3D printed orthomode transducer (OMT) integrated with a 3D printed lens antenna is presented in this work. The OMT integrated with the lens antenna covers the range of 54–80 GHz, the radiator can handle a fractional bandwidth of 38%. Fused filament fabrication printing process is used for the domed elliptical profile lens antenna and polyjet printing process is used for fabrication of the OMT. The simulated radiation efficiency of the antenna remains above 90% for the entire bandwidth and the structure shows a gain of above 16 dBi.

This paper presents a pattern reconfigurable antenna that accomplishes wideband and multibeam characteristics. The antenna design comprises a cross-slot radiator as the primary element and reconfigurable partially reflecting surface (PRS) layer placed above and below the cross-slot radiator. This configuration allows the antenna to adapt its radiation patterns effectively. The choice of the cross-slot radiator is based on its capability to offer wideband characteristics. The PRS layer consists of a precisely arranged array of 4×4 unit cells, incorporating PIN diodes into both the upper and lower PRS layers. The direction of radiation pattern can be changed by altering operating states of the PIN diodes on the PRS layer. The antenna operates in three distinct states, each exhibiting a unique radiation pattern. The antenna produces broadside, backward, and bidirectional radiation patterns. It demonstrates effective pattern reconfigurability across the frequency range of 3.10–3.86 GHz (21.71%), with a peak gain of 9.60 dBi. The simulated and measured results of the antenna are found to be in good agreement.

This article presents an innovative design for a low-profile, high-gain circularly polarized (CP) antenna using a single-layer metasurface (MTS). The proposed design incorporates an MTS layer, comprising a 4 × 4 array of hexagonal-shaped patches, printed on the top layer of the substrate. The bottom layer features a coplanar waveguide-fed slotted ground. Circular polarization and broadside radiation are achieved through the application of characteristic mode analysis (CMA). CMA is employed to simultaneously excite desired modes, aiming for wideband circular polarization and gain enhancement. Experimental results validate the effectiveness of the design, with compact dimensions of 0.67λ0 × 0.67λ0 × 0.04λ0. The measurements demonstrate an impressive impedance bandwidth of 84.3% within the 3.7–9.1 GHz. Additionally, a 3-dB axial ratio bandwidth of 18.6% is observed between 4.96 and 5.98 GHz and 3.74% between 8.38 and 8.7 GHz. The antenna exhibits excellent radiation pattern characteristics, featuring a maximum gain of 10.08 dBi at 7.1 GHz. The radiation pattern is symmetrical with broadside directionality, making the antenna well-suited for sensing applications.

The increasing demand for wireless communication has emphasized the need for multiband antennas. This study presents a novel design for a multiband antenna with reduced specific absorption rate (SAR), high gain, and improved front-to-back ratio (FBR) achieved through the integration with a 4 × 4 artificial magnetic conductor (AMC) surface. The proposed antenna covers a wide range of wireless frequency bands, including Industrial, Scientific, and Medical, Wireless Local Area Network, Worldwide Interoperability for Microwave Access, Wi-Fi 6E, and 7, with resonating frequencies at 2.4, 3.2, 5.5, 7.5, and 10 GHz. The AMC unit cell creates four zero-degree reflection phases with double negative properties at 2.5, 3.8, 5.5, and 7.5 GHz. The compact design measures 0.23λ0 × 0.296λ0 × 0.0128λ0 and placed 0.104λ0 above an AMC surface of size 0.512λ0 × 0.512λ0 × 0.1296λ0. This structure enhances the gain by up to 8.55dBi at 6.01 GHz. The proposed antenna has −10 dB impedance bandwidth for these corresponding frequencies viz 2.34–2.43 GHz (3.77%), 2.81–3.83 GHz (30.72%), 4.82–6.21 GHz (25.20%), 7–7.65 GHz (8.87%), and 8.06–10.31 GHz (24.5%). An overall average percentage reduction value of SAR taken at these frequencies has been found to be 96.11% with AMC structure. The antenna sample was successfully fabricated, and the experimental results have been found to match well with the simulation results. This integrated design offers a promising solution for wearable off-body communication devices.

