In this paper, we investigate the kinetic stability of classical, collisional plasma – that is, plasma in which the mean-free-path $\lambda$ of constituent particles is short compared with the length scale $L$ over which fields and bulk motions in the plasma vary macroscopically, and the collision time is short compared with the evolution time. Fluid equations are typically used to describe such plasmas, since their distribution functions are close to being Maxwellian. The small deviations from the Maxwellian distribution are calculated via the Chapman–Enskog (CE) expansion in $\lambda /L \ll 1$, and determine macroscopic momentum and heat fluxes in the plasma. Such a calculation is only valid if the underlying CE distribution function is stable at collisionless length scales and/or time scales. We find that at sufficiently high plasma $\beta$, the CE distribution function can be subject to numerous microinstabilities across a wide range of scales. For a particular form of the CE distribution function arising in strongly magnetised plasma (viz. plasma in which the Larmor periods of particles are much smaller than collision times), we provide a detailed analytic characterisation of all significant microinstabilities, including peak growth rates and their associated wavenumbers. Of specific note is the discovery of several new microinstabilities, including one at sub-electron-Larmor scales (the ‘whisper instability’) whose growth rate in certain parameter regimes is large compared with other instabilities. Our approach enables us to construct the kinetic stability maps of classical, two-species collisional plasma in terms of $\lambda$, the electron inertial scale $d_e$ and the plasma $\beta$. This work is of general consequence in emphasising the fact that high-$\beta$ collisional plasmas can be kinetically unstable; for strongly magnetised CE plasmas, the condition for instability is $\beta \gtrsim L/\lambda$. In this situation, the determination of transport coefficients via the standard CE approach is not valid.

Laser-driven ion acceleration is well established using solid targets mainly in the target normal sheath acceleration regime. To follow the increasing repetition rate available on high-intensity lasers, the use of high-density gas targets has been explored in the past decade. When interacting with targets reaching densities close to the critical one, the laser pulse can trigger different acceleration mechanisms such as Collisionless Shock Acceleration (CSA) or hole boring. Particle-in-cell simulations using ideal target profiles show that CSA can accelerate a collimated, narrow energy spread and few hundreds of megaelectronvolts ion beam on the laser axis. Nevertheless, in real experiments, the laser will not only interact with an overcritical, thin plasma slab with sharp density gradients, but also with lower density regions surrounding the core of the gas jet, extending to several hundreds of micrometres. The interaction of the laser with these lower density wings will lead to nonlinear effects that will reduce the available energy to drive the shock in the high-density region of the target. Optically tailoring this target could mitigate that issue. Recent experiments conducted on different laser facilities aimed at testing several tailoring configurations. We first tested a scheme with a copropagating picosecond prepulse to create a lower density plasma channel to facilitate the propagation of the main pulse, while the second one was a transverse tailoring driven by nanosecond laser pulses to generate blast waves and form a high-density plasma slab. The main results will be presented here and the methods compared.

The centrifugal mirror confinement scheme incorporates supersonic rotation of a plasma into a magnetic mirror device. This concept has been shown experimentally to drastically decrease parallel losses and increase plasma stability as compared with prior axisymmetric mirrors. MCTrans++ is a dimensionless (0-D) scoping tool which rapidly models experimental operating points in the Centrifugal Mirror Fusion Experiment (CMFX) at the University of Maryland. In the low-collisionality regime, parallel losses can be modelled analytically. A confining potential is set up that is partially ambipolar and partially centrifugal. Due to the stabilizing effects of flow shear, the perpendicular losses can be modelled as classical. Radiation losses such as bremsstrahlung and cyclotron emission are taken into account. A neutrals model is included, and, in some circumstances, charge-exchange losses are found to exceed all other loss mechanisms. We use the SUNDIALS ARKODE library to solve the underlying equations of this model; the resulting software is suitable for scanning large parameter spaces, and can also be used to model time-dependent phenomena such as a capacitive discharge. MCTrans++ has been used to verify results from prior centrifugal mirrors, create an experimental plan for CMFX and find configurations for future reactor-scale fusion devices.

Isothermal fluid turbulence simulations have been performed in the edge and scrape-off layer (SOL) of an analytic stellarator configuration with an island divertor, thereby providing numerical insight into edge turbulence in regions around islands in a stellarator. The steady-state transport follows the a curvature drive that is inverse to the major radius ($1/R$) toward the outboard side, but large fluctuations are present throughout the island divertor region, with the average wavelength of similar size to the island width. The system exhibits a prominent $m=2$, $n=5$ mode, where m is the poloidal mode number and n is the toroidal mode number, although other modes are present. The amplitude and radial extent of the density fluctuations are similar throughout the edge and SOL, but can decrease near island O-points. The fluctuations exhibit a predominantly positive skewness on the outboard midplane, indicating blob-like perturbations for the transport into the outer SOL. It is determined that a point on the separatrix is generally more correlated with regions outside of the SOL than a nearby reference point which does not lie on the separatrix.

