Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-08T05:11:15.467Z Has data issue: false hasContentIssue false

Estimating Model Parameter Values for Total System Performance Assessment

Published online by Cambridge University Press:  10 February 2011

William L. Ebert
Affiliation:
CMT Division, Argonne National Laboratory, Argonne, IL 60439, [email protected]
Vladislav N. Zyryanov
Affiliation:
CMT Division, Argonne National Laboratory, Argonne, IL 60439
James C. Cunnane
Affiliation:
CMT Division, Argonne National Laboratory, Argonne, IL 60439
Get access

Abstract

The intrinsic dissolution rates of nine borosilicate waste glasses were extracted from the results of MCC- I tests conducted for durations long enough that the solution pH reached a nearly constant value but short enough that the buildup of dissolved species did not affect the dissolution rate. The effects of the pH and temperature on the measured rates were deconvoluted to determine the sensitivity of the rate to the glass composition. The intrinsic dissolution rates were similar for all of these glasses and were not correlated with the glass composition. The mean and standard deviation of the intrinsic dissolution rates of these glasses are log {ko/[g/(m2•d)]} = 8.2 ± 0.2.

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Total System Performance Assessment - Viability Assessment (TSPA-VA) Analyses Technical Basis Document: Waste Form Degradation,” Chapter 6, Radionuclide Mobilization Preliminary, and Transport Through the Engineered Barrier System. Civilian Radioactive Waste Management System report B00000000-01717-4301-00004 REV 01, Las Vegas, Nevada, 1998.Google Scholar
2 Knauss, K. G., Bourcier, W. L., McKeegan, K. D., Merzbacher, C. I., Nguyen, S. N., Ryerson, F. J., Smith, D. K., and Weed, H. C., in Scientific Basis for Nuclear Waste Management XIV, edited by Oversby, V.M. and Brown, P.W. (Mater. Res. Soc. Proc., 176, Pittsburgh, PA, 1990) pp. 371-381.Google Scholar
3 Advocat, T., Crovisier, J. L., Vernaz, E., Ehret, G., and Charpentier, H., in Scientific Basis for Nuclear Waste Management XIV, edited by Abrajano, T. Jr., and Johnson, L.H. (Mater. Res. Soc. Proc., 212, Pittsburgh, PA, 1991) pp. 5764.Google Scholar
4 McGrail, B. P., Ebert, W. L., Bakel, A. J., and Peeler, D. K., J. Nucl. Mat., 249, 175 (1997).Google Scholar
5 Abraitis, P. K., Vaughan, D. J., Livens, F. R., Monteith, L., Trivedi, D. P., Small, J. S., in Scientific Basis for Nuclear Waste Management XXI, edited by McKinley, I. G. and McCombie, C. (Mater. Res. Soc. Proc., 509, Pittsburgh, PA, 1998) pp. 4754.Google Scholar
6 Andrews, M.K. and Bibler, N.E., Ceram. Trans., Vol. 39, 205 (1993).Google Scholar
7 Crawford, C. L., Ferrara, D. M., Ha, B. C., and Bibler, N. E., in Proceedings of Spectrum /98, International Conference on Decommissioning and Decontamination and on Nuclear and Hazardous Waste Management, Denver, CO, September 13-18, La Grange Park, IL, 1998, pp. 581588.Google Scholar
8 Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste, Standard C1220-98, American Society for Testing and Materials, West Conshohocken, PA. (1998).Google Scholar
9 Buckwalter, C. Q., Pederson, L. R., and McVay, G. L., J. Non-Cryst. Solids, 49, 397412 (1982).Google Scholar