This article presents the modeling and realization of a compact substrate integrated coaxial line (SICL) based butler matrix operating at 5 GHz for beam-forming applications. The proposed 4 × 4 butler matrix is developed using SICL-based hybrid coupler, crossover, and phase shifter. A compact 90∘ coupler comprising of center tapped unequal stubs is designed to enhance the size reduction as well as to extend the out of band rejection. Wideband SICL-based crossover operating from DC to 10 GHz is conceived for the proposed butler matrix using a plated through hole as transition. The SICL crossover features very high measured isolation of 65 dB owing to the reduction in coupling between the two signal paths within a lateral footprint of only 0.034 $\lambda_g^2$. A meandered SICL-based line is used in order to provide the necessary 45∘ and 0∘ phase shift to realize the butler matrix. The fully shielded and self-packaged compact 4 × 4 SICL-based butler matrix is fabricated and experimentally validated to operate at 5 GHz.

A low-profile slant ±45° polarized antenna for a 4G/5G base station with a dominant path wave propagation model (DPM) is reported in this paper. For dual-polarization and wide impedance bandwidth, the two dipole radiators are crisscrossed and a square metallic ring is integrated with the dipole arms and screwed with the four shorting vias. The antenna operates in Band 40/41/42/43 with strong isolation and low ECC (Envelop Correlation Coefficient). Fabricated antenna results show that the predicted wideband antenna has 13.38% bandwidth in 4G, which is Band 40/41, and 29.33% bandwidth in 5G sub-6 GHz Band 42/43. The antenna has a consistent radiation pattern, a 40 dB XPD (Cross Pol Discrimination), and a beam width of 69.5° ±1.5° in the entire frequency band. Three base station sites were explored to deploy the radiation pattern of a dual-polarized antenna in the 3D EM (Electromagnetic Analysis) tool. To evaluate signal quality, strength, radio network planning, and wave propagation analysis by analyzing antenna performance in real-time scenarios with 64 and 256 QAM (Quadrature Amplitude Modulation) techniques. For the proposed four-stream MIMO (Multiple-Input-Multiple-Output) antenna arrangement at deployed cell sites for 4G/5G base station applications, the maximum downlink and uplink data rates are 3.826/2.8 Mbps and 1044/800 Mbps respectively.

In this work, a compact size 4 ports multiple input multiple output (MIMO) slot antenna with the connected ground for Ultra-Wide Band (UWB) and X band applications is introduced and discussed. The single antenna is a cross-shaped slot antenna in the ground plane and a 50 Ω microstrip line with a small L-stub is used to feed the antenna on the other side. The suggested MIMO antenna has four identical elements arranged to be orthogonal to each other to enhance the MIMO system performance. The antenna elements are connected with a small strip to compose the proposed connected ground antennas. The suggested MIMO antenna has an overall size of 47 mm × 47 mm. The antenna has tested and simulated bandwidth with S11 < −10 dB extended from 4– 14 GHz and has isolation greater than 20 dB between ports without utilizing the decoupling elements and with good consistency between results. The MIMO antenna has peak gain and efficiency, envelope correlation coefficient, diversity gain, and channel capacity loss of 5.6 dBi and 80%, <5 × 10–3, 10 dB, and <0.4 bit/s/Hz, respectively which prove that our antenna can be suggested for the UWB MIMO applications.

In this paper, a compact four-element quasi-self-complementary (QSC) ultra-wideband (UWB) multiple-input multiple-output antenna with triple band-notched characteristics is proposed. Coplanar waveguides fed QSC structure is designed as radiation element to achieve wideband and small size. Besides, regular hexagonal split-ring resonators with single negative properties are designed and added on the back of the substrate to obtain high isolation in the whole operating band. Moreover, a double-fork-shaped slit is etched in each radiating element to generate three notched bands covering 3.63–4.24, 5.15–5.98, and 7.17–8 GHz. The experiment results indicate that the isolation of the proposed antenna is higher than 22 dB and the peak gain varies from 2.5 to 6.7 dB in the entire band of 3–18 GHz, which demonstrates that it is suitable for UWB applications.

