Plasma-enhanced atomic layer deposition (PEALD) is gaining interest in thin films for laser applications, and post-annealing treatments are often used to improve thin film properties. However, research to improve thin film properties is often based on an expensive and time-consuming trial-and-error process. In this study, PEALD-HfO2 thin film samples were deposited and treated under different annealing atmospheres and temperatures. The samples were characterized in terms of their refractive indices, layer thicknesses and O/Hf ratios. The collected data were split into training and validation sets and fed to multiple back-propagation neural networks with different hidden layers to determine the best way to construct the process–performance relationship. The results showed that the three-hidden-layer back-propagation neural network (THL-BPNN) achieved stable and accurate fitting. For the refractive index, layer thickness and O/Hf ratio, the THL-BPNN model achieved accuracy values of 0.99, 0.94 and 0.94, respectively, on the training set and 0.99, 0.91 and 0.90, respectively, on the validation set. The THL-BPNN model was further used to predict the laser-induced damage threshold of PEALD-HfO2 thin films and the properties of the PEALD-SiO2 thin films, both showing high accuracy. This study not only provides quantitative guidance for the improvement of thin film properties but also proposes a general model that can be applied to predict the properties of different types of laser thin films, saving experimental costs for process optimization.

A multi-shot target assembly and automatic alignment procedure for laser–plasma proton acceleration at high repetition rate are introduced. The assembly is based on a multi-target rotating wheel capable of hosting more than 5000 targets, mounted on a 3D motorized stage to allow rapid replenishment and alignment of the target material between laser irradiations. The automatic alignment procedure consists of a detailed mapping of the impact positions at the target surface prior to the irradiation that ensures stable operation of the target, which alongside the purpose-built design of the target wheel, enables operation at rates up to 10 Hz. Stable and continuous laser-driven proton acceleration at 10 Hz is demonstrated, with observed cut-off energy stability about 15%.

The mid-infrared optical frequency comb is a powerful tool for gas sensing. In this study, we demonstrate a simple mid-infrared dual-comb spectrometer covering 3–4 μm in LiNbO3 waveguides. Based on a low-power fiber laser system, the mid-infrared comb is achieved via intra-pulse difference frequency generation in the LiNbO3 waveguide. We construct pre-chirp management before supercontinuum generation to control spatiotemporal alignment for pump and signal pulses. The supercontinuum is directly coupled into a chirped periodically poled LiNbO3 waveguide for the 3–4 μm idler generation. A mid-infrared dual-comb spectrometer based on this approach provides a 100 MHz resolution over 25 THz coverage. To evaluate the applicability for spectroscopy, we measure the methane spectrum using the dual-comb spectrometer. The measured results are consistent with the HITRAN database, in which the root mean square of the residual is 3.2%. This proposed method is expected to develop integrated and robust mid-infrared dual-comb spectrometers on chip for sensing.

The Righi–Leduc heat flux generated by the self-generated magnetic field in the ablative Rayleigh–Taylor instability driven by a laser irradiating thin targets is studied through two-dimensional extended-magnetohydrodynamic simulations. The perturbation structure gets into a low magnetization state though the peak strength of the self-generated magnetic field could reach hundreds of teslas. The Righi–Leduc effect plays an essential impact both in the linear and nonlinear stages, and it deflects the total heat flux towards the spike base. Compared to the case without the self-generated magnetic field included, less heat flux is concentrated at the spike tip, finally mitigating the ablative stabilization and leading to an increase in the velocity of the spike tip. It is shown that the linear growth rate is increased by about 10% and the amplitude during the nonlinear stage is increased by even more than 10% due to the feedback of the magnetic field, respectively. Our results reveal the importance of Righi–Leduc heat flux to the growth of the instability and promote deep understanding of the instability evolution together with the self-generated magnetic field, especially during the acceleration stage in inertial confinement fusion.

