In this paper, two different radiating structures fed with modified L-probe, are reported using a circuit theory concept. The proposed antennas are operating in wireless local area network (WLAN) and universal mobile telecommunications system (UMTS) frequency bands. In the first design, an E-shaped patch is studied to increase the bandwidth. It is observed that the bandwidth is directly proportional to notch dimensions. In the second design, E-shaped patch is modified to reduce the antenna size up to 30% with high bandwidth. In the first design, measured bandwidth and gain achieved are 32.68% (1.92–2.67 GHz) and 8.43 dBi while in second design it is 34.19% (1.94–2.74 GHz) and 8.39 dBi, respectively. Radiation patterns for both the antennas are symmetrical and broadside in nature. The proposed antennas are fabricated and measured results compare well with the theoretical and simulated results.

A compact circularly polarized (CP) rectenna with low profile and high efficiency based on the artificial magnetic conductor (AMC) is proposed in this paper. The receiving CP antenna is a coplanar stripline fed dual rhombic loop with an AMC reflector. The proposed AMC reflector not only improves the antenna gain to 9.8 dBi but also decreases the profile to 0.1 λ0. The AMC reflector also makes the antenna have a harmonic suppression function so the low pass filter between the rectifying circuit and the antenna could be omitted and the rectenna has a compact structure. According to the measured results, the rectenna has the highest conversion efficiency of 76% on the load of 240 Ω with the received power of 117.5 mW. When the linearly polarized transmitting antenna is rotated, the conversion efficiency of the CP rectenna maintains a constant high conversion efficiency of 74%. The compact structure and CP operation of the rectenna made it a good candidate of the wireless battery for some electronic devices and far-distance microwave power transmission.

In this study, the implicit Crank–Nicolson finite-difference time-domain (CN-FDTD) method is applied to discretize the governing telegrapher's equations of a composite right-/left-handed (CRLH) coupled-line coupler. The unconditionally stable CN-FDTD is compared with the conventional leap-frog (LF) FDTD method. The results obtained from the CN-FDTD scheme show up to 10 times increase in the temporal step size, reflecting in a dramatic decrease in processing time; in addition to having a good agreement with the LF method and the measurements.

This paper describes the design and characterization of a compact substrate integrated waveguide (SIW) fed antenna for the 122 GHz industrial, scientific, and medical band. The use of a single RO4350B substrate layer and the SIW feeding ensure a low-cost fabrication. Two versions of the antenna are presented differing in antenna gain and size. For measurement purpose, a transition from rectangular waveguide to SIW is introduced. Measurements of the radiation pattern have been performed and show good agreement with the numerical results for both antennas and an antenna gain up to 7.14 dBi.

This paper reports on an ultra-wideband low-noise distributed amplifier (LNDA) in a transferred-substrate InP double heterojunction bipolar transistor (DHBT) technology which exhibits a uniform low-noise characteristic over a large frequency range. To obtain very high bandwidth, a distributed architecture has been chosen with cascode unit gain cells. Each unit cell consists of two cascode-connected transistors with 500 nm emitter length and ft/fmax of ~360/492 GHz, respectively. Due to optimum line-impedance matching, low common-base transistor capacitance, and low collector-current operation, the circuit exhibits a low-noise figure (NF) over a broad frequency range. A 3-dB bandwidth from 40 to 185 GHz is measured, with an NF of 8 dB within the frequency range between 75 and 105 GHz. Moreover, this circuit demonstrates the widest 3-dB bandwidth operation among all reported single-stage amplifiers with a cascode configuration. Additionally, this work has proposed that the noise sources of the InP DHBTs are largely uncorrelated. As a result, a reliable prediction can be done for the NF of ultra-wideband circuits beyond the frequency range of the measurement equipment.

