinated, respectively. The structure of 2:1 layers corresponding to this stage of the dehydroxylation is unstable. Thus the Al cations migrate from the former trans-sites to vacant pentagonal prisms. The resulting dehydroxylated structure of the original cv 2:1 layers is similar to that of the former tv 2:1 layers.

Diffraction and structural features of the cv dehydroxylates predicted by the model are in agreement with X-ray diffraction effects observed for cv illite, illite-smectite and montmorillonite samples heated to different temperatures. In particular, the diffusion of Al cations to empty five-fold prisms during dehydroxylation of the tv 2:1 layers explains why dehydroxylation of reheated cv montmorillonites occurs at temperatures lower by 150°C to 200°C than samples that were not recycled.

The migration of small cations into the empty octahedral sites of dioctahedral clays allows one to study the local effects in the trioctahedral structure and the consequences of the exchange capacity decrease on the solvation properties. The results concern essentially the montmorillonite saturated by lithium. Computations based on a point charge model shows the necessity for the OH groups to undergo a reorientation when the lithium ions are within the octahedral sites. This change of orientation was studied by i.r. spectroscopy which permits one to estimate the amounts of lithium present in the structure. By analogy with i.r. results obtained for the Li, Mg, Ca and K montmorillonites, one can say that the non-exchangeable lithium which is not within the octahedral sites must be in the bottom of the hexagonal cavities. Moreover, it is shown that the solvation properties of the clay depend on the number of exchangeable cations and on the nature of the solvent. The clay does not swell with water when the amount of exchangeable cation is lower than 50 per cent of the exchange capacity. This limit is 30 per cent with glycerol, and 20 per cent with ethylene glycol.

Twelve nontronites and two ferruginous smectites have been characterized with respect to Fe3+ occupancy of tetrahedral sites. The techniques used were near infrared, Fe-K X-ray absorption near-edge and X-ray absorption fine-structure spectroscopies, along with two X-ray diffraction techniques. The results show that calculations of the structural formulae of many nontronites should be adjusted to include Fe3+ in tetrahedral sites. The nontronite from Spokane County, Washington, (∼44% Fe2O3) is essentially an end-member with its non-siliceous tetrahedral sites occupied by Fe3+. Samples with chemical compositions similar to Garfield nontronite (∼36.5% Fe2O3) may have small amounts (<5% of total Fe3+) of tetrahedral Fe3+. Tetrahedral Fe3+ is unlikely to be present in samples containing less than ∼34% Fe2O3.

A model is presented to explain why tubular halloysite rolls in preference to tetrahedral rotation to correct misfit of the octahedral and tetrahedral sheets. It is shown that the rolling mechanism operates as it encounters significantly less resistance from Si-Si repulsion in comparison to tetrahedral rotation to correct the same amount of misfit. The model explains the observed and experimental rolling of planar kaolinites to form tubular halloysite upon hydration and exfoliation.