In ultra-short laser pulses, small changes in dispersion properties before the final focusing mirror can lead to severe pulse distortions around the focus and therefore to very different pulse properties at the point of laser–matter interaction, yielding unexpected interaction results. The mapping between far- and near-field laser properties intricately depends on the spatial and angular dispersion properties as well as the focal geometry. For a focused Gaussian laser pulse under the influence of angular, spatial and group-delay dispersion, we derive analytical expressions for its pulse-front tilt, duration and width from a fully analytic expression for its electric field in the time–space domain obtained with scalar diffraction theory. This expression is not only valid in and near the focus but also along the entire propagation distance from the focusing mirror to the focus. Expressions relating angular, spatial and group-delay dispersion before focusing at an off-axis parabola, where they are well measurable, to the respective values in the pulse’s focus are obtained by a ray tracing approach. Together, these formulas are used to show in example setups that the pulse-front tilts of lasers with small initial dispersion can become several tens of degrees larger in the vicinity of the focus while being small directly in the focus. The formulas derived here provide the analytical foundation for observations previously made in numerical experiments. By numerically simulating Gaussian pulse propagation and measuring properties of the pulse at distances several Rayleigh lengths off the focus, we verify the analytic expressions.

Polarized electron beam production via laser wakefield acceleration in pre-polarized plasma is investigated by particle-in-cell simulations. The evolution of the electron beam polarization is studied based on the Thomas–Bargmann–Michel–Telegdi equation for the transverse and longitudinal self-injection, and the depolarization process is found to be influenced by the injection schemes. In the case of transverse self-injection, as found typically in the bubble regime, the spin precession of the accelerated electrons is mainly influenced by the wakefield. However, in the case of longitudinal injection in the quasi-1D regime (for example, F. Y. Li et al., Phys. Rev. Lett. 110, 135002 (2013)), the direction of electron spin oscillates in the laser field. Since the electrons move around the laser axis, the net influence of the laser field is nearly zero and the contribution of the wakefield can be ignored. Finally, an ultra-short electron beam with polarization of $99\%$ can be obtained using longitudinal self-injection.

To meet the demands of laser-ion acceleration at a high repetition rate, we have developed a comprehensive diagnostic system for real-time and in situ monitoring of liquid sheet targets (LSTs). The spatially resolved rapid characterizations of an LST’s thickness, flatness, tilt angle and position are fulfilled by different subsystems with high accuracy. With the help of the diagnostic system, we reveal the dependence of thickness distribution on collision parameters and report the 238-nm liquid sheet generated by the collision of two liquid jets. Control methods for the flatness and tilt angle of LSTs have also been provided, which are essential for applications of laser-driven ion acceleration and others.

Based on the paraxial wave equation, this study extends the theory of small-scale self-focusing (SSSF) from coherent beams to spatially partially coherent beams (PCBs) and derives a general theoretical equation that reveals the underlying physics of the reduction in the B-integral of spatially PCBs. From the analysis of the simulations, the formula for the modulational instability (MI) gain coefficient of the SSSF of spatially PCBs is obtained by introducing a decrease factor into the formula of the MI gain coefficient of the SSSF of coherent beams. This decrease can be equated to a drop in the injected light intensity or an increase in the critical power. According to this formula, the reference value of the spatial coherence of spatially PCBs is given, offering guidance to overcome the output power limitation of the high-power laser driver due to SSSF.

The development of small-scale self-focusing in a nonlinear Kerr medium after preliminary self-filtering of a laser beam propagating in free space is studied numerically. It is shown that, under definite conditions, due to self-filtering, filamentation instability (beam splitting into filaments) either occurs at significantly larger values of the B-integral, or does not occur at all. In the latter case, there develops the honeycomb instability revealed in this work. This instability is the formation of a random honeycomb structure in the beam cross-section. It is shown that self-filtering can significantly increase the permissible values of the B-integral, at which the beam quality remains acceptable.

Tight focusing with very small f-numbers is necessary to achieve the highest at-focus irradiances. However, tight focusing imposes strong demands on precise target positioning in-focus to achieve the highest on-target irradiance. We describe several near-infrared, visible, ultraviolet and soft and hard X-ray diagnostics employed in a ∼1022 W/cm2 laser–plasma experiment. We used nearly 10 J total energy femtosecond laser pulses focused into an approximately 1.3-μm focal spot on 5–20 μm thick stainless-steel targets. We discuss the applicability of these diagnostics to determine the best in-focus target position with approximately 5 μm accuracy (i.e., around half of the short Rayleigh length) and show that several diagnostics (in particular, 3$\omega$ reflection and on-axis hard X-rays) can ensure this accuracy. We demonstrated target positioning within several micrometers from the focus, ensuring over 80% of the ideal peak laser intensity on-target. Our approach is relatively fast (it requires 10–20 laser shots) and does not rely on the coincidence of low-power and high-power focal planes.