In this paper, based on a novel multimode stub-loaded resonator, a second-order quad-band bandpass filter (BPF) with mixed electric and magnetic coupling is presented. The electric coupling and magnetic coupling are realized by arranging the parallel coupled lines and the grounded stub, respectively. Eight controllable resonant modes can be simultaneously excited and easily tuned. Eight transmission zeros are created, enhancing the passband selectivity. In addition, the bandwidths can be controlled independently by adjusting the coupling strength. A quad-band BPF centering at 0.67, 1.51, 2.84, 3.58 GHz with respective 3 dB fractional bandwidths of 13.4, 15.6, 9.2, 11.5% is designed, fabricated, and measured. The filter is compact with overall size 0.058λg × 0.13λg. The measured results show a good consistence with the simulated ones.

A novel design of compact and light-weight horn mounted cylindrical dielectric resonator antenna (CDRA) fed by substrate integrated waveguide (SIW) resonator has been investigated for high gain and multiband applications. SIW resonator contains two closely spaced longitudinal slots of equal length and unequal width to excite the CDRA. These slots are responsible for introducing triple resonating bands. The excited mode in dielectric resonator by longitudinal slots is EH11δ mode. The achieved impedance bandwidths are 65, 180, and 240 MHz at resonant frequencies 9.78, 10.58, and 11.84 GHz, respectively, for |S11| <−10 dB. Copper-taped horn enhances the gain of antenna more than 2 dB for all resonating bands. The measured peak value of gain is 9.3 dBi at ~11.84 GHz.

A printed multiband Multi-Input Multiple-Output (MIMO) antenna is proposed in this paper. This MIMO antenna system comprises two symmetric printed monopole antennas. Each antenna element consists of multiple bend lines, producing four resonant modes and covering the GSM900, PCS, LTE2300, and 5G bands. Simulated and measured results prove that the proposed MIMO antenna can be applied to traditional 2G, 3G, 4G, and present 5G mobile communication. By etching four inverted L-shaped grooves on its ground plate, mutual coupling between the adjacent antenna elements has been suppressed. This makes the |S21| at all four resonant modes is lower than −40 dB. In addition, its low coupling mechanism has been analyzed by surface current distribution. The designed multiband MIMO antenna provides an idea of reference to realize low mutual coupling between antenna elements, which is also realizable in infrared or optical regimes with appropriate designs.

A power MOSFET-based push–pull configuration nanosecond-pulse generator has been designed, constructed, and characterized to permeabilize cells for biological and medical applications. The generator can deliver pulses with durations ranging from 80 ns up to 1 µs and pulse amplitudes up to 1.4 kV. The unit has been tested for in vitro experiments on a medulloblastoma cell line. Following the exposure of cells to 100, 200, and 300 ns electric field pulses, permeabilization tests were carried out, and viability tests were conducted to verify the performance of the generator. The maximum temperature rise of the biological load was also calculated based on Joule heating energy conservation and experimental validation. Our results indicate that the developed device has good capabilities to achieve well-controlled electro-manipulation in vitro.

This paper presents a microwave absorber with dual absorption bandwidth response based upon the direction of electromagnetic wave incident on the surface. The design unit cell comprises a staircase shape metallic patch on the top plane and an array of 2×2 meander square ring shape dual layer frequency selective surfaces (FSS) in the middle and bottom planes. The relative absorption bandwidth (RAB) of 39.40% (5 GHz) with more than 90% absorption of incident wave power is achieved when an electromagnetic wave impinges normally on the top plane making it suitable for wideband applications in the X and Ku bands. For the wave incident normally on the bottom plane, the same structure gives narrow band absorption with an RAB of 2.29% (260 MHz) for more than 90% absorption around 11 GHz. Thus, this bi-directional ability of the proposed design is found to be suitable for radar absorbing material, multi-bandwidth, and diverse applications. The absorption performance is also studied for different values of incident angle. The distribution of surface currents on the staircase patch and on the two FSS layers at resonant frequencies of 11 GHz and 14 GHz is analyzed to elaborate the absorption phenomenon physically. The prototype of this design is fabricated and the experimental results are found to be closely following the simulated one.

