The solution structure and stability of N-terminally truncated β2-microglobulin (ΔN6β2-m), the major modification in ex vivo fibrils, have been investigated by a variety of biophysical techniques. The results show that ΔN6β2-m has a free energy of stabilization that is reduced by 2.5 kcal/mol compared to the intact protein. Hydrogen exchange of a mixture of the truncated and full-length proteins at μM concentrations at pH 6.5 monitored by electrospray mass spectrometry reveals that ΔN6β2-m is significantly less protected than its wild-type counterpart. Analysis of ΔN6β2-m by NMR shows that this loss of protection occurs in β strands I, III, and part of II. At mM concentration gel filtration analysis shows that ΔN6β2-m forms a series of oligomers, including trimers and tetramers, and NMR analysis indicates that strand V is involved in intermolecular interactions that stabilize this association. The truncated species of β2-microglobulin was found to have a higher tendency to self-associate than the intact molecule, and unlike wild-type protein, is able to form amyloid fibrils at physiological pH. Limited proteolysis experiments and analysis by mass spectrometry support the conformational modifications identified by NMR and suggest that ΔN6β2-m could be a key intermediate of a proteolytic pathway of β2-microglobulin. Overall, the data suggest that removal of the six residues from the N-terminus of β2-microglobulin has a major effect on the stability of the overall fold. Part of the tertiary structure is preserved substantially by the disulfide bridge between Cys25 and Cys80, but the pairing between β-strands far removed from this constrain is greatly perturbed.

The solution structure and backbone dynamics of Cu(I) pseudoazurin, a 123 amino acid electron transfer protein from Paracoccus pantotrophus, have been determined using NMR methods. The structure was calculated to high precision, with a backbone RMS deviation for secondary structure elements of 0.35 ± 0.06 Å, using 1,498 distance and 55 torsion angle constraints. The protein has a double-wound Greek-key fold with two α-helices toward its C-terminus, similar to that of its oxidized counterpart determined by X-ray crystallography. Comparison of the Cu(I) solution structure with the X-ray structure of the Cu(II) protein shows only small differences in the positions of some of the secondary structure elements. Order parameters S2, measured for amide nitrogens, indicate that the backbone of the protein is rigid on the picosecond to nanosecond timescale.

The protease domain of coagulation factor VIIa (FVIIa) is homologous to trypsin with a similar active site architecture. The catalytic function of FVIIa is regulated by allosteric modulations induced by binding of divalent metal ions and the cofactor tissue factor (TF). To further elucidate the mechanisms behind these transformations, the effects of Zn2+ binding to FVIIa in the free form and in complex with TF were investigated. Equilibrium dialysis suggested that two Zn2+ bind with high affinity to FVIIa outside the N-terminal γ-carboxyglutamic acid (Gla) domain. Binding of Zn2+ to FVIIa, which was influenced by the presence of Ca2+, resulted in decreased amidolytic activity and slightly reduced affinity for TF. After binding to TF, FVIIa was less susceptible to zinc inhibition. Alanine substitutions for either of two histidine residues unique for FVIIa, His216, and His257, produced FVIIa variants with decreased sensitivity to Zn2+ inhibition. A search for putative Zn2+ binding sites in the crystal structure of the FVIIa protease domain was performed by Grid calculations. We identified a pair of Zn2+ binding sites in the Glu210–Glu220 Ca2+ binding loop adjacent to the so-called activation domain canonical to serine proteases. Based on our results, we propose a model that describes the conformational changes underlying the Zn2+-mediated allosteric down-regulation of FVIIa's activity.

Conformational transitions of human calcitonin (hCT) during fibril formation in the acidic and neutral conditions were investigated by high-resolution solid-state 13C NMR spectroscopy. In aqueous acetic acid solution (pH 3.3), a local α-helical form is present around Gly10, whereas a random coil form is dominant as viewed from Phe22, Ala26, and Ala31 in the monomer form on the basis of the 13C chemical shifts. On the other hand, a local β-sheet form as viewed from Gly10 and Phe22, and both β-sheet and random coil as viewed from Ala26 and Ala31 were detected in the fibril at pH 3.3. The results indicate that conformational transitions from α-helix to β-sheet, and from random coil to β-sheet forms occurred in the central and C-terminus regions, respectively, during the fibril formation. The increased 13C resonance intensities of fibrils after a certain delay time suggests that the fibrillation can be explained by a two-step reaction mechanism in which the first step is a homogeneous association to form a nucleus, and the second step is an autocatalytic heterogeneous fibrillation. In contrast to the fibril at pH 3.3, the fibril at pH 7.5 formed a local β-sheet conformation at the central region and exhibited a random coil at the C-terminus region. Not only a hydrophobic interaction among the amphiphilic α-helices, but also an electrostatic interaction between charged side chains can play an important role for the fibril formation at pH 7.5 and 3.3 acting as electrostatically favorable and unfavorable interactions, respectively. These results suggest that hCT fibrils are formed by stacking antiparallel β-sheets at pH 7.5 and a mixture of antiparallel and parallel β-sheets at pH 3.3.

