Laterite profiles developed from granite in southwestern Australia were studied by scanning electron microscopy. The morphology of soil materials reflects the mineralogy of secondary minerals formed from feldspar. In the saprolite, etched feldspar surfaces are coated with kaolinite or radiating, spherical aggregates of tubular halloysite. In the lower pallid zone these minerals have replaced most of the feldspar. In the upper pallid zone a porous framework has developed consisting mainly of quartz and gibbsite with 5-/μm euhedral gibbsite crystals in voids. Halloysite crystals in the upper pallid zone are partly unrolled and have splayed ends. Differences in mineralogy and morphology between profiles are thought to be due to variations in the intensity of leaching.

Sixty-five bauxite samples of different ages and origins were studied by scanning electron microscopy. Only broken surfaces of the specimens were investigated. Size and form of individual crystals and of grain aggregates were studied as were different types of microtextures and space-fillers.

Grain size varies from 0.05 μm to 1 mm. Smallest is the grain size of young karstic bauxite deposits that is explained by a physicochemical retardation effect of the carbonate environment. Significant differences were found by comparing the space-filling of karstic and lateritic bauxite deposits. High-level and low-level lateritic deposits show differences as well.

A combined use of macroscopic observations, petrographie microscopy, electron microprobe, SEM, and TЕM furnishes the best clues for any genetic interpretation of bauxites. SEM studies are useful in solving technological problems of bauxite processing.

The adsorption of Cu2+ on microcrystalline gibbsite and boehmite from aqueous solutions having 2/1 and 5/1 glycine/Cu ratios has been studied using electron spin resonance (ESR). The presence of glycine inhibited metal adsorption on gibbsite above pH 5, apparently by reducing Cu hydrolysis. The preferred adsorbed species on gibbsite and boehmite, based upon the ESR parameters, were probably Cu(gly)+ and Cu(gly)20, respectively. In both experiments, rigidly-bound ternary complexes formed with Cu2+ simultaneously bonding to the surface and one or more ligands. A large excess of glycine destabilized the ternary complex and caused the desorption of Cu2+. The preferred orientation of the Cu complex on gibbsite suggests that the adsorption occurred at crystal steps and that the glycine molecule hydrogen bonded to hydroxyls of the (001) surface.

Alumina is produced from bauxite, which contains a mixture of various oxides, such as aluminum (Al), iron (Fe), silicon (Si), and titanium (Ti). Bauxite can also be considered a source of several other valuable metals, such as scandium (Sc), vanadium (V), and gallium (Ga). The composition and mineralogy of alumina determine their economic value, but their characteristics vary by locality. The physicochemical characteristics of bauxites can also be influenced largely by weathering processes, even within the same locality. For this reason, the present study was undertaken with the objective of comparing the characterization data of three bauxite samples collected, which will be referred to as D, E, and F, from the Cruz Alta do Pará plateau in northern Brazil. The samples were solubilized by multi-acid digestion and fusion with lithium metaborate to quantify their metal compositions by inductively coupled plasma optical emission spectrometry (ICP-OES). The mineralogical characterization was conducted by X-ray diffraction (XRD), and the phase changes of minerals in bauxite were detected by thermogravimetric analysis (TGA/DTG). The total organic carbon (TOC) technique was used to quantify the C in the samples, and the moisture content was also measured. Alumina was 30 wt.% on average for all samples, good for producing high-purity alumina by hydrometallurgical processes. The results, however, showed high (~20 at.%) silica concentrations in two samples and ~3 wt.% Fe in one sample, which can pose a challenge in the Bayer process. The X-ray diffraction (XRD) analysis showed that gibbsite (Gbs), kaolinite (Kln), anatase (Ant), and hematite (Hem) were the major mineral phases in these samples. The study showed that the samples from the same mine vary in their metal content, especially with regard to Si, and they, thus, need to be processed selectively to maximize their economic value.

The solubilities of HCl-treated samples of corundum, gibbsite, boehmite, and diaspore in aqueous solutions at 298 K and one atmosphere pressure were determined from undersaturated and supersaturated initial conditions. Solution characteristics at apparent equilibrium were measured and used to calculate equilibrium constants (Kr) for mineral dissolution reactions:

$$\begin{array}{l} A{l_2}{O_3}\left( {corundum} \right) + 3{H^ + } = A{l^3} + 1.5\,{H_2}O,\\ Al{\left( {OH} \right)_3}\left( {gibbsite} \right) + 3{H^ + } = A{l^3} + 3\,{H_2}O,\\ and\\ AlOOH\left( {boehmite\,or\,diaspore} \right) + 3{H^ + } = A{l^3} + 2{H_2}O, \end{array}$$

