Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-12-01T00:01:16.019Z Has data issue: false hasContentIssue false

Nylon 6 reinforced with acrylic polymer nanoparticles. Thermal properties and nano structure

Published online by Cambridge University Press:  11 March 2011

Estefania Huitron-Rattinger
Affiliation:
Departamento de Ingeniería Química Metalúrgica, Facultad de Química, Universidad Nacional Autónoma de México, 04510 México D.F., MEXICO. Instituto de Ciencias Físicas, Universidad Nacional Autónoma de México, Cuernavaca Mor. 62210, MEXICO.
Bonifacio Alvarado-Tenorio
Affiliation:
Departamento de Ingeniería Química Metalúrgica, Facultad de Química, Universidad Nacional Autónoma de México, 04510 México D.F., MEXICO. Instituto de Ciencias Físicas, Universidad Nacional Autónoma de México, Cuernavaca Mor. 62210, MEXICO.
Angel Romo-Uribe*
Affiliation:
Instituto de Ciencias Físicas, Universidad Nacional Autónoma de México, Cuernavaca Mor. 62210, MEXICO.
*
*To whom all correspondence should be addressed: [email protected]
Get access

Abstract

The correlation of thermal properties and nanostructure of nylon 6 (denoted PA6) reinforced with polymer nanoparticles (denoted PNP, size~8 nm) has been investigated. PNPs are highly crosslinked acrylic-based polymers synthesized by the Rohm and Haas Co. PNPs and those grafted with maleic anhydride (denoted PNP-g-MA) were each one dispersed into a commercial PA 6 matrix by melt extrusion, at a concentration of 3 wt%. Thermal analysis showed that the PNPs increased the thermal stability of PA6 and reduced the melting and crystallization temperatures as well as the enthalpy. Small-angle light scattering showed that the PNPs crystallize into a spherulitic morphology, typical of PA6. Isothermal crystallization studies showed that the PNPs act as nucleating agents, accelerating the rate of crystallization. Wide-angle X-ray scattering showed that the composites crystallize in the α-form, and the PNPs reduced the degree of crystallinity, in agreement with thermal analysis results. The smaller degree of crystallinity was also reflected in the long range spacing, it was also reduced by the presence of the PNPs as measured directly by small-angle X-ray scattering.

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Okada, A., Kawasumi, M., Kurauchi, T. and Kamigaito, O., Polym Prep 28, 447 (1987).Google Scholar
2. Biswas, M. and Sinha, S., Adv. Polym. Sci. 155, 167 (2001).Google Scholar
3. Vaia, R.A., Ishii, H. and Giannelis, E.P., Chem. Mater. 5, 1694 (1993).Google Scholar
4. Giannelis, E.P., Adv Mater 8, 29 (1996).Google Scholar
5. Huitron-Rattinger, E., Romero-Guzman, M.E. and Romo-Uribe, A., ACS PMSE 103, 166 (2010).Google Scholar
6. Katoh, Y. and Okamoto, M., Polymer 50, 4718 (2009).Google Scholar
7. Valerio-Cardenas, C., Romo-Uribe, A. and Cruz-Silva, R., Polym Eng Sci. 51, 254 (2011).Google Scholar
8. Lin, Y., Zhong, W., Shen, L., Xu, P. and Du, Q., J. Macromol. Sci., Phys. B44, 161 (2005).Google Scholar
9. Stein, R.S., Newer Methods of Polymer Characterization, (Interscience Publishers, New York 1964) p. 155.Google Scholar
10. Alexander, L., X-ray Diffraction Methods in Polymer Science, (John Wiley and Sons, London 1969)Google Scholar