Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-29T00:36:34.340Z Has data issue: false hasContentIssue false

In situ structural analysis of BPDA-PPD polyimide thin film using two-dimensional grazing incidence X-ray diffraction

Published online by Cambridge University Press:  29 February 2012

J. Kikuma*
Affiliation:
Analysis and Simulation Center, Asahi-KASEI Corporation, Shizuoka, Japan
T. Nayuki
Affiliation:
Analysis and Simulation Center, Asahi-KASEI Corporation, Shizuoka, Japan
T. Ishikawa
Affiliation:
Analysis and Simulation Center, Asahi-KASEI Corporation, Shizuoka, Japan
S. Matsuno
Affiliation:
Analysis and Simulation Center, Asahi-KASEI Corporation, Shizuoka, Japan
G. Asano
Affiliation:
Marketing Center, FPC/FPD Materials, Asahi-KASEI Corporation, Shizuoka, Japan
*
a)Author to whom correspondence should be addressed. Electronic mail: [email protected]

Abstract

Structural development of BPDA-PPD polyimide thin film has been investigated by in situ grazing incidence X-ray diffraction at the BL24XU beamline of the SPring-8. Optimizing the sample shape, two-dimensional images were measured successfully without sacrificing angle resolution. It has been clearly shown that the crystallization first begins in the in-plane direction, at the curing temperature of 180 °C, in which the periodic structure of the molecular chain axis (c axis) is developed. The crystallization in the surface normal (out-of-plane) direction is observed later, at the curing temperature above 300 °C. A slight increase of the d spacing of the c axis during heating process has been observed, suggesting the stretching of the contracted molecular chain in accordance with the curing process. In the cooling process, the decrease of the d spacings for a and b axes was considerable, which indicates thermal expansion of the crystals at high temperatures. The increases in the peak intensities during the cooling process have been observed, which indicate the d spacing of each axis becomes close to the equilibrium value to produce higher periodicity.

Type
X-Ray Diffraction
Copyright
Copyright © Cambridge University Press 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Kodjamanova, P., Fietzek, H., Juez-Lorenzo, M., Kolarik, V., and Hattendorf, H. (2006). “In situ study of real structure effects on the initial oxidation of FeCrAl alloys by two-dimensional high temperature x-ray diffraction,” Mater. Sci. Forum MSFOEP 522–523, 6976.CrossRefGoogle Scholar
Ree, M., Woo, S. H., Shin, T. J., Kim, K., Chang, H., Zin, W. C., Lee, K.-B., and Park, Y. J. (1997a). “Structure evolution and properties in a rigid polyimide prepared from its flexible poly(amic acid) precursor,” Macromol. Symp. MSYMEC 118, 213220.CrossRefGoogle Scholar
Ree, M., Kim, K., Woo, S. H., and Chang, H. (1997b). “Structure, chain orientation, and properties in thin films of aromatic polyimides with various chain rigidities,” J. Appl. Phys. JAPIAU 10.1063/1.364210 81, 698708.CrossRefGoogle Scholar
Sasaki, S., Masunaga, H., Tajiri, H., Inoue, K., Okuda, H., Noma, H., Honda, K., Takahara, A., and Tanaka, M. (2007). “In situ investigation of annealing effect on lamellar stacking structure of polyethylene thin films by synchrotron grazing-incidence small-angle and wide-angle x-ray scattering,” J. Appl. Crystallogr. JACGAR 40, s642s644.CrossRefGoogle Scholar
Shin, T. J., Lee, B., Youn, H. S., Lee, K.-B., and Ree, M. (2001). “Time-resolved synchrotron x-ray diffraction and infrared spectroscopic studies of imidization and structural evolution in a microscaled film of PMDA-3,4’-ODA poly(amic acid),” Langmuir LANGD5 17, 78427850.CrossRefGoogle Scholar
Takagi, Y. and Kimura, M. (1998). “Generalized grazing-incidence-angle x-ray diffraction (G-GIXD) using image plates,” J. Synchrotron Radiat. JSYRES 10.1107/S090904959800123X 5, 488490.CrossRefGoogle ScholarPubMed