The spectral congestion in existing Industrial, Scientific, and Medical (ISM) Wireless Local Area Network (WLAN) bands has led to the emergence of new ISM bands (Unlicensed National Information Infrastructure (UNII)) from 5.150 to 5.710 GHz. In this paper, a simple uniplanar, high gain, microstrip antenna is designed, fabricated, and tested for existing WLAN and new UNII standards. The proposed antenna provides dualband operation by joining two rectangular rings and cutting Defected Ground Structure in the Coplanar Wave Guide (CPW) feed. The experimental and simulation results show good return loss characteristics and stable radiation pattern over the desired frequency bands ranging from 2.20 to 2.65 GHz (WLAN band) at a lower frequency and from 5.0 to 5.45 GHz (UNII-1/UNII-2 bands). The measured peak gains are 5.5 and 4.9 dBi at 2.45 GHz (WLAN band) and 5.15 GHz (UNII band), respectively.

In this paper, high-gain cavity backed patch antenna arrays are proposed based on low temperature co-fired ceramic technology at 140 GHz. By introducing a substrate integrated cavity to the patch antenna element, the gain is enhanced by 3.3 dB. Moreover, a rectangular ring is loaded around the patch for better impedance matching and further gain enhancement. The final simulated maximum gain of the proposed antenna element is 9.8 dBi. Based on the proposed high-gain antenna element, a 4 × 4-element array and an 8 × 8- element array are presented. The 4 × 4-element array shows a measured maximum gain of 16.9 dBi with 9.5 GHz bandwidth (136.2–145.7 GHz) and the 8 × 8-element array shows a measured maximum gain of 21.8 dBi with 9.8 GHz bandwidth(136.7–146.5 GHz), respectively.

The paper presents a new coplanar waveguide (CPW)-fed rectangular patch antenna with a square-shaped ground plane that can be employed in modern advanced navigation systems. For realizing broad impedance bandwidth in the proposed antenna, a wide slot is introduced in the square ground plane and the rectangular patch is shifted toward the left edge of the ground surface. In addition, by means of introducing square-shaped stubs near the left and right edge of the ground plane, the circular polarization is achieved at L1, L2, and L5 satellite bands. As per the simulation results, the proposed antenna provides a wide impedance bandwidth (S11<−10 dB) of 123% (1.12–4.72 GHz) and 3 dB axial ratio bandwidth of 11% (1.15–1.29 GHz) and 18% (1.5–1.8 GHz) suitable for multipurpose wireless applications. The designed single feed circularly polarized antenna is low profile, small size, light weight and easily integrable with other high-frequency communication devices. To validate radiation performance of the proposed structure, the antenna is fabricated and integrated with the commercially available Global Positioning System (GPS) receiver and it is found that the measured values are in close agreement with the desired results.

In this work, simple, low profile, compact quarter-mode substrate-integrated waveguide (QMSIW)-based antennas are proposed for Wireless Local Area Network (WLAN) at 5.2/5.5 GHz and Wireless Body Area Network (WBAN) at 5.8 GHz, respectively. By implementing QMSIW technique, the electrical size of the antenna is reduced up to 1/4th of the conventional circular SIW cavities. Thanks to the quarter mode concept, the antenna size is reduced significantly by preserving its dominant mode. The resonant frequency of the dominant mode TM010 is independently tuned at 5.2, 5.5, and 5.8 GHz after loading the QMSIW cavity with metalized via holes, subsequently. The on-body performance of the antenna is verified on pork tissues at 5.8 GHz and it is found to be insensitive with respect to surroundings. The measured gain and simulated efficiency of the proposed antenna at 5.8 GHz in free space are 4.8 dBi and 92%, while in the proximity of pork tissues values are 3.25 dBi and 57%, respectively. Moreover, the measurement results demonstrate a good matching with the simulation results.