Direct numerical simulations are performed to investigate the characteristics of a turbulent core–annular flow with water-lubricated high viscosity oil in a horizontal pipe. Six different superficial velocity ratios ($\,j_w/j_o = 0.057\unicode{x2013}0.41$) are examined by changing the water superficial velocity $j_w$ for a fixed oil superficial velocity $j_o$. The pressure drops in the pipe and the shapes of the phase interface agree well with those from previous experiments. The oil core flow is almost a plug flow, and the gaps between the phase interface and pipe wall are narrow and wide near the upper and lower surfaces of the pipe, respectively, due to the buoyancy. Within a narrow gap, water is confined mostly in a valley region of the wavy phase interface and hardly goes through its crest. On the other hand, water near the phase interface at a wide gap convects downstream almost at the core speed and the flow near the wall is similar to that of single-phase wall-bounded turbulent flow. The annular flow is characterized by three different regimes depending on the clearance Reynolds number ($Re_c$) based on the core velocity and local gap size: laminar Couette flow driven by the core for $Re_c \le 600$, transitional flow for $600 < Re_c < 2500$ and turbulent flow for $Re_c \ge 2500$. The minimum pressure drop occurs at $j_w/j_o = 0.11$ in the early transition regime. For all $j_w/j_o$ considered, the negative lift force acting on the core comes from the pressure force which balances the buoyancy.

Birds employ rapid pitch-up motions close to the ground for different purposes: perching birds use this motion to decelerate and come to a complete stop while hunting birds, such as bald eagles, employ it to catch prey and swiftly fly away. Motivated by these observations, our study investigates how natural flyers accomplish diverse flying objectives by rapidly pitching their wings while decelerating near ground. We conducted experimental and analytical investigations focusing on rapidly pitching plates during deceleration in close proximity to the ground to explore the impact of ground proximity on the unsteady dynamics. Initially, we executed synchronous pitch-up motion, where both pitching and deceleration have the same motion duration, at different ground heights. Experimental results demonstrate that as the pitching wing approaches the ground, the instantaneous lift increases by approximately $38\,\%$ compared with a far-from-ground case, while the initial peak drag force remains relatively unchanged. Our analytical model conforms to this trend, predicting an increase in lift force as the wing approaches the ground, indicating enhanced added mass and circulatory lift force due to the ground effect. Next, we examined asynchronous pitch-up motion cases, where rapid pitching motions were initiated at different stages of deceleration. The results reveal that initiating the wing pitch early in the deceleration leads to the formation of larger counter-rotating vortices at the early stage of the manoeuvre. These vortices generate stronger dipole jets that orient backward in the later stages of the manoeuvre after impinging with the ground surface, which hunting birds utilize to accelerate after catching prey. Conversely, when the wing pitch is delayed, smaller vortices form, but their growth is postponed until late in the manoeuvre. This delayed vortex growth produces lift and drag force at the end phase of the manoeuvre that facilitates a smooth landing or perching. Thus, through strategic tuning of a rapid pitch-up motion with deceleration, natural flyers, such as birds, achieve diverse flying objectives.

The transient processes of laminar separation bubble (LSB) formation and bursting on a rectangular NACA 0018 wing are studied experimentally. A two-dimensional airfoil model is used as a baseline for the assessment of finite wing effects. The models are subjected to ramp changes in free-stream velocity causing the flow to switch between a state where an LSB forms and a state without reattachment. Lift force and particle image velocimetry measurements are used to relate the flow development to the aerodynamic loading. The lift coefficient of the airfoil exhibits substantial hysteresis, and the duration of the lift transients range from $10$ to $22$ convective time scales for bubble formation and $22$ to $30$ convective time scales for bursting. In contrast, the transient lift coefficients of the wing change gradually, with less hysteresis. The wing tip causes greater three-dimensionality in the separation bubble, whose thickness increases near the midspan where bursting is initiated. During bubble formation, the region of separated flow contracts towards the midspan. The gradual change in lift of the wing is linked to slower spanwise expansion and contraction of the separated flow region relative to the airfoil. On both models, the wavenumbers and amplitudes of disturbances in the separated shear layer rapidly change when reattachment initiates or ceases. Applying the bursting criterion of Gaster (Tech. Rep. Reports and Memoranda 3595. Aeronautical Research Council, London, 1967) to the bubble on the wing shows that bursting of the bubble at a single spanwise location is insufficient to cause complete spanwise failure of reattachment, and that the relationship between bursting parameters depends on spanwise position.