A waveguide power divider based on ridge waveguide to microstrip line transition is presented in this paper. To improve the isolation performance, a probe insulator is inserted into the contact face from the center of the waveguide side wall, also two chip resistors are mounted on a planar substrate and connected with the probe to absorb the coupled energy. The impedance transformation is accomplished by ridge waveguide to microstrip line transition, which is hidden in the waveguide. This proposed power divider shows merits of waveguide power dividers and substrate-integrated waveguide power dividers simultaneously, i.e. planar output ports, compact size, and high isolation. For verification, a power divider operating at the Ka-band is simulated, fabricated, and measured. The obtained results show the return loss and isolation are better than 10 and 20 dB, respectively. The measured insertion loss is <1.5 dB, including the insertion loss of waveguide to microstrip line transitions at the output port in the range of 34.6–39 GHz.

This paper reports a bi-port, wideband, parasitic-fed, single/shared patch antenna with enhanced interport isolation for 2.4 GHz in-band full duplex (IBFD) applications. The employed parasitic feeding provides comparatively the wider impedance bandwidth and better gain for the presented antenna. The improved self-interference cancellation (SIC) levels across the required bandwidth are obtained through differentially-driven receive (Rx) mode operation. The differential Rx operation performs effective cancellation of in-band self-interference (SI) through signal inversion mechanism to achieve the additional isolation on the top of the intrinsic isolation of polarization diversity. The validation model for the presented antenna features ≥88 dB peak isolation between the dual-polarized Tx and Rx ports. In addition, the measured Tx–Rx isolation for prototype is >70 dB across the 10 dB return loss bandwidth of 100 MHz (2.42–2.52 GHz). The measured gain for each mode is better than 7.0 dBi. The novelty of this work is that compared to previously reported designs, the presented antenna offers wider impedance bandwidth and improved SIC levels in addition to superior gain performance. To the best of our knowledge, this is the first single/shared patch antenna which provides better than 70 dB interport isolation across the 10 dB return loss bandwidth of 100 MHz along with 7.0 dBi gain for Tx/Rx modes.

A suspended-stripline Gysel low-insertion-loss power combiner is presented in this paper. The multi-layer cavity structure reduces the circuit size and increases power density, composed of suspended strip lines and coaxial lines. The transmission-line theory is used to analyze this proposed power combiner, and the equivalent circuit model is developed to investigate the characteristics and design of the power combiner. The measured input return loss is greater than 20 dB from 7.15 to 9.35 GHz. The measured insertion loss is less than 0.36 dB, and the power-combining efficiency is greater than 92% from 7.39 to 9.19 GHz. The maximum power-combining efficiency is 98.8% at 8.1 GHz. Besides, the measured isolation is greater than 20 dB from 7 to 10 GHz. The power capacity is analyzed, and the cross-sectional power density is greater than 3.57 kW/cm2. The measured and simulated results show reasonable agreement with each other.

In this paper, a compact 4-port band-notched multi-input-multi-output (MIMO) antenna with asymmetric coplanar strip (ACS) feed is presented for ultra-wide band (UWB) applications. The MIMO antenna is comprised of four semi-elliptical radiators with ACS feed for UWB applications and it is printed on inexpensive FR4 substrate of size 48 × 52 mm2 with ɛr = 4.4 and 1.6 mm height. The impedance characteristics of the suggested MIMO antenna ranges from 2.7 to 11 GHz with a band-notched behavior from 3 to 4 GHz to reduce the interception with WiMAX applications, and the isolation level over the achieved band is more than 20 dB between any two adjacent elements. Moreover, the radiation pattern of the proposed UWB antenna is almost omnidirectional with an average realized gain of 3.5 dBi over the entire achieved frequency band. The proposed ACS-fed antenna is confirmed by fabricating and measuring it's impedance and radiation characteristics. Finally, good consistency between simulation and measured outcomes is obtained confirming the validity of the MIMO antenna for real-life UWB wireless systems.

