Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-28T09:51:46.425Z Has data issue: false hasContentIssue false
  • English
  • Français

Simple Electrode-Barrier Structure Using Ir for Integration of PZT-Based High-Density Nonvolatile Memories

Published online by Cambridge University Press:  10 February 2011

Kwang B. Lee ,
S. Tirumala ,
Y. Song ,
Sang O. Ryu  and
Seshu B. Desu
Kwang B. Lee
Affiliation:
Department of Materials Science and Engineering, Virginia Tech, Blacksburg, VA 24061-0237
S. Tirumala
Affiliation:
Department of Materials Science and Engineering, Virginia Tech, Blacksburg, VA 24061-0237
Y. Song
Affiliation:
Department of Materials Science and Engineering, Virginia Tech, Blacksburg, VA 24061-0237
Sang O. Ryu
Affiliation:
Department of Materials Science and Engineering, Virginia Tech, Blacksburg, VA 24061-0237
Seshu B. Desu
Affiliation:
Department of Materials Science and Engineering, Virginia Tech, Blacksburg, VA 24061-0237
Get access

Abstract

We have investigated the electrode-barrier properties of Ir for PZT-based nonvolatile memories. Ir layer was rf-sputtered onto a poly-Si coated Si wafer. PZT thin films were deposited on Ir/poly-Si/SiO2/Si by means of sol-gel spin coating. Highly c-axis oriented perovskite PZT thin films were obtained, which might be due to the interface-controlled growth. We found that Ir in itself acted as an oxygen barrier, which was confirmed from the measurement of P-E hysteresis loops with the electrical contact between top-electrode and bottom-poly-Si. Remanent polarization and coercive field of 1rO2/PZT/Ir/poly-Si capacitor were 20 μC/cm2and 30 kV/cm, respectively and the capacitor showed negligible polarization fatigue up to 1011 switching repetitions. However, the leakage current density at the field of larger than 80 kV/cm was high, which was believed to be related to the unknown phase in PZT caused by the reaction of PbO with bottom-Ir. Such high leakage current behavior could be successively improved by the insertion of vacuum-annealed IrOx buffer layer between PZT/Ir. The electrical properties of IrOx/PZT/annealed-IrO2Ir/poly-Si capacitors are also discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 541: Symposium O – Ferroelectric Thin Films VII , 1998 , 197
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Nakamura, T., Nakao, Y., Kamisawa, A. and Takasu, H., Appl. Phys. Lett. 65, p. 1,522 (1994).Google Scholar
2. Al-Shareef, H. N., Auciello, O. and Kingon, A. I., J. Appl. Phys. 77, p. 2146 (1995).Google Scholar
3. Bhatt, H. D., Desu, S. B., Vijay, D. P., Hwang, Y. S., Zhang, X., Nakata, M., and Grill, A., Appl. Phys. Lett. 71, p. 719 (1997).Google Scholar
4. Song, Y., Zhu, Y., and Desu, S. B., Appl. Phys. Lett. 72, p. 2,686 (1998).Google Scholar
5. Shimizu, M., Fujisawa, H., Hyodo, S., Nakashima, S., Niu, H., Okino, H. and Shiosaki, T. in Ferroelectric Thin Films IV, edited by Treece, R. E., Jones, R. E., Foster, C. M., Desu, S. B. and Yoo, I. K. (Mater. Res. Soc. Proc. 493, Boston, MA 1997), p. 159–164.Google Scholar