Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-12-01T08:55:20.700Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrical Properties and Noise of Poly SiGe Deposited at Temperatures Compatible With MEMS Integration on Top of Standard CMOS

Published online by Cambridge University Press:  01 February 2011

Sherif Sedky
Sherif Sedky*
Affiliation:
IMEC, Kapeldreef 75, B3001 Leuven (Belgium) Dep. of Engineering Physics, Faculty of Engineering, Cairo University, 12211 Giza, (Egypt)
Get access

Extract

The rapid development of MicroElectroMechanical Systems (MEMS) implied monolithic integration of these devices with the driving, controlling and signal processing electronics on the same CMOS substrate as this can improve performance, yield and reliability as well as lower the manufacturing, packaging and instrumentation costs. The post-processing route (fabricating MEMS on top of CMOS) is preferred as it avoids introducing any changes in standard foundry CMOS processes. Depending on the specific metallization type and the design requirements, post-processing limits the maximum fabrication temperature of MEMS to 450°C or 520°C [1], as this avoids introducing any damage or degradation to interconnects. This temperature constraint is quite strict for post processing surface micromachined MEMS, as it might affect relevant physical properties of the active element of MEMS such as crystallization, growth rate, mechanical properties, dopant activation, electrical resistivity, etc.. Polycrystalline silicon germanium (poly SiGe) is an attractive material for such applications due to its low amorphous to polycrystalline transition temperature, which can be as low as 400°C (with the appropriate germanium content). Furthermore, the mechanical properties of poly SiGe proved to be suitable for surface micromachining application [2]. In addition it is compatible with standard IC fabrication process, and hence it enables monolithic integration of MEMS with the driving electronics.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 729: Symposium U – MEMS and BioMEMS , 2002 , U3.2
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Sedky, S., Witvrouw, A., Bender, H. and Baert, K., “Experimental determination of the maximum post processing temperature of MEMS on top of standard CMOS wafers”, IEEE Transactions on Electron Devices, Vol. 48 (2), p. 1–9, February, 2001.Google Scholar
2. Sedky, S., Witvrouw, A., Saerens, A., Houtte, P. Van, Poortmans, J. and Baert, K., “Effect of boron in situ doping on properties of silicon germanium films deposited at 400°C”, Journal of Materials Research, 16 (9) p. 2607–2612, September, 2001.Google Scholar
3. Sedky, S., Witvrouw, A. and Baert, K., “Polycrystalline Silicon Germanium, a Promising Material for MEMS Post-Processing on Top of Standard CMOS Wafers”, The 11th International conference on solid state sensors and actuators, p. 988–991, June 11-14, 2001, Germany.Google Scholar
4. Sedky, S., Witvrouw, A., Caymax, M., Saerens, A. and Houtte, P. Van, “Effect of Deposition Conditions on the Structural and Mechanical Properties of Poly SiGe”, Material Research Society symposium proceedings vol. 609 A8.5–7, Spring 2000.Google Scholar
5. Kamins, T., Polycrystalline silicon for integrated circuit applications, Ch. 2, Kluwer Academic publications (1988).Google Scholar
6. Pierson, H. and Mullendore, A., “The chemical vapor deposition of boron at low temperatures”, Thin Solid Films, 83 (1), p. 87–91, September, 1981.Google Scholar
7. Sedky, S., Fiorini, P., Baert, K., Hermans, L. and Mertens, R., “Characterization and optimization of Infrared Poly SiGe bolometers”, IEEE transactions on Electron Devices, 46 (4), 675–682 April (1999).Google Scholar
8. Oppolzer, H., Falckenberg, R. and Doering, E., “Microstructure and sheet resistance of phosphorus-implanted annealed polycrystalline silicon films”, Microsc. Semicond. Mater. Conf. (Oxford, April, 1981), Inst. Phys. Conf. Ser. No. 60, section 6, p. 283–288.Google Scholar
9. VLSI Technology, edited by Giles, M. D. and Sze, S. M., 2nd edition, McGraw Hill, New York, 1988, p.235.Google Scholar
10. Mandurah, M. M., Saraswat, K. C. and Helms, C. R., Journal of Applied Physics 51, p. 5755 (1980).Google Scholar
11. Brederlow, R., Weber, W., Dahl, C., Shmitt-Landsiedel, D. and Thewes, R., “A physically based model for low frequency noise of poly-silicon resistors”, International Electron Devices Meeting 1998, technical digest, IEEE, Piscataway, NJ, USA; p. 1080, 1998.Google Scholar