X-ray reference powder patterns and crystal structures have been determined for a series of titanium- and cobalt-containing layered alkaline-earth compounds with nominal formula (Bax Sr1−x )Ti6Co6O19 (x = 0.2, 0.4, 0.6, 0.8). Structural isomorphism of the title compounds with the hexagonal ferrite BaFe12O19 and magnetoplumbite (PbFe12O19), was confirmed. The (Bax Sr1−x )Ti6Co6O19 series crystallize in the space group of P63 /mmc (No. 194) and Z = 2. The lattice parameters range from a = 5.90729(6) Å, c = 23.2378(3) Å, and V = 702.27(2) Å3 for x = 0.2 to a = 5.914 93(9), c = 23.3391(5) Å, and V = 707.15(2) Å3 with x = 0.8. The structure consists of alternating spinel S-block and R-blocks. The tetrahedral sites within the spinel S-blocks are occupied with only Co2+, while Ti4+ is mainly located in the octahedral sites of the spinel S-blocks and in the face-sharing octahedral site of the R-blocks. A bipyramidal mixed Co/Ti site was confirmed in the R-block of the structure. Powder X-ray diffraction patterns of this series of compounds have been submitted to be included in the Powder Diffraction File.

Apixaban (Eliquis®) is a novel oral pyrazole-based direct FXa inhibitor. The title compound is an intermediate in the synthesis of the anticoagulant, Apixaban. X-ray powder diffraction data for the title compound, are reported [a = 9.511(5) Å, b = 18.539(2) Å, c = 5.645(3) Å, α = 90°, β = 101.813(1)°, γ = 90°, unit-cell volume V = 974.28 Å3, Z = 2, ρcal = 1.336 g cm−3, and space group P2]. All measured lines were indexed and are consistent with the P2 space group. No detectable impurities were observed.

The syntheses and crystal structures and magnetic properties of novel RIn3−xTx (R = Gd，Pr；T = Fe，Co，Mn；x = 0–0.3) intermetallic compounds in rare earth-In-3d transition metal ternary system have been systematically investigated. It reveals that RIn3−xTx crystallizes in cubic AuCu3 type structure with a space group of Pm$\bar 3$m and Z = 1. The 1a and 3c crystal positions are occupied by R and In atoms, respectively. The 3d transition metals substitute partly for In and prefer to occupy the 3c site. The lattice parameters and unit cell volumes decrease with increasing the content of 3d transition metal in RIn3−xTx intermetallic compounds. The magnetic properties of RIn3−xTx are sensitive to T content. With increasing T content, GdIn3−xTx alloys show the paramagnetic, mixture of ferromagnetic and paramagnetic and ferromagnetic behavior. T doping into RIn3 induces the presence of ferromagnetic phase in GdIn3−xTx, which is totally different from those of the pure binary RIn3.

Structure and optical properties have been successfully determined for a series of niobium- and tantalum-containing layered alkaline-earth silicate compounds, Ba3(Nb6−xTax)Si4O26 (x = 0.6, 1.8, 3.0, 4.2, 5.4). The structure of this solid solution was found to be hexagonal P-62m (No. 189), with Z = 1. With x increases from 0.6 to 5.4, the lattice parameter a increases from 8.98804(8) to 9.00565(9) Å and c decreases from 7.83721(10) to 7.75212(12) Å. As a result, the volume decreases from 548.304(11) to 544.479(14) Å3. The (Nb/Ta)O6 distorted octahedra form continuous chains along the c-axis. These (Nb/Ta)O6 chains are in turn linked with the Si2O7 groups to form distorted pentagonal channels in which Ba ions were found. These Ba2+ ions have full occupancy and a 13-fold coordination environment with neighboring oxygen sites. Another salient feature of the structure is the linear Si–O–Si chains. When x in Ba3(Nb6−xTax)Si4O26 increases, the bond valence sum (BVS) values of the Ba sites increase slightly (2.09–2.20), indicating the size of the cage becoming progressively smaller (over-bonding). While SiO cages are also slightly smaller than ideal (BVS range from 4.16 to 4.19), the (Nb/Ta)O6 octahedral cages are slightly larger than ideal (BVS range from 4.87 to 4.90), giving rise to an under-bonding situation. The bandgaps of the solid solution members were measured between 3.39 and 3.59 eV, and the x = 3.0 member was modeled by density functional theory techniques to be 3.07 eV. The bandgaps of these materials indicate that they are potential candidates for ultraviolet photocatalyst.

A new software application has been developed to provide a convenient method for the submission of diffraction data directly to the International Centre for Diffraction Data, for inclusion in the Powder Diffraction File (PDF)™. The application, titled Genie, acts as a portal for the merging of data from separate sources allowing the user to quickly and easily submit their data for the PDF. Using Java Web Start technology Genie can be run using all common computer platforms. Genie is flexible and can be used to read a variety of common file formats. Furthermore, Genie can also be used for submission of New Diffraction Data for publication in the Powder Diffraction Journal.

