Published online by Cambridge University Press: 05 December 2015
In contrast to voice traffic, wireless data traffic is mostly asymmetric and time-variant with a requirement for a dynamically adjusting technique to divide the uplink (UL) and downlink (DL) resource. In typical cellular systems, the length of UL resource and the length of DL resource are predetermined. In a typical frequency-division duplex (FDD) system, the UL and DL transmission use distinctive frequency bands, which is especially efficient in cases of symmetric traffic due to the avoidance of possible interference between UL and DL transmission. However the FDD system has difficulty in adjusting its UL and DL resource in asymmetric traffic since the resource division is operated by the duplexer in the hardware. A typical time-division duplex (TDD) system is capable of adjusting the UL and DL transmission in time domain. However, due to the requirement of synchronization in order to eliminate the interference, the UL and DL resource is still fixed. To support asymmetric and time-variant traffic, LTE provides small cell base stations (BSs) with dynamic TDD by supporting seven TDD UL/DL configurations, enabling the BSs dynamically to change the ratio of UP and DL resource to handle the time-variant traffic. Nevertheless, such a scheme also induces two type of interference: BS–BS interference and MS–MS interference. In this chapter the interference issues and several interference mitigation methods will be extensively discussed.
Dynamic TDD system overview
Introduction
To divide the UL and DL traffic resource, some typical communication systems apply FDD, where different frequency bands are used for transmitting and receiving, the benefit of which is that no interference will be incurred between UL and DL signals. For the symmetrical traffic on UL and DL (e.g., voice service), the FDD system is suitable since the BS is assigned the same amount of radio resource in the UL and DL. Whereas for wireless data services, FDD is not flexible enough to handle this type of dynamic UL/DL traffic due to the character of the UL and DL traffic being asymmetric and time-variant in these cases.
Compared to FDD, TDD is different in that the UL and DL resource is divided in time domain and can be easily adjusted. It possesses an advantage of greater flexibility in handling the dynamic UL/DL traffic. In the TDD system, the boundary between the UL and DL duty cycle is adaptively adjustable according to service requirements.
To save this book to your Kindle, first ensure [email protected] is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.