Some stellarators tend to benefit from favourable average magnetic curvature for trapped particles when the plasma pressure is sufficiently high. This so-called maximum-$J$ property has several positive implications, such as good fast-particle confinement, magnetohydrodynamic stability and suppression of certain trapped-particle instabilities. This property cannot be attained in quasisymmetric stellarators, in which deeply trapped particles experience average bad curvature and therefore precess in the diamagnetic direction close to the magnetic axis. However, quasi-isodynamic stellarators offer greater flexibility and allow the average curvature to be favourable and the precession to be reversed. We find that it is possible to design such stellarators so that the maximum-$J$ condition is satisfied for the great majority of all particles, even when the plasma pressure vanishes. The qualitative properties of such a stellarator field can be derived analytically by examining the most deeply and the most shallowly trapped particles, although some small fraction of the latter will inevitably not behave as desired. However, through numerical optimisation, we construct a vacuum field in which 99.6 % of all trapped particles satisfy the maximum-$J$ condition.

We present new stellarator equilibria that have been optimized for reduced turbulent transport using nonlinear gyrokinetic simulations within the optimization loop. The optimization routine involves coupling the pseudo-spectral GPU-native gyrokinetic code GX with the stellarator equilibrium and optimization code DESC. Since using GX allows for fast nonlinear simulations, we directly optimize for reduced nonlinear heat fluxes. To handle the noisy heat flux traces returned by these simulations, we employ the simultaneous perturbation stochastic approximation (SPSA) method that only uses two objective function evaluations for a simple estimate of the gradient. We show several examples that optimize for both reduced heat fluxes and good quasi-symmetry as a proxy for low neoclassical transport. Finally, we run full transport simulations using the T3D stellarator transport code to evaluate the changes in the macroscopic profiles.

Quasisymmetry (QS), a hidden symmetry of the magnetic field strength, is known to support nested flux surfaces and provide superior particle confinement in stellarators. In this work, we study the ideal magnetohydrodynamic (MHD) equilibrium and stability of high-beta plasma in a large-aspect-ratio stellarator. In particular, we show that the lowest-order description of a near-axisymmetric equilibrium vastly simplifies the problem of three-dimensional quasisymmetric MHD equilibria, which can be reduced to a standard elliptic Grad–Shafranov equation for the flux function. We show that any large-aspect-ratio tokamak, deformed periodically in the vertical direction, is a stellarator with approximate volumetric QS. We discuss exact analytical solutions and numerical benchmarks. Finally, we discuss the ideal ballooning and interchange stability of some of our equilibrium configurations.

Large-amplitude current-driven plasma instabilities, which can transition to the Buneman instability, were observed in one-dimensional simulations to generate high-energy back-streaming ions. We investigate the saturation of multi-dimensional plasma instabilities and its effects on energetic ion formation. Such ions directly impact spacecraft thruster lifetimes and are associated with magnetic reconnection and cosmic ray inception. An Eulerian Vlasov–Poisson solver employing the grid-based direct kinetic method is used to study the growth and saturation of 2D2V collisionless, electrostatic current-driven instabilities spanning two dimensions each in the configuration (D) and velocity (V) spaces supporting ion and electron phase-space transport. Four stages characterise the electric potential evolution in such instabilities: linear modal growth, harmonic growth, accelerated growth via quasi-linear mechanisms alongside nonlinear fill-in and saturated turbulence. Its transition and isotropisation process bears considerable similarities to the development of hydrodynamic turbulence. While a tendency to isotropy is observed in the plasma waves, followed by electron and then ion phase spaces after several ion-acoustic periods, the formation of energetic back-streaming ions is more limited in the 2D2V than in the 1D1V simulations. Plasma waves formed by two-dimensional electrostatic kinetic instabilities can propagate in the direction perpendicular to the net electron drift. Thus, large-amplitude multi-dimensional waves generate high-energy transverse-streaming ions and eventually limit energetic backward-streaming ions along the longitudinal direction. The multi-dimensional study sheds light on interactions between longitudinal and transverse electrostatic plasma instabilities, as well as fundamental characteristics of the inception and sustenance of unmagnetised plasma turbulence.

We solve the linearized gyrokinetic equation, quasineutrality condition and Ampere's law to obtain the dispersion relation of microtearing modes (MTMs) in collisionless low-$\beta$ toroidal plasmas. Consistent with past studies, we find that MTMs are driven unstable by the electron temperature gradient and that this instability drive is mediated by magnetic drifts. The dispersion relation that we derive can be evaluated numerically very quickly and may prove useful for devising strategies to mitigate MTM instability in fusion devices.

