For many years, comprehensive data demonstrate a persistent lack of interest in the field of science, technology, engineering and mathematics (STEM) among students in European and North American countries. This lack of interest is regarded as one reason causing underrepresentation of diversity, especially that of female students within the field of STEM. Obviously, students—although possibly highly talented—refrain from choosing STEM careers only because their attention is not sufficiently attracted to STEM at the right time at the right place. In particular, this fact significantly affects the field of material research and, therefore, identifying opportunities for sparking students’ interest in materials is a crucial challenge in the framework of a modern STEM education. Here, we present the outline of the novel project “Metal Matters”, which aims at establishing an interdisciplinary approach to foster the field of materials in education. In essence, our research focusses on the omnipresence of metal as material. By exploring the K-16 continuum, we aim to identify windows of opportunities for raising awareness of the relevance of materials. Our approach is to stimulate interest in the relevance of materials by explicitly promoting metal as a topic across the curriculum. Our project is deliberately not restricted to STEM, but also covers history, society, economy, health, sports, literature, and language. Here, we present one part of the project contrasting the scientific relevance of metal with the students’ ideas about metal. For the present exploration and data collection, we employed a mixed-method design consisting of linguistic frequency analysis of scientific publications as well as the qualitative analysis of students’ written responses and drawings.

The synthesis of Platinum (Pt) nanoparticles by gamma irradiation is presented. The 0.1 M Pt solution of different concentration was prepared from K2PtCl4. The platinum aqueous solutions were irradiated by gamma radiation at a dose of 70, 90 and 120 kGy. The findings show the effect of irradiation on PtII solutions with different concentrations. The big black particles that are fairly agglomerated when the concentration was above 0.0050 M were observed. The UV-Vis spectrum of Pt of different concentrations shows a strong absorption peak at the wavelength 261 nm after irradiation, which indicates the presence of platinum nanoparticles. Furthermore, FTIR, XRD and HRTEM images also confirmed the presence of the nanoparticles produced by Radiolysis. The size of the Pt nanoparticles was found to be 7.39 nm.

Polycationic particles based on a degradable oligoester core are interesting candidate materials for the transfection of polyanionic macromolecules like DNA, which would enable the degradation after delivery of condensed molecules. Good transfection efficiencies can be obtained when the size of the polyplex (containing both polycationic nanoparticles and polyanionic macromolecules) does not exceed 120 nm. Therefore, here we explored how size, but also dispersity, and surface charge of these carrier systems can be adjusted by variation of the block copolymer composition or the presence and ratio of a co-assembly agent. Polycationic particles were obtained based on an amphiphilic triblock copolymer from oligo[(ε-caprolactone)-co-glycolide] (CG) functionalized with polyethyleneimine (PEI) and diblock copolymer based on poly(ethylene glycol) (PEG) modified with CG. A second series of particles was created, in which the oligoester blocks contained only ε-caprolactone units, therefore the effect of the presence of glycolide units was also studied. In both series, the ratio between di- and triblock copolymers was systematically varied. Nano-sized particles ranging from 34.5 ± 0.2 nm to 97.9 ± 0.3 nm with controllable positive surface charges between 2.9 ± 0.2 mV and 18.1 ± 0.5 mV were obtained by self-assembly in PBS solution under intensive stirring. The incorporation of PEG-C diblock copolymers resulted in an increase of particle size, however no specific relation between composition, size, and polydispersity was observed. In case of PEG-CG diblock copolymers a rather systematic increase of the particles’ size with increasing content of diblock copolymer was shown. Furthermore, with a decrease of content of diblock copolymer in the particle structure zeta potential strongly increased. Additionally, the content of glycolide units in triblock copolymer increased the zeta potential of PEI-CG-PEI-based particles in comparison to PEI-C-PEI-based ones. Therefore, obtained particles could be used as potential target-oriented polycationic macromolecules for carrier systems.

