In this paper, a simple and compact coplanar waveguide (CPW)-fed four coexisting inverted-L-shaped radiating elements based wideband (ILW) multi-input and multi-output (MIMO) antenna has been presented for wearable wireless applications. The 50 Ω CPW feed structure has been used to excite the four inverted-L-shaped radiators in a wide square slot of the proposed four-port wearable MIMO antenna. The four diagonal strips are extended from the corners of the wide square slot to form a square split ring structure in the center, which suppresses the coupling of electromagnetic waves among coexisting compact quad inverted-L-shaped radiators. The proposed ILW wearable MIMO antenna achieves a wide −10 dB simulated impedance bandwidth of 58.18% (3.9–7.1 GHz) and more than 30 dB isolation along with much reduced envelope correlation coefficient (<0.0002), high diversity gain (>9.9 dB), and specific absorption rate lower than 1 W/kg in the entire operational band. The simulated results are in good agreement with the measured ones. This ensures its utility for several wearable wireless applications in the C-band that comprises WLAN (5 and 5.2 GHz), Wi-MAX (5.5 GHz), and ISM band (5.8 GHz) applications.

In this paper, an antenna with 8 GHz (7–15 GHz) bandwidth is designed, simulated, fabricated, and measured. Commonly, for the effective use of electromagnetic sources, mode converters are used to transform donut-shaped patterns to directive patterns. This paper introduces a novel antenna called the pattern director antenna (PDA) that solves most problems associated with the azimuthally symmetric output modes of high-power microwave sources. The PDA accepts directly (without the need for mode conversion) an azimuthally symmetric generated mode of an electromagnetic source and converts it to radiate a directive pattern. For the proof of concept and validation of the design by simulations, the 3D printing technology [using polylactic acid (PLA)] is used to fabricate the PDA and measure its radiation patterns and return loss. The selected material is cheap and also environmentally friendly. The antenna was coated with aluminum to become a conductor. The gain is from 16.8 to 21.8 dB in the frequency range. The S11, main lobe deviation (MLD), and sidelobe level (SLL) are less than −15 dB, 2°, and −7 dB, in all frequency range, respectively. The simulation results are in good agreement with the measurement.

A wideband staircase pattern defected ground monopole antenna integrated with an artificial magnetic conductor (AMC) reflector has been proposed for C-band (4–8 GHz) and ITU band (8.01–8.5 GHz) applications. The integrated antenna consists of a staircase antenna at top, a 2 × 2 AMC reflector at the bottom and an air substrate as gap between them. The AMC offers 18.5% ± 90° reflection phase bandwidth from 6.10 to 7.32 GHz. The AMC layer has achieved mu-negative properties in the designated band. The AMC proffers polarization independent behavior in the respective frequency band depicting robustness in AMC reflection phase characteristics. The integrated antenna has offered a wide impedance bandwidth of 2.78 GHz (42.8% at 6.5 GHz and 34.1% at 8.15 GHz) due to the defected ground monopole. The integration of wideband AMC beneath the staircase monopole antenna alters the out of phase radiation to in-phase planer pattern which enhances the peak gain up to 9.7 dB. It reduces the 1-g averaged specific absorption rate to 0.223 and 0.324 W/kg at the two designated bands. The structure maintains almost similar bandwidth and gain due to artificial human body loading.

Fifth-generation technology is not fully deployed in the world wireless communication till date. Millimeter-wave (mm-wave) band needs to be used due to plenty of available bandwidth and for achieving the goals of 5G such as greater data rate, ultra-high-speed video broadcasting, low latency services, and many more. Wideband antenna is required for 5G applications to access the high speed, low latency Internet services, and ultra-high-definition video streaming. Various bandwidth enhancement techniques have been reported by the researchers for microstrip antennas operating at microwave bands. High link losses, small wavelength, limited coverage, and environmental losses are the major challenges of mm-wave band. To mitigate these issues and satisfy 5G standard, an antenna with wide bandwidth, high gain, narrow steerable beam, high isolation, low side lobe levels, and multiband characteristics is required. Modifications in conventional antenna design techniques are required to achieve broader bandwidth along with stable radiation characteristics, improved gain, and low side lobe levels at mm-wave frequencies. This paper presents the survey of various bandwidth enhancement techniques which has been used in the 5G antennas designed by researchers. Reviews of some wideband 5G antennas with their performance comparisons are also discussed.

This paper presents the design and analysis of a rectangular slot antenna for producing a directional radiation pattern over a wide bandwidth of 6–9 GHz. A basic wideband slot antenna is designed for the desired frequency band by microstrip offset feed technique. This antenna is then loaded with a superstrate and a reflector, both made of conducting sheets. Analogous to a three-element Yagi antenna, the superstrate enhances the boresight gain, while the reflector improves the front-to-back ratio (FBR) of the basic slot antenna. The antenna is optimized for superior wideband performance with boresight gain ≥5 dBi, peak cross-pol level ≤−10 dB and FBR ≥10 dB, over the −10 dB impedance band of 6–9 GHz, which in this paper is termed as the radiation bandwidth. Prototype measurement demonstrates a radiation bandwidth of 6.05–8.22 GHz (or 30.41%), which is in decent agreement with the simulation.

