Antenna arrays are a main driver of next generation millimeter-wave communication and radar systems as shrinking antenna sizes leverage larger arrays to compensate for reduced link budget. However, conventional phase controlled arrays exhibit a frequency dependent scan angle that appears as loss to a fixed counterpart. Bandwidth limitations introduced by the so-called beam squint effect hinder larger array sizes and data rates thereby generating a demand for timed arrays as a solution. This paper gives a quantified overview of the beam squint phenomenon, different hardware architectures as well as evaluation parameters and common shortcomings of true-time delay (TTD) elements. A broad variety of TTD realizations from literature are compared by their operational principles and performance. Finally, the delay interpolation principle, its non-idealities, and their impact on a hierarchically time delay controlled D-band antenna array are described. Extended content on a previously published, continuously tunable TTD implementation at a center frequency of 144 GHz with a bandwidth of 26 GHz and a delay range of 1.75 ps that requires only 0.53 × 0.3 mm2 of core chip area is presented. Measurement results have been obtained from a demonstrator manufactured in 130 nm BiCMOS technology.

We report on the successful implementation of a photonic-based beam steering approach for point-to-multipoint terahertz (THz) communications. The frequency-agile radiation properties of a THz leaky-wave antenna connected to a photodiode are utilized in the remote transmitter for generating multiple individually steerable THz beams. The approach benefits from the ultra-wide frequency tunability of optical heterodyne systems for frequency-agile THz beam steering. Moreover, the approach allows to exploit high performance and mature optical modulation techniques for generating THz beams with a high data capacity. In the THz receiver, a carrier frequency insensitive envelope THz detector based upon a single Schottky-barrier diode is used. In detail, THz communications in the 300 GHz band (WR3.4) with a maximum steering angle up to 90° is reported. Experimentally, for single steerable THz beam operation, a record high data rate of 35 Gbit/s at a wireless distance of 30 cm is achieved using two-level pulse amplitude modulation. Also, longer wireless distances up to 110 cm with 5 Gbit/s are demonstrated. Furthermore, point-to-multipoint THz communications is reported using two individually steerable THz beams carrying 10 Gbit/s and 5 Gbit/s over 70 cm and 50 cm, respectively.

This paper presents a two-dimensional (2D) metasurface antenna array composed of mushroom cells coupled by thin slots in the top metallization. The antenna is fed through power dividers designed in substrate-integrated waveguide technology. The antenna structure is therefore designed in a fully up-to-date integrated version. The array shows beam steering in the azimuthal plane controlled by signal amplitudes fed into particular ports at the edges of the matrix. The main advantage of this antenna is no need to use phase shifters applied in standard 2D antenna arrays. Two antenna versions have been designed, fabricated, and experimentally tested. The beam can be steered within 360° (90°) in azimuth. The steering of the beam in elevation from backward to forward directions within 40° is done by changing frequency from 21 up to 23.8 GHz. This interval is reduced to 30° by exciting the antenna simultaneously at two adjacent ports at the same amplitude.

A novel thinned antenna element distribution for cancelling grating lobes (GLs) as well as for reducing phase shifters (PSs) is presented for a two-dimensional phased-array automotive radar application. First, an efficient clustering technique of vertical adjacent elements is employed with array thinning for a PS reduction of 66.7%. In the proposed distribution, several single-element radiators (non-clustered antenna elements) are placed in the vertical direction with specific spacing in a grid of 16 × 12 (192) elements with λ/2 pitch. This disrupts the periodicity of phase-centers after element-clustering and takes a role as steerable GL canceller with capabilities of tracking and nullifying the GL at any scan angle. The proposed distribution enables beam steering up to ±60° in the azimuth plane, as well as ±25° in the elevation plane with cancelled GL and sidelobes. Furthermore, the proposed distribution has been efficiently calibrated with all elements activated by introducing the code division multiple access technique. To the best of the authors’ knowledge, this work represents the first fully calibrated state-of-the-art thinned distribution phased-array including a novel steerable GL canceller to track and nullify GLs.