In the current work, we evaluate the influence of the processing parameters on the electrical properties of aluminium zinc oxide (AZO) thin films produced by airbrush spray-pyrolysis deposition technique. Spray-deposited AZO thin-films were produced with Al:Zn molar ratios varying from 0 % (pure ZnO) up to 30 %, using aluminium acetate and zinc acetate as organic precursors and water as solvent. Thermogravimetric analysis (TGA) and infrared spectroscopy (FTIR-ATR) were used to monitor the metal-oxide formation from the organic precursors as a function of the temperature. The results show that a temperature of 400 °C is necessary to completely degrade the organic phase and to obtain the desired inorganic metal-oxides films. The electrical properties of the TMOs were evaluated by d.c. current-voltage (I-V) analysis using planar thermally evaporated Al electrodes on top of the TMO layer, with different aspect ratios (1/18, 2/9, 5/13, 5/9 and 8/9). The lowest sheet resistance was obtained for AZO films at a molar Al concentration of 5 %. We also observed that, after carrying out a post-annealing treatment (30 mbar, 150 °C) the samples presented a decrease on the sheet resistance superior to 60 %, in comparison to the samples before the treatment.

Here we report the use of luminescence thermometry to measure the temperature decay from single gold structure into the substrate of AlGaN:Er3+ film. We looked at Er3+ ion photoluminescence upon illumination by modulated 532 nm laser and recorded time-resolved luminescence of 2H11/2 → 4I15/2 and the 4S3/2 → 4I15/2 energy transitions. We calculated the heat generated from gold microdisk and observed the rate of heat dissipation to the environment. We directly calculated the absolute thermal conductivity of 1.7 W/mK for AlGaN: Er3+ film which was in agreement with the literature.

Three dimensional X-ray diffraction (3DXRD) microscopy is a powerful technique that provides crystallographic and spatial information of a large number, of the order of thousands, of crystalline grains in a sample simultaneously. A key component of every 3DXRD microscopy experiment is the near field detector that provides high resolution spatial information of the grains. In this work we present a novel design for a semi-transparent, 16 megapixel near field detector. As opposed to a typical single scintillator phosphor detector, this design, we call the Quad Near Field Detector, uses four quadrants. It has a total field of view is 5.3 mm x 5.3 mm with an effective pixel size of 1.3 µm x 1.3 µm. The detector’s relatively large field of view can be used to obtain higher order diffraction spots which we anticipate will lead to improved spatial resolution in grain reconstructions. The large field of view can also enable the detector to be positioned further from the sample, in this way increasing the working distance and enabling larger environmental cells for in-situ studies. Many alignment parameters can be resolved by careful mechanical design. For this reason a novel translation stage for focusing the microscopes was developed, tested, and implemented. The near field detector was calibrated and characterized at the Cornell High Energy Synchrotron Source. The operational feasibility of such a multi-plate detector demonstrated in this work paves the way for new technologies in instrumentation of 3DXRD microscopy.

Hydroxyapatite (HA)/nanotubular titanium dioxide (TiO2) composite coatings loaded with antibiotics were developed to combine biocompatibility and antibacterial property. TiO2 nanotubes were first fabricated on Ti plates using anodization techniques. Then HA nanocrystals were synthesized on the TiO2 nanotubes by electrochemical deposition, followed by loading of a model drug compound, streptomycin. The streptomycin release profile of the composite coating was investigated. Bacterial tests demonstrate that the streptomycin-loaded composite coatings were highly effective in inhibiting bacterial growth. Simulated body fluid (SBF) experiments indicated that the composite coatings possessed good osseointegration capability.

