The experimental 7AD rotor blade is assessed for flutter stability in hover to identify the influence of aerodynamic contributions related to blade aerofoil, rotor inflow and wake periodicity on flutter onset. For the aeroelastic analyses, the multibody model is tightly coupled with an unsteady aerodynamic model based on Wagner’s function and related enhancements for the general motion of an aerofoil section considering heave and pitch. The mathematical setup of the approximated Wagner function in state space is extended for axial flow to include unsteady effects related to rotor inflow and wake periodicity. Since the aerodynamic model is based on indicial response functions, a separation of these contributions is possible and allows for the study of their impact on rotor blade flutter. The according flutter results are extracted in terms of frequency and damping behaviour for three test cases that differ in the unsteady aerodynamic model for circulation comprising blade aerofoil, rotor inflow and wake periodicity. As known for articulated rotor blades, also the 7AD blade exhibits a classical bending-torsion coupling. The lowest flutter onset is found for unsteady aerodynamics limited to blade aerofoil, whilst the cases with added rotor inflow and wake periodicity show both the same flutter onset at a 5% larger rotor speed. Here, the influence of rotor inflow plays the major role, since it increases the torsion damping within the critical flutter coupling. Added wake periodicity neither changes frequency nor damping and, hence, does not affect the aeroelastic coupling.

This paper presents a study of the effects of the durability and level of energy storage technology on energy management strategies and the performance of hybrid electric turboprops. The results highlight the key role of battery energy density on the durability of the battery pack and the viability of the concept of hybrid electric aircraft. Additionally, the trade-off between zero-day environmental compatibility and battery lifetime is identified, caused by the size of the pack. The effective energy density would decrease with the aging of the cells, leaving a significant inert mass and increasing fuel consumption. Optimal energy management strategies are suggested in light of this new information. Higher specific energy of the pack would mitigate this aspect, along with a reduction in fuel consumption and ${\rm{N}}{{\rm{O}}_{\rm{x}}}$ emissions. Indeed, the improvement of environmental compatibility was found to be nonlinear with a positive rate, suggesting high returns in investing in great improvements in energy density over a gradual increase. This result relates to the results of the statistical technological forecast presented in this study, which, without an increase in funding, predicts the availability of the specific energy required to match the fuel-only baseline in the 2040–2050 decade.

The enhancement of jet engine components may result in the expansion of the established design space. In particular, the trend towards short and therefore highly aggressive inter compressor ducts (ICD) extends the traditional design space. The potential for fuel savings resulting from a reduction in engine weight is in contrast to the emergence of a more complex flow field. Many studies consider the secondary flow system of highly aggressive ICDs at the design point, but there is a lack of off-design considerations. To fill this gap, the present study investigates in detail the off-design performance of the new German Aerospace Center (DLR) test case. Firstly, computational fluid dynamics (CFD) simulations of different typical operating points allow detailed considerations of the flow field under off-design conditions. Secondly, a variation of the inlet conditions describes the sensitivity of highly aggressive ICDs to different low-pressure compressor operating points. Finally, the comparison of the CFD stagnation pressure loss with the loss predicted by a preliminary off-design method validates the use of traditional off-design prediction during the preliminary design of highly aggressive ICDs.

In the past few decades, substantial work has been directed towards the design of aircraft structures that maximise fuel efficiency, improve performance and curtail emissions. Aeroelastic optimisation offers an effective way to devise lightweight and fuel efficient structures, with structural stability constraints often driving the design. To date, the aeroelastic optimisation community has relied mostly on linear buckling predictions for the evaluation of structural stability constraints, mainly because of their conservativeness, computational efficiency and simplicity of implementation. This approach typically leads to overly conservative buckling margins, and this over-conservativeness places a glass ceiling over the load carrying capacity of wing structures, consequently restricting the exploration of regions within the design space where considerable weight savings could be achieved.

By contrast to previous works that predominantly rely on linear buckling constraints, the present paper introduces a method to incorporate nonlinear structural stability analysis into aeroelastic optimisations of wingbox-like structures. The method relies on the evaluation of the positive-definiteness of the tangent stiffness matrix, which is an indicator of structural stability. The sign of the stiffness eigenvalues is monitored while tracing the load-displacement equilibrium paths by means of the arc-length method, thus pinpointing the onset of instability. The proposed constraint is tested in a proof of concept structural optimisation of an idealised version of the CRM wingbox. This optimisation shows a $10.9{\rm{\% }} $ reduction in mass with respect to a baseline design that is optimal with a linear buckling approach, promising great potential for application to more realistic aeroelastic optimisations.

