Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-25T05:47:54.119Z Has data issue: false hasContentIssue false

Extending model-mediation method to multi-degree-of-freedom teleoperation systems experiencing time delays in communication

Published online by Cambridge University Press:  10 December 2015

Emre Uzunoğlu
Affiliation:
Department of Mechanical Engineering, İzmir Institute of Technology, İzmir, Turkey. E-mail: [email protected]
Mehmet İsmet Can Dede*
Affiliation:
Department of Mechanical Engineering, İzmir Institute of Technology, İzmir, Turkey. E-mail: [email protected]
*
*Corresponding author. E-mail: [email protected].

Summary

In this study, a bilateral teleoperation control algorithm is developed in which the model-mediation method is integrated with an impedance controller. The model-mediation method is also extended to three-degrees-of-freedom teleoperation. The aim of this controller is to compensate for instability issues and excessive forcing applied to the slave environment stemming from time delays in communication. The proposed control method is experimentally tested with two haptic desktop devices. Test results indicate that stability and passivity of the bilateral teleoperation system is preserved under variable time delays in communication. It is also observed that safer interactions of the slave system with its environment can be achieved by utilizing an extended version of the model-mediation method with an impedance controller.

Type
Articles
Copyright
Copyright © Cambridge University Press 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Cui, J., Tosunoglu, S., Roberts, R., Moore, C. and Repperger, D. W., “A Review of Teleoperation System Control,” Proceedings Florida Conf. Recent Adv. Robot., Boca Raton, Florida (2003).Google Scholar
2. Dede, M. and Tosunoglu, S., “Fault-tolerant teleoperation systems design,” Ind. Robot J. 33 (5), 365372 (2006).Google Scholar
3. Lawrence, D. A., “Stability and transparency in bilateral teleoperation,” IEEE Trans. Robot. Automat. 9 (5), 624637 (1993).CrossRefGoogle Scholar
4. Anderson, R. J. and Spong, W., “Bilateral control of teleoperation with time delay,” IEEE Trans. Autom. Control 34 (5), 494501 (1989).CrossRefGoogle Scholar
5. Niemeyer, G. and Slotine, J., “Using Wave Variables for System Analysis & Robot Control,” Proceedings IEEE Int. Conf. Robot, Albuquerque, New Mexico, vol. 2, (1997) pp. 1619–1625.Google Scholar
6. Munir, S. and Book, W., “Control techniques and programming issues for time delayed internet based teleoperation,” ASME J. Dyn. Sys. Meas. Control 125 (2), 157277 (2003).CrossRefGoogle Scholar
7. Chopra, N., Spong, M. W., Hirche, S. and Buss, M., “Bilateral Teleoperation over the Internet: The Time Varying Delay Problem,” Proceedings Amer. Control Conf., Denver, Colorado, vol. 1, (2003) pp. 155–160.Google Scholar
8. Mitra, P. and Niemeyer, G., “Model-mediated telemanipulation,” Int. J. Robot. Res. 27, 253 (2008).Google Scholar
9. Willaert, B., Bohg, J., Van Brussel, H. and Niemeyer, G., “Towards Multi-DOF Model Mediated Teleoperation: Using Vision to Augment Feedback,” IEEE Int. Workshop on HAVE, Munich, Germany (2012).Google Scholar
10. Zeng, G. and Hemami, A., “An overview of robot force control,” Robotica 15, 473488 (1997).CrossRefGoogle Scholar
11. Kazerooni, H., Sheridan, T. B. and Houpt, P. K., “Robust compliant motion for manipulators-part I: The fundamental concepts of compliant motion; part II: Design method,” IEEE J. Robot. Automat. 2 (2), 83105 (1986).Google Scholar
12. Hogan, N., “Impedance control: An approach to manipulation-Part I: Theory; Part II: Implementation; Part III: Applications,” ASME J. Dyn. Sys. Meas. Control 107 (1), 124 (1985).Google Scholar
13. Mitra, P. and Niemeyer, G., “Dynamic Proxy Objects in Haptic Simulations,” IEEE Conf. Robot Autom. Mechatronics, Singapore (2004) pp. 1054–1059.Google Scholar
14. Dragoljub, S., “Contact Stability Issues in Position Based Impedance Control: Theory and Experiments,” Proceedings IEEE Conf. on Robot. and Automat., Minneapolis, Minnesota, vol. 2, (1996) pp. 1675–1680.Google Scholar
15. Lawrence, D. A., “Impedance Control Stability Properties in Common Implementations,” Proceedings. IEEE Conf. on Robot Autom., Philadelphia, Pennsylvania, vol. 2, (1988) pp. 1185–1190.Google Scholar
16. Kiyoshi, O., Miyazaki, M. and Fujita, M., “Hybrid Control of Force and Position without Force Sensor,” Proc. IEEE Conf. on Indus. Elec. Control, Instrumen. and Automat., San Diego, California, vol. 2, (1992) pp. 670–675.Google Scholar
17. Adams, R. J. and Hannaford, B., “Stable haptic interaction with virtual environments,” IEEE Trans. Robot. Automat. 15, 3465–473 (1999).CrossRefGoogle Scholar
18. Cho, H. C. and Park, J. H., “Stable bilateral teleoperation under a time delay using a robust impedance control,” Mechatronics 15 (5), 611625 (2005).Google Scholar
19. Willaert, B., Brussel, H. V. and Niemeyer, G., “Stability of model-mediated teleoperation: Discussion and experiments,” Haptics: Perception, Devices, Mobility, Commun. 7282, 625636 (2012)Google Scholar
20. Llewellyn, F. B., “Some Fundamental Properties of Transmission Systems,” Proceedings IRE, 40, 271283 (1952).Google Scholar

Uzunoğlu and Dede supplementary material

Uzunoğlu and Dede supplementary material 1

Download Uzunoğlu and Dede supplementary material(Video)
Video 1.2 MB

Uzunoğlu and Dede supplementary material

Uzunoğlu and Dede supplementary material 2

Download Uzunoğlu and Dede supplementary material(Video)
Video 7.7 MB

Uzunoğlu and Dede supplementary material

Uzunoğlu and Dede supplementary material 3

Download Uzunoğlu and Dede supplementary material(Video)
Video 2.8 MB

Uzunoğlu and Dede supplementary material

Uzunoğlu and Dede supplementary material 4

Download Uzunoğlu and Dede supplementary material(Video)
Video 2.4 MB