The contribution of the Ser45 hydrogen bond to biotin binding activation and equilibrium thermodynamics was investigated by biophysical and X-ray crystallographic studies. The S45A mutant exhibits a 1,700-fold greater dissociation rate and 907-fold lower equilibrium affinity for biotin relative to wild-type streptavidin at 37 °C, indicating a crucial role in binding energetics. The crystal structure of the biotin-bound mutant reveals only small changes from the wild-type bound structure, and the remaining hydrogen bonds to biotin retain approximately the same lengths. No additional water molecules are observed to replace the missing hydroxyl, in contrast to the previously studied D128A mutant. The equilibrium ΔG°, ΔH°, ΔS°, ΔC°P, and activation ΔG[Dagger] of S45A at 37 °C are −13.7 ± 0.1 kcal/mol, −21.1 ± 0.5 kcal/mol, −23.7 ± 1.8 cal/mol K, −223 ± 12 cal/mol K, and 20.0 ± 2.5 kcal/mol, respectively. Eyring analysis of the large temperature dependence of the S45A off-rate resolves the ΔH[Dagger] and ΔS[Dagger] of dissociation, 25.8 ± 1.2 kcal/mol and 18.7 ± 4.3 cal/mol K. The large increases of ΔH[Dagger] and ΔS[Dagger] in the mutant, relative to wild-type, indicate that Ser45 could form a hydrogen bond with biotin in the wild-type dissociation transition state, enthalpically stabilizing it, and constraining the transition state entropically. The postulated existence of a Ser45-mediated hydrogen bond in the wild-type streptavidin transition state is consistent with potential of mean force simulations of the dissociation pathway and with molecular dynamics simulations of biotin pullout, where Ser45 is seen to form a hydrogen bond with the ureido oxygen as biotin slips past this residue after breaking the native hydrogen bonds.

An amino-terminal fragment of human apolipoprotein E3 (residues 1–165) has been expressed and crystallized in three different crystal forms under similar crystallization conditions. One crystal form has nearly identical cell dimensions to the previously reported orthorhombic (P212121) crystal form of the amino-terminal 22 kDa fragment of apolipoprotein E (residues 1–191). A second orthorhombic crystal form (P212121 with cell dimensions differing from the first form) and a trigonal (P3121) crystal form were also characterized. The structures of the first orthorhombic and the trigonal form were determined by seleno-methionine multiwavelength anomalous dispersion, and the structure of the second orthorhombic form was determined by molecular replacement using the structure from the trigonal form as a search model. A combination of modern experimental and computational techniques provided high-quality electron-density maps, which revealed new features of the apolipoprotein E structure, including an unambiguously traced loop connecting helices 2 and 3 in the four-helix bundle and a number of multiconformation side chains. The three crystal forms contain a common intermolecular, antiparallel packing arrangement. The electrostatic complimentarity observed in this antiparallel packing resembles the interaction of apolipoprotein E with the monoclonal antibody 2E8 and the low density lipoprotein receptor. Superposition of the model structures from all three crystal forms reveals flexibility and pronounced kinks in helices near one end of the four-helix bundle. This mobility at one end of the molecule provides new insights into the structural changes in apolipoprotein E that occur with lipid association.

