Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-28T18:41:04.109Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing Sm-Fe(Ta)-N hard magnetic materials

Published online by Cambridge University Press:  21 February 2011

K Žužek ,
PJ Mcguiness  and
S Kobe
K Žužek
Affiliation:
Institute Jožef Stefan, Ljubljana, Slovenia
PJ Mcguiness
Affiliation:
Institute Jožef Stefan, Ljubljana, Slovenia, [email protected]
S Kobe
Affiliation:
Institute Jožef Stefan, Ljubljana, Slovenia, [email protected]
Get access

Abstract

SmFe based alloys interstitially modified with nitrogen are potential candidates for high energy permanent magnets. In order to obtain the optimum properties a thorough understanding of the starting material and processing parameters is required. The microstructures of two cast alloys of composition Sm13.8Fe82.2 Ta4.0 and Sm13.7 Fe86.3 were carefully examined with a SEM equipped with EDX and the exact stoichiometries of the phases were determined. The SmFeTa material was found to contain significant amounts of TaFe2as well as the Sm2Fe17, SmFe2, SmFe3 phases observed in the SmFe material but without the a-iron dendrites which are characteristic of the latter material. The optimum conditions necessary to provide the highest coercivities using the conventional HDDR process, and for the HDDR process combined with pre-milling were investigated. The coercivities obtained after using the HDDR process and subsequent nitriding were 680 kA/m for the SmFeTaN and 360 kA/m for the SmFeN samples. Significantly higher coercivites of 1000 kA/m for SmFeN and 1275 kA/m for SmFeTaN were achieved by reducing the particle size with milling prior to the HDDR process.The better coercivities obtained with the Ta containing sample were found to be due to the presence of a much smaller amount of a. The milling prior to the HDDR treatment improves the magnetic properties because of the small particle size which prevents the grains growing too large, with their consequent very negative effect on the coercivity.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 577: Symposium H – Advanced Hard and Soft Magnetic Materials , 1999 , 63
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Coey, JMD and Sun, H, J. Magn. Magn. Mater., 87 (1991) L251 Google Scholar
2. Schnitzke, K, Schultz, L, Wecker, J and Katter, M, Appl. Phys. Lett., 57 (1990) 2853 Google Scholar
3. Endoh, M, Iwata, M and Tokunaga, M, J. Appl. Phys., 70 (1991) 6030 Google Scholar
4. Katter, M, Wecker, J and Schultz, L, J. Appl. Phys., 70 (1991) 3188 Google Scholar
5. Christodoulou, C N and Takeshita, T, J. Alloys & Comp., 196 (1993) 161 Google Scholar
6. Huang, MQ, Zhang, LY, Ma, BM, Zbeng, Y, Elbicki, JM, Wallace, WE and Sankar, SG, J. Appl. Phys., 70 (1991) 6027 Google Scholar
7. Takeshita, T and Nakayama, R, Proc. 11th Int. W'shop on RE Magnets & their Appl. (1991) 49 Google Scholar
8. McGuiness, PJ, Zhang, XJ, Forsyth, H and Harris, IR, J. Less-Common Met., 162 (1990) 379 Google Scholar
9. Sinan, SA, Edgely, DS, Harris, IR, J. Alloys. Comp. 226(1995)170 Google Scholar
10. Platts, AE, Harris, IR and Coey, JMD, J. Alloys. Comp. 185(1992)251 Google Scholar
11. Saje, B, Platts, AE, Besenicar, S Kobe, Harris, IR and Kolar, D, IEEE Trans. Magn. 30(1994)690 Google Scholar
12. Gebel, B, Kubis, M and Muller, K-H, J. Magn. Magn. Mat. 174(1997)L1–L4Google Scholar
13. MUller, K-H, Cao, L, Dempsey, NM and Wendhausen, PAP, J. Appl. Phys. 79(8)(1996)5045 Google Scholar
14. Gebel, B, Kubis, M and MUller, K-H, J. Magn. Magn. Mater. 174(1997)L1–L4Google Scholar
15. Žužek, K, McGuiness, PJ and Kobe, S, accepted by J. Alloys & CompoundsGoogle Scholar
16. Zhang, XJ, Yin, XJ, McGuiness, PJ and Harris, IR, J. Mat. Proc. Tech., 48(1995) 461 Google Scholar
17. Zhao, X, Zhang, Z, Lei, W, Xiao, Q and Sun, XK, J. Magn. Magn. Mater., 148(1995)419 Google Scholar