The present work focuses on the deformation and recovery mechanisms of aged monoclinic U–Nb alloy under tension and load–unload cycle testing using in situ X-ray diffraction (XRD). The U–6.2wt% Nb (U–6.2Nb) alloy was prepared and aged at 200 °C, and then underwent tensile testing followed by the in situ XRD. The experimental results indicate that the change of diffraction peaks can serve to accurately characterize the macroscopic deformation and recovery. Compared with the as-quenched alloy, the aged U–6.2Nb alloy displays different behavior during deformation and subsequent recovery. Phase transformation competes with twin rearrangement to dominate the deformation and recovery between elastic stage and slip stage of the alloy. The lattice plane relationship between α″ and γ° during phase transformation has also been given.

The α-aminonitrile, 2-morpholino-2-(3,4,5-trimethoxyphenyl)acetonitrile (C15H20N2O4), was prepared through a silica sulfuric acid-catalyzed Strecker reaction between 3,4,5-trimethoxybenzaldehyde, morpholine, and two different cyanide sources. Molecular characterization was performed by Fourier transform infrared spectroscopy, gas chromatography–mass spectrometry, (1H, 13C – mono and bidimensional) nuclear magnetic resonance; crystallographic characterization was completed by X-ray powder diffraction of polycrystalline samples. The title compounds crystallized in a monoclinic system and unit-cell parameters are reported [a = 13.904(2), b = 5.1696(6), c = 21.628(3) Å, β = 104.31(1)°, unit-cell volume V = 1506.3(3) Å3, Z = 4]. All measured lines were indexed with the P21/a (No. 14) space group.

The U.S. National Committee for Crystallography (USNC/Cr) of the National Academies of Sciences, Engineering, and Medicine provided an online workshop series for researchers on the use, development, and maintenance of crystallographic and structural databases in the Spring of 2022. Encompassing macromolecular, small molecule, and powder diffraction information, the series included 11 modules each meeting for 1 or 2 days. Graduate students, postdoctoral fellows, faculty members and researchers in any of the crystallographic, diffraction, and imaging sciences affiliated with the International Union of Crystallography (IUCr) were encouraged to register and participate in the training sessions that interest them.

The (Ag,Pd)22Se6 phase was synthesized from individual elements by silica glass tube technique and structurally characterized from powder X-ray diffraction data. The (Ag,Pd)22Se6 phase crystallizes in Fm$\overline3$m symmetry, unit-cell parameters: a = 12.3169(2) Å, V = 1862.55(5) Å3, Z = 4, and Dc = 10.01 g/cm3. The crystal structure of the (Ag,Pd)22Se6 phase represents a stuffed 3a.3a.3a superstructure of the Pd structure (fcc), where only 4 from 108 available octahedral holes are occupied. Its crystal structure is related to the Cr23C6 structure type.

X-ray powder diffraction data, unit-cell parameters, and space group for 17- hydroxy-16-methyl-9,11-epoxypregna-1,4,6-triene-3,20-dione, C22H26O4, are reported [ a = 18.435(1) Å, b = 12.269(3) Å, c = 8.251(5) Å, α = 90°, β = 90°, γ = 90°, unit-cell volume V = 1866.43 Å3, Z = 4, ρcal = 1.261 g cm−3 and space group P212121]. All measured lines were indexed and are consistent with the P212121 space group. No detectable impurities were observed.

3-[1-[4-(2-Methylpropyl)phenyl]ethyl]-6-(4-fluorophenyl)-1,2,4-triazolo[3,4-b]-1,3,4-thiadiazole (C21H21FN4S) has been synthesized as a member of a series of triazolothiadiazoles having NSAIDs moieties with cytotoxic activity. The crystal structure of this new compound has been solved and refined using conventional laboratory X-ray powder diffraction data and optimized using density functional techniques. The final structure solution was achieved by Rietveld refinement using soft restraints on all non-H atom bond lengths and angles. This compound crystallizes in $P\bar{1}\;$ space group, with the unit cell parameters a = 5.5880(4) Å, b = 9.3074(7) Å, c = 19.497(4) Å, α = 99.311(10)°, β = 91.925(9)°, γ = 98.199(6)°, and V = 988.8(2) Å3. To complement and verify the structure solution of the compound, the density functional theory (DFT) calculations were performed by using the local density approximation and the generalized gradient approximation for exchange-correlation energy. In order to see the effect of the van der Waals interactions on the electronic structure, the relevant structure was also optimized with B3LYP-D2, PBE-D2, and optB88-vdW functionals. The refined crystal structure was confirmed by the DFT calculations. The best agreement with the experimental structure was achieved by optB88-vdW functional.