Demand for newer, stronger, stiffer, yet lighter-weight and environmental friendly (biodegradable) materials in the fields such as automobile for non-structural applications are ever increasing. The principal reasons for using natural (cellulosic) fibers is they possess several attractive properties such their economic feasibility, enhanced sustainability, good specific mechanical properties, and desirable aspect ratio for good performance after melt-processing. Natural fiber composite materials are now being rapidly utilized in automobile industries, and they have become the forefront of research and development activity. An interesting alternative for reinforcing soft polymeric matrices with short fibers is the use of cellulose fibers which show remarkable reinforcing effects in thermoplastics such as polypropylene. The current study made an attempt to investigate the suitability of sisal fibers for automobile industry for non-structural and low-strength interior applications. In this work native sisal fibers were extracted and the effect of alkali treatment on their morphological, tensile, moisture absorption and thermal properties were studied. Scanning electron micrographs indicated roughening of the surface of the fiber strands due to the removal of the hemicellulose layer on alkali treatment. The maximum weight-gain for the composite prepared from treated fibers was 2.12 %, while that for the composite prepared from untreated fiber was 4.33 %. From the thermograms, the results indicate initial degradation for the treated fiber to have improved from 174 °C to 230 °C (56 °C shift) when compared to the untreated fiber. This fiber has competitive advantages when evaluated with other natural fibers. A polymer composite was processed from the chemically modified fiber, profiled against equivalent material systems in Ashby material property charts exhibited its suitability for light, low strength and low flexure material applications which can use a potential replacement of fibres being used currently.

We report on the exploration of perpendicular exchange bias in iron platinum/nickel oxide (FePt/NiO) bilayer thin films grown using pulsed laser deposition (PLD) on MgO (100) substrates. Exchange bias is an important property for giant magnetoresistance, and, as such has promise for applications in spin valves, magnetic sensors and magnetic random access memory. The magnetic L10 phase of FePt is known for having high perpendicular magnetic anisotropy, tunable coercivity/grain size and large magnetic storage density. The FePt layer was first deposited directly on MgO, followed by the deposition of the NiO layer on top of the FePt layer. The coercivity of the L10 FePt layer was tuned during growth to form a hard or soft magnetic layer. The FePt/NiO thin films grown for this study exhibit perpendicular exchange bias at 5K, as quantified using our SQUID measurements. XRD confirms parallel plane ordering between the MgO (200), FePt (002) and NiO (111) atomic planes while cross sectional TEM confirms the epitaxial growth of L10-FePt(001)<100>//MgO(100)<001> and the preferential growth of NiO on top of the FePt. Films of only FePt were grown to examine the surface architecture of the ferromagnetic layer and thus the interface of the FePt/NiO bilayer. The results from our XRD, TEM and magnetometry characterization of the FePt films and FePt/NiO bilayer thin films will be discussed.

Cr-doped higher manganese silicides (HMSs) (Mn1-xCrx)Si1.75 (x = 0–0.35) have been prepared by repeated sintering from raw elemental powder using spark plasma sintering. The a- and cMn-axis length increases with increasing Cr content x. The results of powder X-ray diffraction and microstructural observation suggest that impurity phases, e.g. (Mn, Cr)Si and CrSi2, exist in the samples with x = 0.20 or above. The electrical resistivities and Seebeck coefficient decrease with increasing Cr content x. The Cr content x of 0.10 indicated the largest power factor at 850 K (1.39×10-3W/mK), followed in order by x of 0.25, 0, 0.05, 0.15, 0.20. To confirm the effect of Cr-doping on outputs of modules, two paired p-n modules consisting of n-type purchased Mg2Si and p-type Cr-doped HMS with x = 0, 0.05, 0.10, and 0.20 elements were prepared. The module consisting of (Mn0.9Cr0.1)Si1.75 showed the highest output, that is, 845 mW at 873 K on the hot side. There was approximately 8% improvement compared with that of the module consisting of Cr-free elements.

The formation mechanism and chemical form of insoluble C-14 found in PWR need to be examined in order to predict its environmental behavior after disposal. This study investigates the alteration of ion-exchange resin by heating and irradiation, because past studies indicated the ion-exchange resin may be the origin of insoluble C-14.

Resin was heated at 300 °C in solution with low oxygen content to simulate the environment of PWR coolant. The sulfo group was found to detach within 8 h, and structures similar to polystyrene were remained. This is followed by detachment of H from the alkyl group, condensation reaction, and the formation of amorphous carbon-like structure. After heating for 24 and 96 h, the resin was irradiated by 60Co γ-rays in the solution. The FT-IR and TG measurements after irradiation suggested that OH and COOH groups were formed on the surface of the resin. These functional groups may be involved in reactions that finally form the amorphous carbon.

