While solar photovoltaics are projected to grow, major financial barriers exist that impede installation. Soft costs (human-driven costs) can account for over half of total project costs and are often simplified in typical models. We use the National Renewable Energy Laboratory's “Cost of Renewable Energy Spreadsheet Tool” to quantify uncertainty of three soft cost inputs and their influence on the output cost of energy using variance-based sensitivity indices. We then suggest how the development process and model can be redesigned to represent the complexities of this socio-technical system.

Product-service systems are circular business models that can potentially extend product lifetimes and reduce resource consumption. However, consumer product care is crucial in these business models. We explore consumer product care of newly bought, second-hand, and accessed bicycles and washing machines through an online survey (n = 212). Our analysis shows lower consumer product care of accessed products compared to ownership. Three strategies could address this; design for care, design to reduce the need for care, contractual conditions to stimulate care or penalise the lack thereof.

Introducing irrigation to smallholder farms in Sub-Saharan Africa (SSA) can increase food security, improve nutrition, and reduce poverty. To explore the possibility of using drip irrigation on smallholder farms in SSA, we introduce a feasibility study that views the design space from both a user-centered lens, explaining how drip might be successful in the future, and from an engineering lens. With a first-order model, we compare estimated capital costs of drip and sprinkler systems for various farm profiles and show that drip has the potential to be a viable technology for many farms in SSA.

Linear production is related to resource scarcity and negative environmental impacts. Circular Economy (CE) emerged for society transition towards sustainability, based on regenerative systems and multiple life cycle products. Product Life cycle Management (PLM) supports the whole life cycle with the aid of Information and Communication Technology (ICT). A literature review analyzed the role of ICT enabling CE based on PLM, identifying challenges and opportunities, active and passive PLM, system perspective, stakeholder's role, and sustainability. Concluding that ICT enables the CE transition.

Brought by the need for competent approaches to assess the financial cost and environmental impact towards service design-for-cost-and-environment, this paper investigates on the following service representation approaches: Service Blueprinting, Process Chain Network, Business Process Model & Notation, and Customer Journey Mapping. An ontological analysis further compares their similarities and differences. Lastly, a table summarizes the findings, were further insights could be drawn to help service companies be more aware of both their spending and ecological responsibility.

This research proposes a group model building workshop method that uses causal loop diagrams to foster capabilities for sustainable product development based on feedback and observations from several cases. The method's potential to enhance sustainability system thinking skills and to identify relationships between sustainability criteria and traditionally identified requirements is evaluated. The method can trigger discussion, visualize complexity and dependencies of sustainable design problems. Other application areas are e.g., sustainability training for practicing engineers and students.

This paper reports an embedded single case study from a globally operating manufacturer for digital healthcare products. Based on nine semi-structured interviews, document analysis, and a diary study among employees, we were able to gain insights on the daily business routines and interactions of the design team, the UX research team, and the product management department. The results revealed several unexpected insights that indicate a practical mismatch between user-centred design processes learned from the textbook and design practice in the healthcare sector that warrant further research.

In a program we developed called “Let's keep wiping to draw pictures!”, projected graphic images change according to rehabilitation movements for upper limbs, and the levels of exercise amount and quality of movement achieved by patients are reflected in the outcome of the artwork as feedback. At a rehabilitation hospital, inpatients who used the program to perform rehabilitation exercises showed higher levels of satisfaction and expectation in the exercises, and performed simple and repetitive movements more willingly. The program can expect to maintain motivation towards rehabilitation.

The model of PGE describes the emergence of new systems based on reference by the activities carryover, embodiment and principle variation - qualitatively different manifestations of a transfer process. We investigate indicators which constitute these different manifestations measurably for different types of systems. We propose generalized variation operators to describe system development with respect to different product elements and system types. We use case studies from automotive, production systems and simulation models.

Platform design has been firmly established in the automotive industry as a strategy to provide wider product variety while maintaining cost effective production. But this strategy can struggle to keep up with the pace and nature of emerging technologies. This paper reviews the existing approaches to modelling product platforms, and showcases the challenges at OEMs introducing new technological innovations in their platforms. A gap is identified in the methods to assess the ability of existing platforms to integrate new technologies whenever they become available.

