Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-24T23:46:06.659Z Has data issue: false hasContentIssue false
  • English
  • Français

Photoelectrochemical Properties of Alkali-treated Sodium Titanate Nanorods

Published online by Cambridge University Press:  30 April 2015

Mingu Kim ,
Gwanghyo Choi ,
Daeheung Yoo  and
Kwangmin Lee
Mingu Kim
Affiliation:
Materials science and Engineering, Chonnam National University, Gwangju, Korea (The Republic of)
Gwanghyo Choi
Affiliation:
Materials science and Engineering, Chonnam National University, Gwangju, Korea (The Republic of)
Daeheung Yoo
Affiliation:
Materials science and Engineering, Chonnam National University, Gwangju, Korea (The Republic of)
Kwangmin Lee
Affiliation:
Materials science and Engineering, Chonnam National University, Gwangju, Korea (The Republic of)
Get access

Abstract

The band gap energy of the TiO2 photocatalytic is high at 3.2 eV. Ultraviolet (UV) light irradiation (<388nm) is required for the photocatalytic application. The lowering the band gap energy of TiO2 and enlarging light absorbing area are effective ways to enhance the efficiency of photocatalytic activity. Furthermore, the morphology and crystal structure of nanosized TiO2 considerably influences its photocatalytic behavior.

In this study, sodium titanate nanorods were formed using an alkali-treatment and were heat treated at different temperatures. The photoelectrochemical properties of sodium titanate nanorods was measured as a function of heat treatment temperature. The nanorods were prepared on the surface of Ti disk with a diameter of 15mm and a thickness of 3mm. Ti disk was immersed in 5 M NaOH aqueous solution at a temperature of 60 °C for 24 h. Morphology of sodium titanate nanorods was observed using FE-SEM. Crystal structure of sodium titanate nanorods was analyzed using X-ray diffractometer. Photoluminescence (PL) and electrochemical impedance spectroscopy (EIS) was used to evaluate photoelectrochemical properties of sodium titanate nanorods. The thin amorphous sodium titanate layer was formed during alkali-treatment. The sodium titanate layer was changed to nanorods after heat treatment at a temperature of 700 °C. The thickness and length of sodium titanate nanorods obtained at 700 °C were around 100 nm and 1μm, respectively. The crystal structure of sodium titanate was identified with Na2Ti6O13. Above 900 °C, the morphology of nanorods changed to agglomerated shape and the thickness of nanorods increased to 1 μm. The lowest value of PL was obtained at a temperature of 700 °C, while nonalkali treated specimen showed the highest value of PL. EIS revealed that polarization resistance at interface between sodium titanate nanorods and electrolyte was increased with increasing heat treatment temperature.

Keywords

Timicrostructureoptical
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1784: Symposium R – Photoactive Nanoparticles and Nanostructures , 2015 , mrss15-2135548
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Nakata, K., Fujishima, A., Journal of Photochemistry and Photobiology C: Photochemistry Reviews. 13, 169 (2012).CrossRefGoogle Scholar
Hoffmann, M.R., Martin, S.T., Choi, W., Bahnemann, D.W., Chemical reviews. 95, 69 (1995).CrossRefGoogle Scholar
Fujishima, A., Zhang, X., Tryk, D., Surface Science Reports. 63, 515 (2008).CrossRefGoogle Scholar
Fujishima, A., Hashimoto, K., Watanabe, T., TiO2 photocatalysis: fundamentals and applications, BKC Incorporated, 1999.Google Scholar
Gratzel, M., Nature. 414, 338 (2001).CrossRefGoogle Scholar
Choi, W., Journal of the Korean Industrial and Engineering Chemistry. 14, 1011 (2003).Google Scholar
Zhang, Y., Xiong, X., Han, Y., Zhang, X., Shen, F., Deng, S., Xiao, H., Yang, X., Yang, G., Peng, H., Chemosphere. 88, 145 (2012).CrossRefGoogle Scholar
Teh, C.M., Mohamed, A.R., Journal of Alloys and Compounds. 509, 1648 (2011).CrossRefGoogle Scholar
Robert, D., Catalysis Today. 122, 20 (2007).CrossRefGoogle Scholar
Carp, O., Huisman, C.L., Reller, A., Progress in solid state chemistry. 32, 33 (2004).CrossRefGoogle Scholar
Karakitsou, K.E., Verykios, X.E., The Journal of Physical Chemistry. 97, 1184 (1993).CrossRefGoogle Scholar
Zhu, J., Deng, Z., Chen, F., Zhang, J., Chen, H., Anpo, M., Huang, J., Zhang, L., Applied Catalysis B: Environmental. 62, 329 (2006).CrossRefGoogle Scholar