The gyrokinetic theory of the residual flow, in the electrostatic limit, is revisited, with optimized stellarators in mind. We consider general initial conditions for the problem, and identify cases that lead to a non-zonal residual electrostatic potential, i.e. one having a significant component that varies within a flux surface. We investigate the behaviour of the ‘intermediate residual’ in stellarators, a measure of the flow that remains after geodesic acoustic modes have damped away, but before the action of the slower damping that is caused by unconfined particle orbits. The case of a quasi-isodynamic stellarator is identified as having a particularly large such residual, owing to the small orbit width achieved by optimization.

Collisionless charged particle motion and its transport in the two-wire model (TWM) with no axial magnetic fields is investigated numerically. The TWM configuration contains a magnetic X-point, and single particle motions in such a field have two conserved quantities: the total kinetic energy and the base field line value which is a quantity derived from the axial canonical momentum. As gyrating particles travel along the field lines, they may reach near the X-point region where the magnetic moment, the first adiabatic invariant, can be occasionally shifted due to a large gradient of the field. When the magnetic moment becomes large, resulting in a large Larmor radius, particles probabilistically cross the X-point to migrate to the opposite side of the TWM configuration. These phenomena are investigated with single particle simulations. We find that the statistical behaviour of the seemingly chaotic magnetic moment shifts are completely determined by the two aforementioned conserved quantities, and also that there exists a threshold energy, determined by the base field line value, allowing only particles with a higher energy to cross the separatrix and migrate. It is found that the crossing time is distributed exponentially, and that the migration confinement time, which is the average crossing time, is shorter for particles with a base field line closer to the separatrix and a higher energy. We provide an empirical expression, derived with the simulations, for estimating the collisionless migration confinement time.

This paper establishes a mean-field equation set and an energy theorem to provide a theoretical basis in view of the development of self-consistent, physics-based turbulent transport models for mean-field transport codes. A rigorous averaging procedure identifies the exact form of the perpendicular turbulent fluxes which are modelled by ad hoc diffusive terms in mean-field transport codes, next to other closure terms which are not commonly considered. Earlier work suggested that the turbulent $E\times B$ particle and heat fluxes, which are thus identified to be important closure terms, can be modelled to reasonable accuracy using the kinetic energy in the $E\times B$ velocity fluctuations ($k_{E}$). The related enstrophy led to further modelling improvements in an initial study, although further analysis is required. To support this modelling approach, transport equations are derived analytically for both quantities. In particular, an energy theorem is established in which the various source and sink terms of $k_{E}$ are shown to couple to mean-field and turbulent parallel kinetic energy, kinetic energy in the other perpendicular velocity components, the thermal energy and the magnetic energy. This provides expressions for the interchange, drift-wave and Reynolds stress terms amongst others. Note that most terms in these energy equations are in turn closure terms. It is suggested to evaluate these terms using reference data from detailed turbulence code simulations in future work.

In the limit of sufficiently fast rotation, rotating mirror traps are known to be stable against the loss-cone modes associated with conventional (non-rotating) mirrors. This paper calculates how quickly a mirror configuration must rotate in order for several of these modes to be stabilized (in particular, the high-frequency convective loss cone, drift cyclotron loss cone and Dory–Guest–Harris modes). Commonalities in the stabilization conditions for these modes then motivate a modified formulation of the Gardner free energy and diffusively accessible free energy to be used for systems in which the important modes have wavevectors that are orthogonal or nearly orthogonal to the magnetic field, as well as a modification to include the effects of a loss region in phase space.

A new magnetic mirror machine named KAIMIR (KAIST mirror) has been designed and constructed at the Korea Advanced Institute of Science and Technology (KAIST) to study mirror plasma physics and simulate the boundary regions of magnetic fusion plasmas such as in a tokamak. The purpose of this paper is to introduce the characteristics and initial experimental results of KAIMIR. The cylindrical vacuum chamber has a length of 2.48 m and a diameter of 0.5 m and consists of three sub-chambers, namely the source, centre and expander chambers. A magnetic mirror configuration is achieved by electromagnetic coils with a maximum magnetic field strength of 0.4 T at the mirror nozzles and 0.1 T at the centre. The source plasma is generated by a plasma washer gun installed in the source chamber with a pulse forming network system. The typical discharge time is ~12 ms with a ~6 ms (1–7 ms) steady period. Initial results show that the on-axis electron density at the centre is 1019–20 m−3 and the electron temperature is 4–7 eV. Two parameters were varied in this initial phase, the source power and the mirror ratio, which is the ratio of highest to lowest magnetic field strength in the mirror-confined region. We observed that the increase of the electron density was mitigated for a source power above 0.2 MW. It was also found that the electron density increases almost linearly with the mirror ratio. Accordingly, the stored electron energy was also linearly proportional to the mirror ratio, similar to the scaling of the gas dynamic trap.