Enhancement of methylesterase activity of the response regulator CheB is dependent upon phosphorylation of the N-terminal regulatory domain of the enzyme. This domain plays a dual role in the regulation of methylesterase activity with an inhibitory effect in the unphosphorylated state and a stimulatory effect in the phosphorylated state. Structural studies of the unphosphorylated state have indicated that the basis for the regulatory domain's inhibitory effect is partial blockage of access of substrate to the active site suggesting that the activation upon phosphorylation involves a repositioning of the two domains with respect to each other. We report in this study evidence for phosphorylation-dependent conformational changes in CheB. Differences in rates of proteolytic cleavage by trypsin between the phosphorylated and unphosphorylated states have been observed at three sites in the protein with one site, 113, within the regulatory domain and two sites, 134 and 148, lying within the interdomain linker. These results support the hypothesis for the mechanism for the activation of CheB wherein phosphorylation of a specific aspartate residue within the N-terminal domain results in a propagated conformational change within the regulatory domain leading to a repositioning of its two domains. Presumably, structural changes in the regulatory domain of CheB facilitate a repositioning of the N- and C-terminal domains, leading to stimulation of methylesterase activity.

Two high resolution crystal structures of Escherichia coli alkaline phosphatase (AP) in the presence of phosphonate inhibitors are reported. The phosphonate compounds, phosphonoacetic acid (PAA) and mercaptomethylphosphonic acid (MMP), bind competitively to AP with dissociation constants of 5.5 and 0.6 mM, respectively. The structures of the complexes of AP with PAA and MMP were refined at high resolution to crystallographic R-values of 19.0 and 17.5%, respectively. Refinement of the AP-inhibitor complexes was carried out using X-PLOR. The final round of refinement was done using SHELXL-97. Crystallographic analyses of the inhibitor complexes reveal different binding modes for the two phosphonate compounds. The significant difference in binding constants can be attributed to these alternative binding modes observed in the high resolution X-ray structures. The phosphinyl group of PAA coordinates to the active site zinc ions in a manner similar to the competitive inhibitor and product inorganic phosphate. In contrast, MMP binds with its phosphonate moiety directed toward solvent. Both enzyme-inhibitor complexes exhibit close contacts, one of which has the chemical and geometrical potential to be considered an unconventional hydrogen bond of the type C-H···X.

Using a combination of theoretical sequence structure recognition predictions and experimental disulfide bond assignments, a three-dimensional (3D) model of human interleukin-7 (hIL-7) was constructed that predicts atypical surface chemistry in helix D that is important for receptor activation. A 3D model of hIL-7 was built using the X-ray crystal structure of interleukin-4 (IL-4) as a template (Walter MR et al., 1992, J Mol Biol. 224:1075–1085; Walter MR et al., 1992, J Biol Chem 267:20371–20376). Core secondary structures were constructed from sequences of hIL-7 predicted to form helices. The model was constructed by superimposing IL-7 helices onto the IL-4 template and connecting them together in an up–up down–down topology. The model was finished by incorporating the disulfide bond assignments (Cys3, Cys142), (Cys35, Cys130), and (Cys48, Cys93), which were determined by MALDI mass spectroscopy and site-directed mutagenesis (Cosenza L, Sweeney E, Murphy JR, 1997, J Biol Chem 272:32995–33000). Quality analysis of the hIL-7 model identified poor structural features in the carboxyl terminus that, when further studied using hydrophobic moment analysis, detected an atypical structural property in helix D, which contains Cys130 and Cys142. This analysis demonstrated that helix D had a hydrophobic surface exposed to bulk solvent that accounted for the poor quality of the model, but was suggestive of a region in IL-7 that maybe important for protein interactions. Alanine (Ala) substitution scanning mutagenesis was performed to test if the predicted atypical surface chemistry of helix D in the hIL-7 model is important for receptor activation. This analysis resulted in the construction, purification, and characterization of four hIL-7 variants, hIL-7(K121A), hIL-7(L136A), hIL-7(K140A), and hIL-7(W143A), that displayed reduced or abrogated ability to stimulate a murine IL-7 dependent pre-B cell proliferation. The mutant hIL-7(W143A), which is biologically inactive and displaces [125I]-hIL-7, is the first reported IL-7R system antagonist.

The heat of binding the serine protease, porcine pancreatic elastase, by the inhibitor, turkey ovomucoid third domain, is dependent on the presence of inorganic phosphate. This dependence is saturable and can be accurately modeled as the phosphate binding to a single site on the protease–inhibitor complex; thus, the elastase–ovomucoid system provides a unique opportunity to study phosphate–protein interactions. We have used isothermal titration calorimetry to investigate this binding, thereby providing one of the few complete thermodynamic characterizations of phosphate interacting with proteins. The binding is characterized by a small favorable ΔG°, a large unfavorable ΔH°, and a positive ΔCp, thermodynamics consistent with the release of water being linked to phosphate binding. These measurements provide insight into the binding of phosphotyrosine containing peptides to SH2 domains by suggesting the energetic consequences of binding phosphate free from other interactions.