The nature of organo-phosphate and carboxylate bonding in aqueous suspensions of noncrystalline alumina, boehmite, and gibbsite has been studied using the anionic nitroxide spin probes 3-carboxy-2,2,5,5-tetramethyl-1-pyrrolidinyloxyl and 4-hydroxy-2,2,6,6-tetramethyl-piperidinooxyl dihydrogen phosphate. Analysis of the electron spin resonance (ESR) spectra of these molecules revealed that adsorption of both molecules occurred rapidly on the high surface area alumina and boehmite, whereas only the organophosphate adsorbed on gibbsite. A loss in rotational motion of the molecules accompanied adsorption, with the greater degree of motional restriction observed for the carboxylate attributed to steric restrictions to rotation about the surface-bound C-COO− bond axis. The ease of displacement of adsorbed carboxylate from surface binding sites by weakly adsorbing anions (Cl−, ClO4−) compared to organophosphate suggests that the carboxylate adsorbed by ligand exchange of a single surface OH, whereas the organophosphate probably formed a bidentate bond. The carboxylate bound on noncrystalline alumina showed evidence of nonspecific electrostatic adsorption in addition to ligand exchange of surface OH. This weak bonding was indicated by a moderate loss in rotational motion and ease of exchangeability.

The ability of a high surface-area gibbsite to adsorb Cu2+ was studied using a Cu2+ ion-selective electrode, electron spin resonance, infrared spectroscopy, and electron microscopy. The gibbsite chemi-sorbed small amounts of monomelic Cu2+ (<0.5 mmole/100 g) which was oriented with its z-axis perpendicular to the (001) plane of the mineral. The proposed chemisorption sites are at gibbsite crystal “steps” observed by electron microscopy. Although Cu2+ adsorption on gibbsite as a function of pH was largely reversible, exposure of the chemisorbed Cu2+ to NH3 did not result in desorption from the surface despite the displacement of several OH− or H2O ligands by NH3. The results indicate that at least one Cu-O-Al bond is formed in the process of chemisorption.

At pH > 5, the gibbsite appeared to promote the hydrolysis and polymerization of Cu2+, with further adsorption at the surfaces. Infrared spectroscopy revealed no effect of the adsorption on the (001) surface hydroxyl groups, although the anisotropic diffusion of protons in the gibbsite structure was verified from deuteration studies.

Resilication of bauxite produced kaolin at and beneath an old erosion surface on bauxite at the Alabama Street Mine of ALCOA in Saline County, Arkansas. The transitional alteration can be traced in morphology by scanning electron microscopy, (SEM) and in Al:Si ratio by energy dispersive analysis. In one illustrated example, the sequence of resilication took place within 1 mm thickness; in another, across 80 mm. The first morphologic alteration of gibbsite (bauxite) appears to be to allophane that occurs in micrometer-size plates which show elongate cracking and/or straight to highly curved elongate edges. The next phase is kaolinite, first in micrometer-size flakes followed by coarser flakes that grade into a zone of typical stacked kaolinite, likewise identified by X-ray powder diffraction. Notably large stacks and small flakes of kaolinite are intimately mixed in the SEMs, thus suggesting that unequal sizes of kaolinite crystals can grow during one episode of an in-situ genesis.

The nature of Cu2+ adsorption by boehmite, gibbsite, and noncrystalline alumina was studied over a range of equilibrium pH (4.5–7.5) and Cu2+ concentration (10−3–10−8 M) by electron spin resonance (ESR). Available chemisorption sites at pH 4.5 were the most numerous for noncrystalline alumina (~1 mmole/100 g), less for boehmite, and least for gibbsite as indicated by the relative strength of the rigid-limit ESR signal attributed to Cu2+ adsorbed at discrete sites. The chemisorption process involved immobilization of Cu2+ by displacement of one or more H2O ligands by hydroxyl or surface oxygen ions, with the formation of at least one Cu-O-Al bond. As the pH was raised from 4.5 to 6.0, essentially all of the solution Cu2+ appeared to be adsorbed by the solids. However, the noncrystalline alumina and boehmite chemisorbed much of the total adsorbed Cu2+ (10 mmole/100 g), whereas precipitation or nucleation of Cu(OH)2 in the gibbsite system was indicated. Precipitated Cu2+ was more readily redissolved by exposure to NH3 vapor than chemisorbed Cu2+.

To interpret the erratic conditions, rates, and extent of gibbsite crystallization from partially neutralized A1C13 solution, the following hypothesis is proposed: The initial OH-A1 polymers in the freshly prepared solutions were probably unstable and transformed into either gibbsite or stable OH-A1 polymers via two different reaction paths. In the presence of nuclei, the OH-A1 polymers dissociated into monomeric ions, which then deposited onto nuclei to form gibbsite. In the absence of nuclei, the unstable polymers slowly converted to stable polymers. The erratic stability of OH-Al solutions and gibbsite crystallization are therefore attributed to the relative magnitudes of these two reaction paths which, in turn, are attributed to two key factors: (1) the distribution of unstable vs. stable OH-Al polymers; and (2) the presence or absence of nuclei. The duration of aging of the parent solution governed the distribution of unstable vs. stable polymers. The rate of neutralization resulted in varying localized high alkalinity in OH-Al solution preparation and thus varying development of nuclei.