If an aircraft’s initial mass, the variation of true airspeed, true rate of climb, wind speed and wind direction with time and the relationship between barometric altitude and local temperature are known, the performance along the entire flight path can be determined. Previously published work has provided the building blocks for a simple, fast, open-source and transparent method to estimate the instantaneous fuel flow rate and the engine overall efficiency, plus several other performance characteristics for turbofan powered, civil transport aircraft. The flight phases of primary interest are the climb, cruise, descent and holding, when the flaps and undercarriage are fully retracted and the engine is providing significant, positive thrust. However, for completeness, an approximate relation is provided for the engine’s ‘flight idle’ condition, together with simple estimates for fuel use during take-off and landing, plus a factor to allow for in-service deterioration. Detailed consideration is also given to the operating limits and relations are developed for the estimation of their location in Mach number and flight level space. To apply the method, a series of characteristic coefficients and constants must be known. Estimates for these quantities have been progressively improved and extended over time. Initially, results were published for 53 aircraft types and variants. The data base has now been extended to 67 entries and this is given in tabular form. Finally, to demonstrate the method’s accuracy, estimates of fuel flow rate are compared with flight data recorder values for 20 complete flights of six different aircraft types.

Measuring the aerodynamics and stability characteristics of small unmanned aerial vehicles (sUAVs) operating at Reynolds numbers below $60,000$ is a challenge. Conventional measurement methods can be impractical and costly due to the vehicle’s size and the considerably low forces and moments involved. To overcome these limitations, the current study aims at utilising an existing motion tracking system to conduct off-board aerodynamic measurements of sUAVs. Six sUAVs, with varying wing aspect ratios, are investigated in un-powered, glide flight mode to establish the utility of the motion capture system as an aerodynamic characterisation system and understand the low Reynolds number effects on the flight dynamics. The trajectory tracking system was thoroughly validated through a series of static and dynamic tests to account for uncertainties and errors. Subsequently, flight trajectory data was collected and processed to extract the aircraft’s force and moment characteristics under quasi-steady conditions. The measured lift, drag and moment data compared well with existing literature and theoretical predictions. Longitudinal, lateral and dynamic stability derivatives were also accurately captured. Key findings from the current work included an inverse relationship between the wing aspect ratio and lift curve slope and substantially lower Oswald efficiency factors, both of which were attributed to low Reynolds number effects.

Contrails are a major contributor to the climate effect of aviation. Mitigation efforts and technological improvements aim to reduce the contrail climate effect. Many currently discussed innovations (like using sustainable aviation fuels (SAFs) or hydrogen) affect the physical processes and phenomena during contrail formation. Hence, understanding and analysing contrail formation is of great importance in the context of climate research. Ice crystal formation in a nascent contrail is completed within the first seconds after the engine exhaust is emitted. In the past, numerical models treating this early stage typically involved either a 3D or 0D approach. Whereas 3D models are computationally expensive, restricting the number of simulations that could be performed, less expensive 0D models allow to explore a larger parameter space but neglect plume heterogeneity and use a prescribed plume dilution. We present the new dynamical framework RadMod for contrail formation simulations that describes the evolution of a turbulent round jet emitted from an aircraft engine. Relative to large-eddy simulation (LES) or Reynolds-averaged Navier-Stokes (RANS) 3D models of contrail formation, our model is computationally less expensive, enabling extensive parameter studies. The model accounts for the mixing of the hot and moist exhaust air with the cold ambient air through the solution of the two-dimensional advection-diffusion equation of momentum, temperature, and water vapour. The validation of our model is conducted through comparisons with empirical relationships and CFD results. In the near future, this model will be combined with an existing microphysical model, resulting in a contrail formation model of intermediate complexity.

This paper aims to explore the feasibility of providing boundary layer propulsion and flow control by means of embedded aerofoils that are oscillating in the pure plunge mode. To this end, Navier-Stokes calculations of the low-speed flow over a flat plate with an oscillating small foil in close vicinity to the plate were performed to determine the influence of the wall distance, Reynolds number, and reduced frequency on the aerofoil thrust. The simulations were extensively validated against water tunnel experiments at Reynolds numbers between 440 to 5,940. Good agreement was obtained in terms of mean streamwise velocity profiles and the vortical wake patterns. Results indicate that the thrust increases from its value in unbounded flow with decreasing distance from the plate. The propulsive efficiency exhibits a consistent peak at a non-dimensional plunge velocity of about 0.55. For wall distances between one-half to one chord lengths, vortex pairs are shed in a slightly upward deflected direction independent of the starting motion of the aerofoil. As the wall distance increases further, these vortex pairs change into the well-known reverse Karman vortex street. Example calculations for a flat plate with two foils mounted close to the plate trailing edge and oscillating in counterphase confirm the device’s efficacy.