A compact antenna module with a single band notch at wireless local area network (WLAN) (5.725–5.825 GHz) for ultra-wideband (UWB) multiple input multiple output (MIMO) applications is proposed. Proposed antenna which acquires size of 0.299 λ × 0.413 λ × 0.005 λ mm3 at 3.1 GHz consists of two symmetrical radiators placed side by side on global merchandise link (GML) 1000 substrate (εr = 3.2, tan δ = 0.004). Isolation between the antenna elements is >18 dB in the whole UWB band, which is achieved by introducing the vertical stub and H-slot between the monopole radiators in the ground plane. The simulated and measured results of the antenna system are in good agreement. The proposed antenna covers entire UWB with impedance bandwidth (|S11| < −15 dB) from 3.1 to 11 GHz except at WLAN notched band. The designed antenna module bears low envelope correlation coefficient and minimal multiplexing efficiency hence fulfilling criteria suitable for various wireless MIMO applications.

A miniaturized high-isolation quadplexer with wide upper-stopband based on open and short stub-loaded multimode-resonator is proposed in this paper. Based on the theory of multimode-resonator and stepped impedance resonator (SIR), the compact quadplexer is designed by using multimode-resonator and SIR. In order to further miniaturize the size of the circuit, the multimode resonator is employed as the common resonator to replace the common matching network of the quadplexer and the SIRs are curved. Equivalent topology circuit is given to analyze and design the quadplexer. Detailed analyses are given according to the equivalent circuits. The proposed compact quadplexer working at central frequencies of 1.8, 2.4, 2.8, and 3.5 GHz with over 40 dB isolation is finally simulated, fabricated, and measured. The measured results agree well with the simulated ones. The total size of the fabricated quadplexer is 0.36 λg × 0.42 λg.

A four-way suspended-stripline power divider is presented in this letter. The power dividing network is designed by using the suspended stripline, while the isolation network is designed by using the microstrip line. The vias are used to connect the power dividing network and the isolation network. The even- and odd-mode analysis method is applied to design the presented power divider. The simulated and measured results of the presented power divider show reasonable agreement with each other. The measured input return loss in the band is greater than 28 dB (7.92 to 9.53 GHz), while the measured insertion loss is less than 0.37 dB. The measured output return loss is greater than 20 dB from 7.82 to 9.86 GHz. Besides, the measured output isolation is greater than 20 dB.

A high-isolation diplexer based on a dual-mode substrate integrated waveguide (SIW) resonator is proposed in this paper. Based on the theory of the dual-mode resonator, the miniaturized diplexers are designed by using the SIW dual-mode resonators. The superior isolation of the diplexers is obtained because the two operating modes of the dual-mode SIW resonators are not directly coupled and there is no interference with each other. In order to further improve the isolation of the circuit, the number of the order of the diplexer is added. Equivalent circuits are given to analyze and design the dual-mode high-isolation diplexers. Detailed analyses are given according to the equivalent circuits. The dual-mode third-order and fourth-order diplexers are designed and fabricated. The measured results agree well with the simulated ones. The total sizes of the fabricated third-order and fourth-order diplexers are 1.78λg × 2.64λg and 1.79λg × 3.63λg, respectively.

A novel Gysel power divider with high power-handling capability based on half-mode substrate integrated waveguide (HMSIW) has been presented in this paper. A HMSIW ring is used and good input/output impedance matching is achieved based on HMSIW-microstrip taper transition. Two microstrip stubs are introduced in HMSIW ring to assemble two isolation resistors to improve the isolation between the output ports. The even- and odd-mode analysis method is used for the presented circuit. A prototype of the presented power divider is designed, fabricated, and measured. The measured results show a reasonable agreement with the simulated ones.

A novel small-size filtering power divider (PD) featured four-function integration is proposed. These four integrated functions are high-selectivity filtering, inherent DC block, high all-frequency isolation, and high-power applications. Using single-layer planar circuit technology, this proposed PD can be implemented easily. The measured results of a prototype show that it can operate at 2 GHz with a −10 dB matching bandwidth of 6% and all-frequency −15 dB isolation.

