This paper presents a study of the impact of prior structure on paradoxical results in multidimensional item response theory. Paradoxical results refer to the possibility that an incorrect response could be beneficial to an examinee. We demonstrate that when three or more ability dimensions are being used, paradoxical results can be induced by using priors in which all abilities are positively correlated where they would not occur if the abilities were modeled as being independent. In the case of separable tests, we demonstrate the mathematical causes of paradoxical results, develop a computationally feasible means to check whether they can occur in any given test, and demonstrate a class of prior covariance matrices that can be guaranteed to avoid them.

Measures of agreement are used in a wide range of behavioral, biomedical, psychosocial, and health-care related research to assess reliability of diagnostic test, psychometric properties of instrument, fidelity of psychosocial intervention, and accuracy of proxy outcome. The concordance correlation coefficient (CCC) is a popular measure of agreement for continuous outcomes. In modern-day applications, data are often clustered, making inference difficult to perform using existing methods. In addition, as longitudinal study designs become increasingly popular, missing data have become a serious issue, and the lack of methods to systematically address this problem has hampered the progress of research in the aforementioned fields. In this paper, we develop a novel approach to tackle the complexities involved in addressing missing data and other related issues for performing CCC analysis within a longitudinal data setting. The approach is illustrated with both real and simulated data.

In this paper we propose an upward correction to the standard error (SE) estimation of \documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$\hat{\theta}_{\mathrm{ML}}$\end{document}, the maximum likelihood (ML) estimate of the latent trait in item response theory (IRT). More specifically, the upward correction is provided for the SE of \documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$\hat{\theta}_{\mathrm{ML}}$\end{document} when item parameter estimates obtained from an independent pretest sample are used in IRT scoring. When item parameter estimates are employed, the resulting latent trait estimate is called pseudo maximum likelihood (PML) estimate. Traditionally, the SE of \documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$\hat{\theta}_{\mathrm{ML}}$\end{document} is obtained on the basis of test information only, as if the item parameters are known. The upward correction takes into account the error that is carried over from the estimation of item parameters, in addition to the error in latent trait recovery itself. Our simulation study shows that both types of SE estimates are very good when θ is in the middle range of the latent trait distribution, but the upward-corrected SEs are more accurate than the traditional ones when θ takes more extreme values.

A new class of parametric models that generalize the multivariate probit model and the errors-in-variables model is developed to model and analyze ordinal data. A general model structure is assumed to accommodate the information that is obtained via surrogate variables. A hybrid Gibbs sampler is developed to estimate the model parameters. To obtain a rapidly converged algorithm, the parameter expansion technique is applied to the correlation structure of the multivariate probit models. The proposed model and method of analysis are demonstrated with real data examples and simulation studies.

This paper is concerned with supplementing statistical tests for the Rasch model so that additionally to the probability of the error of the first kind (Type I probability) the probability of the error of the second kind (Type II probability) can be controlled at a predetermined level by basing the test on the appropriate number of observations. An approach to determining a practically meaningful extent of model deviation is proposed, and the approximate distribution of the Wald test is derived under the extent of model deviation of interest.

“Improper linear models” (see Dawes, Am. Psychol. 34:571–582, 1979), such as equal weighting, have garnered interest as alternatives to standard regression models. We analyze the general circumstances under which these models perform well by recasting a class of “improper” linear models as “proper” statistical models with a single predictor. We derive the upper bound on the mean squared error of this estimator and demonstrate that it has less variance than ordinary least squares estimates. We examine common choices of the weighting vector used in the literature, e.g., single variable heuristics and equal weighting, and illustrate their performance in various test cases.

Three plausible assumptions of conditional independence in a hierarchical model for responses and response times on test items are identified. For each of the assumptions, a Lagrange multiplier test of the null hypothesis of conditional independence against a parametric alternative is derived. The tests have closed-form statistics that are easy to calculate from the standard estimates of the person parameters in the model. In addition, simple closed-form estimators of the parameters under the alternatives of conditional dependence are presented, which can be used to explore model modification. The tests were applied to a data set from a large-scale computerized exam and showed excellent power to detect even minor violations of conditional independence.

Rasch models are characterised by sufficient statistics for all parameters. In the Rasch unidimensional model for two ordered categories, the parameterisation of the person and item is symmetrical and it is readily established that the total scores of a person and item are sufficient statistics for their respective parameters. In contrast, in the unidimensional polytomous Rasch model for more than two ordered categories, the parameterisation is not symmetrical. Specifically, each item has a vector of item parameters, one for each category, and each person only one person parameter. In addition, different items can have different numbers of categories and, therefore, different numbers of parameters. The sufficient statistic for the parameters of an item is itself a vector. In estimating the person parameters in presently available software, these sufficient statistics are not used to condition out the item parameters. This paper derives a conditional, pairwise, pseudo-likelihood and constructs estimates of the parameters of any number of persons which are independent of all item parameters and of the maximum scores of all items. It also shows that these estimates are consistent. Although Rasch’s original work began with equating tests using test scores, and not with items of a test, the polytomous Rasch model has not been applied in this way. Operationally, this is because the current approaches, in which item parameters are estimated first, cannot handle test data where there may be many scores with zero frequencies. A small simulation study shows that, when using the estimation equations derived in this paper, such a property of the data is no impediment to the application of the model at the level of tests. This opens up the possibility of using the polytomous Rasch model directly in equating test scores.