Systems engineering (SE) is a general methodological approach that includes all relevant activities to design, develop and verify a system. This work was based on the need to enhance the integration of the customer needs into the design phases of SE. A joint methodology was proposed integrating the SE approach with the Design Thinking (DT). An analysis was conducted as part of a case study proposed by IBM Corporation for the development of a security system for a building. The results confirm that the insertion of the DT in the SE has a significant impact on the generation of concept solutions.

There are various strategies to control complexity and variety growth in ETO businesses. Such portfolio rationalization initiatives sometimes stall. This paper elaborates on the challenges that cause this. Challenges described in literature and challenges seen in five different industry cases are consolidated. The challenges are combined into groups and presented in the ADKAR change management model. The authors intend this list to be used for guidance In industry and expect the collection to be extended with future industry cases and challenges.

Presented is an approach to support margin allocation and management via a graph-theoretical network of assumptions. In contrast to the document-centric approach, the network captures assumptions dependencies, and enables an algorithmic process supporting margin allocation and management. Ultimately, this methodology is intended to assist decision-makers in managing assumptions and examining their impact on an architecture. Explicitly linking margins to assumptions allows to support mitigating their risk of invalidity. The approach is demonstrated with a conceptual aircraft design example.

As the complexity of the systems increases, so does the complexity of designing a suitable engineering IT architecture. Challenges reach from the definition of required and consistent functionalities and interfaces to the evaluation, which combination of IT tools fulfils the required functionality, usability and interoperability in the best way. Thus, we provide a procedure, methodology and modelling support for the definition of functional and logical engineering IT architectures and their holistic evaluation. The approach is part of an overall procedure and demonstrated in an example.

Interactive computer-supported information visualisations are being increasingly used in design. However, while there are frameworks that discuss how traditional representations, such as sketches, CAD models and static diagrams support design tasks, no such mapping exists for interactive visualisations of product-related information. As novel contributions, this paper reviews the design literature for the use of information visualisations. Moreover, using systems theory and Gestalt principles, insights on the applicability of such information visualisations for various design tasks are given.

Modular product structuring has been proven an effective way to satisfy a high sales variety with low internal product and process complexity but is usually carried out on existing structures. To support the modular new product development, this contribution shows the initial structuring of integrated product and assembly structures based on a variance-oriented product structure. With help of a perspective-based modularization approach, consolidating the product life phases of procurement, assembly and sales, modular product and process structures are developed within an industry case study.

A new design methodology for long life and large size (Ll-Ls) products called Design for Installation (DfI) is proposed. Ll-Ls products are usually made up of large parts that need to be assembled on field. The proposed methodology, based on adapted Design Structure Matrix (DSM) and Design for Manufacturing and Assembly (DfMA) methods, enables to optimize the design of a Ll-Ls product in order to reduce time and cost of the installation process. The new methodology works with a conceptual design of the product and the weight and size restrictions given by logistic factors as inputs.

Alternative ways to divide the product into modules, partitioning types, have been identified. The research material consists of the modularisation exercise at the university. Students modularised LEGO wheel loaders for product configuration. We began to see certain basic principles for partitioning the product into modules. From these, we compiled a collection of partitioning types. Similarities between the identified partitioning types and the literature exists. Future research is concerned with whether identified partitioning types would also support modularisation in industrial projects.

Increased system robustness is one of the promises of modularity. However, research on the topic has provided conflicting findings. By generating more than 2000 system architectures, this paper shows that the relation between modularity and robustness is multifaceted: Modularity decreases topological robustness, increases robustness to change propagation, and provides economic benefits. Results here confirm the importance of modularity, enable reconciliation of opposing findings from prior research, and guides researchers and practitioners in the selection of appropriate robustness measures.

Design principles from the field of design engineering require that a product be designed as unambiguous, safe and simple as possible. Simplicity results on the one hand from an objective product-relevant side, on the other hand from the experience and knowledge of the user. A product that is perceived as simple by one person may seem complicated to another. From this, the questions arise, with which attributes simplicity can be described and how these are to be captured. In this paper, an evaluation system for the subjective attributes of simplicity is created using the fuzzy sets approach.