Hornblende of the Carrol Knob mafic complex (southern Blue Ridge Mountains, North Carolina) has weathered under humid, temperate conditions. Hornblende weathering appears to have been a dissolution-reprecipitation reaction, in which hornblende dissolved stoichiometrically, and the ferruginous and aluminous weathering products (goethite, gibbsite, and kaolinite) precipitated from solution (neoformation). During the earliest stage of alteration, ferruginous weathering products formed as linings of fractures within and around crystals and cleavage fragments of hornblende. Side-by-side coalescence of lenticular etch pits during more advanced weathering produced characteristic “denticulated” terminations on hornblende remnants in dissolution cavities bounded by ferruginous boxworks. Dissolution cavities are devoid of weathering products. Small “pendants” of ferruginous material project from the boxwork into void spaces. Because these products are separated from the hornblende remnants by void space, they must have been produced by dissolution-reprecipitation reactions. Complete removal of the parent hornblende left a ferruginous microboxwork or “negative pseudomorph.” Only Al and Fe were conserved over microscopic distances; alkali and alkaline-earth elements were stoichiometrically removed from the weathering microenvironment during the weathering process.

The effects of humic acid (HA) on the crystallization of precipitation products of Al under mildly acidic to alkaline conditions were investigated. The extent of Al precipitation substantially decreased with increasing HA concentration (0 to 75 µg/ml) in the pH range 6 to 10 during the 80-day aging period. The X-ray powder diffraction (XRD) data show that, at pH 6.0, the amount of pseudoboehmite formed in the systems decreased with the increasing concentration of HA present. The proportion of Al hydroxide polymorphs (gibbsite and bayerite) was greatly influenced by the amounts of HA present in the systems. At pH 6.0 and HA concentration of 37.5 µg/ml, all the precipitation products of Al were noncrystalline. At pH 8.0 and a HA concentration of 12.5 µg/ml, the formation of gibbsite and bayerite was completely inhibited and only pseudoboehmite was evident in the XRD patterns. Further increase in HA concentration (25–75 µg/ml HA) at pH 8.0 resulted in no precipitation of Al, and only a broad peak at ∼3.3 Å, characteristic of HA, was observed. The XRD patterns of the precipitates of Al formed in the absence of HA at pH 10.0 showed the characteristic peaks of bayerite. At pH 10.0, the precipitation products of Al formed even at the HA concentration of 2.5 µg/ml yielded no XRD peaks. Infrared absorption spectra and transmission electron micrographs of the precipitation products of Al formed in the systems studied substantiate the findings obtained by XRD. The data obtained in this study indicate that HA affects the formation of Al hydroxide polymorphs, pseudoboehmites and short-range ordered mineral colloids.

Feldspars in granitic saprolite in southwestern Australia have altered to halloysite, kaolinite, and gibbsite with no evidence of noncrystalline material. The secondary minerals are commonly present as intimate mixtures within altered feldspar grains, but discrete zones of gibbsite or halloysite-kaolinite also are present. Variations in the chemical microenvironment within micrometer-size zones in grains apparently controlled the type and distribution of secondary minerals. The alteration of both plagioclase and alkali feldspars involved congruent dissolution by soil solution and crystallization of halloysite, kaolinite, and gibbsite from this solution. Highly altered feldspar grains consist of etched feldspar fragments embedded within a highly porous framework of subhedral to euhedral platy crystals of kaolinite and gibbsite, or of spherical and felted aggregates of halloysite.

The solubility of four different gibbsite preparations was measured, including two commercial hydrated aluminas produced by Alcoa, a Fisher ACS-grade Al(OH)3, and a laboratory preparation. The Alcoa samples and the laboratory-prepared sample had been studied previously by other investigators but without using a long-term acid treatment. Scanning electron microscopy showed globular surface material that was removed by a 14-day, 0.1 M HCl treatment. Solubility was determined at pH 4 from both over-and undersaturation with continuous agitation for 228 days. The acid treatment correlated with a decrease in log*Kso[*KSO = (Al3+)/(H+)3] of about 0.5 units. The mean solubility of the three acid-treated commercial gibbsite samples was log*Kso = 7.55 ± 0.055 (*Kso = 3.5 × 107). The solubility of the acid-treated laboratory preparation was log*Kso = 7.86 (*Kso = 7.2 × 107). The greater solubility of the laboratory-prepared gibbsite is attributed to a greater concentration of structural defects in the crystals.

The boiling 5-M-NaOH treatment was found to aid in the identification and characterization of goethite and hematite by effectively concentrating the two Fe oxides in kaolinitic-gibbsitic soil clays. No transformations of goethite to hematite or hematite to goethite were detected, but poorly crystalline, highly Al-substituted goethite was found to dissolve and recrystallize into a more well-crystalline, less Al-substituted goethite in samples low in Si. The Si released from kaolinite was sufficient to block goethite dissolution and recrystallization in kaolinitic samples, but noncrystalline silica had to be added to samples rich in gibbsite to minimize this effect.