In this paper, a wideband circularly polarized corrugated G-shaped grounded ring slot antenna is presented. The proposed antenna structure is excited using a coplanar waveguide-fed monopole antenna, which is placed inside a corrugated G-shaped grounded ring. Due to the asymmetry in the ground plane, two orthogonal modes, having equal magnitude and out of phase by 90° are excited, resulting in circular polarization (CP). The generation of the CP in the proposed antenna structure is explained using thin dipole current element approximation. A prototype of the proposed antenna is fabricated and tested. The measured results exhibit a 3 dB axial ratio bandwidth of 37.6% (2.22–3.25 GHz), and reflection coefficient bandwidth (|S11| ≤ −10 dB) of 47.91% (2.13–3.47 GHz). Additionally, the design guidelines are also presented for G-shaped grounded ring slot antennas.

In this paper, a flexible single fed planar circular polarized slot antenna is proposed for Internet of Things wideband applications. The antenna flexibility is achieved by employing a mechanically bendable liquid crystalline polymer substrate. The overall antenna volume is 50 mm × 42 mm × 0.1 mm. The antenna design uses 45° rotated elliptical ground structure for generating circular polarized radiation over wideband spectrum. Two parametrical analyses targeting the slot ground are introduced in order to achieve the most efficient design. The final antenna design demonstrates a good matching in terms of reflection coefficient (<−10 dB), semi-omnidirectional radiation patterns, average gain of 4 dB, and <3 dB axial ratio over entire frequency band of operation. All antenna parameters are studied in both straight and bent antenna setup scenarios. Good agreement between simulation and measurement results of the antenna parameters are achieved. For both straight and bent antenna scenarios, the antenna receiving functionality in time domain is confirmed by retrieving highly correlated impulse responses.

This paper presents a high gain, wideband circularly polarized (CP) antenna. High gain of the antenna is achieved by employing a frequency selective surface (FSS) as a reflector. The antenna is a coplanar waveguide-fed structure with a modified L-shaped radiating patch. The unit element of the FSS is formed by connecting two modified dipoles at an angle of 90°. The antenna with reflector has a measured impedance bandwidth of 74.3% (2.2–4.8 GHz) and a 3-dB axial ratio bandwidth (ARBW) of 62% (2.2–4.18 GHz). The maximum boresight gain of the proposed antenna with reflector is 7.1 dB at 3.4 GHz. The radiation patterns of the antenna with the FSS are also measured and compared with simulated patterns. The various aspects of effect of FSS on CP antenna performance are also discussed.

A compact coplanar waveguide (CPW)-fed wideband metamaterial-inspired antenna is designed and developed in this paper. The proposed structure is an asymmetric structure in which three rectangular stubs are employed between signal patch and CPW ground plane. It is demonstrated that these stubs provides lumped parameters of conventional epsilon-negative transmission line (ENG-TL). As an advantage of these stubs proposed antenna operates on 1.67–2.76 GHz with −10 dB impedance bandwidth of 49.2%. The proposed antenna having small electrical size of 0.17λ0 × 0.35λ0 × 0.01λ0 at fo = 2.21 GHz. The simulated average gain and radiation efficiency of the proposed antenna is 1.61 dB and 96.33% respectively throughout the bandwidth. Properties such as smaller electrical size, simpler design, consistent radiation characteristics, and ease of fabrication are making this antenna suitable for GSM, WLAN/Wi-Fi, Bluetooth, and WiMAX applications.

Wideband dipole antennas are proposed using the multi-mode resonance concept. By symmetrically introducing one-pair or two-pair of stubs at the nulls of current distribution of the second odd-order mode, two radiation modes are excited in a single, center-fed dipole resonator. Using these stubs, the second odd-order mode gradually moves down to its first counterpart, resulting to achieve a wideband radiation with two resonances. Prototype antennas are then fabricated to experimentally validate the design approach. Compared with a reference dipole with a bandwidth of 17%, the proposed dipole's bandwidth can be effectively increased to 49.7%.

A dual wideband design of Sierpinski carpet fractal-shaped planar monopole antenna with a coplanar waveguide (CPW) feed is proposed in this letter. Wide impedance bandwidth of 22% at lower resonance from 4.88 to 6.08 GHz and 41.7% at higher one, which ranges from 9.5 to 14.5 GHz, is obtained. Measured realized antenna gain is around 5 dBi at the lower band centered around 5.5 GHz and are around 4.5 dBi at the higher band. A fabricated prototype is developed with good agreement between simulation and measurement.