In addition, the characteristics of heated and irradiated resin were compared to real insoluble-C (CRUD) sample in PWR (in Appendix).

We developed a new type of polymer descriptor based on Extended Connectivity Fingerprints. The number densities, that are substructure numbers divided by the number of atoms in a polymer model, were employed. We found that this approach is superior in accurately predicting linear polymer properties, compared to the conventional approach, where just the substructure numbers are used as descriptors. In addition, dimension reduction and multiple replication of repeat unit were found to improve prediction accuracy. As a result, the novel descriptor based on the Extended Connectivity Fingerprints with machine learning approaches was found to achieve accurate prediction of the refractive indices of linear polymers, which is comparable to that by ab initio density functional theory. Although process-dependent properties such as mechanical properties were difficult to predict, the present approach was found to be applicable to prediction of substructure-dependent properties, for example, optical properties, thermal stabilities.

Point-of-care systems require highly sensitive, quantitative and selective detection platforms for the real-time multiplexed monitoring of target analytes. To ensure facile development of a sensor, it is preferable for the detection assay to have minimal chemical complexity, contain no wash steps and provide a wide and easily adaptable detection range for multiple targets. Current studies involve label-free detection strategy for relevant clinical molecules such as heme using G-quadruplex based self-assembly. We have explored the measurement of binding and kinetic parameters of various G-quadruplex/heme complexes which are able to self-associate to form a DNAzyme with peroxidase mimicking capabilities and are critical to nucleic acid research. The detection strategy includes immobilizing the G-quadruplex sequences within a polymer matrix to provide a self-assembly based detection approach for heme that could be translated towards other clinically relevant targets.

Alloys of the CuAlS2 – CuFeS2 system were prepared by thermobaric treatment at high pressure of 5.5 GPa and temperatures ranging from 573 to 1573 K and phase formation in the system was investigated using X-ray powder diffraction, optical microscopy and scanning electron microscopy equipped with energy dispersive spectroscopy. The unit-cell parameters (the lattice constants and the unit-cell volume) were computed as a function of the composition. Absence of complete solubility in the (CuAlS2)1-x-(CuFeS2)x system was established. Formation of solid solutions with the tetragonal structure of chalcopyrite was detected for compositions with the molar part of CuFeS2 x not exceeding 0.10.

An as-deposited film with a Cr compositional gradient (22–15 at.% Cr) was immersed in 22.5% HNO3 for 15 hours. In the part of the film with initial Cr content in the range of 22–18 at.%, Cu dealloying resulted in sufficient Cu dealloying (final Cr content = 33–80 at.%) without film dissolution. Using the film with optimal initial composition Cu82Cr18, we successfully fabricated a nanoporous film with a pore size in the range of 20–40 nm. As a result of the formation of Cr2O3 during dealloying, this film was transparent and exhibited an insulation state. The novel nanoporous film is expected to be applied as a nanofilter in moisture-in-oil sensors.

Hydrogenated microcrystalline Silicon-Germanium (μc-SiGe:H) thin films were deposited using the Plasma Enhanced Chemical Vapor Deposition (PECVD) technique from a gas mixture of SiH4, GeH4, H2 and Ar at a substrate temperature of 200 ° C. The films were deposited at a pressure of 1.5 Torr, while the RF power was varied in the range of 20 W to 35 W. Structural, optical and electrical characterization was performed in the films, Fourier Transform Infrared Spectroscopy (FTIR) was performed in order to analyze the hydrogen bonding of silicon and germanium, while Raman spectroscopy was used in order to analyze the crystallinity of the films. Through the optical and electrical characterization of the films, parameters such as the optical band gap (Eg) and the activation energy (EA) were obtained, respectively. The conductivity of the films changed up two to orders of magnitude from dark conditions to illumination AM 1.5. Finally, the correlation between deposition RF power and the film properties is presented.