Propulsive fuselage aircraft complement the two under-wing turbofans of current aircraft with an embedded propulsion system within the airframe to ingest the energy-rich fuselage boundary layer. The key design features of this embedding are examined and related to an aero-propulsive performance assessment undertaken in the absolute reference frame which is believed to best evaluate these effects with intuitive physics-based interpretations. First, this study completes previous investigations on the potential for energy recovery for different fuselage slenderness ratios to characterise the aerodynamics sensitivity to morphed fuselage-tail design changes and potential performance before integrating fully circumferential propulsors. Its installation design space is then explored with macro design parameters (position, size and operating conditions) where an optimum suggests up to 11% fuel savings during cruise and up to 16% when introducing compact nacelles and re-scaling of the under-wing turbofans. Overall, this work provides valuable insights for designers and aerodynamicists on the potential performance of their concepts to meet the environmental targets of future aircraft.

In recent times, there has been increased focus on the utilisation of virtual reality flight simulators in flight training, driven by their advantages compared to conventional methods. However, a paucity of empirical evidence has prevented their widespread introduction and regulatory approval. Existing research focuses on single-user simulators, leaving a gap in studies of collaborative training within virtual environments. Consequently, this paper investigates evidence-based simulator training within a collaborative virtual environment.

A mixed methods approach was adopted, where behaviours related to industry-standard competencies were observed in a virtual reality complex aircraft and thematic analysis applied to a post-experiment participant debrief. The findings showcase the feasibility of utilising a collaborative virtual environment for evidence-based training purposes in scenarios aligned to typical initial First Officer airline training programmes, which is a precursor to supplementing traditional professional pilot training techniques. In addition, the study found that the visual barriers imposed by head-mounted displays were overcome through the adoption of refined communication strategies, thus laying the groundwork for physically separated multi-crew pilot training.

Current literature offers limited mass estimation methodologies and their application in the conceptual or preliminary design stages of moderate to high aspect ratio wings with electric, hydrogen or distributed propulsions. This study presents the development and application of a quasi-analytical wing mass estimation method to address this limitation. The proposed method is distinguished from the existing mass estimation methods by its expanded realistic load cases, sensitivity to several design parameters, improved accuracy with short computational time and capabilities for future applications. To achieve these features, new geometric models are introduced; 483 load cases including symmetric manoeuvre, rolling, and combined cases are covered following airworthiness requirements; the structural elements are idealised and sized with strength and buckling criteria; existing methods are evaluated and integrated cautiously for secondary structures and non-optimum masses. A computation time of 0.1s is accomplished for one load case. The developed method achieved the highest accuracy with an average error of -2.2% and a standard error of 1.8% for wing mass estimates compared with six existing methods, benchmarked against thirteen wings of different aircraft categories. The effects of engine numbers with dual- to 16-engine setups and the dry wing concepts on the wing mass are investigated. The optimised number of engines and their locations decreased the wing mass of the high aspect ratio wing significantly. In contrast, the dry wing design increased the wing masses of all baseline aircraft. The future applications and improvements of the presented method in novel configurations and multidisciplinary designed optimisation studies are explained.

A demonstration of a fully onboard method for generating background oriented schlieren (BOS) data on a jet exhaust is presented. Readily available commercial camera equipment is used to capture in-flight imagery of a miniature jet engine exhaust mounted on a custom-built model aircraft. The setup for image acquisition and processing algorithms are described. A new process for registration of images to reduce the degrading effects of vibration and flexure of the airframe are developed and presented along with the underpinning BOS algorithm. Results show that jet flows can be visualised using this technique using a contained system on a single aircraft and demonstrate how a simple technique, such as BOS, can be democratised to such an extent that the cost of conducting in-flight jet measurements can be reduced to the budget of any model aircraft flyer.