The native form of inhibitory serpins (serine protease inhibitors) is not in the thermodynamically most stable state but in a metastable state, which is critical to inhibitory functions. To understand structural basis and functional roles of the native metastability of inhibitory serpins, we have been characterizing stabilizing mutations of human α1-antitrypsin, a prototype inhibitory serpin. One of the sites that has been shown to be critical in stability and inhibitory activity of α1-antitrypsin is Lys335. In the present study, detailed roles of this lysine were analyzed by assessing the effects of 13 different amino acid substitutions. Results suggest that size and architect of the side chains at the 335 site determine the metastability of α1-antitrypsin. Moreover, factors such as polarity and flexibility of the side chain at this site, in addition to the metastability, seem to be critical for the inhibitory activity. Substitutions of the lysine at equivalent positions in two other inhibitory serpins, human α1-antichymotrypsin and human antithrombin III, also increased stability and decreased inhibitory activity toward α-chymotrypsin and thrombin, respectively. These results and characteristics of lysine side chain, such as flexibility, polarity, and the energetic cost upon burial, suggest that this lysine is one of the structural designs in regulating metastability and function of inhibitory serpins in general.

Helical coiled-coils and bundles are some of the most common structural motifs found in proteins. Design and synthesis of α-helical motifs may provide interesting scaffolds that can be useful as host structures to display functional sites, thus allowing the engineering of novel functional miniproteins. We have synthesized a 38-amino acid peptide, α2p8, encompassing the α-helical hairpin present in the structure of p8MTCP1, as an α-helical scaffold particularly promising for its stability and permissiveness of sequence mutations. The three-dimensional structure of this peptide has been solved using homonuclear two-dimensional NMR techniques at 600 MHz. After sequence specific assignment, a total of 285 distance and 29 dihedral restraints were collected. The solution structure of α2p8 is presented as a set of 30 DIANA structures, further refined by restrained molecular dynamics, using simulated annealing protocol with the AMBER force field. The RMSD values for the backbone and all heavy atoms are 0.65 ± 0.25 and 1.51 ± 0.21 Å, respectively. Excised from its protein context, the α-hairpin keeps its native structure: an α-helical coiled-coil, similar to that found in superhelical structures, with two helices spanning residues 4–16 and 25–36, and linked by a short loop. This motif is stabilized by two interhelical disulfide bridges and several hydrophobic interactions at the helix interface, leaving most of its solvent-exposed surface available for mutation. This α-helical hairpin, easily amenable to synthetic chemistry and biological expression system, may represent a stable and versatile scaffold to display new functional sites and peptide libraries.

One alternative method for drug delivery involves the use of siderophore-antibiotic conjugates. These compounds represent a specific means by which potent antimicrobial agents, covalently linked to iron-chelating siderophores, can be actively transported across the outer membrane of Gram-negative bacteria. These “Trojan Horse” antibiotics may prove useful as an efficient means to combat multi-drug–resistant bacterial infections. Here we present the crystallographic structures of the natural siderophore-antibiotic conjugate albomycin and the siderophore phenylferricrocin, in complex with the active outer membrane transporter FhuA from Escherichia coli. To our knowledge, this represents the first structure of an antibiotic bound to its cognate transporter. Albomycins are broad-host range antibiotics that consist of a hydroxamate-type iron-chelating siderophore, and an antibiotically active, thioribosyl pyrimidine moiety. As observed with other hydroxamate-type siderophores, the three-dimensional structure of albomycin reveals an identical coordination geometry surrounding the ferric iron atom. Unexpectedly, this antibiotic assumes two conformational isomers in the binding site of FhuA, an extended and a compact form. The structural information derived from this study provides novel insights into the diverse array of antibiotic moieties that can be linked to the distal portion of iron-chelating siderophores and offers a structural platform for the rational design of hydroxamate-type siderophore-antibiotic conjugates.

