Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-28T06:22:04.721Z Has data issue: false hasContentIssue false

Ce3+:CaSc2O4 Crystal Fibers for Green Light Emission: Growth Issues and Characterization

Published online by Cambridge University Press:  04 April 2014

Detlef Klimm
Affiliation:
Leibniz Institute for Crystal Growth, Max-Born-Str. 2, 12489 Berlin, Germany
Jan Philippen
Affiliation:
Leibniz Institute for Crystal Growth, Max-Born-Str. 2, 12489 Berlin, Germany
Toni Markurt
Affiliation:
Leibniz Institute for Crystal Growth, Max-Born-Str. 2, 12489 Berlin, Germany
Albert Kwasniewski
Affiliation:
Leibniz Institute for Crystal Growth, Max-Born-Str. 2, 12489 Berlin, Germany
Get access

Abstract

Ce3+ is known to show broad optical emission peaking in the green spectral range. For the stabilization of 3-valent cerium in ceramic phosphors such as calcium scandate CaSc2O4, often co-doping with sodium for charge compensation is performed (Na+, Ce3+ ↔ 2 Ca2+). At the melting point of CaSc2O4 (≈2110°C), however, alkaline oxides evaporate completely and co-doping is thus no option for crystal growth from the melt. It is shown that even without co-doping Ce3+:CaSc2O4 crystal fibers can be grown from the melt by laser-heated pedestal growth (LHPG) in a suitable reactive atmosphere. Reactive means here that the oxygen partial pressure is a function of temperature and pO2(T) rises for this atmosphere in such a way that Ce3+ is kept stable for all T. Crystal fibers with ≈1 mm diameter and ≤50 mm length were grown and characterized. Differential thermal analysis (DTA) was performed in the pseudo-binary system CaO–Sc2O3, and the specific heat capacity cp(T) of CaSc2O4 was measured up to 1240 K by differential scanning calorimetry (DSC). Near and beyond the melting point of calcium scandate significant evaporation of calcium tends to shift the melt composition towards the Sc2O3 side. Measurements and thermodynamic calculations reveal quantitative data on the fugacities of evaporating species.

Type
Articles
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Nakamura, S., Mukai, T., Senoh, M., Appl. Phys. Lett. 64, 1687 (1994).CrossRefGoogle Scholar
Pleasants, S., Nature Photonics 7, 585 (2013).CrossRefGoogle Scholar
Dorenbos, P., Phys. Rev. B 64, 1 (2001).CrossRefGoogle Scholar
Shimomura, Y., Kurushima, T., Kijima, N., J. Electrochem. Soc. 154, J234 (2007).CrossRefGoogle Scholar
Hao, Z., Zhang, J., Zhang, X., Lu, S., Wang, X., J. Electrochem. Soc. 156, H193 (2009).CrossRefGoogle Scholar
Philippen, J., Guguschev, C., Bertram, R., Klimm, D., J. Crystal Growth 363, 270 (2013).CrossRefGoogle Scholar
Get’man, O. I., Panichkina, V. V., Rud’, Z. P., Powder Metallurgy and Metal Ceramics 39, 584 (2000).CrossRefGoogle Scholar
Fejer, M. M., Nightingale, J. L., Magel, G., Byer, R. L., Rev. Sci. Instr. 55, 1791 (1984).CrossRefGoogle Scholar
Feigelson, R. S., J. Crystal Growth 79, 669 (1986).CrossRefGoogle Scholar
Philippen, J., PhD thesis, Technical University Berlin (2013). http://opus4.kobv.de/opus4-tuberlin/frontdoor/index/index/docId/4267 Google Scholar
Kovba, L. M., Lykova, L. N., Paromova, M. V., Kalinina, T. A., Dokl. Akad. Nauk SSSR 260 924 (1981); Dokl. Chem. (Engl. Transl.) 260 898(1981).Google Scholar