The world is currently undergoing a technological transformation with numerous innovative concepts emerging. This shift is driven by remarkable advancements in artificial intelligence and the urgent need for decarbonisation. With this comes a growing demand for skilled engineers who can actively contribute at any stage within the life cycle of a product. This can be the generation of new concepts at low Technology Readiness Levels or contributing actively to their development and operational safety. This paper explores the integration of a 1-day practical activity to reinforce theoretical concepts learned within a classroom-based environment. Small groups of students were given the opportunity of engaging with a small helicopter engine (Rolls-Royce Gnome engine) through the disassembly and reassembly of the exhaust and power turbine section while following the manufacturer’s manual and ensuring industrial norms for safe practice. This hands-on activity included an introduction to tooling, a Gnome familiarisation activity, and an introduction to inspection techniques. Based on the feedback recorded, the students experienced a notable improvement in their basic understanding by effectively reinforcing knowledge acquired within the classroom through active engagement with an actual gas turbine engine.

This paper investigates the take-off performance of a single engine battery-electric aeroplane, using the example of the 300kg Sherwood eKub. It shows analysis of take-off performance of such an aeroplane must include as a minimum two new parameters not normally considered: time at full throttle and state of charge. It was shown in both ground and flight test that the state of available power reduces both as the throttle is fully open, and as battery charge is consumed, although recovers partially when power is reduced for a period. It is possible to schedule take-off performance as a function of the usual parameters plus state of charge. Because of the reducing climb performance with use of state of charge, and the requirement in airworthiness standards for minimum climb performance being available, it becomes necessary to introduce the concept of minimum-indicated state of charge for take-off, SoCiMTO; means to calculate that are shown for compliance with both microlight aeroplane standards and larger aeroplane standards, and the calculations are demonstrated for the eKub. Conclusions are also drawn about the use of commercial products SkyDemon and Google Earth for recording and analysing aeroplane performance data.

Reynolds-Averaged Navier–Stokes (RANS) simulations, both steady and unsteady, are used to investigate supersonic, chemically reacting, flow fields inside a strut-stabilised supersonic combustion ramjet (scramjet) engine operating under different fuel flow rates. Fully supersonic, fully subsonic and mixed modes of operations inside the combustor, obtained at different fuel flow rates, are studied numerically through shock wave visualisations and top-wall static-pressure probing. The effect of changing fuel flow rates, imposed both suddenly and gradually, on the behaviour of shock waves and wall pressure profiles are studied in detail. For certain modes of combustion characterised by the presence of oblique shocks at the strut, shockwaves in the combustor respond predictably to an increase or decrease in fuel flow rate attaining the steady state flow fields as predicted by RANS simulations for those fuel flow rates. For certain other modes of combustion, characterised by the presence of shockwaves in the isolator and the absence of oblique shocks at the leading edge of the strut, shockwaves in the flow field appear unstable to fuel flow rate modulations. For such cases, any change in fuel flow rates, sudden or gradual, increase or decrease, causes the isolator shocks to immediately move upstream and eventually out of the isolator. A plausible physics-based explanation of the observed phenomena is presented.

This paper presents a comprehensive evaluation of reduced-order models (ROMs) for the determination of pressure coefficient distributions on supersonic and hypersonic bodies. The study investigates the limitations, aerodynamic precision and computational performance associated with various methodologies, ranging from simplistic Newtonian theory-based approaches to more advanced first and second-order shock-expansion theories. Validation is performed by comparing computed results with experimental and computational data for pressure distributions, drag and lift coefficients and centres of pressure for fundamental geometries and authentic vehicle design over a wide range of freestream conditions. The study also includes a comprehensive computational complexity analysis, demonstrating the superiority of finite-element ROM approaches over traditional finite-volume computational fluid dynamics (CFD) simulations. The primary objective of this paper is to scrutinise the extension of these methodological classes to the low supersonic regime. Hence, thermo-chemical reactions within the flow are disregarded, and the ideal gas law is adopted. A value of $\gamma = 1.4$ is chosen for consistency and comparability across the analyses. The proposed ROMs show remarkable potential for reducing high-speed simulation execution times by four orders of magnitude, maintaining accuracy within 20 per cent and as low as 1 per cent. The study unveils three key findings: first, the accuracy degradation of Newtonian-based theories for inclined elements, particularly around 45 degrees, and their reduced dependency on Mach number at large inclination. Secondly, the study presents novel insights into the impact of shock-wave-Mach-wave interactions on pressure distribution calculations, emphasising the Mach number as a crucial metric governing recompression effects. Lastly, the study demonstrates the exceptional accuracy of DeJarnette’s method, providing ${C_P}$ results within 2 per cent for a wide range of conditions, offering an attractive alternative to the Taylor-Maccoll equation.