Item calibration is an essential issue in modern item response theory based psychological or educational testing. Due to the popularity of computerized adaptive testing, methods to efficiently calibrate new items have become more important than that in the time when paper and pencil test administration is the norm. There are many calibration processes being proposed and discussed from both theoretical and practical perspectives. Among them, the online calibration may be one of the most cost effective processes. In this paper, under a variable length computerized adaptive testing scenario, we integrate the methods of adaptive design, sequential estimation, and measurement error models to solve online item calibration problems. The proposed sequential estimate of item parameters is shown to be strongly consistent and asymptotically normally distributed with a prechosen accuracy. Numerical results show that the proposed method is very promising in terms of both estimation accuracy and efficiency. The results of using calibrated items to estimate the latent trait levels are also reported.

We demonstrate the use of a multidimensional extension of the latent Markov model to analyse data from studies with repeated binary responses in developmental psychology. In particular, we consider an experiment based on a battery of tests which was administered to pre-school children, at three time periods, in order to measure their inhibitory control (IC) and attentional flexibility (AF) abilities. Our model represents these abilities by two latent traits which are associated to each state of a latent Markov chain. The conditional distribution of the test outcomes given the latent process depends on these abilities through a multidimensional one-parameter or two-parameter logistic parameterisation. We outline an EM algorithm for likelihood inference on the model parameters; we also focus on likelihood ratio testing of hypotheses on the dimensionality of the model and on the transition matrices of the latent process. Through the approach based on the proposed model, we find evidence that supports that IC and AF can be conceptualised as distinct constructs. Furthermore, we outline developmental aspects of participants’ performance on these abilities based on inspection of the estimated transition matrices.

In this paper, we develop a new curvilinear equating for the nonequivalent groups with anchor test (NEAT) design under the assumption of the classical test theory model, that we name curvilinear Levine observed score equating. In fact, by applying both the kernel equating framework and the mean preserving linear transformation of post-stratification equating, we obtain a family of observed score equipercentile equating functions, which also includes the classical Levine observed score linear equating and the Tucker linear equating as special cases.

The Non-Equivalent groups with Anchor Test (NEAT) design involves missingdata that are missing by design. Three nonlinear observed score equating methods used with a NEAT design are the frequency estimation equipercentile equating (FEEE), the chain equipercentile equating (CEE), and the item-response-theory observed-score-equating (IRT OSE). These three methods each make different assumptions about the missing data in the NEAT design. The FEEE method assumes that the conditional distribution of the test score given the anchor test score is the same in the two examinee groups. The CEE method assumes that the equipercentile functions equating the test score to the anchor test score are the same in the two examinee groups. The IRT OSE method assumes that the IRT model employed fits the data adequately, and the items in the tests and the anchor test do not exhibit differential item functioning across the two examinee groups. This paper first describes the missing data assumptions of the three equating methods. Then it describes how the missing data in the NEAT design can be filled in a manner that is coherent with the assumptions made by each of these equating methods. Implications on equating are also discussed.

Identifying price sensitive consumers is an important problem in marketing. We develop a Bayesian multi-level factor analytic model of the covariation among household-level price sensitivities across product categories that are substitutes. Based on a multivariate probit model of category incidence, this framework also allows the researcher to model overall price sensitivity (i.e., indicated by higher-order factor scores) as a function of household-level covariates. All model parameters are estimated simultaneously to circumvent the downward bias resulting from two-stage estimation. The modeling framework is illustrated using scanner panel data from multiple categories of instant coffee.

Facial electromyography (EMG) is a useful physiological measure for detecting subtle affective changes in real time. A time series of EMG data contains bursts of electrical activity that increase in magnitude when the pertinent facial muscles are activated. Whereas previous methods for detecting EMG activation are often based on deterministic or externally imposed thresholds, we used regime-switching models to probabilistically classify each individual’s time series into latent “regimes” characterized by similar error variance and dynamic patterns. We also allowed the association between EMG signals and self-reported affect ratings to vary between regimes and found that the relationship between these two markers did in fact vary over time. The potential utility of using regime-switching models to detect activation patterns in EMG data and to summarize the temporal characteristics of EMG activities is discussed.

This paper presents a simple rescaling of the odds ratio that transforms the association measure into the weighted kappa statistic for a 2 × 2 table.

This paper investigates the precision of parameters estimated from local samples of time dependent functions. We find that time delay embedding, i.e., structuring data prior to analysis by constructing a data matrix of overlapping samples, increases the precision of parameter estimates and in turn statistical power compared to standard independent rows of panel data. We show that the reason for this effect is that the sign of estimation bias depends on the position of a misplaced data point if there is no a priori knowledge about initial conditions of the time dependent function. Hence, we reason that the advantage of time delayed embedding is likely to hold true for a wide variety of functions. We support these conclusions both by mathematical analysis and two simulations.

The paper presents inequalities between four descriptive statistics that can be expressed in the form [P − E(P)]/[1 − E(P)], where P is the observed proportion of agreement of a k × k table with identical categories, and E(P) is a function of the marginal probabilities. Scott’s π is an upper bound of Goodman and Kruskal’s λ and a lower bound of both Bennett et al. S and Cohen’s κ. We introduce a concept for the marginal probabilities of the k×k table called weak marginal symmetry. Using the rearrangement inequality, it is shown that Bennett et al. S is an upper bound of Cohen’s κ if the k×k table is weakly marginal symmetric.

A comprehensive analysis of difficulty for multiple-choice items requires information at different levels: the test, the items, and the alternatives. This paper introduces a new parameterization of the nominal categories model (NCM) for analyzing difficulty at these three levels. The new parameterization is referred to as the NE–NCM and is statistically equivalent to the NCM. The NE–NCM is applied to a sample of responses from a logical analysis test. The results suggest that the individuals execute a self-terminated response process that is mostly determined by working memory load.