The wall-attached structure characteristics of flow and dust concentration fields are investigated in this study based on high-Reynolds-number ($Re_{\tau } \sim O(10^{6})$) synchronous multiphase observations from the Qingtu Lake observation array site (recorded by Liu et al., J. Fluid Mech., vol. 957, 2023, A14). The results show that not only the particle-free flow field but also the particle-laden flow and dust concentration field contain wall-attached structures. The linear coherence spectrum, as a data-driven filter, is adopted to separate the wall-attached portions from the premultiplied spectra. The decomposed spectra for wall-attached structures in streamwise velocity fluctuations under particle-free and particle-laden conditions show obvious outer-scaling and wall-scaling at large-scale and medium-scale ranges, respectively, but the spectra of dust concentration exhibit only wall-scaling rather than outer-scaling. The streamwise length of the most significant wall-attached dust clustering structures in the logarithmic region is approximately five times the boundary layer thickness, and does not change significantly with height. Furthermore, the streamwise turbulence intensity for wall-attached portions follows the universal Townsend–Perry constant, without particle mass loading effect. Correspondingly, the wall-attached portions of the dust concentration also exhibit universal logarithmic decay slope. The remaining non-attached portions for the turbulent velocity and dust concentration have significant dependence on the particle mass loading.

Studying liquid jet impacts on a liquid pool is crucial for various engineering and environmental applications. During jet impact, the free surface of the pool deforms and a cavity is generated. Simultaneously, the free surface of the cavity extends radially outward and forms a rim. Eventually the cavity collapses by means of gas inertia and surface tension. Our numerical investigation using an axisymmetric model in Basilisk C explores cavity collapse dynamics under different impact velocities and gas densities. We validate our model against theory and experiments across a previously unexplored parameter range. Our results show two distinct regimes in the cavity collapse mechanism. By considering forces pulling along the interface, we derive scaling arguments for the time of closure and maximum radius of the cavity, based on the Weber number. For jets with uniform constant velocity from tip to tail and $We \leqslant 150$, the cavity closure is capillary-dominated and happens below the surface (deep seal). In contrast, for $We \geqslant 180$ the cavity closure happens above the surface (surface seal) and is dominated by the gas entrainment and the pressure gradient that it causes. Additionally, we monitor gas velocity and pressure throughout the impact process. This analysis reveals three critical moments of maximum gas velocity: before impact, at the instant of cavity collapse and during droplet ejection following cavity collapse. Our results provide information for understanding pollutant transport during droplet impacts on large bodies of water, and other engineering applications, like additive manufacturing, lithography and needle-free injections.

We study the instantaneous inference of an unbounded planar flow from sparse noisy pressure measurements. The true flow field comprises one or more regularized point vortices of various strength and size. We interpret the true flow's measurements with a vortex estimator, also consisting of regularized vortices, and attempt to infer the positions and strengths of this estimator assuming little prior knowledge. The problem often has several possible solutions, many due to a variety of symmetries. To deal with this ill posedness and to quantify the uncertainty, we develop the vortex estimator in a Bayesian setting. We use Markov-chain Monte Carlo and a Gaussian mixture model to sample and categorize the probable vortex states in the posterior distribution, tailoring the prior to avoid spurious solutions. Through experiments with one or more true vortices, we reveal many aspects of the vortex inference problem. With fewer sensors than states, the estimator infers a manifold of equally possible states. Using one more sensor than states ensures that no cases of rank deficiency arise. Uncertainty grows rapidly with distance when a vortex lies outside of the vicinity of the sensors. Vortex size cannot be reliably inferred, but the position and strength of a larger vortex can be estimated with a much smaller one. In estimates of multiple vortices their individual signs are discernible because of the nonlinear coupling in the pressure. When the true vortex state is inferred from an estimator of fewer vortices, the estimate approximately aggregates the true vortices where possible.

Applying a variational analysis, a minimum-enstrophy vortex in three-dimensional (3-D) fluids with continuous stratification is found, under the quasi-geostrophic hypothesis. The buoyancy frequency is held constant. This vortex is an ideal limiting state in a flow with an enstrophy decay while energy and generalized angular momentum remain fixed. The variational method used to obtain two-dimensional (2-D) minimum-enstrophy vortices is applied here to 3-D integral quantities. The solution from the first-order variation is expanded on a basis of orthogonal spherical Bessel functions. By computing second-order variations, the solution is found to be a true minimum in enstrophy. This solution is weakly unstable when inserted in a numerical code of the quasi-geostrophic equations. After a stage of linear instability, nonlinear wave interaction leads to the reorganization of this vortex into a tripolar vortex. Further work will relate our solution with maximal entropy 3-D vortices.

The validity of the Oberbeck–Boussinesq (OB) approximation in Rayleigh–Bénard (RB) convection is studied using the Gray & Giorgini (Intl J. Heat Mass Transfer, vol. 19, 1976, pp. 545–551) criterion that requires that the residuals, i.e. the terms that distinguish the full governing equations from their OB approximations, are kept below a certain small threshold $\hat {\sigma }$. This gives constraints on the temperature and pressure variations of the fluid properties (density, absolute viscosity, specific heat at constant pressure $c_p$, thermal expansion coefficient and thermal conductivity) and on the magnitudes of the pressure work and viscous dissipation terms in the heat equation, which all can be formulated as bounds regarding the maximum temperature difference in the system, $\varDelta$, and the container height, $L$. Thus for any given fluid and $\hat {\sigma }$, one can calculate the OB-validity region (in terms of $\varDelta$ and $L$) and also the maximum achievable Rayleigh number ${{Ra}}_{max,\hat {\sigma }}$, and we did so for fluids water, air, helium and pressurized SF$_6$ at room temperature, and cryogenic helium, for $\hat {\sigma }=5\,\%$, $10\,\%$ and $20\,\%$. For the most popular fluids in high-${{Ra}}$ RB measurements, which are cryogenic helium and pressurized SF$_6$, we have identified the most critical residual, which is associated with the temperature dependence of $c_p$. Our direct numerical simulations (DNS) showed, however, that even when the values of $c_p$ can differ almost twice within the convection cell, this feature alone cannot explain a sudden and strong enhancement in the heat transport in the system, compared with its OB analogue.

