Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-28T09:48:31.085Z Has data issue: false hasContentIssue false
  • English
  • Français

Vitrification of high molybdenum feeds in the presence of reprocessing waste liquor

Published online by Cambridge University Press:  28 February 2013

Rick Short ,
Barbara Dunnett ,
Nick Gribble ,
Hannah Steel  and
Carl James Steele
Rick Short
Affiliation:
National Nuclear Laboratory, Sellafield, Seascale, Cumbria, UK, CA20 1PG
Barbara Dunnett
Affiliation:
National Nuclear Laboratory, Sellafield, Seascale, Cumbria, UK, CA20 1PG
Nick Gribble
Affiliation:
National Nuclear Laboratory, Sellafield, Seascale, Cumbria, UK, CA20 1PG
Hannah Steel
Affiliation:
Sellafield Ltd, Sellafield, Seascale, Cumbria, UK, CA20 1PG
Carl James Steele
Affiliation:
Sellafield Ltd, Sellafield, Seascale, Cumbria, UK, CA20 1PG
Get access

Abstract

At Sellafield, the Post Operational Clean Out (POCO) of solids from the base of the highly active waste storage tanks, in preparation for decommissioning, will result in a high molybdenum stream which will be vitrified using the current Waste Vitrification Plant (WVP). In order to minimise the number of containers required for POCO, the high molybdenum feed could be co-vitrified by addition to reprocessing waste, using the borosilicate glass formulation currently utilised on WVP. Co-vitrification of high molybdenum feeds has been carried out using non-active simulants, both in the laboratory and on the Vitrification Test Rig (VTR) which is a full scale working replica of a WVP processing line.

In addition, a new borosilicate glass formulation containing calcium has been developed by NNL which allows a higher incorporation of molybdenum through the formation of a durable CaMoO4 phase, after the solubility limit of molybdenum in the glass has been reached. Vitrification of the high molybdenum feed in the presence of varying quantities of reprocessing waste liquor using the new glass formulation has been carried out in the laboratory. Up to ∼10 wt% MoO3 could be incorporated without any detrimental phase separation in the product glass, but increasing the fraction of reprocessing waste was found to decrease the MoO3 incorporation. Soxhlet and static powder leach tests have been performed to assess the durability of the glass products. This paper discusses the results of the vitrification of high molybdenum feeds in the presence of reprocessing liquor in both the borosilicate glass formulation currently utilised on WVP and the modified formulation which contain calcium.

Keywords

Monuclear materialssecond phases
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1518: Symposium LL – Scientific Basis for Nuclear Waste Management XXXVI , 2012 , pp. 21 - 39
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Lutze, W. and Ewing, R., Radioactive Wasteforms for the Future, (North Holland, Amsterdam), 1988 Google Scholar
Schiewer, E., Rabe, H., Weisenburger, S., Mater. Res. Soc. Symp. Proc. Vol. 11, pp. 289–297 CrossRefGoogle Scholar
Pegg, I. L., Gan, H., Matlack, K. S., Endo, Y., Fukui, T., Ohashi, A., Joseph, I. and Bowan, B. W., Mitigation of Yellow Phase Formation at the Rokkasho HLW Vitrification Facility, Waste Management Symposium WM-2010 Conference, March 7-11, 2010, Phoenix, AZ Google Scholar
Magrabi, C., Smith, W., Larkin, M. J., Radioactive Waste Management and the Nuclear Fuel Cycles, 19(1-3), (Ed Grover, J. R., 1987) pp. 85–106 Google Scholar
Dunnett, B. F., Gribble, N. R., Short, R., Turner, E., Steele, C. J & Riley, A. D., Glass Technol.: Eur.. J. Glass Sci. Technol. A, 53(4), pp. 166–171 Google Scholar
Bradshaw, K., Gribble, N., Mayhew, P., Talford, M., Riley, A., Full scale non-radioactive vitrification development in support of UK highly-active waste vitrification”, Waste Management Symposium WM ’06 Conference, Feb 26-Mar 2, 2006, Tuscon, AZ Google Scholar
ASTM C1285–02: Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) Google Scholar
Scales, C R, NNL report 10929 Issue 6, Characterisation of simulated vitrified Magnox Product manufactured on the VTR, 2011 Google Scholar