Calmodulin (CaM), the ubiquitous, eukaryotic, bilobal calcium-binding regulatory protein, has been cleaved by thrombin to create two fragments, TM1 (1–106) and TM2 (107–148). NMR and CD results indicate that TM1 and TM2 can associate in the presence of Ca2+ to form a complex similar to native CaM, even though the cleavage site is not in the linker region between two helix-loop-helix domains, but rather within an α-helix. Cadmium-113 NMR results show that this complex has enhanced metal-ion binding properties when compared to either TM1 or TM2 alone. This complex can bind several CaM-binding target peptides, as shown by gel bandshift assays, circular dichroism spectra, and 13C NMR spectra of biosynthetically methyl-13C-Met-labeled TM1 and TM2; moreover, gel bandshift assays show that the addition of a target peptide strengthens the interactions between TM1 and TM2 and increases the stability of the complex. Cadmium-113 NMR spectra indicate that the TM1:TM2 complex can also bind the antipsychotic drug trifluoperazine. However, in contrast to CaM:peptide complexes, the TM1:TM2:peptide complexes are disrupted by 4 M urea; moreover, TM1 and TM2 in combination are unable to activate CaM-dependent enzymes. This suggests that TM1:TM2 mixtures cannot bind target molecules as tightly as intact CaM, or perhaps that binding occurs but additional interactions with the target enzymes that are necessary for proper activation are perturbed by the proteolytic cleavage. The results presented here reflect the importance of the existence of helix-loop-helix Ca2+-binding domains in pairs in proteins such as CaM, and extend the understanding of the association of such domains in this class of proteins in general.

The three-dimensional structure of the 56 residue polypeptide Apis mellifera chymotrypsin/cathepsin G inhibitor 1 (AMCI-1) isolated from honey bee hemolymph was calculated based on 730 experimental NMR restraints. It consists of two approximately perpendicular β-sheets, several turns, and a long exposed loop that includes the protease binding site. The lack of extensive secondary structure features or hydrophobic core is compensated by the presence of five disulfide bridges that stabilize both the protein scaffold and the binding loop segment. A detailed analysis of the protease binding loop conformation reveals that it is similar to those found in other canonical serine protease inhibitors. The AMCI-1 structure exhibits a common fold with a novel family of inhibitors from the intestinal parasitic worm Ascaris suum. The pH-induced conformational changes in the binding loop region observed in the Ascaris inhibitor ATI are absent in AMCI-1. Similar binding site sequences and structures strongly suggest that the lack of the conformational change can be attributed to a Glu → Gln substitution at the P1′ position in AMCI-1, compared to ATI. Analysis of amide proton temperature coefficients shows very good correlation with the presence of hydrogen bond donors in the calculated AMCI-1 structure.

Sequence analysis of Candida rugosa lipase 1 (LIP1) predicts the presence of three N-linked glycosylation sites at asparagine 291, 314, 351. To investigate the relevance of sugar chains in the activation and stabilization of LIP1, we directed site mutagenesis to replace the above mentioned asparagine with glutamine residues. Comparison of the activity of mutants with that of the wild-type (wt) lipase indicates that both 314 and 351 Asn to Gln substitutions influence, although at a different extent, the enzyme activity both in hydrolysis and esterification reactions, but they do not alter the enzyme water activity profiles in organic solvents or temperature stability. Introduction of Gln to replace Asn351 is likely to disrupt a stabilizing interaction between the sugar chain and residues of the inner side of the lid in the enzyme active conformation. The effect of deglycosylation at position 314 is more difficult to explain and might suggest a more general role of the sugar moiety for the structural stability of lipase 1. Conversely, Asn291Gln substitution does not affect the lipolytic or the esterase activity of the mutant that behaves essentially as the wt enzyme. This observation supports the hypothesis that changes in activity of Asn314Gln and Asn351Gln mutants are specifically due to deglycosylation.

The nucleotide sequence of the gene ( pepA) of a zymogen of an aspartic proteinase from Penicillium janthinellum with a 71% identity in the deduced amino acid sequence to penicillopepsin (which we propose to call penicillopepsin-JT1) has been determined. The gene consists of 60 codons for a putative leader sequence of 20 amino acid residues, a sequence of about 150 nucleotides that probably codes for an activation peptide and a sequence with two introns that codes for the active aspartic proteinase. This gene, inserted into the expression vector pGPT-pyrG1, was expressed in an aspartic proteinase-free strain of Aspergillus niger var. awamori in high yield as a glycosylated form of the active enzyme that we call penicillopepsin-JT2. After removal of the carbohydrate component with endoglycosidase H, its relative molecular mass is between 33,700 and 34,000. Its kinetic properties, especially the rate-enhancing effects of the presence of alanine residues in positions P3 and P′2 of substrates, are similar to those of penicillopepsin-JT1, endothiapepsin, rhizopuspepsin, and pig pepsin. Earlier findings suggested that this rate-enhancing effect was due to a hydrogen bond between the -NH- of P3 and the hydrogen bond accepting oxygen of the side chain of the fourth amino acid residue C-terminal to Asp215. Thr219 of penicillopepsin-JT2 was mutated to Ser, Val, Gly, and Ala. Thr219Ser showed an increase in kcat when a P3 residue was present in the substrate, which was similar to that of the wild-type, whereas the mutants Thr219Val, Thr219Gly, and Thr219Ala showed no significant increase when a P3 residue was added. The results show that the putative hydrogen bond alone is responsible for the increase. We propose that by locking the -NH- of P3 to the enzyme, the scissile peptide bond between P1 and P′1 becomes distorted toward a tetrahedral conformation and becomes more susceptible to nucleophilic attack by the catalytic apparatus without the need of a conformational change in the enzyme.