Using as a starting point conservation of momentum, a multiphase mechanical energy balance equation is derived that accounts for multiple material phases and interfaces present within a moving control volume. This balance is applied to a control volume that is anchored to a three-phase contact line as it advances continuously over the surface of a rough and chemically homogeneous and inert solid. Using semi-quantitative models for the material behaviour occurring within the control volume, an order of magnitude analysis is performed to neglect insignificant terms, producing an equation for predicting contact-angle hysteresis from a knowledge of the interface dynamics occurring around the three-phase contact line. It is shown that the viscous energy dissipation that occurs during the ‘stick–slip’ motion of the three-phase contact line, being the cause of contact-angle hysteresis on rough surfaces, can be calculated from changes in intermediate equilibrium interface states. The balance is applied to the Wenzel, Cassie–Baxter and Fakir (super-hydrophobic) wetting states, showing for the Fakir case that significant dissipation occurs during both interface advance and recede, and relating these dissipations to interfacial area changes that occur around the ‘stick–slip’ events.

A wide range of environmental, energy, medical and biological processes rely on dispersive transport through complex media. Yet, because of the stagnant and opaque nature of the microscopic system, the role of disordered flow and structure in the dispersive transport of solutes remains poorly understood. Here, we use a circular porous microfluidic system to investigate the radial dispersion in porous media driven by non-Newtonian fluids with strong advection rate (or at high Péclet number) and low-to-moderate Reynolds numbers. We observe for the first time the presence of diffusion ‘blind zones’ in the microstructure for high solution injection velocities. More specifically, an in-depth analysis uncovers that the circumferential flow frame, coformed by obstacles and vortices especially the ‘twin-vortex’ with same rotation direction, is responsible for the diffusion ‘blind zones’ and transport heterogeneity. The vortices are induced by the coupling of microfluidics and porous structures, and correlated to inertial flow-induced instabilities. The trade-off between diffusion efficiency and quality/completeness with respect to the high Péclet number (or high inlet velocity) serves to enhance our comprehension of intricate fluid dynamics and affords a set of principles to aid a diverse range of practical implementations.

Cyber-Physical Systems (CPSs) combine cyber, physical and human activities through computing and network technologies, creating opportunities for benign and malign actions that affect organisations in both the physical and computational spheres. The US National Cyber Security Strategy (US White House, 2023) warns that this exposes crucial systems to disruption over a wide CPS attack surface. The UK National Cyber Security Centre Annual Review (UK National Cyber Security Centre, 2023) acknowledges that, although some organisations are evolving ‘a more holistic view of critical systems rather than purely physical assets’, this is not reflected in governance structures that still tend to treat cyber and physical security separately.

Biological microorganisms and artificial micro-swimmers often locomote in heterogeneous viscous environments consisting of networks of obstacles embedded into viscous fluid media. In this work, we use the squirmer model and present a numerical investigation of the effects of shape on swimming in a heterogeneous medium. Specifically, we analyse the microorganism's propulsion speed as well as its energetic cost and swimming efficiency. The analysis allows us to probe the general characteristics of swimming in a heterogeneous viscous environment in comparison with the case of a purely viscous fluid. We found that a spheroidal microorganism always propels faster, expends less energy and is more efficient than a spherical microorganism in either a homogeneous fluid or a heterogeneous medium. Moreover, we determined that above a critical eccentricity, a spheroidal microorganism in a heterogeneous medium can swim faster than a spherical microorganism in a homogeneous fluid. Based on an analysis of the forces acting on the squirmer, we offer an explanation for the decrease in the squirmer's speed observed in heterogeneous media compared with homogeneous fluids.

We investigate theoretically and numerically the impact of an elastic sphere on a rigid wall in a viscous fluid. Our focus is on the dynamics of the contact, employing the soft lubrication model in which the sphere is separated from the wall by a thin liquid film. In the limit of large sphere inertia, the sphere bounces and the dynamics is close to the Hertz theory. Remarkably, the film thickness separating the sphere from the wall exhibits non-trivial self-similar properties that vary during the spreading and retraction phases. Leveraging these self-similar properties, we establish the energy budget and predict the coefficient of restitution for the sphere. The general framework derived here opens many perspectives to study the lubrication film in impact problems.