A rectangular monopole antenna with an extended ground, excited by Coplanar Waveguide (CPW) and backed by a 6 × 6 array of fractal artificial magnetic conductor (AMC) unit cells, resonating at 5.8 GHz in Industrial, Scientific, and Medical (ISM) band, is presented in this manuscript. To attain the objective of proposing a compact and economical antenna solution for employment in wearable biomedical domain, a novel approach of utilizing both surfaces of the same dielectric for engraving antenna element as well as AMC array is adopted. It results in the elimination of layers of expensive substrate (RO3003) and of thick separator (foam) between antenna and AMC array. During measurement in open space, the proposed antenna system exhibited an impedance bandwidth of 570 MHz with a gain of 7.9 dBi. While a total realized gain of 7.5 dBi, amounting to a gain enhancement of about 3 dB as compared to that of monopole alone, is observed when the integrated antenna system is placed just over a three-layer rectangular human body equivalent model. Specific absorption rate values, as calculated at 5.8 GHz and averaged over 1 and 10 g of human tissue, are 0.0117 and 0.00244 W/kg, respectively. Obtained results strongly advocate the use of the proposed antenna system in smart wearable healthcare devices.

An innovative and simple method for attaining broadband frequency reconfigurable antenna structure is presented using low-cost materials and a compact design. The frequency reconfigurability is attained by the “OFF” and “ON” mechanisms of three PIN diodes. Many performance observations are carried out such as reflectance coefficient, bandwidth (BW), resonance frequency, electric field, feed position variation, and gain among different configurations. The suitability of the presented work for the different applications lies in the X frequency band. The resonating frequency for all switch OFF modes is achieved at 13.2 GHz and one switch ON mode at 10.7 GHz. The proposed design yields the frequency tunability behavior over the broadband of 2.5 GHz. The design yields the directivity of 5.58 dB, the minimum reflectance coefficient of −17.27 dB, and a total gain of 3.87 dB. This design offers an electric field of 46 558 v/m, a BW of 340 MHz, and a normalized directivity of 87° using low-cost substrates. The results of the presented design were also fabricated and related to simulated results. Performance observation of the proposed work with previously published research work is also included. The presented design provides the solution of the low-cost, compact, reconfigurable antennas, which can be used for next-generation communication systems.

This paper proposes a wide band and multiband frequency reconfigurable antenna that can operate in the UWB, GSM, GPS, 4G LTE, WLAN, and WiMAX bands. The antenna is made up of a trapezoidal-shaped monopole radiator, which was inspired by a rectangular monopole antenna. The ground plane is modified by embedding T and L-shaped slots to notch the desired operating frequency. The proposed antenna can switch to six different frequencies using RF PIN diodes, making it suitable for modern wireless applications. A multilayer frequency selective surface (FSS) reflector is presented to improve the gain of the proposed reconfigurable antenna. The low-profile design achieved a significant increase in gain while retaining the UWB antenna's excellent impedance bandwidth. Because of the use of the FSS reflector, the antenna's average peak gain has increased from 6 to 10.4 dBi. The proposed antenna has a wide switching capability, which validates its unique feasibility for high-speed multiple Internet of Things applications via a common embedded platform under various applications.

In this work, a low profile ultra-wideband (UWB) antenna is designed and investigated using a novel loop-based wideband artificial magnetic conductor (WB-AMC) for gain enhancement. Initially, a compact loop antenna is designed using stub loading and further optimized for the UWB range by applying curve ground methodology. The average gain of the proposed antenna without WB-AMC is 2.7 dBi. To enhance the gain of the entire UWB range, loop-based WB-AMC in [2 × 2] forms is integrated. WB-AMC is used as a ground plane beneath the antenna. To validate the performance, the UWB antenna and WB-AMC are fabricated and tested. The measured results confirm the entire UWB range. Proposed antenna provides a peak gain of 9.4 dBi and an average gain of 5.8 dBi. Vertical profile reduction of 50% is achieved compared to perfect electric conductor ground. The proposed UWB antenna is a potential candidate for UWB wireless applications due to its attractive features such as low profile, wide bandwidth coverage, omnidirectional pattern, constant high gain, and group delay.

In this paper, a metasurface (MS)-based multi-functional electromagnetic (EM) structure is proposed to realize its two different applications, namely absorption and radiation. The proposed structure is based on periodic arrays of disk-shaped metallic patches and split rings with four embedded lumped resistors. The metallic vias are inserted from top to bottom to connect the disk-shaped patches with a feeding network designed on the bottom layer where two p-i-n switches are embedded in the feeding network to alter the different functions of the proposed structure. For free space incident plan wave, the designed structure works as an absorber when the p-i-n switches are switched OFF. The absorber operates over a frequency band from 6.2 GHz to 8.2 GHz and unchanged over an incident angle from 0° to 30° for both TE and TM polarized incident waves. The same structure also works as a low scattering and high gain radiator when the p-i-n switches are turned ON and radiate within absorbing frequency band, i.e. from 7.5 to 8.0 GHz. The designed structure is fabricated and experimentally verified for EM absorption and radiation applications.