This paper presents the application of a substrate-integrated waveguide (SIW) for the design of a leaky-wave antenna (LWA). The antenna radiates through a wide slot in the top wall of the SIW structure in the forward direction. The effective width of the slot is varied by changing capacitances of two arrays of varactors connected between slot edges and inserted conducting strips. The radiation pattern of the antenna is by this way controlled by DC bias, which sets the capacitances of varactors. The maximum radiation direction in elevation can be varied within 35° by changing the DC bias from 2 to 12 V. This elevation angle is measured from the broad side direction perpendicular to the antenna substrate. The measured antenna characteristics are in accord with those predicted by simulation. The antenna can be simply fabricated by a planar circuit board technology.

The purpose of this paper is the design of a novel single layer reflectarray antenna in X-band, which can electronically steer the antenna beam and change its polarization. Each antenna element includes a circular patch and rings around it, equipped with two varactor diodes, which are positioned perpendicular together to create a circular polarization. First, using these elements, a circular polarized active electromagnetic band-gap (EBG) reflector is implemented. Then, a special feed is placed in a proper distance with respect to EBG reflector and a circular polarized reflectarray antenna is designed, which has capability of switching electronically between right- and left-handed circular polarizations. An electronic active board is designed and fabricated to provide the biasing voltages, control signals, and indicators. The elements of the reflectarray are designed and arranged in such a way that the varactor diodes can be biased independently. Consequently, a 3D beam is created, which can steer up to ±40o. For evaluating the antenna performance, the radiation patterns and the axial ratio of the antenna are determined at the operational frequency of 11.4 GHz. It is illustrated that, increasing the steering angle in θ direction decreases the directivity and the gain of the reflectarray antenna.

In this work, a new reconfigurable discrete 1D beam-steering Fabry–Perot cavity antenna with enhanced radiation performance is presented. It consists of a probe-fed patch antenna printed on the ground plane and a reconfigurable metasurface acting as the upper partially reflective surface to realize beam steering. By utilizing 6 × 6 proposed reconfigurable unit cells on the superstrate, the beam-steering angle can be effectively enhanced from ±7° to ±17° with fewer active elements and a much simpler biasing network. The proposed antenna was fabricated to validate the feasibility. Good agreement between the simulated and measured results is achieved. Moreover, the measured realized gains are over 11 dBi with a gain variation from the boresight direction to the tilted direction <0.2 dBi.

Fifth generation (5G) is the current hot topic of the world's leading telecommunication companies. The compact designs of antennas made it possible for them to resonate at higher frequencies, thus to enable the devices to attain higher data rate as compared to 4G technology. Data rate of 5G technology for low mobility users is expected to be 50.0 Gbps and for high mobility users it is 5.0 Gbps. On the other hand, International telecommunication union's objective for 5G is 3 times more spectrally efficient thanlong-term evolution (LTE). The paper has carried out meticulous study over the impact of 5G antennas on the size of antenna, size/type of substrate, gain, efficiency, and isolation, etc. Also, different arrays andmultiple input multiple outputs (MIMOs) with patch antenna, magneto electric-dipole, microstrip grid array antenna, folded dipole, series-fed array, connected antenna array, MIMO are studied. The paper also includes the existing technology i.e 4G LTE and their isolation enhancement approaches. Many of the designs used the reflector plates to reduce the back lobe radiation problem in MIMO/array antennas to increase front-to-back ratio. The gain in 5G antennas can be increased by using balun, parasitic element as directors, multiple notch structures, three identical slot sub-arrays, etc. Mathematical equations of multi-element/port antennas are included to model the designed antennas. The beam steering is also included for the 5G technology in this paper.

Today's increase of functions, improvement of performances, and cost reductions required on an agile electronically scanned antenna, drive researchers to develop an innovative antennas’ concept in order to deal with the proposed challenge. In this context, this article describes and demonstrates an experimental prototype to show the reliability and efficiency of the electromagnetic band gap (EBG) matrix antenna theoretical aspect, for beam forming and beam steering applications. The originality of this work is the antenna itself which constitutes the subject of an accepted national and international patent. In fact, the proposed antenna is based on the equivalent radiating surface approach and used special EBG antennas called “pixels” to overcome some of the array approach defects. The antenna has demonstrated different electromagnetic behaviors, such as low mutual coupling, high gain preservation for high scanning angles values, etc.