Capecitabine (Xeloda) is a chemotherapy drug used to treat breast, gastric, and colorectal cancers. Commercial capecitabine crystallizes in the orthorhombic space group P212121 (#19) with a = 5.20587(3), b = 9.52324(4), c = 34.79574(21) Å, V = 1725.062(12) Å3, and Z = 4. A reduced cell search in the Cambridge Structural Database (Groom C. R., Bruno, I. J., Lightfoot, M. P., and Ward, S. C. (2016) Crystallogr. Sect. B: Struct. Sci., Cryst. Eng. Mater.72, 171–179) yielded three previous structure determinations (Rohlicek, J., Husak, M., Gavenda, A., Jegorov, A., Kratochvil, B., and Fitch, A. (2016). Acta Cryst. Sect. E: Crystallgr. Commun.72, 879–880, BOVDUM; Malińska, M., Krzeczyński, P., Czerniec-Michalik, E., Trzcińska, K., Cmoch, P., Kutner, A., and Woźniak, K. (2014). J. Pharm. Sci.103, 587–593, BOVDUM01 and BOVDUM02), using synchrotron powder data and later single crystal data at two temperatures. In this work, the sample was ordered from United States Pharmacopeial Convention (lot # G0J205), and analyzed as-received. The room temperature (295 K) crystal structure was refined using synchrotron (λ = 0.413914 Å) powder diffraction data, density functional theory (DFT), and Rietveld refinement techniques. Hydrogen positions were included as part of the structure, and were re-calculated during the refinement. The diffraction data were collected on a beamline 11-BM at the Advanced Photon Source, Argonne National Laboratory and the powder X-ray diffraction pattern of the compound is provided. The agreement of the Rietveld-refined and DFT-optimized structures is poorest in the pentyl side chain, consistent with the disorder observed previously.

The third edition of the To.Sca.Lake Summer School, co-sponsored by ICDD, was organized on the Como Lake shore in Northern Italy, and has seen the participation of more than 50 attendees from four different continents. The main topic was Total Scattering Analysis in the real and reciprocal spaces (by the Pair Distribution Function and the Debye Scattering Equation approaches, respectively). with additional contributions on Small Angle X-ray Scattering and Light Scattering methods, the latter proposed in the static and dynamic modes.

Ni nanowire arrays were prepared by electroplating using anodic aluminum oxide templates, and a magnetic field was applied during the electroplating process. The effects of an applied magnetic field on the texture and magnetic properties of the Ni nanowire arrays were studied. The results show that the (110) texture is formed in the nanowires prepared in different magnetic fields. However, the applied magnetic field during electroplating can affect the texture degree, and there exists a suitable magnetic field for small diffusion degree of the (110) texture. On the basis of texture characterization, the effects of applied magnetic field on the magnetic properties of Ni nanowire arrays are discussed.

The monoclinic-to-tetragonal phase transition (~70 °C) in vanadium dioxide (VO2) strongly impacts the infrared properties, which enables its use in applications such as smart window devices. Synthesis of VO2 can be challenging due to the variability of vanadium oxide phases that may be formed. We have employed high-temperature X-ray diffraction (HTXRD) to monitor the reaction process of vanadium oxide precursor powders to form the desired tetragonal VO2 phase. Single-phase tetragonal VO2 was formed within 30 min at 420 °C in flowing N2 gas (~50 ppm O2). The monoclinic-to-tetragonal phase transformation was observed via HTXRD at ~70 °C with the typical ~10 °C hysteresis (i.e. approached from above or below the transition).

A new organic–inorganic hybrid lithium m-phenylenediamine sulfate (LPS), Li2(C6H10N2)(SO4)2, was synthesized under aqueous solution conditions. The X-ray powder diffraction study determined that the title compound crystallized in a monoclinic system at 300 K, with unit-cell parameters a = 7.8689(6) Å, b = 6.6353(5) Å, c = 11.8322(10) Å, β = 109.385(3) °, V = 582.77(8) Å3. Indexing of the diffraction patterns collected from 100 to 600 K reveals that LPS has no structural phase transition within the measured temperature range, and the volume expansion coefficient is approximately 2.79 × 10−5 K−1. The crystal structure was solved based on the single-crystal diffraction data with space group P21/m. Lithium and SO42− are found to form quasi-two-dimensional anti-fluorite [LiSO4] layers stacking along the c-axis, with m-phenylenediamine molecules inserted in the anti-fluorite layers and forming hydrogen bonds to the SO42−. This explains a moderate anisotropic expansion in LPS.

Rapid, on-line measurement of feedstock mineralogy is a highly attractive technology for the mineral processing industry. A Monte Carlo particle transport-based modelling technique has been developed to help design and predict the measurement performance of on-line energy-dispersive X-ray diffraction (EDXRD) analysers. The accuracy of the technique was evaluated by performing quantitative phase analysis on a suite of fifteen synthetic potash ore samples. The diffraction profile of each sample was measured with a laboratory EDXRD analyser and an equivalent profile was simulated in the Monte Carlo package. Linear regression analysis was used to determine the mineral abundances in each sample from both the measured and modelled profiles. Comparison of the results showed that the diffraction profiles and measurement accuracies obtained by simulation agree very well with the measured data.

The crystal structure of imepitoin has been solved and refined using synchrotron X-ray powder diffraction data, and optimized using density functional techniques. Imepitoin crystallizes in space group Pbca (#61) with a = 12.35541(2), b = 28.43308(8), c = 7.340917(7) Å, V = 2578.882(7) Å3, and Z = 8. The roughly planar molecules stack along the c-axis. There are no traditional hydrogen bonds in the structure, but several intramolecular and intermolecular C–H⋯O, C–H⋯N, and C–H⋯Cl hydrogen bonds contribute to the crystal energy. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®).