We report the first high-repetition-rate generation and simultaneous characterization of nanosecond-scale return currents of kA-magnitude issued by the polarization of a target irradiated with a PW-class high-repetition-rate titanium:sapphire laser system at relativistic intensities. We present experimental results obtained with the VEGA-3 laser at intensities from $5\times {10}^{18}$ to $1.3\times {10}^{20}$ W cm${}^{-2}$. A non-invasive inductive return-current monitor is adopted to measure the derivative of return currents of the order of kA ns${}^{-1}$ and analysis methodology is developed to derive return currents. We compare the current for copper, aluminium and Kapton targets at different laser energies. The data show the stable production of current peaks and clear prospects for the tailoring of the pulse shape, which is promising for future applications in high-energy-density science, for example, electromagnetic interference stress tests, high-voltage pulse response measurements and charged particle beam lensing. We compare the target discharge of the order of hundreds of nC with theoretical predictions and a good agreement is found.

The power scaling on short wavelength (SW) fiber lasers operating around 1 μm are in significant demand for applications in energy, environment and industry. The challenge for performance scalability of high-power SW lasers based on rare-earth-doped fiber primarily lies in the physical limitations, including reabsorption, amplified spontaneous emission and parasitic laser oscillation. Here, we demonstrate an all-fiberized, purely passive SW (1018 nm) random-distributed-feedback Raman fiber laser (RRFL) to validate the capability of achieving high-power output at SWs based on multimode laser diodes (LDs) direct pumping. Directly pumped by multimode LDs, the high-brightness RRFL delivers over 656 W, with an electro-optical efficiency of 20% relative to the power. The slope efficiency is 94%. The beam quality M2 factor is 2.9 (which is ~20 times that of the pump) at the maximum output signal power, achieving the highest brightness enhancement of 14.9 in RRFLs. To the best of our knowledge, this achievement also represents the highest power record of RRFLs utilizing multimode diodes for direct pumping. This work may not only provide a new insight into the realization of high-power, high-brightness RRFLs but also is a promising contender in the power scaling of SWs below 1 μm.

Dr. Jie Zhang, a distinguished physicist, has made significant contributions in the fields of high-energy-density physics and inertial confinement fusion. Because of these, he was elected academician of the Chinese Academy of Sciences in 2003, academician of the German National Academy of Sciences in 2007, Fellow of the Academy of Sciences for the Developing World (TWAS) in 2008, foreign member of the Royal Academy of Engineering in the United Kingdom in 2011 and foreign associate of the National Academy of Sciences in the United States in 2012. In 2015, he was awarded the prestigious Edward Teller Medal, the most important international award in inertial confinement fusion and high-energy-density physics. In 2021, he was awarded the Future Science Prize in Physical Sciences.

The damage characteristics of fused silica were investigated under low-temporal coherence light (LTCL). It was found that the laser-induced damage threshold (LIDT) of fused silica for the LTCL was lower than that of the single longitudinal mode pulse laser, and for the LTCLs, the LIDTs decrease with the increasing of laser bandwidth, which is not consistent with the temporal spike intensity. This is due to the nonlinear self-focusing effect and multi-pulse accumulation effect. The specific reasons were analyzed based on theoretical simulation and experimental study. This research work is helpful and of great significance for the construction of high-power LTCL devices.

The problem of optimizing the parameters of a laser pulse compressor consisting of four identical diffraction gratings is solved analytically. The goal of optimization is to obtain maximum pulse power, completely excluding both beam clipping on gratings and the appearance of spurious diffraction orders. The analysis is carried out in a general form for an out-of-plane compressor. Two particular ‘plane’ cases attractive from a practical point of view are analyzed in more detail: a standard Treacy compressor (TC) and a compressor with an angle of incidence equal to the Littrow angle (LC). It is shown that in both cases the LC is superior to the TC. Specifically, for 160-cm diffraction gratings, optimal LC design enables 107 PW for XCELS and 111 PW for SEL-100 PW, while optimal TC design enables 86 PW for both projects.