Lyme borreliosis is a multisystem disorder caused by the spirochete Borrelia burgdorferi that is transmitted to humans by the tick Ixodes dammini. The immune response against the 31 kDa OspA, which is one of the most abundant B. burgdorferi proteins, appears to be critical in preventing infection and tissue inflammation. Detailed knowledge of the immunological and molecular characteristics of the OspA protein is important for the development of reliable diagnostic assays. In this study, we characterized a new conformational epitope present within the middle part of B. burgdorferi OspA. Our approach used enzymatic proteolyses of the immune complex followed by mass spectrometric identification of the peptides bound to the antibody. It appears to be one of the first reports on the characterization of a discontinuous epitope using mass spectrometry.

A series of designed short helical peptides was used to study the effect of nonpolar interactions on conformational specificity. The consensus sequence was designed to obtain short helices (17 residues) and to minimize the presence of interhelical polar interactions. Furthermore, the sequence contained a heptad repeat (abcdefg), where positions a and d were occupied by hydrophobic residues Leu, Ile, or Val, and positions e and g were occupied by Ala. The peptides were named according to the identities of the residues in the adeg positions, respectively. The peptides llaa, liaa, ilaa, iiaa, ivaa, viaa, lvaa, vlaa, and vvaa were synthesized, and their characterization revealed marked differences in specificity. An experimental methodology was developed to study the nine peptides and their pairwise mixtures. These peptides and their mixtures formed a vast array of structural states, which may be classified as follows: helical tetramers and pentamers, soluble and insoluble helical aggregates, insoluble unstructured aggregates, and soluble unstructured monomers. The peptide liaa formed stable helical pentamers, and iiaa and vlaa formed stable helical tetramers. Disulfide cross-linking experiments indicated the presence of an antiparallel helix alignment in the helical pentamers and tetramers. Rates of amide proton exchange of the tetrameric form of vlaa were 10-fold slower than the calculated exchange rate for unfolded vlaa. In other work, the control of specificity has been attributed to polar interactions, especially buried polar interactions; this work demonstrated that subtle changes in the configuration of nonpolar interactions resulted in a large variation in the extent of conformational specificity of assemblies of designed short helical peptides. Thus, nonpolar interactions can have a significant effect on the conformational specificity of oligomeric short helices.

Nitrile hydratase from Rhodococcus sp. N-771 is an αβ heterodimer with a nonheme ferric iron in the catalytic center. In the catalytic center, αCys112 and αCys114 are modified to a cysteine sulfinic acid (Cys-SO2H) and a cysteine sulfenic acid (Cys-SOH), respectively. To understand the function and the biogenic mechanism of these modified residues, we reconstituted the nitrile hydratase from recombinant unmodified subunits. The αβ complex reconstituted under argon exhibited no activity. However, it gradually gained the enzymatic activity through aerobic incubation. ESI-LC/MS analysis showed that the anaerobically reconstituted αβ complex did not have the modification of αCys112-SO2H and aerobic incubation induced the modification. The activity of the reconstituted αβ complex correlated with the amount of αCys112-SO2H. Furthermore, ESI-LC/MS analyses of the tryptic digest of the reconstituted complex, removed of ferric iron at low pH and carboxamidomethylated without reduction, suggested that αCys114 is modified to Cys-SOH together with the sulfinic acid modification of αCys112. These results suggest that αCys112 and αCys114 are spontaneously oxidized to Cys-SO2H and Cys-SOH, respectively, and αCys112-SO2H is responsible for the catalytic activity solely or in combination with αCys114-SOH.