Omnigenity is a desirable property of toroidal magnetic fields that ensures confinement of trapped particles. Confining charged particles is a basic requirement for any fusion power plant design, but it can be difficult to satisfy with the non-axisymmetric magnetic fields used by the stellarator approach. Every ideal magnetohydrodynamic equilibrium previously found to approximate omnigenity has been either axisymmetric, quasi-symmetric or has poloidally closed contours of magnetic field strength $B$. However, general omnigenous equilibria are a much larger design space than these subsets. A new model is presented and employed in the DESC stellarator optimization suite to represent and discover the full parameter space of omnigenous equilibria. Although exact omnigenity aside from quasi-symmetry is impossible, these results reveal that excellent particle confinement can be achieved in practice. Examples far from quasi-symmetry with poloidally, helically and toroidally closed $B$ contours are attained with DESC and shown to have low neoclassical collisional transport and fast particle losses.

BOUT++ turbulence simulations were performed to investigate the impact of turbulence spreading on the edge localized mode (ELM) size and divertor heat flux width $({\lambda _q})$ broadening in small ELM regimes. This study is motivated by EAST experiments. BOUT++ linear simulations of a pedestal radial electric field (Er) scan show that the dominant toroidal number mode (n) shifts from high-n to low-n, with a narrow mode spectrum, and the maximum linear growth rate increases as the pedestal Er well deepens. The nonlinear simulations show that as the net E × B pedestal flow increases, the pressure fluctuation level and its inward penetration beyond the top of the pedestal both increase. This leads to a transition from small ELMs to large ELMs. Both inward and outward turbulence spreading are sensitive to the scrape-off-layer (SOL) plasma profiles. The inward turbulence spreading increases for the steep SOL profiles, leading to increasing pedestal energy loss in the small ELM regime. The SOL width $({\lambda _q})$ is significantly broadened progressing from the ELM-free to small ELM regime, due to the onset of strong radial turbulent transport. The extent of the SOL width $({\lambda _q})$ broadening depends strongly on outward turbulence spreading. The fluctuation energy intensity flux ${\varGamma _\varepsilon }$ at the separatrix can be enhanced by increasing either pedestal Er flow shear or local SOL pressure gradient. The ${\lambda _q}$ is broadened as the fluctuation energy intensity flux ${\varGamma _\varepsilon }$ at the last close flux surface (LCFS) increases. Local SOL E × B flow shear will restrain outward turbulence spreading and the associated heat flux width broadening. Operating in H-mode with small ELMs has the potential to solve two critical problems: reducing the ELM size and broadening the SOL width.

We investigate the effects of different guard geometries on the currents to needle-type Langmuir probes. The results are based on particle-in-cell numerical simulations. We show that if the guard length is less than 6–8 Debye lengths there can be a significant effect on the currents to the probe. A guard radius should not be larger than the Debye length, otherwise it can also significantly affect the currents. However, since guard radii are often close to the probe radius, the second condition is usually satisfied.

Generalising the Elsässer variables, we introduce the $Q$-variables. These are more flexible than the Elsässer variables, because they also allow us to track waves with phase speeds different than the Alfvén speed. We rewrite the magnetohydrodynamics (MHD) equations with these $Q$-variables. We consider also the linearised version of the resulting MHD equations in a uniform plasma, and recover the classical Alfvén waves, but also separate the fast and slow magnetosonic waves into upward- and downward-propagating waves. Moreover, we show that the $Q$-variables may also track the upward- and downward-propagating surface Alfvén waves in a non-uniform plasma, displaying the power of our generalisation. In the end, we lay the mathematical framework for driving solar wind models with a multitude of wave drivers.

The heating rate of plasma electrons induced by external fields or other processes can be used as an experimental tool to measure fundamental plasma properties such as electrical conductivity or electron–ion collision rates. We have developed a technique that can measure electron heating rates in ultracold neutral plasmas (UNPs) with $\sim 10\,\%$ precision while simultaneously referencing the measurement to a calibrated amount of heating. This technique uses a sequence of applied electric fields in four sections: to control the ratio of electrons to ions in the UNP; to provide a time for the application of fields that cause electron heating and subsequent thermalization of the electrons after the application of those fields; to extract electrons from the UNP using a method sensitive to electron temperature that allows the measurement of electron heating; and to extract the remaining electrons to measure the total electron (and therefore ion) number. The primary signal used to measure the heating rate is the measurement of the number of electrons that escape in the third section of the experiment as a larger number of escaping electrons indicates a larger amount of heating. We illustrate the use of this technique by measuring electron heating caused by high-frequency radiofrequency (RF) fields. In addition to the main technique, several subtechniques to calibrate the electron temperature, electron density, amount of heating and applied RF field amplitude were developed as well.