A compact quad band slot antenna with high isolation suitable for multiple-input–multiple-output (MIMO) applications is developed. The quad bands are achieved by introducing slots in a modified, size reduced circular patch antenna. The single-antenna element consists of a substrate sandwiched between a modified circular patch with F shape slot, a feeder line and a via running between the radiating patch and the feeder line. The proposed design resonates at the frequencies of 1.8 GHz (1.7–1.88 GHz), 3.6 GHz (3.50–3.76 GHz), 5.4 GHz (5.25–5.38 GHz), and 7.2 GHz (7.15–7.35 GHz) covering the GSM II, WIMAX, wireless local area network (WLAN), and C-band applications, respectively. The independent tuning of frequency bands is achieved by varying the length of the slots. Orthogonally placed two- and four-element MIMO antenna system are fabricated, tested, and the measurement results are presented. The separation between each element is reduced to 0.085λ while introducing slotted and pulsed stubs to improve isolation between elements. A detailed analysis, including mutual coupling, low correlation, diversity gain, and total array reflection coefficient had been reported. The two- and four-element MIMO antennas achieved correlation as low as 0.005, mutual coupling ≤−15 dB, and diversity gain nearly 10 dB.

A compact dual ports antenna with high isolation is proposed for handheld radio frequency identification (RFID) reader which is rarely reported in open literatures. Different with conventional handheld RFID reader antennas with single port, the proposed antenna transmits and receives signal separately. The proposed antenna operating with full duplex mode can enhance effectively sensitivity of reader, since the strong transmitting signal of reader with single port is usually highly coupled with weak receiving backscatter signal of tag. The antenna utilizes E-shaped aperture-coupled patch structure that occupies less volume and provides further space-saving efficiency. The height of the proposed antenna is only 6.8 mm and the volume of that is 80 mm × 80 mm × 6.8 mm, which is easy to integrate in handheld RFID readers. The antenna uses two E-shaped coupling apertures to excite two orthogonal modes for dual-polarized operation. High isolation of around −30 dB is obtained by proper arrangement of the length of coupling apertures and the position of the stubs. The measured results show −10 dB matching band and −25 dB isolation band from 2.32 to 2.6 GHz and from 2.3 to 2.55 GHz, respectively. The antenna is suitable for applications in handheld RFID readers.

This paper presents a multiple-input and multiple-output dual-element planar inverted-F antenna (PIFA) array for broadband operation covering the HIgh PERformance radio Local Area Network/2 (5.2 GHz/5.6 GHz), Wireless Local Area Network (5.2 GHz/5.8 GHz), and the Worldwide Interoperability for Microwave Access (5.5 GHz) bands for the compact wireless communication devices. The antenna dimension is reduced substantially with a miniature ground plane. The PIFA array provides a large bandwidth (670 MHz) and a high isolation between its ports less than −26 dB. The proposed antenna has been analyzed and designed with Ansoft HFSS v.11. Then a prototype was fabricated and tested for its performance in terms of bandwidth, S-parameters, and radiation pattern. A parametric study is made to analyze the effect of different PIFA parameters on the operating frequency and the S-parameters. The diversity performances are evaluated using computer simulation technology microwave studio (CSTMWS). The broadband performance and the high isolation are achieved in both simulation and measurement.

In this paper, a compact multiple-input multiple-output (MIMO) antenna system with high isolation is proposed for 2.4 GHz wireless local area network (WLAN) application. The system is composed of two aperture-coupled shorted patch antennas with a spacing of 4 mm (only 0.032λ). The antenna is fed with an H-shaped coupling slot, and the defected shorting wall is used for high isolation. The proposed MIMO system exhibits an isolation of better than −20 dB and a maximum isolation of −43 dB at the central frequency. The envelope correlation coefficient is less than 0.01. The simulated and measured results show that the proposed antenna is a good candidate for MIMO system with higher isolation and better diversity.