A colliding microjet liquid sheet target system was developed and tested for pairs of round nozzles of 10, 11 and 18 μm in diameter. The sheet’s position stability was found to be better than a few micrometers. Upon interaction with 50 mJ laser pulses, the 18 μm jet has a resonance amplitude of 16 μm at a repetition rate of 33 Hz, while towards 100 Hz it converges to 10 μm for all nozzles. A white-light interferometric system was developed to measure the liquid sheet thickness in the target chamber both in air and in vacuum, with a measurement range of 182 nm–1 μm and an accuracy of ±3%. The overall shape and 3D shape of the sheet follow the Hasson–Peck model in air. In vacuum versus air, the sheet gradually loses 10% of its thickness, so the thinnest sheet achieved was below 200 nm at a vacuum level of 10–4 mbar, and remained stable for several hours of operation.

In this study, we investigated the influence of fiber parameters on stimulated Raman scattering (SRS) and identified a unique pattern of SRS evolution in the counter tandem pumping configuration. Our findings revealed that the SRS threshold in counter-pumping is predominantly determined by the length of the output delivery fiber rather than the gain fiber. By employing the counter tandem pumping scheme and optimizing the fiber parameters, a 10 kW fiber laser was achieved with beam quality M2 of 1.92. No mode instability or severe SRS limitation was observed. To our knowledge, this study achieved the highest beam quality in over 10 kW fiber lasers based on conventional double-clad Yb-doped fiber.

The intensity attenuation of a high-power laser is a frequent task in the measurements of optical science. Laser intensity can be attenuated by inserting an optical element, such as a partial reflector, polarizer or absorption filter. These devices are, however, not always easily applicable, especially in the case of ultra-high-power lasers, because they can alter the characteristics of a laser beam or become easily damaged. In this study, we demonstrated that the intensity of a laser beam could be effectively attenuated using a random pinhole attenuator (RPA), a device with randomly distributed pinholes, without changing the beam properties. With this device, a multi-PW laser beam was successfully attenuated and the focused beam profile was measured without any alterations of its characteristics. In addition, it was confirmed that the temporal profile of a laser pulse, including the spectral phase, was preserved. Consequently, the RPA possesses significant potential for a wide range of applications.

The high-energy/high-intensity laser facility PHELIX of the GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt, Germany, has been in operation since 2008. Here, we review the current system performance, which is the result of continuous development and further improvement. Through its versatile frontend architecture, PHELIX can be operated in both long- and short-pulse modes, corresponding to ns-pulses with up to 1 kJ pulse energy and sub-ps, 200 J pulses, respectively. In the short-pulse mode, the excellent temporal contrast and the control over the wavefront make PHELIX an ideal driver for secondary sources of high-energy ions, neutrons, electrons and X-rays. The long-pulse mode is mainly used for plasma heating, which can then be probed by the heavy-ion beam of the linear accelerator of GSI. In addition, PHELIX can now be used to generate X-rays for studying exotic states of matter created by heavy-ion heating using the ion beam of the heavy-ion synchrotron of GSI.

To overcome Yb lasing, a kilowatt-level 1535 nm fiber laser is utilized to in-band pump an Er:Yb co-doped fiber (EYDF) amplifier. The output power of a 301 W narrow-linewidth EYDF amplifier operating at 1585 nm, with 3 dB bandwidth of 150 pm and ${M}^2$< 1.4, is experimentally demonstrated. To the best of our knowledge, it is the highest output power achieved in L-band narrow-linewidth fiber amplifiers with good beam quality. Theoretically, a new ion transition behavior among energy levels for in-band pumping EYDF is uncovered, and a spatial-mode-resolved nonlinearity-assisted theoretical model is developed to understand its internal dynamics. Numerical simulations reveal that the reduction in slope efficiency is significantly related to excited-state absorption (ESA). ESA has a nonlinear hindering effect on power scaling. It can drastically lower the pump absorption and slope efficiency with increasing pump power for in-band pumped EYDF amplifiers. Meanwhile, optimized approaches are proposed to improve its power to the kilowatt level via in-band pumping.