Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-28T20:20:19.027Z Has data issue: false hasContentIssue false

Single-Walled Carbon Nanotube Growth with Narrow Diameter Distribution from Pt Catalysts by Alcohol Gas Source Method

Published online by Cambridge University Press:  05 February 2014

Hiroki Kondo
Affiliation:
Department of Materials Science and Engineering, Meijo University, Nagoya 468-8502, Japan
Ranajit Ghosh
Affiliation:
Department of Applied Chemistry, Meijo University, Nagoya 468-8502, Japan CSIR-Central Mechanical Engineering Research Institute, Durgapur-713209, West Bengal, India
Shigeya Naritsuka
Affiliation:
Department of Materials Science and Engineering, Meijo University, Nagoya 468-8502, Japan
Takahiro Maruyama
Affiliation:
Department of Materials Science and Engineering, Meijo University, Nagoya 468-8502, Japan Department of Applied Chemistry, Meijo University, Nagoya 468-8502, Japan
Sumio Iijima
Affiliation:
Faculty of Science and Technology, Meijo University, Nagoya 468-8502, Japan Nanotube Research Center, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565
Get access

Abstract

Single-walled carbon nanotube (SWCNT) growth were carried out on SiO2/Si substrates using Pt catalysts at different temperatures, from 400°C to 700°C, under various ethanol pressures by an alcohol gas source method, a type of cold-wall chemical vapor deposition (CVD). Raman measurements showed that the optimal ethanol pressure decreased as the growth temperature was reduced, and that SWCNTs grew even at 400°C by optimizing the ethanol pressure to 1×10-5 Pa in a high vacuum system. Compared to the SWCNTs grown from Co catalysts, the diameters of SWCNTs grown from Pt were smaller, irrespective of the growth temperature. In addition, both the SWCNT diameter and the distribution became narrower by reducing the growth temperature and we obtained small-diameter SWCNTs of which the diameters were less than 1 nm using Pt catalysts.

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Iijima, S., Nature 354, 56 (1991).CrossRefGoogle Scholar
Tanioku, K., Maruyama, T. and Naritsuka, S., Diamond Relat. Mater. 17, 589 (2008).CrossRefGoogle Scholar
Maruyama, T., Mizutani, Y., Naritsuka, S. and Iijima, S., Mater. Express 1, 267 (2011).CrossRefGoogle Scholar
Mizutani, Y., Fukuoka, N., Naritsuka, S., Maruyama, T. and Iijima, S., Diamond Relat. Mater. 26 (2012) 78.CrossRefGoogle Scholar
Jorio, A., Saito, R., Hafner, J. H., Liever, C. M., Hunter, M., McClure, T., Dresselhaus, G. and Dresselhaus, M. S., Phys. Rev. Lett. 86, 1118 (2001).CrossRefGoogle Scholar
Picher, M., Anglaret, E., Arenal, R. and Journain, V., ACS Nano 5, 2118 (2011).CrossRefGoogle Scholar
Ding, J. W., Yan, X. H. and Cao, J. X., Phys. Rev. B 66, 073401 (2002).CrossRefGoogle Scholar