To solve the problems of low gain, narrow bandwidth, and poor radiation directivity of conventional ground penetrating radar antenna, this paper proposes an ultra-wideband and high-gain antipodal tapered slot antenna (ATSA) with planar metamaterial lens. As a constituent part of this lens, a new non-resonant metamaterial unit cell is introduced and analyzed by the full-wave simulation tool. The single-layer planar lens composed of the designed unit cells with different sizes is placed in the maximum radiation direction of the ATSA to greatly enhance its radiation capability. The proposed planar lens antenna has a wide impedance bandwidth of 107.4% (2.41–8 GHz) and −3 dB gain bandwidth of 54.5% (4–7 GHz), respectively. The gain increases averagely by 6.0 dB in the whole operating frequency band, and the peck gain reaches 15.4 dBi at 5.5 GHz. And its excellent performance shows a high application prospect in ground penetrating radar and microwave imaging system.

In this paper, a high gain wideband circularly polarized (CP) microstrip antenna is presented for broadband operation. The proposed structure comprised of a partially grounded printed monopole antenna loaded with a split ring resonator and a metallic reflector. By using the metallic reflector surface underneath the patch radiator results in the reflected waves in the same phase with main lobe radiation, thereby improving the gain and it also acts like a secondary radiator to generate wideband CP behavior in the proposed design. A gain enhancement of 4.3 dBi is achieved in the operating frequency band as compared with the design without a metallic reflector. The maximum gain achieved in the presented method is 8.6 dBic over the entire operating range. The proposed design shows a wideband behavior ranging from 4.30 to 9.10 GHz with the 10-dB impedance bandwidth of 71.64%. In addition, the proposed design yielded a broadside right hand CP radiation with a 3-dB axial ratio bandwidth of 33.88% from 4.98 to 7.01 GHz. The proposed antenna is fabricated and experimental results on reflection coefficient, gain, axial ratio, and radiation patterns concede well with simulation results.

A magnetic dipole quasi-Yagi antenna based on a dielectric resonator (DR) is proposed in this letter. The dominate TE1δ1 mode of the rectangular DR is used as a magnetic dipole which can be differentially fed by the coplanar strip line (CPS). Thanks to the DR employment, the proposed antenna has several advantages such as compact size and flexible design which means the 3-D dimensions of the DR can be easily adjusted to cater for various applications. Meanwhile, the gain of the proposed DR quasi-Yagi antenna is higher than that of traditional electric dipole counterparts. Furthermore, since the DR driver is horizontally polarized, both the metal strip and DR can be used as a director for enhancing the end-fire gain. To verify the design concept, a prototype operating at the X-band is fabricated and measured. Good agreement between the simulated and measured results can be observed.

Novel designs of a circularly polarized 2 × 2 and 4 × 4 slot array antennas (CPSAAs) are proposed. Sequential phase feed network composed of a section of 270° and four strips is utilized to feed the array structures. Array elements are simple linearly polarized wide slot antennas (WSAs) composed of simple radiating patches with truncation on four corners and slotted ground plane on substrate backside. Each WSA operates over the UWB frequency band of 3.1–10.6 GHz. When the WSAs are arranged in the form of 2 × 2 and 4 × 4 CPSAAs, frequency bands of 3–13.1 and 1.4–12.3 GHz are covered, respectively. More importantly, CP is generated at 4.5–8 and 4.6–8.8 GHz for 2 × 2 and 4 × 4 CPSAAs, respectively. This is while; the WSAs are linearly polarized elements. Higher gain values and wider bandwidths are obtained with respect to single WSA. Design process and performance analysis of the single and array antennas are discussed through the paper.

Wideband microstrip antenna with L-plate capacitively coupled feed structure is designed. The antenna operates in GSM 1800/1900 (1710–1910 MHz) and UMTS I (1920–2170 MHz) frequency bands. The antenna has dual slant (±45°) polarization with high isolation (>25 dB) between the ports. Measurements of the antenna reveal good performance in terms of impedance match, gain, gain flatness, isolation, half-power beamwidth, cross-polarization level, and front-to-back ratio. The proposed antenna can be used in base station antenna arrays, pico-cell, and femto-cell small-area cellular networks.