Effusion cooling is the state-of-the-art cooling technology for gas turbine hot-gas path components. Typically, effusion cooling holes across the entire combustor liner are aligned with the combustor axis, rendering a nominal zero compound angle between highly directional miniature effusion cooling jets and the main flow direction. The pitch of effusion cooling holes is optimised accordingly. However, the swirling main flow results in a non-zero compound angle and an effectively different pitch from the design. The directional effect of effusion cooling as a result of swirling main flow on the adiabatic film cooling effectiveness (AFE) is a combined effect of a non-zero compound angle and a varied pitch. The current experimental study aims to investigate the isolated effects of compound angle on AFE by excluding the influences of varying pitch. With an improved understanding of the sole effects of non-zero compound angles on AFE, the roles that a varied pitch plays in modifying AFE are further discussed to guide future effusion cooling designs under swirling main flow conditions. Binary pressure sensitive paint (PSP) was used to determine AFE experimentally.

Damage initiation hotspots around features, such as bolts and ply drops, must be investigated during the preliminary design phase of large composite structures, such as composite airframes. A global-local modelling approach is commonly employed to perform this investigation, whereby a global low-fidelity model is used to drive high-fidelity local models around the features of interest. However, this methodology is slow, repetitive and expert-dependent. In this investigation, we address these issues by applying machine learning techniques to this global-local modelling framework and demonstrate the time-saving benefit when predicting damage initiation of bolted composite joints. Feature engineering of model inputs and outputs, and appropriate customisation of machine learning methods enables damage initiation prediction. Special consideration is given to the boundary conditions that must be varied to simulate the response of the bolted composite joints. Results show over three orders of magnitude time-saving benefit and satisfactory accuracy of the proposed methodology. This indicates its potential to be developed further into a rapid design and optimisation tool.

The Aerospace Integration Research Centre (AIRC) at Cranfield University offers industry and academia an open environment to explore the opportunities for efficient integration of aircraft systems. As a part of the centre, Cranfield University, Rolls-Royce, and DCA Design International jointly have developed the Future Systems Simulator (FSS) for the purpose of research and development in areas such as human factors in aviation, single-pilot operations, future cockpit design, aircraft electrification, and alternative control approaches. Utilising the state-of-the-art modularity principles in simulation technology, the FSS is built to simulate a diverse range of current and novel aircraft, enabling researchers and industry partners to conduct experiments rapidly and efficiently. Central to the requirement, a unique, user-experience-centred development and design process is implemented for the development of the FSS. This paper presents the development process of such a flight simulator with an innovative flight deck. Furthermore, the paper demonstrates the FSS’s capabilities through case studies. The cutting-edge versatility and flexibility of the FSS are demonstrated through the diverse example research case studies. In the final section, the authors provide guidance for the development of an engineering flight simulator based on lessons learned in this project.

The variability in ground manoeuvre occurrences for aircraft landing gear is intrinsically linked to the airport geometries served by aircraft in-service and consequently, the cyclic loads that landing gear carry are driven by the route network and characteristics of aircraft operators. Currently, assumptions must be made when deriving fatigue load spectra for aircraft landing gear, which may fail to capture the operator characteristics, potentially leading to design conservatism. This paper presents the enhanced characterisation of ground turning manoeuvres within the Automatic Dependent Surveillance-Broadcast (ADS-B) trajectories for six narrow-body aircraft across a full-service carrier (FSC) and a low-cost carrier (LCC) fleet. The methodology presented within this paper employs ADS-B latitude and longitude information to overcome limitations of previous approaches, increasing the rate of correct manoeuvre identification within ADS-B trajectories to 77% of flights from the 50% rate achieved previously. When characterising the ground manoeuvres across 3,000 flights, significant differences in manoeuvre occurrences were observed between individual aircraft within the LCC fleet and between the FSC and LCC fleets. The occurrence of tight and pivot turns were shown to vary across the six aircraft with six and eight fatigue-critical turns being performed by the FSC and LCC fleet for every 10 flights performed. In addition, it was observed that the direction of fatigue critical turns is biased in specific directions, suggesting that individual main landing gear assemblies will accumulate fatigue damage at an increased rate, leading to greater justification for operator-specific spectra and structural health monitoring of aircraft landing gear.