This paper is devoted to time domain numerical solutions of two-dimensional (2D) material interface problems governed by the transverse magnetic (TM) and transverse electric (TE) Maxwell's equations with discontinuous electromagnetic solutions. Due to the discontinuity in wave solutions across the interface, the usual numerical methods will converge slowly or even fail to converge. This calls for the development of advanced interface treatments for popular Maxwell solvers. We will investigate such interface treatments by considering two typical Maxwell solvers – one based on collocation formulation and another based on Galerkin formulation. To restore the accuracy reduction of the collocation finite-difference time-domain (FDTD) algorithm near an interface, the physical jump conditions relating discontinuous wave solutions on both sides of the interface must be rigorously enforced. For this purpose, a novel matched interface and boundary (MIB) scheme is proposed in this work, in which new jump conditions are derived so that the discontinuous and staggered features of electric and magnetic field components can be accommodated. The resulting MIB time-domain (MIBTD) scheme satisfies the jump conditions locally and suppresses the staircase approximation errors completely over the Yee lattices. In the discontinuous Galerkin time-domain (DGTD) algorithm – a popular GalerkinMaxwell solver, a proper numerical flux can be designed to accurately capture the jumps in the electromagnetic waves across the interface and automatically preserves the discontinuity in the explicit time integration. The DGTD solution to Maxwell interface problems is explored in this work, by considering a nodal based high order discontinuous Galerkin method. In benchmark TM and TE tests with analytical solutions, both MIBTD and DGTD schemes achieve the second order of accuracy in solving circular interfaces. In comparison, the numerical convergence of the MIBTD method is slightly more uniform, while the DGTD method is more flexible and robust.

In this paper, we study a new stabilized method based on the local pressure projection to solve the semi-linear elliptic equation. The proposed scheme combines nonconforming finite element pairs NCP1–P1 triangle element and two-level method, which has a number of attractive computational properties: parameter-free, avoiding higher-order derivatives or edge-based data structures, but have more favorable stability and less support sets. Stability analysis and error estimates have been done. Finally, numerical experiments to check estimates are presented.

This paper derives a higher order hybrid stress finite element method on quadrilateral meshes for linear plane elasticity problems. The method employs continuous piecewise bi-quadratic functions in local coordinates to approximate the displacement vector and a piecewise-independent 15-parameter mode to approximate the stress tensor. Error estimation shows that the method is free from Poisson-locking and has second-order accuracy in the energy norm. Numerical experiments confirm the theoretical results.

In this work, we develop an adaptive algorithm for solving elliptic optimal control problems with simultaneously appearing state and control constraints. The algorithm combines a Moreau-Yosida technique for handling state constraints with a semi-smooth Newton method for solving the optimality systems of the regularized sub-problems. The state and adjoint variables are discretized using continuous piecewise linear finite elements while a variational discretization concept is applied for the control. To perform the adaptive mesh refinements cycle we derive local error estimators which extend the goal-oriented error approach to our setting. The performance of the overall adaptive solver is assessed by numerical examples.

The control of convective heat transfer from a heated circular cylinder immersed in an electrically conducting fluid is achieved using an externally imposed magnetic field. A Higher Order Compact Scheme (HOCS) is used to solve the governing energy equation in cylindrical polar coordinates. The HOCS gives fourth order accurate results for the temperature field. The behavior of local Nusselt number, mean Nusselt number and temperature field due to variation in the aligned magnetic field is evaluated for the parameters 5≤Re≤40, 0≤N≤20 and 0.065≤Pr≤7. It is found that the convective heat transfer is suppressed by increasing the strength of the imposed magnetic field until a critical value of N, the interaction parameter, beyond which the heat transfer increases with further increase in N. The results are found to be in good agreement with recent experimental studies.

In this paper, we investigate the Galerkin spectral approximation for elliptic control problems with integral control and state constraints. Firstly, an a posteriori error estimator is established,which can be acted as the equivalent indicatorwith explicit expression. Secondly, appropriate base functions of the discrete spacesmake it is probable to solve the discrete system. Numerical test indicates the reliability and efficiency of the estimator, and shows the proposed method is competitive for this class of control problems. These discussions can certainly be extended to two- and three-dimensional cases.

Common silicate glasses are among the most brittle of the materials. However, on warming beyond the glass transition temperature Tg glass transforms into one of the most plastic known materials. Bulk metallic glasses exhibit similar phenomenology, indicating that it rests on the disordered structure instead on the nature of the chemical bonds. The micromechanics of a solid with bulk amorphous structure is examined in order to determine the most basic conditions the system must satisfy to be able of plastic flow. The equations for the macroscopic flow, consistent with the constrictions imposed at the atomic scale, prove that a randomly structured bulk material must be either a brittle solid or a liquid, but not a ductile solid. The theory permits to identify a single parameter determining the difference between the brittle solid and the liquid. However, the system is able of perfect ductility if the plastic flow proceeds in two dimensional plane layers that concentrate the strain. Insight is gained on the nature of the glass transition, and the phase occurring between glass transition and melting.

The linear operator plays an important role in the computational process of Homotopy Analysis Method (HAM). In HAM frame any kind of linear operator can be chosen to develop a solution. Hence, it is easy to introduce the modified/physical parameter dependent linear operators. The effective use of these operators has been judged through solving fluid flow problems. Modification in linear operators affects the solution and improves the computational efficiency of HAM for larger values of parameters. The convergence rate of the solution is rapid and several times higher resulting in lesser computational time.